Hi. So I was rooting my Note2 using the video from the tethering post. I used Odin and ran the openrecovery-twrp-2.3.1.1. It gave me the green Pass message. But when I boot into recovery, I don't get the nice interface, I get the Android System Recovery <3e> screen with text only options. With this I can apply CWM-SuperSU but it gives me an error, but says it installs fine. But when I run SuperSU, it errors out because there are no binaries installed. I even redid the Odin and use the 2.3.1.4 version of twrp, but same exact thing. I even tried flashing twrp from the Recovery but still the same.
Anyone have any advice or tips? I'm sure I'm just missing one step or something. THANKS!
Related
Yikes! I have SGS3 Sgh-T999 model, rooted with TWRP and clockwork mod. Running a JB Liquid Smooth ROM at 4.2.2. I was updating to get the 4.4.2 OS. I backed everything up thoroughly then proceeded to enter TWRP recovery mode. I factory reset (succeeded), wiped cache (succeeded)m wiped Dalvik (succeeded). I then flashed the exact ROM and gapps for my device (cm-11-20140105-NIGHTLY-d2tmo.zip and gapps-kk-20131119.zip) with both attempts failing. I tried to reboot and a message came up saying TWRP needed to repair my super user permissions or soething like that. I opted 'yes" and thus began the endless loop that goes like this: vibrate-SGS3 splash screen with the white letters-TWRP splash screen-black screen-2 vibrates-SGS3 splash and so on.
I cannot enter recovery mode. I can get into download mode only if I am hooked up to the computer with Odin open and phone off. Then I can step into download mode. I cannot however get anything helpful to occur after that. I have tried flashing the stock ROM file using Odin. That is all I know to do at this point. Odin does not give any indication it is flashing in the colored boxes on top (green, pass/fail, etc...). When trying to flash it checks MD5 successfully then gives a "Leave CS" message followed by a "All Threads Completed (succeed 0/failed 0)" message
I am totally stuck. I think my original mistake was not updating TWRP and Clockwork to the freshest version prior to flashing. My second was trying to flash gapps after ROM failed. Then rebooting after both failed. I need help desperately as I am heavy looking for a job and that is my connection to the world.
Does anyone have any sage advice or tutorials on how to get things running again? Thanks in advance for your help!
Ok, this is my first post so forgive if this is in the wrong section...
I have a friend's Galaxy Note 2 ATT that was stuck on the Galaxy Note 2 Boot screen, and it wouldn't go any further.
Because I work for Samsung at the Samsung Experience Shop, I tried running it through our smart reflash tool
-----> This didn't work because it would fully download it onto the phone, but when it got to the Android with the thing spinning in its chest, it would stop and ALWAYS freeze halfway.
Next step I tried doing was going through Samsung Kies and downloading the stock OS and load that, but the same Android with the spinning thing in its chest would show up and it would freeze.
Due to this guy being my friend I told him I would try anything to get his phone to work again (root, to custom recovery, to custom rom)
My steps so far:
1. I have successfully rooted my device via ODIN 1.85 by using CF-Auto-Root
2. Afterwards, I loaded on a custom recovery via ODIN 1.85 which now is philz_touch_6.07.9
Here is my problem now, I've tried searching everywhere and I can't really find the answer...
Whenever I try to side load a rom through ADB through Android tools (its in the right directory and everything because it transfers over), I keep getting an error message "E: Error in /tmp/update.zip (status 7) Installation Aborted."
Now before I get that error I get stuff like getprop("ro.product.device")==t0lte" ||getprop("ro.build.product").... etc. and it goes on and on.
So far the ROMs that I have tried were Cyanogenmod 10.1 and the Pacman Rom, and yes, both are for the correct device like the model name/number match up. And now how I said I thought I rooted the device, whenever I try to reboot into recovery via Philztouch, it says at the top Root Access is missing. Root device, and I click yes. When it reboots into recovery and I want to turn the phone off again, it still says Root Access is missing.
I am open for anything really. My friend just wants his phone to work again. and I've literally exhausted all of my ideas as I keep running into the same issue.
What am I doing wrong? and is something like this possible to fix? Or is my friend SOL?
Thanks for all the help. It's much appreciated.
Your recovery is outdated. Status 7 error.
I use TWRP from the original development section.
rangercaptain said:
Your recovery is outdated. Status 7 error.
I use TWRP from the original development section.
Click to expand...
Click to collapse
+1 to this^^^^^
Look here»»» http://forum.xda-developers.com/showthread.php?t=1981198
And why not give him something stock instead of a CM Rom??[emoji37]
Plenty of stock 4.3 Rom's in the development section...
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Good advice ^^^^ for your friend.
Ok, thanks for the direct response. I've downloaded the latest TWRP recovery and when I try to push it through ODIN, I still have PhilZ Touch 6..? Sorry, I feel like I'm skipping something simple...
according to a guide, I have to make sure when I'm pushing a custom recovery through ODIN I have to leave Auto Reboot and F. Reset Time UNCHECKED. I made sure they were, and for some reason after it says PASS and thread successful 1 failed 0. When I disconnect the phone and turn it back on into recovery mode, I still has PhilZ Touch...
Use your recovery to flash TWRP. There's a zip version and an odin version.
Ok, I got stock recovery on there just by redoing the CF-Auto Root package through ODIN.
I figured well I can apply the ROM the adb through the stock recovery...
It was going well until I got this error. The last line before the error stated:
"Veryfying update package..."
Error:
E: failed to verify whole-file signature
E: signature verification failed
is that due to the fact that i'm using stock recovery?
In the mean time since that didn't work I'm going to flash TWRP and hopefully that fixes the issue.
I'm kinda just documenting my steps here in case anyone wants to follow and chime in if i'm doing something wrong.
Thanks for the help guys!
************3AM EDIT*****************
Ok so I managed to get TWRP 2.7 on the device as I needed the ability to adb sideload the update.zip to the phone since I can't boot into the phone's OS whatsoever.
This is the error I'm receiving now:
Checking for MD5 file...
Skipping Md5 check: no MD5 file found.
then it restarts and I'm stuck at the Samsung GALAXY Note II screen... what's my next step..? Find a different ROM?
**********Another Edit**************
It has just come to me, I shouldn't have to adb sideload the update.zip or the custom rom... even though I can't get into the phones OS and can't copy and paste to the root of the device. Can't I just copy and paste it to a micro SD card and mount that, and then apply the update from there? And as far as those errors I had earlier, I'm still not sure why I received them...
Again, thanks for all the help
Adb won't work if USB debugging wasn't enabled.
In TWRP you can disable md5 checking.
And you don't unzip the zip file.
Thanks for the reply. ADB didn't work because, in fact, since I haven't been able to turn the phone on, I know USB debugging isn't turned on.
And as far as having the MD5 check, it is unchecked.
I received a success message. However, when I try to boot the phone it still gets stuck at the Samsung Galaxy Note II screen.
******Edit******
Ok ended up using a different ROM, I think PacMan rom? It seemed to work until it got to extracting system files and then the phone sits for a couple minutes, screen turns black. And when I try to wake the screen, only the back and menu buttons come up...
Another thing, even though I've already rooted my device using CF-Auto-Root, When I reboot my device with TWRP I go to reboot and then recovery. Then it warns me saying no OS bla bla bla, and then it says it notices that my phone isn't rooted? And that SuperSU isn't on the device. It asks to install it by swiping. I swipe it starts to install, phone reboots. When I reboot it again, it still tells me that the phone isn't rooted. And with the phone not being rooted, I'm coming to the conclusion why I'm having trouble trying to flash Roms.. Is this a possibility?
Why are you using ADB? just drop the .zip for the ROM you wish to flash onto a micro SD card, and flash from within the TWRP. Don't try to extract the .zip whatsoever.
Please don't refer me to any more threads or forums........
I'm sure this has been done and done and talked about but I've been reading the **** out of forums and comments for a few hours now and trying to unroot my Sprint LG G2.
I had it running stock like a champ. rooted it. worked great. then I was attempting to flash lollipop and it required a recovery update (No Problem) I downloaded the correct files and bam! it says your phone is not rooted this requires a root (or something like that) I was already rooted SuperSU installed and root checker said I was fine. so what the hell I swipe to root while inside recovery and it goes to some black screen with tiny text saying fastboot: processing commands and won't leave the screen. I tried booting into recovery and same thing happens. Tried to reboot normal and I'm stuck on the LG logo with my led flashing between blue and green slowly. I CAN boot into download mode and I'm following this
http://pastebin.com/WTm1xFXz
and this
http://forum.xda-developers.com/showthread.php?t=2687929
to unbrick but having this error "Failed PreviousLoad()
Did I not get the right .dll file? I doubt it cause I only saw one...or is it the wrong .tot file? there was 3 or so
http://downloads.codefi.re/autoprime/LG/LG_G2/LS980/Stock_Firmware
Please help!
When i'm in download mode the phone does say I am rooted. is there a way to just re-flash recovery and restore from my backups I did before all this? if I have to wipe this thing clean and start over I don't really mind I just need to get my phone back haha this is the first time this has ever happened to me and I consider myself tech savvy so idk what I did here (except re rooting in recovery like an idiot) thanks so much!
First question, is the download mode you see with a small status bar or the big one?
If you have the big one, download mode should work. The f flash software will verify the tot file. If that goes through you should be golden.
When it asked you in TWRP to root, that is a message telling you system or ROM file did not take.
If you want cm12, use zv8 tot. Root, auto-rec, update TWRP with blastgator bumped TWRP 2.5.1. Flash cm ROM or aosp, then gapps. And go
Ok guys I am pretty sure I fubar'd my tablet.
I am stuck in a recovery loop. When I start the tablet it just goes back into recovery. Which if I still had TWRP I think I could still do something, but I flashed cyanogen recovery trying to flash cm13 since I cold not get anything else to work. I cannot boot into download/firmware update screen. The screen just flickers a little and goes dark.
A little background:
Started when tablet forced install of 5.0 update and I was in a recovery loop. I flashed 410 test build, rooted, flashed twrp, installed stock rooted ROM. Everything was fine. Then tablet did it again, this time I just flashed rooted ROM and factory reset. Even took the steps to fix the white lines and storage issues. Was working fine. Got home a few days ago and I was in a recovery loop again. But now I don't have the bootloader screen/download mode/firmware update screen (whatever you want to call it) so last night i tried to download cm13, Gapps and cyanogen recovery with no avail.
I can access adb on my PC while in recovery, but when I try to access ADB shell I get unauthorized something or other. Because I cannot authorize USB debugging, because ROM won't boot. I tried to flash stock rooted ROM from cyanogen recovery and it says not signed or something like that.
Does anyone have any ideas? I really think I have screwed the pooch here.
sent from a device using an app
title
if you have a stock recovery image flashing it is easy, i had a LOT of troubles with my v410 and still am working with it. i have mine rooted, just with TWRP though, i cant use xposed framework, which negates why i rooted this in the first place. anyway, through much grit and determination flash your stock image after wiping what needs to be wiped and doing all other necessary things. Then, you must download kingo root, supersu, superuser. flashify would help with the flashing i hear, but it has troubles with the v410. kingo root was an apk i managed to find buried under a million viruses on the 34th page of google..or something. rooted mine in one click, from stock to reboot to twrp root.. many glitches.
I need help myself, deleted my "Phone" system app, causing me to lose connectivity with my data plan. cant seem to restore it, and flashify nor twrp has been able to flash a custom recovery, or a backup, im at a loss.
Help? We seek the same thing.
Ok but how do I flash the stock recovery image. I can't use fastboot. ADB says I am unauthorized.
sent from a device using an app
Anyone have any other ideas?
I am at a complete loss. I am by no means a developer, but I do know my way around. I really think I have FUBAR'd this one.
Kind of stinks, I give up. Anyone want a bricked v410?
Sent from my Galaxy Tab 2 using Tapatalk
Hey guys,
So I've been trying for days to get a custom Ron installed on N975F.
Right now I'm on completely reflashed stock Rom. With stock recovery et al. No root.
I am able to flash Magisk with Odin. No trouble. And my phone continues as usual without issue.
However, once I install TWRP, no matter where or how I install it, once I restart my phone it will boot past the warnings without issue, then go to the screen that just says "SAMSUNG" and the phone will never actually boot up.
I can still boot into TWRP recovery without issue, but system itself will never boot, it will just sit on the "SAMSUNG" screen forever.
In fact, it seems like as long as TWRP is installed to recovery, my system will never boot with any Rom. It can be fixed by reinstalling stock recovery, or by reflashing stock in it's entirety (which I have now done before I try again).
Has anyone got any ideas why this might be occurring or how I can address it? I saw some threads about 'rollback protection' but it seems like that is for people who are not even able to boot into TWRP, or get stuck on the first "Samsung Note 10+", screen rather than the system booting "SAMSUNG" screen.
KiwiNote+ said:
Hey guys,
So I've been trying for days to get a custom Ron installed on N975F.
Right now I'm on completely reflashed stock Rom. With stock recovery et al. No root.
I am able to flash Magisk with Odin. No trouble. And my phone continues as usual without issue.
However, once I install TWRP, no matter where or how I install it, once I restart my phone it will boot past the warnings without issue, then go to the screen that just says "SAMSUNG" and the phone will never actually boot up.
I can still boot into TWRP recovery without issue, but system itself will never boot, it will just sit on the "SAMSUNG" screen forever.
In fact, it seems like as long as TWRP is installed to recovery, my system will never boot with any Rom. It can be fixed by reinstalling stock recovery, or by reflashing stock in it's entirety (which I have now done before I try again).
Has anyone got any ideas why this might be occurring or how I can address it? I saw some threads about 'rollback protection' but it seems like that is for people who are not even able to boot into TWRP, or get stuck on the first "Samsung Note 10+", screen rather than the system booting "SAMSUNG" screen.
Click to expand...
Click to collapse
i am guessing try ADB commands see this link! https://www.koskila.net/how-to-use-twrp-to-flash-an-android-device-that-refuses-to-boot-to-twrp/
Many N975 users have reported this issue and I have forwarded concerned to ian as well. What I believe is formatting on latest (last few) twrp causing issue.
If you have N975/N976 then, visit xda My rom thread - Download area - you will find a folder "for stock rom & bootlooped device" download instructions and follow it, I have wrote guide with or without flashing my rom
Edit :
here is direct link, you will find all required file
https://www.mediafire.com/#0urfw8g1gx630
This guide is stop solution to root/root with twrp/fix Samsung roll back bootloop everything. And yes you don't needs to patch anything yourself, all files available are ready to use
Hi Dr Ketan,
Thanks for the response.
I actually solved the issue simply by using the version of TWRP and following the install instructions on your basic "How to Root and Install TWRP" for Note 10+ guide.
So I think this is a problem relating to Ian's latest TWRP. TWRP linked from your thread
is working fine (but leads to issue with Camera in GSI/Lineage OS ROMs).
I will have a look at your special guide relating to Samsung logo/rollback stuff and see if it will allow me to install latest TWRP from Ian and bypass these issues! Thank you.
KiwiNote+ said:
Hi Dr Ketan,
Thanks for the response.
I actually solved the issue simply by using the version of TWRP and following the install instructions on your basic "How to Root and Install TWRP" for Note 10+ guide.
So I think this is a problem relating to Ian's latest TWRP. TWRP linked from your thread
is working fine (but leads to issue with Camera in GSI/Lineage OS ROMs).
I will have a look at your special guide relating to Samsung logo/rollback stuff and see if it will allow me to install latest TWRP from Ian and bypass these issues! Thank you.
Click to expand...
Click to collapse
Yes, As I said issue is related to newer TWRP only. If you use old TWRP, camera will not work. My above link guide is for latest base and you can get latest TWRP only (Included package are having latest available TWRP & Kernel)