Ok, this is my first post so forgive if this is in the wrong section...
I have a friend's Galaxy Note 2 ATT that was stuck on the Galaxy Note 2 Boot screen, and it wouldn't go any further.
Because I work for Samsung at the Samsung Experience Shop, I tried running it through our smart reflash tool
-----> This didn't work because it would fully download it onto the phone, but when it got to the Android with the thing spinning in its chest, it would stop and ALWAYS freeze halfway.
Next step I tried doing was going through Samsung Kies and downloading the stock OS and load that, but the same Android with the spinning thing in its chest would show up and it would freeze.
Due to this guy being my friend I told him I would try anything to get his phone to work again (root, to custom recovery, to custom rom)
My steps so far:
1. I have successfully rooted my device via ODIN 1.85 by using CF-Auto-Root
2. Afterwards, I loaded on a custom recovery via ODIN 1.85 which now is philz_touch_6.07.9
Here is my problem now, I've tried searching everywhere and I can't really find the answer...
Whenever I try to side load a rom through ADB through Android tools (its in the right directory and everything because it transfers over), I keep getting an error message "E: Error in /tmp/update.zip (status 7) Installation Aborted."
Now before I get that error I get stuff like getprop("ro.product.device")==t0lte" ||getprop("ro.build.product").... etc. and it goes on and on.
So far the ROMs that I have tried were Cyanogenmod 10.1 and the Pacman Rom, and yes, both are for the correct device like the model name/number match up. And now how I said I thought I rooted the device, whenever I try to reboot into recovery via Philztouch, it says at the top Root Access is missing. Root device, and I click yes. When it reboots into recovery and I want to turn the phone off again, it still says Root Access is missing.
I am open for anything really. My friend just wants his phone to work again. and I've literally exhausted all of my ideas as I keep running into the same issue.
What am I doing wrong? and is something like this possible to fix? Or is my friend SOL?
Thanks for all the help. It's much appreciated.
Your recovery is outdated. Status 7 error.
I use TWRP from the original development section.
rangercaptain said:
Your recovery is outdated. Status 7 error.
I use TWRP from the original development section.
Click to expand...
Click to collapse
+1 to this^^^^^
Look here»»» http://forum.xda-developers.com/showthread.php?t=1981198
And why not give him something stock instead of a CM Rom??[emoji37]
Plenty of stock 4.3 Rom's in the development section...
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Good advice ^^^^ for your friend.
Ok, thanks for the direct response. I've downloaded the latest TWRP recovery and when I try to push it through ODIN, I still have PhilZ Touch 6..? Sorry, I feel like I'm skipping something simple...
according to a guide, I have to make sure when I'm pushing a custom recovery through ODIN I have to leave Auto Reboot and F. Reset Time UNCHECKED. I made sure they were, and for some reason after it says PASS and thread successful 1 failed 0. When I disconnect the phone and turn it back on into recovery mode, I still has PhilZ Touch...
Use your recovery to flash TWRP. There's a zip version and an odin version.
Ok, I got stock recovery on there just by redoing the CF-Auto Root package through ODIN.
I figured well I can apply the ROM the adb through the stock recovery...
It was going well until I got this error. The last line before the error stated:
"Veryfying update package..."
Error:
E: failed to verify whole-file signature
E: signature verification failed
is that due to the fact that i'm using stock recovery?
In the mean time since that didn't work I'm going to flash TWRP and hopefully that fixes the issue.
I'm kinda just documenting my steps here in case anyone wants to follow and chime in if i'm doing something wrong.
Thanks for the help guys!
************3AM EDIT*****************
Ok so I managed to get TWRP 2.7 on the device as I needed the ability to adb sideload the update.zip to the phone since I can't boot into the phone's OS whatsoever.
This is the error I'm receiving now:
Checking for MD5 file...
Skipping Md5 check: no MD5 file found.
then it restarts and I'm stuck at the Samsung GALAXY Note II screen... what's my next step..? Find a different ROM?
**********Another Edit**************
It has just come to me, I shouldn't have to adb sideload the update.zip or the custom rom... even though I can't get into the phones OS and can't copy and paste to the root of the device. Can't I just copy and paste it to a micro SD card and mount that, and then apply the update from there? And as far as those errors I had earlier, I'm still not sure why I received them...
Again, thanks for all the help
Adb won't work if USB debugging wasn't enabled.
In TWRP you can disable md5 checking.
And you don't unzip the zip file.
Thanks for the reply. ADB didn't work because, in fact, since I haven't been able to turn the phone on, I know USB debugging isn't turned on.
And as far as having the MD5 check, it is unchecked.
I received a success message. However, when I try to boot the phone it still gets stuck at the Samsung Galaxy Note II screen.
******Edit******
Ok ended up using a different ROM, I think PacMan rom? It seemed to work until it got to extracting system files and then the phone sits for a couple minutes, screen turns black. And when I try to wake the screen, only the back and menu buttons come up...
Another thing, even though I've already rooted my device using CF-Auto-Root, When I reboot my device with TWRP I go to reboot and then recovery. Then it warns me saying no OS bla bla bla, and then it says it notices that my phone isn't rooted? And that SuperSU isn't on the device. It asks to install it by swiping. I swipe it starts to install, phone reboots. When I reboot it again, it still tells me that the phone isn't rooted. And with the phone not being rooted, I'm coming to the conclusion why I'm having trouble trying to flash Roms.. Is this a possibility?
Why are you using ADB? just drop the .zip for the ROM you wish to flash onto a micro SD card, and flash from within the TWRP. Don't try to extract the .zip whatsoever.
Related
Hi. So I was rooting my Note2 using the video from the tethering post. I used Odin and ran the openrecovery-twrp-2.3.1.1. It gave me the green Pass message. But when I boot into recovery, I don't get the nice interface, I get the Android System Recovery <3e> screen with text only options. With this I can apply CWM-SuperSU but it gives me an error, but says it installs fine. But when I run SuperSU, it errors out because there are no binaries installed. I even redid the Odin and use the 2.3.1.4 version of twrp, but same exact thing. I even tried flashing twrp from the Recovery but still the same.
Anyone have any advice or tips? I'm sure I'm just missing one step or something. THANKS!
I have Cyanogenmod 10.1 (stable) installed; the other day it crashed while I was on Instagram, rebooted itself, and wouldn't go past the spinning circle screen. Tried rebooting it, now it won't go past the screen before that, with the blue Cyanogenmod man and the Samsung logo.
I have TWRP 2.5.0.0 installed with it, which I don't know how is possible being that the file systems are incompatible, so unless I used Odin to install CM10.1, I don't know how I did it without installing Clockworkmod Recovery over TWRP.
I've been trying to fix it for a couple days now (I'm kicking myself for not getting around to posting here sooner). When I go into TWRP it asks me for a password (which I've never set, I assume it's asking me because that's all it knows to do when the file system is incompatible), which I click cancel at every time, and when I try to do just about anything (including installing new ROMs or recoveries from within TWRP) it gets errors when trying to mount any partitions on the device, so I can't change anything on the phone at all.
I've tried re-installing TWRP AND Clockworkmod Recovery with Odin, and they succeed, but when the phone tries to reboot, the screen just turns off and nothing happens, and I have to take the battery out to do anything else.
So right now I'm totally screwed unless I can fix this thing. I'd like to not have to drop 200 on a Nexus 4 after only a year or having this phone I bought brand new, especially with the Nexus 5 already coming out later this year...can somebody help me???
EDIT: I should clarify that I can access recovery and download mode
If you can get into download mode you can flash a stock image to your phone and restart from scratch. Download the proper stock image from here http://forum.xda-developers.com/showthread.php?t=1968625 and flash it in odin.
FoxTrotz said:
If you can get into download mode you can flash a stock image to your phone and restart from scratch. Download the proper stock image from here http://forum.xda-developers.com/showthread.php?t=1968625 and flash it in odin.
Click to expand...
Click to collapse
I should've clarified that I've tried this with a bunch of roms, and it just shows SBA2 in the status box forever. I left it for a full hour before and it never changed.
According to this page http://www.alliance-rom.com/community/wiki/bricked-android/ reformating your external sd card may help. It also links to something I personally have never heard of but apparently this: http://forum.xda-developers.com/showthread.php?p=15330252 can help unbrick any samsung phone that's flashable with odin.
My daughter's note 2, which looks to be in perfect condition, was running dirty unicorn. She messages me in a panic because the phone turned off on her, and wouldn't reboot.
I could get into recovery, but many of the options like factory reset wouldn't work. Reformatting /cache gives an error with ext4 and can't write, and at the bottom of some of the screens is an error about unable to access some log files in the /cache directory. Going to install zip to reinstall dirty unicorn doesn't seem to do anything, it can't find any files.
Wipe system gives errors like "format_volume: make_extf4fs failed on /dev/block/mmcblk0p12". It can't mount /data, just gives an error.
I tried reflashing the stock mj4 via odin, which ran successfully, but didn't resolve anything.
Tried using KIES 2.6, which did go into download mode and said it downloaded a bunch of stuff and then flashed the phone, but it's still stuck at the bootloader.
I tried flashing a bootloader, but am unclear of how to flash the param file if necessary (does it go in bootloader? PDA? what slot in odin?).
I need some ideas. Maybe the flash has died on it, and it's unrecoverable, but it's in such perfect shape that I hate to just toss it.
I have recover 6.0.4.3 (CWM) installed, and can still get into it. But upon loading recovery, it gives me errors like "Can't mount /cache/recovery/command", "Can't open /cache/recovery/last_log", etc.
Any help appreciated.
mrcpu said:
My daughter's note 2, which looks to be in perfect condition, was running dirty unicorn. She messages me in a panic because the phone turned off on her, and wouldn't reboot.
I could get into recovery, but many of the options like factory reset wouldn't work. Reformatting /cache gives an error with ext4 and can't write, and at the bottom of some of the screens is an error about unable to access some log files in the /cache directory. Going to install zip to reinstall dirty unicorn doesn't seem to do anything, it can't find any files.
Wipe system gives errors like "format_volume: make_extf4fs failed on /dev/block/mmcblk0p12". It can't mount /data, just gives an error.
I tried reflashing the stock mj4 via odin, which ran successfully, but didn't resolve anything.
Tried using KIES 2.6, which did go into download mode and said it downloaded a bunch of stuff and then flashed the phone, but it's still stuck at the bootloader.
I tried flashing a bootloader, but am unclear of how to flash the param file if necessary (does it go in bootloader? PDA? what slot in odin?).
I need some ideas. Maybe the flash has died on it, and it's unrecoverable, but it's in such perfect shape that I hate to just toss it.
I have recover 6.0.4.3 (CWM) installed, and can still get into it. But upon loading recovery, it gives me errors like "Can't mount /cache/recovery/command", "Can't open /cache/recovery/last_log", etc.
Any help appreciated.
Click to expand...
Click to collapse
The other weird thing is that I used odin 3.06 to flash twrp 2.8.5, or at least attempt to, download processed, device reset, but recovery is still CWM 6.0.4.3. WTH?
Ok check this thread where I just helped fix a note 2, simular to your situation ok.
Plenty of links in there for you. Keep in mind everything in this thread I'm sending you too it's for the AT&T i317 ok.
http://forum.xda-developers.com/showthread.php?p=59000961
Which I'm sure that is what you have, posting your problem in the Att q&a thread.
Bajanman said:
Ok check this thread where I just helped fix a note 2, simular to your situation ok.
Plenty of links in there for you. Keep in mind everything in this thread I'm sending you too it's for the AT&T i317 ok.
http://forum.xda-developers.com/showthread.php?p=59000961
Which I'm sure that is what you have, posting your problem in the Att q&a thread.
Click to expand...
Click to collapse
Correct, it is an AT&T. I have tried the options in that thread, but I swear, nothing I flash actually "sticks". I've used odin 3.06, put the files in PDA, plugged it in in download mode, the progress bar appears on both odin and the phone, it resets, it reboots, and nada. Hung.
I can't even flash a replacement recovery, nothing "sticks". I've used KIES to flash, it tells me it's successful, but I still have CWM 6.0.4.3. I've tried the original 4.1.1, NJ1 (rooted), I've tried flashing a bootloader, then tried the one with the param file attached, I downloaded a pit file, followed the directions on that page with the Re-partition option, and I still can't get anywhere with it.
If I cold even just get a different recovery installed, just so that I *know*, my odin is OK, then I'd feel better about making progress.
I've tried to flash philz_touch 6.48.4, openrecovery-twrp-2.8.5 through odin, and I can't even get the CWM recovery replaced. Odin reports success, reboots the device, frozen.
I swear, if this was one of my servers at work, I'd figured the NSA has hacked the firmware to just discard writes and report back success.
I'm not crystal clear in ODIN how to flash bootloaders, on one hand, presumably, the "bootloader" button, but one guide shows the bootloader file being put in PDA, so who knows. I may have ended up with a bootloader mismatch, but I thought flashing the latest stock recoveries.
FWIW, the phone was running Dirty Unicorn, although I'm unsure of specifically which version, she's had it for a while.
Thanks for any help.
Just realized something.
If I hold down the power/vol down/home and boot into download mode, I get the little red "odin mode" at the top left, 4 lines of text about custom, etc, and then the green android icon.
If I boot into recovery, then use it to boot into download mode, the green android is there, but none of the text (odin mode, etc) is on the screen. Is this normal?
I have also been having some strangeness with my Telus Note II. Very similar symptoms to what you're describing. One morning I woke up to my phone stuck on the Samsung logo as the phone must have rebooted itself overnight. When I tried to reboot it would freeze at the same spot once again. I tried to go into recover (TWRP) and it wouldn't, and a subsequent reboot left me in a boot loop.
Nothing I tried would help. I couldn't get into TWRP. Using ODIN 3.07 I put on CWM and I was able to get into recovery now, but nothing in it worked. Finally I tried using ODIN to put on CF-Auto-Root-t0ltecan-t0ltevl-sghi317m and I was finally able to get into a recovery that allowed me to do a factory reset. Once I did that I was able to boot up the phone.
I then re-installed TWRP and restored a back up that I had, and everything was normal again. The phone was running great. However, sometime at night things get messed up again. The phone has either reboot itself, and get's stuck again. I then have to repeat this whole process. During the day, the phone runs amazing. It almost seems to run better than before. However at night, if I'm on battery it will get messed up again.
I hope this helps you. Good luck.
have you tried all this using the same computer and usb cable? i would try a different computer, port, usb and re download all files again. perhaps use a different version of odin. good luck:fingers-crossed:
It's the same computer and cable I do my Note 3, and kindle fire 8.9, and with a different cable my nook HD, so I'm skeptical that it's any of those pieces, but for the heckuvit, I will try a different one.
Note 2 GT N 7100 --Stuck on CWM 6.0.4.3
gizhola said:
I have also been having some strangeness with my Telus Note II. Very similar symptoms to what you're describing. One morning I woke up to my phone stuck on the Samsung logo as the phone must have rebooted itself overnight. When I tried to reboot it would freeze at the same spot once again. I tried to go into recover (TWRP) and it wouldn't, and a subsequent reboot left me in a boot loop.
Nothing I tried would help. I couldn't get into TWRP. Using ODIN 3.07 I put on CWM and I was able to get into recovery now, but nothing in it worked. Finally I tried using ODIN to put on CF-Auto-Root-t0ltecan-t0ltevl-sghi317m and I was finally able to get into a recovery that allowed me to do a factory reset. Once I did that I was able to boot up the phone.
I then re-installed TWRP and restored a back up that I had, and everything was normal again. The phone was running great. However, sometime at night things get messed up again. The phone has either reboot itself, and get's stuck again. I then have to repeat this whole process. During the day, the phone runs amazing. It almost seems to run better than before. However at night, if I'm on battery it will get messed up again.
I hope this helps you. Good luck.
Click to expand...
Click to collapse
Dear friends, sorry for my interference, i having CWM recovery v 6.0.4.3 on GT N7100, i used to flash omega ROM 4.3, everything went well until i got stuck on Samsung log and the phone did want restart, i decided to go on CWM recovery, stunned with this message
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
Still I can go on download mode, I tried use odin to flash stock rom but failed it takes me always to CWM v 6.0.4.3 where it stuck and dont allow me to format or do any thing except my external sd1 that I tried to flash from but returned to same prob ( CWM v 6.0.43)
also I tried to flash tried twrp 2.8.0.4 but failed
the prob is my internal sd can't be mounted and whatever i do don't pass
I read in your post something about flashing auto root in odin or fix CWM root
can you help please Im stuck in CWM v 6.0.4.3
Please don't refer me to any more threads or forums........
I'm sure this has been done and done and talked about but I've been reading the **** out of forums and comments for a few hours now and trying to unroot my Sprint LG G2.
I had it running stock like a champ. rooted it. worked great. then I was attempting to flash lollipop and it required a recovery update (No Problem) I downloaded the correct files and bam! it says your phone is not rooted this requires a root (or something like that) I was already rooted SuperSU installed and root checker said I was fine. so what the hell I swipe to root while inside recovery and it goes to some black screen with tiny text saying fastboot: processing commands and won't leave the screen. I tried booting into recovery and same thing happens. Tried to reboot normal and I'm stuck on the LG logo with my led flashing between blue and green slowly. I CAN boot into download mode and I'm following this
http://pastebin.com/WTm1xFXz
and this
http://forum.xda-developers.com/showthread.php?t=2687929
to unbrick but having this error "Failed PreviousLoad()
Did I not get the right .dll file? I doubt it cause I only saw one...or is it the wrong .tot file? there was 3 or so
http://downloads.codefi.re/autoprime/LG/LG_G2/LS980/Stock_Firmware
Please help!
When i'm in download mode the phone does say I am rooted. is there a way to just re-flash recovery and restore from my backups I did before all this? if I have to wipe this thing clean and start over I don't really mind I just need to get my phone back haha this is the first time this has ever happened to me and I consider myself tech savvy so idk what I did here (except re rooting in recovery like an idiot) thanks so much!
First question, is the download mode you see with a small status bar or the big one?
If you have the big one, download mode should work. The f flash software will verify the tot file. If that goes through you should be golden.
When it asked you in TWRP to root, that is a message telling you system or ROM file did not take.
If you want cm12, use zv8 tot. Root, auto-rec, update TWRP with blastgator bumped TWRP 2.5.1. Flash cm ROM or aosp, then gapps. And go
My Galaxy Note 2 is stuck at the Start up screen screen. Where its an all black bg and simply says Samsung Galaxy Note II
I have tried using recovery mode, cleared cache, and reset to factory. Neither troubleshoot method worked.
I have tried numerous Odin autoroots. none work. Whenever I try to root it fails. Im guessing it might be because I dont have Dev Debug enable and I cant get into my phone to enable it. because of this issue
I have tried looking for TWRP .tar but every file I download the file is always a .img
The Model of the phone is a SGH-T889 (T-mobile Note II)
I am all out of ideas, and I dont know what to do. I have been search for answers for hours and everytime I think I found a solution it doesnt work.
What ROM was your phone on when this happened ?
Can you get int to download mode ? If yes try flashing stock ROM and see if it helps.
ciphercodes said:
What ROM was your phone on when this happened ?
Can you get int to download mode ? If yes try flashing stock ROM and see if it helps.
Click to expand...
Click to collapse
It was on the offical default rom. the phone was never modded, or rooted.
My niece downloads a bunch of kiddie games onto the phone, we constantly have to uninstall them. My thoughts and the T-mobile tech suspects that it the crash may have been caused my too many updates or a bad updated file most likely due to the games or game.
I can get the phone into download mode, and recovery mode.
In reovery mode I have 6 options
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cashe partition
apply update from cache
I have tried Apply update from cache, Wipe cache partition, then Wipe data.factory reset. I also attempted to put a CF auto root .md5 file and a KIES .md5 file which I believe is a stock firmware file on a SD card. to try to use the apply update from external storage option, but neither file showed up when I went into the option. So I guess I didnt have the right sort of file.
So recovery didnt work so I tried using Odin v3.07 and Odin v3.09 with CF auto root files for the SGH-T889, that didnt work, ecerytime I tried to apply it, It was always Fail within seconds. I tried other root files that are made for other versions of the Galaxt Note 2 like the GT-N1700 but those also simply failed.
I tried using what I believe to be stock frimware files with Odin. and those also Failed.
Im not exactly the best person with these. I learn mostly what I know from the internet and reading various forums, youtube videos, and other people experiences. I cannot find anyone who's problem has not yet been fixed through the above methods. so I really dont know where to go from here.
I think the reason I cant Flash from PC is because it might be possible USB Debugging is not enabled. Not sure if this is what is causing all the Fails in odin
BramaKnox said:
It was on the offical default rom. the phone was never modded, or rooted.
My niece downloads a bunch of kiddie games onto the phone, we constantly have to uninstall them. My thoughts and the T-mobile tech suspects that it the crash may have been caused my too many updates or a bad updated file most likely due to the games or game.
I can get the phone into download mode, and recovery mode.
In reovery mode I have 6 options
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cashe partition
apply update from cache
I have tried Apply update from cache, Wipe cache partition, then Wipe data.factory reset. I also attempted to put a CF auto root .md5 file and a KIES .md5 file which I believe is a stock firmware file on a SD card. to try to use the apply update from external storage option, but neither file showed up when I went into the option. So I guess I didnt have the right sort of file.
So recovery didnt work so I tried using Odin v3.07 and Odin v3.09 with CF auto root files for the SGH-T889, that didnt work, ecerytime I tried to apply it, It was always Fail within seconds. I tried other root files that are made for other versions of the Galaxt Note 2 like the GT-N1700 but those also simply failed.
I tried using what I believe to be stock frimware files with Odin. and those also Failed.
Im not exactly the best person with these. I learn mostly what I know from the internet and reading various forums, youtube videos, and other people experiences. I cannot find anyone who's problem has not yet been fixed through the above methods. so I really dont know where to go from here.
I think the reason I cant Flash from PC is because it might be possible USB Debugging is not enabled. Not sure if this is what is causing all the Fails in odin
Click to expand...
Click to collapse
Lets see if we can get this resolved.
1) Do you remember what version of Android the phone was on 4.3 or 4.1.2 ?
2) Put your phone in download mode then connect to your computer via usb. Start Odin in admin mode (right click and run as admin).
3) Now do you see ID:COM section turn blue ? Under message you can see "Added!". If you see this then phone is recognized by Odin.
4) If your phone was on 4.3 then download this most up to date firmware - from here http://www.sammobile.com/firmwares/download/22863/T889UVUCMK7_T889TMBCMK7_TMB/
5) Once downloaded, extract the file(use 7zip or winrar), once extracted you will see a file with .md5 extension.
6) Now going back to ODIN, click on PDA and then browse to this file which you just extracted.
7) This takes some time, once done you should see a message like "Checking MD5 finished successfully", "Leave CS".
8) You can leave Auto reboot and F-reset time checked.
9) Now click Start and let the process finish.
10) If everything goes fine you should see a green message "Pass"
Let me know how it goes.
I have the same problem as the OP (boots only up to Samsung logo with black bg) but it was not caused by niece downloading games but instead from trying to install jedi masterx2 rom.
I did what ciphercodes recommended and put phone in download mode and odin went through the motions of installing the stock os (in my case version 4.3) but after apparently installing the rom it again booted up to Samsung note II logo in black bg.
luckily I can install either Clockword mod recovery v6.0.4.3 or teamwin v2.8.6.0
The clockword mod recovery can read the external sd card (whereas funnily enough the teamwin can't) and I can attempt recovery from previous backups on cmr or to install a rom from zip file but neither of these work - reboots again to Samsung logo in black background after apparently installing the rom.
both teamwin and cwr mention that they can't mount system and that's probably why no rom is install either using cwr or odin so my guess is that I have to reformat the partitions cause probably efs file is corrupt but I don't know how to do that and I have done extensive search in google but have not found a solution
so ciphercodes if you or anyone reading this can help please reply to this message
ciphercodes said:
Lets see if we can get this resolved.
1) Do you remember what version of Android the phone was on 4.3 or 4.1.2 ?
2) Put your phone in download mode then connect to your computer via usb. Start Odin in admin mode (right click and run as admin).
3) Now do you see ID:COM section turn blue ? Under message you can see "Added!". If you see this then phone is recognized by Odin.
4) If your phone was on 4.3 then download this most up to date firmware - from here
5) Once downloaded, extract the file(use 7zip or winrar), once extracted you will see a file with .md5 extension.
6) Now going back to ODIN, click on PDA and then browse to this file which you just extracted.
7) This takes some time, once done you should see a message like "Checking MD5 finished successfully", "Leave CS".
8) You can leave Auto reboot and F-reset time checked.
9) Now click Start and let the process finish.
10) If everything goes fine you should see a green message "Pass"
Let me know how it goes.
Click to expand...
Click to collapse
I am uncertain of which version the phone was on. If you need I can call t-mobile and have them tell me which version it was on.
I did these steps. the file took a hour to download. and It still didn't work. I follow all steps down to the exact. and when I pressed start. within one second it said FAIL. just the other attempts I made.
BramaKnox said:
I am uncertain of which version the phone was on. If you need I can call t-mobile and have them tell me which version it was on.
I did these steps. the file took a hour to download. and It still didn't work. I follow all steps down to the exact. and when I pressed start. within one second it said FAIL. just the other attempts I made.
Click to expand...
Click to collapse
Unless your t889 Note II was sitting in a drawer and not being updated for the last year or so you probably have 4.3
When you go to download mode do you see "custom binary download: yes ..."
and do you see "knox warranty void:" ?
if so, your phone has been rooted.
but unlike your case, when I try to install stock rom through Odin, it goes through the motions of installing and gives message pass - that is that the stock rom has been installed, but unfortunately it has not installed any rom that my phone can read.
koyanishi said:
Unless your t889 Note II was sitting in a drawer and not being updated for the last year or so you probably have 4.3
When you go to download mode do you see "custom binary download: yes ..."
and do you see "knox warranty void:" ?
if so, your phone has been rooted.
but unlike your case, when I try to install stock rom through Odin, it goes through the motions of installing and gives message pass - that is that the stock rom has been installed, but unfortunately it has not installed any rom that my phone can read.
Click to expand...
Click to collapse
No it says
Product Name: SGH-T889
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Official
Knox Warranty Void: 0
RP SWAEV: A2
BramaKnox said:
No it says
Product Name: SGH-T889
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Official
Knox Warranty Void: 0
RP SWAEV: A2
Click to expand...
Click to collapse
Then you have an un rooted 4.3 rom because the 4.1.2 did not have knox
koyanishi said:
Then you have an un rooted 4.3 rom because the 4.1.2 did not have knox
Click to expand...
Click to collapse
Okay thank you, well then link ciphercodes gave me for the firmware was the right one. But still Failed. *Sigh*
BramaKnox said:
Okay thank you, well then link ciphercodes gave me for the firmware was the right one. But still Failed. *Sigh*
Click to expand...
Click to collapse
Since your phone is not rooted then I think that ciphercodes advice will not work as you can only install a stock rom that way only if your phone is first rooted.
Probably you should try to root your phone using instructions from this thread
http://forum.xda-developers.com/showthread.php?t=2562994
But this might not work for you as it could be that efs file is corrupted or something else as we both boot up to a black screen that only has Samsung logo
koyanishi said:
Since your phone is not rooted then I think that ciphercodes advice will not work as you can only install a stock rom that way only if your phone is first rooted.
Probably you should try to root your phone using instructions from this thread
http://forum.xda-developers.com/showthread.php?t=2562994
But this might not work for you as it could be that efs file is corrupted or something else as we both boot up to a black screen that only has Samsung logo
Click to expand...
Click to collapse
Yeah the chainfire root fail as well. I have tried every file for all the Galaxy II's including mines. none work. Always FAIL in Odin. I'm guessing there is just nothing I can do
BramaKnox said:
Yeah the chainfire root fail as well. I have tried every file for all the Galaxy II's including mines. none work. Always FAIL in Odin. I'm guessing there is just nothing I can do
Click to expand...
Click to collapse
Since your phone is not rooted you may be able to get it repaired under warranty. I think that Samsung warranty is only good for a year, but if you purchased your phone with a American Express gold card (I think other gold cards will also apply) your warranty is extended to double what the original was. So perhaps you have a chance to have your credit card pay for the repair.
Otherwise:
I am no expert but if you want to continue playing with your phone before you get expert advice you may want to play with the recovery mode. To enter recovery mode press volume up and home and power buttons at the same time. once you feel vibrate or after a while release the power button but continue to hold volume up and home buttons and then you will enter recovery mode. you may want to go to menu that says wipe data/factory reset and see if that works. It may be that it is like my phone and the system cannot be mounted in which case you will get that message. After you are through to get out of this menu remove the battery.
But please be aware that I am no expert and you are using this info at your own risk
but I think of doing something catastrophic using this advice in my non expert opinion is small.
koyanishi said:
Since your phone is not rooted you may be able to get it repaired under warranty. I think that Samsung warranty is only good for a year, but if you purchased your phone with a American Express gold card (I think other gold cards will also apply) your warranty is extended to double what the original was. So perhaps you have a chance to have your credit card pay for the repair.
Otherwise:
I am no expert but if you want to continue playing with your phone before you get expert advice you may want to play with the recovery mode. To enter recovery mode press volume up and home and power buttons at the same time. once you feel vibrate or after a while release the power button but continue to hold volume up and home buttons and then you will enter recovery mode. you may want to go to menu that says wipe data/factory reset and see if that works. It may be that it is like my phone and the system cannot be mounted in which case you will get that message. After you are through to get out of this menu remove the battery.
But please be aware that I am no expert and you are using this info at your own risk
but I think of doing something catastrophic using this advice in my non expert opinion is small.
Click to expand...
Click to collapse
Yeah the warranty is expired. and I have tried recovery mode. thats actually the first step before trying to apply a firmware. So recovery hasnt worked either. Guess I will just have to get a new phone. thank you all for oyu help tho. I apperciate it
I was just reading through the thread.. It doesnt seem like you tried flashing Tmobiles Stock 4.3 Firmware in download mode. If you tried to flash a 4.1.2 Firmware when the phone was already updated then I think thats where it failed. Try again but with the 4.3 Firmware through ODIN. After it finishes try rebooting it manually and/or if it doesnt boot again then go back into recovery and factory/data reset again...shouldnt hurt to try..
Double0EK said:
I was just reading through the thread.. It doesnt seem like you tried flashing Tmobiles Stock 4.3 Firmware in download mode. If you tried to flash a 4.1.2 Firmware when the phone was already updated then I think thats where it failed. Try again but with the 4.3 Firmware through ODIN. After it finishes try rebooting it manually and/or if it doesnt boot again then go back into recovery and factory/data reset again...shouldnt hurt to try..
Click to expand...
Click to collapse
From my knowledge the other person who first replied gave me 4.3 firmeware fild link. But in the chances of it could u provide me with a link to a 4.3 firmware u believe will work, because all the ones I found have not worked