Okay guys i have the n7105 version of the Note 2 and i need some help. I'm using twrp as recovery and was flashing a new rom. However something went wrong and my phone was stuck in a bootloop. So i wiped the usual stuff(dalvik caches etc) but i accidently wiped my internal sd card which has my rom on it. i also wiped my system. I have download another rom onto my external sd card and tried to flash it but everytime i hit the use external sd card option, twrp will reboot so now theres noway i can restore my phone. Also i tried mounting my internal sd card but my pc wont recognize it. Help will be greatly appreciated. Thanks
coms159 said:
Okay guys i have the n7105 version of the Note 2 and i need some help. I'm using twrp as recovery and was flashing a new rom. However something went wrong and my phone was stuck in a bootloop. So i wiped the usual stuff(dalvik caches etc) but i accidently wiped my internal sd card which has my rom on it. i also wiped my system. I have download another rom onto my external sd card and tried to flash it but everytime i hit the use external sd card option, twrp will reboot so now theres noway i can restore my phone. Also i tried mounting my internal sd card but my pc wont recognize it. Help will be greatly appreciated. Thanks
Click to expand...
Click to collapse
Try flashing the stock recover/firmwares through Odin or RomToolKit. I'm hoping you didn't somehow mess up the partition on the internal.
[email protected] said:
Try flashing the stock recover/firmwares through Odin or RomToolKit. I'm hoping you didn't somehow mess up the partition on the internal.
Click to expand...
Click to collapse
okay thank you will try it now and report back.
Need help too
I have a very similar issue right now and am able to still access download/recovery mode. I attempted to use the TOOLKIT V3.0.0 for att to restore back to stock. But the problem is it says "waiting for usb debugging to be enabled" which obviously isnt going to happen since it cant boot. Is this still the case with trying to flash back to stock in Odin manually? Please help. I spent practically every penny on this new phone and havent even had it a week...
Set up odin on your computer...go to sammobile.com dl your fw for your phone..extract it to a .tar. .open odin. Press pda put the. File in yhat slot. Make sure only auto reboot and f reset are cheakd...make sure phone is in dl mode flash away
Sent from my SAMSUNG-SGH-I747 using xda premium
coms159 said:
Okay guys i have the n7105 version of the Note 2 and i need some help. I'm using twrp as recovery and was flashing a new rom. However something went wrong and my phone was stuck in a bootloop. So i wiped the usual stuff(dalvik caches etc) but i accidently wiped my internal sd card which has my rom on it. i also wiped my system. I have download another rom onto my external sd card and tried to flash it but everytime i hit the use external sd card option, twrp will reboot so now theres noway i can restore my phone. Also i tried mounting my internal sd card but my pc wont recognize it. Help will be greatly appreciated. Thanks
Click to expand...
Click to collapse
You can always use the advance mode in twrp to copy the file over from external to internal and then flash. Also I'd you have the right drivers installed on your pc you can just connect your phone to computer and copy the ROM over to internal sd. If twrp isn't reading the external do a recovery reboot and try again.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Hello all, I recently purchased a new GS4 tmobile variant and have rooted it via Odin. SU shows up in the app section and TWRP installed successfully. My problem is when I attempt to flash a new rom i.e. GE 4.3, I almost immediately get a FAILED message and cant get it installed. I created a backup and have been able to restore so its not been an issue however I really cant figure out where im going wrong. The zip file is on my SD card but no luck... I'm just looking for some direction,
Thanks Andrew
th3h0ff said:
Hello all, I recently purchased a new GS4 tmobile variant and have rooted it via Odin. SU shows up in the app section and TWRP installed successfully. My problem is when I attempt to flash a new rom i.e. GE 4.3, I almost immediately get a FAILED message and cant get it installed. I created a backup and have been able to restore so its not been an issue however I really cant figure out where im going wrong. The zip file is on my SD card but no luck... I'm just looking for some direction,
Thanks Andrew
Click to expand...
Click to collapse
if you installed the rom correctly to the sd card, using twrp, you should be able to do your wipe data factory reset, wipe cash and dalvik, then press install from sd card, choose zip from sd card and install. make sure the rom is on the root of the sd card. when i first started flashing i was having a issue because my device was mounted incorrectly and the rom was not going to the root of my sd card. i started using a card reader that i can mount as a disk drive and send the rom to that. that solved my issues. also i seemed to be having issues with twrp on my device so i started using it and installed clockwork mod touch recovery and things started working then.Also be sure you are trying to install the correct rom for your device variant.i hope this helps some. good luck
realsis said:
if you installed the rom correctly to the sd card, using twrp, you should be able to do your wipe data factory reset, wipe cash and dalvik, then press install from sd card, choose zip from sd card and install. make sure the rom is on the root of the sd card. when i first started flashing i was having a issue because my device was mounted incorrectly and the rom was not going to the root of my sd card. i started using a card reader that i can mount as a disk drive and send the rom to that. that solved my issues. also i seemed to be having issues with twrp on my device so i started using it and installed clockwork mod touch recovery and things started working then.Also be sure you are trying to install the correct rom for your device variant.i hope this helps some. good luck
Click to expand...
Click to collapse
The .zip file is in a folder called ROMS i created on the root of the internal memory. Right now im stuck without anything as my backup seems to have failed now as well. I've flashed many roms before and have never run into this so im stumped! I've tried using both CWM and TWRP but both through a "failed" error. I downloaded both the rom package from the Tmo variant GS4 forum so i think they should be right...
th3h0ff said:
The .zip file is in a folder called ROMS i created on the root of the internal memory. Right now im stuck without anything as my backup seems to have failed now as well. I've flashed many roms before and have never run into this so im stumped! I've tried using both CWM and TWRP but both through a "failed" error. I downloaded both the rom package from the Tmo variant GS4 forum so i think they should be right...
Click to expand...
Click to collapse
I think ive found your issue. You said you placed the roms in a folder, try this, put the rom DIRECTLY on the root of your sd card, NOT in a folder. Give this a try and let me know. I know when flashing with my last device, the rom could not be placed into a folder, it had to be placed directly onto the root of the sd card. So try going back to the computer and mount as disk drive and directly place the rom onto the sd card, then just scroll down to find the rom while in recovery and this SHOULD work. I had a issue mounting as a disk drive so I just used a micro sd card reader and placed my sd card into the card reader, this automatically is recognized as a external disk drive and I'm able to place rom directly to root of sd card this way. When I tried hooking up my device directly to the computer it mounted as a media device and would not allow the rom to be placed correctly on the root. So that's how I got around that. So keeping these issues in mind, try again and place the rom directly to the sd and NOT in a folder and see if your able to successfully flash after that. After I did these things I was able to flash without any problems. Luke I said when I first flashed these were some issues I encountered that was prohibiting me from flashing correctly. Now I don't have any problems flashing. Please let me know if this works out and enables you to successfully flash. Hope this helps
Background:
I thought I would try to install stock 4.3 leak for i747, forgetting that I had i747M! I totally HARD bricked my phone.. not a whimper, except the familiar recognition of a new device type on windows.. but no charging, booting, or even response.
I turned to the 'Unbrick via SD Card' thread from the Sprint S3 forum:
http://forum.xda-developers.com/showthread.php?p=43305728
I managed to find a debrick.img for the i747M. With that in hand, first using the method utilizing Cygwin, I was able to boot into Download Mode. Hurray! I downloaded the Stock 4.1.2 i747M Bell Image, and fully restored the phone using ODIN.
All seemed great until I removed the debrick SD card, and rebooted. Dead again. With the SD card in, I can reboot. I have tried restoring multiple times, writing a new PIT from another i747M, reinstalling the bootloader... nothing. If the SD Card isn'tin the phone, it's bricked. I am happy my phone is up and running, but it's nasty not having my 16 Gig SD card available, and also, I really need to ensure the battery doesn't die! Can anyone suggest what might be going wrong? Shouldn't I simply need to flash the stock image, and be good!?!
Thanks!
Can you get into Download / recovery mode w/o the SD card ?
Did you try the stock image from this thread ? :
http://forum.xda-developers.com/showthread.php?t=2363882
dwolder said:
Background:
I thought I would try to install stock 4.3 leak for i747, forgetting that I had i747M! I totally HARD bricked my phone.. not a whimper, except the familiar recognition of a new device type on windows.. but no charging, booting, or even response.
I turned to the 'Unbrick via SD Card' thread from the Sprint S3 forum:
http://forum.xda-developers.com/showthread.php?p=43305728
I managed to find a debrick.img for the i747M. With that in hand, first using the method utilizing Cygwin, I was able to boot into Download Mode. Hurray! I downloaded the Stock 4.1.2 i747M Bell Image, and fully restored the phone using ODIN.
All seemed great until I removed the debrick SD card, and rebooted. Dead again. With the SD card in, I can reboot. I have tried restoring multiple times, writing a new PIT from another i747M, reinstalling the bootloader... nothing. If the SD Card isn'tin the phone, it's bricked. I am happy my phone is up and running, but it's nasty not having my 16 Gig SD card available, and also, I really need to ensure the battery doesn't die! Can anyone suggest what might be going wrong? Shouldn't I simply need to flash the stock image, and be good!?!
Thanks!
Click to expand...
Click to collapse
the.teejster said:
Can you get into Download / recovery mode w/o the SD card ?
Click to expand...
Click to collapse
Unfortunately, no. Hard Bricked without the SD card
the.teejster said:
Did you try the stock image from this thread ? :
http://forum.xda-developers.com/showthread.php?t=2363882
Click to expand...
Click to collapse
I hadn't tried this one. I used the one from SAMMOBILE. I'll try this one right now.
Thanks!
dwolder said:
Unfortunately, no. Hard Bricked without the SD card
I hadn't tried this one. I used the one from SAMMOBILE. I'll try this one right now.
Thanks!
Click to expand...
Click to collapse
If you want to maintain ROOT access be sure to grab the root.zip and flash AFTER you flash the image and BEFORE you reboot.
As an FYI, the 16Gig Bell image worked great for me.
the.teejster said:
If you want to maintain ROOT access be sure to grab the root.zip and flash AFTER you flash the image and BEFORE you reboot.
As an FYI, the 16Gig Bell image worked great for me.
Click to expand...
Click to collapse
Tried everything.. flashing the recommended version above from internal disk won't work. Flashes of Odin compatible versions complete, and still need the SD card in. I have rooted, installed Clockwork recovery, tried to install the firmware from internal drive... it would fail. Install from ODIN (Samsung Recovery) it succeeds, but won't boot without the SD Card in. (Familar QD Loader). I just don't get it. I might have to go to ADB level, and see if I can have any success there?
dwolder said:
Tried everything.. flashing the recommended version above from internal disk won't work. Flashes of Odin compatible versions complete, and still need the SD card in. I have rooted, installed Clockwork recovery, tried to install the firmware from internal drive... it would fail. Install from ODIN (Samsung Recovery) it succeeds, but won't boot without the SD Card in. (Familar QD Loader). I just don't get it. I might have to go to ADB level, and see if I can have any success there?
Click to expand...
Click to collapse
You my friend as you said are HardBricked, need to be flashed by jtag. I tried on a friends to use a debrick image to fix, but in the end I have to use the riff box to fix it. You may also have luck with this http://forum.xda-developers.com/showthread.php?t=2439367 but remember to replace the file/files with the proper ones for YOUR phone.
Good Luck
dwolder said:
Background:
I thought I would try to install stock 4.3 leak for i747, forgetting that I had i747M! I totally HARD bricked my phone.. not a whimper, except the familiar recognition of a new device type on windows.. but no charging, booting, or even response.
I turned to the 'Unbrick via SD Card' thread from the Sprint S3 forum:
http://forum.xda-developers.com/showthread.php?p=43305728
I managed to find a debrick.img for the i747M. With that in hand, first using the method utilizing Cygwin, I was able to boot into Download Mode. Hurray! I downloaded the Stock 4.1.2 i747M Bell Image, and fully restored the phone using ODIN.
All seemed great until I removed the debrick SD card, and rebooted. Dead again. With the SD card in, I can reboot. I have tried restoring multiple times, writing a new PIT from another i747M, reinstalling the bootloader... nothing. If the SD Card isn'tin the phone, it's bricked. I am happy my phone is up and running, but it's nasty not having my 16 Gig SD card available, and also, I really need to ensure the battery doesn't die! Can anyone suggest what might be going wrong? Shouldn't I simply need to flash the stock image, and be good!?!
Thanks!
Click to expand...
Click to collapse
I had the exact same issue, took all the same steps you did, and had all the same frustrations. The last thing I tried though was to dd the debrick img to the internal memory of the phone via a terminal session running from my sdcard booted phone. figured I had nothing left to lose. It worked. I got the phone booted to download mode without the card in and restored my phone. I will add that I am no expert so this might be the worst idea ever. but my phone has been running since the 31st.
Bradkirk said:
I had the exact same issue, took all the same steps you did, and had all the same frustrations. The last thing I tried though was to dd the debrick img to the internal memory of the phone via a terminal session running from my sdcard booted phone. figured I had nothing left to lose. It worked. I got the phone booted to download mode without the card in and restored my phone. I will add that I am no expert so this might be the worst idea ever. but my phone has been running since the 31st.
Click to expand...
Click to collapse
How did you make the connection to the phone memory.. ADB? I brought mine to the shop. They said two groups tried to fix it and couldn't. I am going to keep trying (glutton for punishment).
dwolder said:
How did you make the connection to the phone memory.. ADB? I brought mine to the shop. They said two groups tried to fix it and couldn't. I am going to keep trying (glutton for punishment).
Click to expand...
Click to collapse
forgive me, I'm no expert but I'll try to list what I did.
booted the phone via SD card and restored a backup so that I was running a rooted custom 4.3 ROM. I also had the terminal emulator program installed on the phone. so everything worked great at this point except I needed the SD card in the phone to boot.
the image I used for the SD card boot is a 16GB (version not file size) Bell I747M dump of a stock phone, called debrick.img. Sorry I cant remember where I got it but it was here on XDA. To get it on the SD card to begin with I used the terminal emulator on my old i9000(m) and the dd command.
So, to reverse the process I opened the terminal emulator on my SD booted, running I747M. typed: su <enter> to give the app superuser access (allowed root access when prompted) then changed to the directory on the sd card containing the debrick.img file just to save me typing the full path in the command. the internal SD of my phone is found at /dev/block/mmcblk0 as opposed to mmcblk1 for the external SD.
so , moment of truth. I used; dd if=debrick.img of=/dev/block/mmcblk0 <enter> This was the part I mentioned could be the worst idea ever because from what I think I understand, you are writing directly to the boot partition of the SD and could completely screw up all the partitions and whatnot.
after that, crossed my fingers and turned the phone off, pulled the SD card out and luckily booted right up into download mode. Used Odin to get back up and running. Hope that helps or at least doesnt make anything worse for you.
help me please
hey friend, you could climb the debricked.img of i747m to a download server or give me the link where obtubiste, I'm going through a hard brick on the terminal for the same reasons as you, please appreciate what you really so
aisakblack said:
hey friend, you could climb the debricked.img of i747m to a download server or give me the link where obtubiste, I'm going through a hard brick on the terminal for the same reasons as you, please appreciate what you really so
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2345860&page=18 2nd post down has the link I used. Reading the whole thread would be a good idea.
It worked for me
Bradkirk said:
forgive me, I'm no expert but I'll try to list what I did.
booted the phone via SD card and restored a backup so that I was running a rooted custom 4.3 ROM. I also had the terminal emulator program installed on the phone. so everything worked great at this point except I needed the SD card in the phone to boot.
the image I used for the SD card boot is a 16GB (version not file size) Bell I747M dump of a stock phone, called debrick.img. Sorry I cant remember where I got it but it was here on XDA. To get it on the SD card to begin with I used the terminal emulator on my old i9000(m) and the dd command.
So, to reverse the process I opened the terminal emulator on my SD booted, running I747M. typed: su <enter> to give the app superuser access (allowed root access when prompted) then changed to the directory on the sd card containing the debrick.img file just to save me typing the full path in the command. the internal SD of my phone is found at /dev/block/mmcblk0 as opposed to mmcblk1 for the external SD.
so , moment of truth. I used; dd if=debrick.img of=/dev/block/mmcblk0 <enter> This was the part I mentioned could be the worst idea ever because from what I think I understand, you are writing directly to the boot partition of the SD and could completely screw up all the partitions and whatnot.
after that, crossed my fingers and turned the phone off, pulled the SD card out and luckily booted right up into download mode. Used Odin to get back up and running. Hope that helps or at least doesnt make anything worse for you.
Click to expand...
Click to collapse
Your method worked for me. Very clever and thank you. I did have to do some modifications of the partitions to fit the 145MB debrick.img file. I also had to mount it as a 2nd partition from the sdcard. Once, was in dowload mode without original debrick sdcard, I flashed the clockworkmod recovery then restored one of my previous back thus retaining root.
Mind sharing the i747m Debrick.img?
Seems like the link from the post you linkd us to is not working, clicking download does nothing :/ currently have a bricked Bell S3 and need a debrick.img
Bradkirk said:
http://forum.xda-developers.com/showthread.php?t=2345860&page=18 2nd post down has the link I used. Reading the whole thread would be a good idea.
Click to expand...
Click to collapse
Same for me, I really need that link to be working:good:
My phone is in recovery but I cannot flash any roms because I have none in internal memory and for some reason it refuses to read anything on my sd card. I was able to recover a rom I had backed up before but as it had booted up, it shut down on its own and now it just goes back to recovery. No matter what I do, it just reboots into recovery. I tried connecting my phone to the pc using the USB cable but it will not let me copy anything into the internal memory. It wont even show me my sd card anymore. I have tried mounting it but nothing works. Any idea what it can be? Any help would be highly appreciated. I am on TWRP 2.8.0.0.
Have you tried using adb sideload to push a new rom zip onto internal storage?
http://teamw.in/ADBSideload
Mostly adbsideload will work.
Worked with me before on xperia tx. And i think it work with any device!!