Hello everyone ,
I am a new member of xda , I greet all as one thing, you're number 1 : D
I have a problem with my N7100 Italian .
I recently updated the official rom via ota 4.3 but since the poor performance I decided to flash it with a new rom .
As a beginner I have read a bit of documentation and I realized that before messing around : D you need to install a recovery other than the official , also to be able to flash the new rom without using odin ( already here if I'm wrong let me know : | )
How to build version I JSS15J.N7100XXUEMK9 with Android 4.3
The problem is that , despite trying different recovery through odin the result is the same, odin says that the upload is correct and is successful in practice but when I enter again in recovery mode I always get the recovery standard( version 3e) loaded on board ....
where am I doing wrong ? To read all the posts seems like a no-brainer, just to me does not work? - . -
Thanks for everything in advance, definitely give me some tips about !
: D
You have installed the official rom with Knox feature.
It's impossible to downgrade.
Read this: http://forum.xda-developers.com/showthread.php?t=2531363
Related
Hello guys.
I am a brand new Android user and a total noob when it comes to the whole terminology here (ROMs,Kernel,flash etc). I've been reading a lot and i got better i must say,but i still need to ask some questions and get some instructions.
I have a Samsung Galaxy ACE II - GTI 8160
The phone is rooted,i have SuperSU and this is the info bout the phone.
Firmware : I8180XXMF1
Kernel : 3.0.31D-K_v1.RC15
Android Version : 4.1.2. (official)
I'd like to flash a new ROM,and more specifically the 10.1 CM.
My questions are. Does the current firmware and Kernel version that my phone has,meet the requirements to flash the new ROM right away?
Even if they do,shall i "upgrade" Kernel to something better to increase performance (since i dont think i can upgrade firmware,couldnt find a newer Greek version).
New ROM will support Greek language normally?
Is there anything else i should notice before starting the procedure?
I'd appreciate some specific step to step instuctions of what should i do before flashing,if ofcourse there is something i should do.
Thank u in advance and sorry if there is a similar topic and i missed it
Sbbath said:
Hello guys.
I am a brand new Android user and a total noob when it comes to the whole terminology here (ROMs,Kernel,flash etc). I've been reading a lot and i got better i must say,but i still need to ask some questions and get some instructions.
I have a Samsung Galaxy ACE II - GTI 8160
The phone is rooted,i have SuperSU and this is the info bout the phone.
Firmware : I8180XXMF1
Kernel : 3.0.31D-K_v1.RC15
Android Version : 4.1.2. (official)
I'd like to flash a new ROM,and more specifically the 10.1 CM.
My questions are. Does the current firmware and Kernel version that my phone has,meet the requirements to flash the new ROM right away?
Even if they do,shall i "upgrade" Kernel to something better to increase performance (since i dont think i can upgrade firmware,couldnt find a newer Greek version).
New ROM will support Greek language normally?
Is there anything else i should notice before starting the procedure?
I'd appreciate some specific step to step instuctions of what should i do before flashing,if ofcourse there is something i should do.
Thank u in advance and sorry if there is a similar topic and i missed it
Click to expand...
Click to collapse
Download Rom (Team Canjica 10.1)
Download Temporal CWM Recovery ( Or if you have already don't download)
Download Gapps
Reboot into Recovery (vol up + home + power)
Mount and Storage > Format System
Wipe data / cache / dalvik cache
Flash ROM (install zip
Flash Gapps
Reboot system
Noob
You're not the only one
Don't have any fear about putting on a custom ROM, just follow the instructions carefully and double check you've downloaded the right gapps file. I've done it a fair few times now, and any problems I've had have been sorted by reading this forum.
Thanx a lot for ur responses guys. I'll try to read more before i do it,just to be absolutely sure about my moves.
Sbbath said:
Thanx a lot for ur responses guys. I'll try to read more before i do it,just to be absolutely sure about my moves.
Click to expand...
Click to collapse
-CMIIW your firmware should have greek
-can ask in Q n A
Sent from my GT-I8160
This is a full tutorial for Wiko Rainbow,BLU Studio 5.0 C HD,Explay Fresh ,QMobile i9 ,MicromaxA120 C2C,MyPhone Agua Rio, with rooting, custom recovery and custom rom STEP BY STEP installation.
IF YOU HAVE BLU Studio 5.0 C HD,Explay Fresh ,QMobile i9 ,MicromaxA120 C2C, MyPhone Agua Rio, BACKUP YOUR IMEI
DOWNLOAD:MTK DROID TOOLS
STEP 1 FOR Wiko Rainbow,BLU Studio 5.0 C HD,Explay Fresh ,QMobile i9 ,MicromaxA120 C2C, MyPhone Agua Rio
1-WIKO KITKAT V13 download it here:v13 appears v8 as i said..this is v13 wiko rainbow firmware uploaded by me from OFFICIAL rom..so even it says v8 you know that this is the correct version..flash it with SP FLASHTOOLS:https://www.androidfilehost.com/?fid=23991606952609461
2-extract folder and run SP FLASH TOOLS
3-when rom boots, root the rom and install custom recovery.
4-root HERE:https://www.androidfilehost.com/?fid=23991606952609407
5-extract with winrar and install root as normal apk.
6-install custom recovery :] with flashify or SP FLASHTOOLS like in my video tutorial.
PHILZ RECOVERY KITKAT:https://www.androidfilehost.com/?fid=23991606952592789
TWRP 2.8.2 KITKAT:https://www.androidfilehost.com/?fid=95916177934552002
SP FLASHTOOLS HERE
ADB DRIVERS
step 1 only needed for first time installing a custom kitkat rom for WIKO BASE kitkat
STEP 2-for all custom roms KITKAT after having root and custom recovery
A)enter recovery and backup the stock rom
B) wipe data/factory reset
C) wipe cache and dalvik cache
D)install zip from sd card -your custom rom
CUSTOM ROMS FOR WIKO BASE AVAILABLE:https://www.youtube.com/playlist?list=PLVddAFJHtD21TsCvr7uthGJmpkeQ9G_I0
CUSTOM KERNEL by @moonrotation HERE:http://forum.xda-developers.com/android/general/kernel-wr-kernel-wiko-rainbow-clones-t3003920
if you have MMX 120 C2C FOTA ,stock kk or MYPHONEAGUARIO, EXPLAY FRESH, QMOBILE i9 and want to install a custom rom KITKAT for wiko base firmware see this small video:
in the description you have all download links you need and all on video tutorials very easy to understand.
HOW TO INSTALL CUSTOM RECOVERY:
PHILZ RECOVERY KITKAT:http://d-h.st/2gu3
TWRP 2.8.2 KITKAT:http://smokermanxda.blogspot.pt/2015/04/twrp-282-with-otg-support.html
CARLIV KK :http://d-h.st/Wl6i
new TWRP released..
downloads:download here!
Wiko Rainbow,BLU Studio 5.0 C HD,Explay Fresh ,QMobile i9 ,MicromaxA120 C2C,MyPhone Agua Rio
ALL CUSTOM ROMS HERE:
http://forum.xda-developers.com/t/micromax-a120
Hey nice work buddy
Hey bro,
Good work :highfive:
Much more organised now.
yes..its a bit annoying having all splitted..i have to bookmark threads cause i cant find it one by one..i will add all custom roms here for our phones.
smokerman said:
yes..its a bit annoying having all splitted..i have to bookmark threads cause i cant find it one by one..i will add all custom roms here for our phones.
Click to expand...
Click to collapse
Yeah! v should have a proper thread where v can find most of the tutors and almost all roms so no need to keep on searching..
CUSTOM KITKAT ROMS FOR WIKO BASE KITKAT:
original thread here by me:http://forum.xda-developers.com/android/development/rom-slimpop-t3077197
original thread here by @umangleekha :http://forum.xda-developers.com/android/development/rom-canvas-2-colours-t2863614
original thread here, this rom you can put CM11 THEMES by @mr-illusionist :http://forum.xda-developers.com/android/development/mt6582-ansp-v4-rom-t3056928
original thread here by @vibhu0009 :http://forum.xda-developers.com/android/development/vionicl-t3017145
all new roms and video rreviews HD:
http://smokermanxda.blogspot.pt/
https://www.youtube.com/user/blueangelman13
#edited.
updated.:good:
I need your help...
Hey there!
jd1639 gave me the advice to post my problem in this thread rather than wait for an answer in the xda-assist thread. For not having to write it all again, here is a link to the post I made: http://forum.xda-developers.com/general/xda-assist/unbrick-wiko-rainbow-t3108133 . Seems like noone is able to help me on that issue, but I hope for your knowledge to come up with a solution...
Is it possible to use an update.zip to fix it? Thought of packing the whole stock-rom into a zip-file, rename and install it, and everything would be fine again. Tried to do so, but when I pick the "apply update from sdcard"-option in recovery menu, the system partition is shown instead of the sd card storage, and I don't know how to put the zip onto sys without adb.
If not even a pro like you knows a solution for this, do you think it is still possible to recognize, that I tried to install a custom firmware? Otherwise I could return it to Wiko and hope for a replacement!
Thank you for arguing with my problem by now, please let me know what you think about it.
Regards,
Metal-Moe
@Metal-Moe so let me try to help you..
you have 2 methods:
1.official tool
what you must do? connect your phone and run JB version (it appears v14 on wiko site)..i assume you know how to it.#see below the pictures and minitutorial.
charge your battery to full, this is important!! see if the software recognize your WIKO..run this drivers:https://www.androidfilehost.com/?fid=95916177934554018 and try to connect and reconnect your WIKO in different USB ports after you installed the drivers. (install anyway if appears a security warning)
2.SPFLASHTOOLS-.if doesnt work try the same method but with SP FLASHTOOLS..even in my computer sometimes doesnt recognize when testing developer roms..and i do that ..works for me..you just need to be patient and keep trying..one of the usb ports will work for sure..after it works flash stock JB and see if your IMEI is back..at least have your phone back to life..to restore your IMEI you have many methods..just PM or mention me to have a more faster answer..first lets see if we can bring back your phone from the dead.:good:
note:stock JB makes a folder inside that is SP FLASHABLE like this:
Members. If you report something, and disagree with the outcome of the report, pm the Moderator to discuss.
Do not come back to thread to start trouble.
Thanks,
Darth
Forum Moderator
removed all dev-host links..reuploaded to androidfilehosting.
Thanks anyway!
@smokerman: Unfortunately I wasn't able to solve the problem with the possible solutions you'd mentioned, so I brought the bricked phone back to the local store, hoping it wouldn't be returned unrepaired due to guarantee loss. Two weeks later I got it back and it's working fine! But thank you for your effort in helping me anyway!
Now I'll backup the IMEI with MobileUncle before doing anything else!
Metal-Moe said:
@smokerman: Unfortunately I wasn't able to solve the problem with the possible solutions you'd mentioned, so I brought the bricked phone back to the local store, hoping it wouldn't be returned unrepaired due to guarantee loss. Two weeks later I got it back and it's working fine! But thank you for your effort in helping me anyway!
Now I'll backup the IMEI with MobileUncle before doing anything else!
Click to expand...
Click to collapse
and from that time i ve posted 2 more solutions for IMEI, easy..http://smokermanxda.blogspot.pt/2015/05/fix-imei-wiko-rainbow-micromax-a120.html
and:http://smokermanxda.blogspot.pt/2015/05/how-to-restore-imei-on-any-mtk65xx.html
Thanks for this great tutorial man....
@smokerman I have successfully flashed wiko base firmware v10 with this tutorial... Thanks again..
There is a ota update available from wiko..system>about>update
If i update..will it further change the firmware to latest version v13...or do i need to flash the whole package of v13 for the latest version...
niyas90 said:
@smokerman I have successfully flashed wiko base firmware v10 with this tutorial... Thanks again..
There is a ota update available from wiko..system>about>update
If i update..will it further change the firmware to latest version v13...or do i need to flash the whole package of v13 for the latest version...
Click to expand...
Click to collapse
if you have root and recovery probably you cant update..it will give you a error..but here it is v13 to flash with SP FLASHTOOLS:
v13 appears v8 as i said..this is v13 wiko rainbow firmware uploaded by me from OFFICIAL rom..so even it says v8 you know that this is the correct version..flash it with SP FLASHTOOLS:https://www.androidfilehost.com/?fid=23991606952609461
[GT-I9192] - S4 Mini Duo - Can we root with any build ?
Hi all,
I'm trying to find a way to root my Galaxy S4 mini DUO. (in order to install an other room after that).
It seems that we need a specific build to root it ... And I can't find any root tutorial with my build ...
(my version 4.4.2 : KOT49H.I9192UBUCOC2)
In this case, can we re-install other "official" build in order to apply tutorials ? like downgrade the phone or whatever ?
I found a tutorial that explain at the end that we need to re-install an other build if our build doesn't match ... (without explain of course how to do it)
My question :
- Can we reinstall an other build on the i9192 easily (with kies or something other..)
- If yes where can we find a precise build for the i9192 needed for those tutorials ?
Something more : in download mode there is written : knox warranty void 0x1 (I don't know if I can downgrade with that warranty void)
Thank you if have solutions !
C.
cthybert said:
Hi all,
I'm trying to find a way to root my Galaxy S4 mini DUO. (in order to install an other room after that).
It seems that we need a specific build to root it ... And I can't find any root tutorial with my build ...
(my version 4.4.2 : KOT49H.I9192UBUCOC2)
In this case, can we re-install other "official" build in order to apply tutorials ? like downgrade the phone or whatever ?
I found a tutorial that explain at the end that we need to re-install an other build if our build doesn't match ... (without explain of course how to do it)
My question :
- Can we reinstall an other build on the i9192 easily (with kies or something other..)
- If yes where can we find a precise build for the i9192 needed for those tutorials ?
Something more : in download mode there is written : knox warranty void 0x1 (I don't know if I can downgrade with that warranty void)
Thank you if have solutions !
C.
Click to expand...
Click to collapse
follow the link to root - http://forum.xda-developers.com/showthread.php?t=2494435
Yes u can reinstall any bulds with odin
visit sammobile to download firmwares flash it with odin
Don't forget to hit the thanks button
Sureshtuty said:
follow the link to root - http://forum.xda-developers.com/showthread.php?t=2494435
Yes u can reinstall any bulds with odin
visit sammobile to download firmwares flash it with odin
Don't forget to hit the thanks button
Click to expand...
Click to collapse
Thanks, youre process works well !
Hi
I use a unlocked version of M8 . I've installed these customs :
Skydragom v10.0 ROM
ElementX KERNEL
TWRP RECOVERY
unfortunately as you know in custom roms the "About" section no longer shows my build number . How find it ? second request where can I find my firmware version ? What's it's general form ? I don't anything about firmware !
last request : How get back to a stock rom ? I want to get OTA !
Do a fastboot command :
Fastboot getvar all
That shows all info of the device. If you post it here then DELETE the SERIAL & IMEI before you do !!!
Cheers
Oh and going back to stock ? Not sure how you could have missed these 2 threads
1 - http://forum.xda-developers.com/showthread.php?t=3086860
2 - http://forum.xda-developers.com/showthread.php?t=2701376
Hy,
i, got a Samsung Galaxy j6+ (SM-J610 FN) that was before automatic updatet to Android 10.
So i want use it for me now and want to root and change to a Twrp recovery and any custom Rom.
-----
I had the last years many devices as Sony, HTC, and older Samsung and nevertime i had so much problems to understand and also start to flash Twrp and any rom... Yust now with this device i starting cracy :-(
-----
So the problem to understand proper/my questions (my english isn,t very well):
1. i read now nearly two day,s a lot of treads ther and on other Forums. And i starting realy confused now becaus it seems al lot of problems with newer Android System (and also Bootloader) to flash and permanently root,...
2. as i read: something on Android 10 dont want work (is broken) after Twrp/root or have other problems,...?
3. If the TWRP is flashed with existing Android 10, only Magisk is then flashed (with TRWP or ODIN) not: RMM_BYPASS_V3_CORSICANU.ZIP and not J4 + J6 + _oreo_forced_encryption_disabler.zip. Is that right?
4. So, also i read things about the existing bootloader Version that must be have to do this? I have now U2.
must i have a higher version? So many things make me realy unsure what i have to care bevor i can flash some rom e.g.
###################
So what I had made before (already):
1. Set the device back to factory setting ...
2. unlocked OEM
Then i wanted flash TWRP (and i also try,d to flash stock-Rom first after it not work,...) but everything dont want work about Odin failed e.g....
3. Did I find that the bootloader State Prenormally stood ---> I have now fixed that with date. That should fit now.
############
What i wont to do:
Preferably downgrade to Android 9 (or 8?), as the device with Android 10 is very slow now. :-(
- Flash TWRP
- Flash Magisk (get root)
- Flash Resurrection Remix (vx.x.x.) for Samsung Galaxy J6+
(????BUT I NOT SURE WHITCH ANDOID VERSION IT IS????)
- (or) Flash lineage-17.1-20200318-UNOFFICIAL-j6primelte
(????BUT THIS IS ANDOID VERSION 10 ALSO IS,NT IT ????)
*If there a good stable Version Rom with Android 9 or 8 so where/which,...?
And if i can flash to downgrade must i then flash the files: RMM_BYPASS_V3_CORSICANU.ZIP and J4 + J6 + _oreo_forced_encryption_disabler.zip? And when then in which way?
After TWRP (before Magisk), or after downgrade already,...?
--------------------
So i have a lot of Questions here, i know, sorry and somewhere it can read part,s of this, but i,m not sure what right for me . :-(
But there many treads now from 2018 til yet and it isn,t easy for me to understand, or better to find the right information's for me in this case (Android 10, downgrade,........ which Rom,....)
I would be very happy if someone can tell me understandable as I have to do exactly and which files are really needed to successfully downgrade with root on Android 9 (or 8?) and maybe even which Rom is recommended. Thanks for the time to have read this here.
Regards, paulhu
As I don't know the version, you can follow this video on YT, I hope it helps you.
Hello @hakli,
many thanks for your response.
Which version do you mean? The Galaxy J6 is: Galaxy SM J610FN / DS.
Thanks for the video, it's certainly very helpful.
What confused me most is with the two files that have to be flashed in a TWRP TREAD stood that it is not needed at Android 10, but there was no feedback from other users and in other places it's about it?
As far as the downgrade is concerned, another thing again ....
Greetings, Paulhu
paulhu said:
Hello @hakli,
many thanks for your response.
Which version do you mean? The Galaxy J6 is: Galaxy SM J610FN / DS.
Thanks for the video, it's certainly very helpful.
What confused me most is with the two files that have to be flashed in a TWRP TREAD stood that it is not needed at Android 10, but there was no feedback from other users and in other places it's about it?
As far as the downgrade is concerned, another thing again ....
Greetings, Paulhu
Click to expand...
Click to collapse
I will honest with you, it is not easy to install twrp on j6+ (any version) watch every vid on YT. but follow the video and install the stock rom, and there will be a file called , you have to follow and use the magisk app to root the phone. Sorry for the late reply. I am kind a busy.
And I don't know where do you live, if you are an American , Italian or Indian. once I know , then I can embed the video that you can follow, First follow the above video and install the stock rom from sam mobile. You can PM me too.