Hello everyone ,
I am a new member of xda , I greet all as one thing, you're number 1 : D
I have a problem with my N7100 Italian .
I recently updated the official rom via ota 4.3 but since the poor performance I decided to flash it with a new rom .
As a beginner I have read a bit of documentation and I realized that before messing around : D you need to install a recovery other than the official , also to be able to flash the new rom without using odin ( already here if I'm wrong let me know : | )
How to build version I JSS15J.N7100XXUEMK9 with Android 4.3
The problem is that , despite trying different recovery through odin the result is the same, odin says that the upload is correct and is successful in practice but when I enter again in recovery mode I always get the recovery standard( version 3e) loaded on board ....
where am I doing wrong ? To read all the posts seems like a no-brainer, just to me does not work? - . -
Thanks for everything in advance, definitely give me some tips about !
: D
You have installed the official rom with Knox feature.
It's impossible to downgrade.
Read this: http://forum.xda-developers.com/showthread.php?t=2531363
[SIZE=+3]Frequently Asked Questions[/SIZE]
[SIZE=+2]GT-I919X[/SIZE]
Here I'll write down a set of Q&A about the S4 mini, flashing, etc.
(If you like to provide extra information or have a correction, I'll add it to the OP)
Disclaimer:
I'm not liable to any demage to your device, including Knox. The information here is as good as I know, there is no guarantee.
- How to enter recovery?
- Power the device off and press volume up + home + power for a while
- How to enter download mode?
- Power the device off and press volume down + home + power for a while
- How to root?
- This is one method, there are many though (this one will trip Knox): http://forum.xda-developers.com/showthread.php?t=2364980
- What is Knox?
- Read here: http://forum.xda-developers.com/showthread.php?p=52855637
- My device is bricked help!
- Follow this thread: http://forum.xda-developers.com/showthread.php?p=52648525
- How to flash something with Odin?
(If not described differently, follow this)
- Make sure you've enough charge on your phone, min 40% is usually safe
- Put the .tar or .tar.md5 file into PDA or AP (it's the same, it's just different in Odin versions)
- Boot your device into download mode (press volume down + home + power at the boot process for around 20 seconds)
- Connect your device (Odin should say "Added")
- Click "start" (Do NOT disconnect your device or power off your computer in the flashing process, it could hardbrick your phone)
- Wait until your phone has fully rebooted
- Done (If you've trouble with booting into the system after a flash, do a factory reset in the recovery)
- More flashing information: http://forum.xda-developers.com/wiki/index.php?title=Flashing_Guide_-_Android
- My signal is bad etc. from the very beginning I have this phone, what can I do?
- Return to seller before Knoxing it up (don't flash anything and don't try to repair it on your own)
- Will the s4 mini forum get more users any day, also more roms etc.?
- Yes, I'm pretty sure, the device got intense price reduction since the S5 was released, so more people could afford it
- I don't like the keyboard of my AOSP rom, is there a better one?
- Look here this is the Xperia Z2 keyboard, it works for s4 mini (Flash the flashable .zip not the single file): http://forum.xda-developers.com/showthread.php?t=2708805
- Can I flash Cyanogenmod with TWRP?
- It worked for me, even though the Cyanogenmod team doesn't recommend it
- When I boot my device I see colored pixels lightning up after the splash screen, is my device now totally broken?
- No, It's stuck in a bootloop, but the lightning pixels are not to worry normally. You've to unbrick it.
- My device is heating up, do I have to worry?
- Mine does too, and I'm not worrieng
- How to enter to enter extra-developer settings (For example performance settings (set governor etc.)) in AOSP roms?
- Tap the build number in the phone information menu 7 times (It should say "now you're a developer") Then after that you'll find more menus in the settings
- How to easily access the hidden service menus?
- Download this: https://play.google.com/store/apps/details?id=com.kabasoft.util.servicemodeshortcut&hl=de (In AOSP rom's probably only the "Test menu" works, because others are blocked)
- How to change CSC?
- Get this app: https://play.google.com/store/apps/details?id=com.manniakk.cscselector&hl=de
- How to safe battery without loosing performance?
- Deactivate syncing services (Parts of Googles services etc.) which you don't need, or pick another governor and i/o.
- My battery doesn't work properly and I've my phone for more than 1 year, what can I do?
- Batteries don't have a long lifespan, your battery is most likely demaged. You can use this app to view what the system says to the battery health: https://play.google.com/store/apps/details?id=com.cpuid.cpu_z&hl=de
- Where to download the latest stock firmwares?
- www.sammobile.com or www.samsung-updates.com (Sammobile is recommended)
- Can I return to stock after flashing a custom rom?
- Yes, but remember you cannot reverse Knox so far! How to reverse to stock: Flash a stock firmware with odin, enter recovery and do a factory reset. (Stock firmware links, above)
Thanks for the design template to XDA
To be continued...
Design updated, thanks to XDA for the template.
there are an idea to root a KK UCNH5 without tripping knox ? because Towelroot don't work at all...
Loulou-13 said:
there are an idea to root a KK UCNH5 without tripping knox ? because Towelroot don't work at all...
Click to expand...
Click to collapse
cf autoroot http://download.chainfire.eu/425/CF...Auto-Root-serranolte-serranoltexx-gti9195.zip
here
Aronuser said:
cf autoroot http://download.chainfire.eu/425/CF...Auto-Root-serranolte-serranoltexx-gti9195.zip
here
Click to expand...
Click to collapse
ha ok !
i didn't remember ...
thank you !
thank you for the information!
I am using carbon ROM and it's great, but i can't remove the second chip icon (i don't use) in the status bar. Does anyone know how to remove it?
Aronuser said:
Design updated, thanks to XDA for the template.
Click to expand...
Click to collapse
Hello, thanks for your advice. Please could you answer this for me. I currently have an s3 mini and love flashing custom roms etc. I am thinking of buying an s4 mini on contract with o2 service provider. If i buy this phone and the bootloader is locked will i be
able to unlock the bootloader?
2010radams said:
Hello, thanks for your advice. Please could you answer this for me. I currently have an s3 mini and love flashing custom roms etc. I am thinking of buying an s4 mini on contract with o2 service provider. If i buy this phone and the bootloader is locked will i be
able to unlock the bootloader?
Click to expand...
Click to collapse
I believe you need a code for that but I'm not really sure I hope someone else knows better maybe search the forum
Yo cree unas versión de twrp para samsung
gt- i9195 en versión de 2.8.1.0 &
2.8.3.0.....pero la versiones 2.8.3.0 tiene
algunas fallos....
somebody can give me dbrick.img i9190 plzzxzz
Help me sir somebody can give brick.IMG i9190 my phone hard brick plzZ help me
almost 1 year my phone was hardbrick
benjieoral said:
Help me sir somebody can give brick.IMG i9190 my phone hard brick plzZ help me
almost 1 year my phone was hardbrick
Click to expand...
Click to collapse
Search online for "repair firmware i9190" I think it was available, I'm not allowed to link it since it's for premium download only. Once you got the file, share it with us. I don't have it.
please tell me what is deference between GT I9190, 9192, 9195.
can i install custom roms of I9192 to 9190 or 9195.
sajid0786 said:
please tell me what is deference between GT I9190, 9192, 9195.
can i install custom roms of I9192 to 9190 or 9195.
Click to expand...
Click to collapse
I9192- dualsim
I9190-3g
I9195-4g
You can not install roms from other device. The system will boot bu you will have no radio function(gsm, mobile data...)
BioGenX said:
I9192- dualsim
I9190-3g
I9195-4g
You can not install roms from other device. The system will boot bu you will have no radio function(gsm, mobile data...)
Click to expand...
Click to collapse
Thanks
and pressed thanks buton
Thank you very helpful info
I am new to android and i have s4 mini i9190 which had stock rom 4.2.2 jelly bean.
four days ago i installed TWRP using odin but was so scared to install custom rom. Anyway i still made a back of everything(modem, EFS, Boot, System, Cache, Preload and Data). Two days ago i installed CM12.1 and i really liked it but the problem is camera. The pic captured while recording video is in low resolution compare to stock camera. so kind of slow too.
Can i go back to jelly bean using the restore without any problem?
and which restore option should i leave checked.
My knox is 0x1.
Can someone please help me go back to stock rom?
A question the system format is required to install the rom ??
Do anyone know when they stopped producing i9195 and i9195i ? I need to buy the latest version, because my i9195 was made in 2013 and have that battery drain issue even with new batteries...
Dik
Hey people,
I have a question, I think I flashed the wrong root package because it shows at booting: i9195.
I have a i9190 because i9190 was showing when I used the phone for the first time, right?
Now I experienced some little problems like whatsapp opens screen with empty chats sometime, camera doesn't work sometime, and a few little things I don't remember but it seems not really stable.
About phone
Model name: GT-i9190
CM-version: 12-20150308-NIGHTLY-serrano3gxx (5.0.2)
Smalband: i9195XXUBNB3
Kernel: 3.4.0-cyanogenmod-g92aec50 build02
Build: cm_serrano3gxx-userdebug 5.0.2 LRX22G f9700d25ee test-keys
Can someone tell what I did wrong exactly, and give a link to de correct root package for the i9190 if I need to reflash it? I Want to use the latest Android 5.1 and prefer the most stable one. Please be clear I don't want to brick it, lol.
Thanks in advance!
Download stock firmware for I9190 and flash it using odin. Wipe data and cache.
It is tedious to setup your phone again from the start but I suggest doing that.
"" Smalband: i9195XXUBNB3
Kernel: 3.4.0-cyanogenmod-g92aec50 build02 ""
You have I9195 baseband on I9190 ?? Not sure what happened there.
Anyway do as I suggest. Hope it helps.
Ok, I will do that first, can someone give me the correct link of the root package for i9190 with CMW included so I can install CM12.1 directly after flashing? Because I get confused by all that topics about rooting.
I will let you know if it worked.
lajostkm said:
Ok, I will do that first, can someone give me the correct link of the root package for i9190 with CMW included so I can install CM12.1 directly after flashing? Because I get confused by all that topics about rooting.
I will let you know if it worked.
Click to expand...
Click to collapse
You must flash a custom recovery first and use that to root or flash other roms like cm12.
http://forum.xda-developers.com/showthread.php?t=2398143
Read that thread. Follow those instructions.
That is official root method for S4 Mini I9190.
hi where do i find the files to root this phone? i found the files for it on hxxps://autoroot.chainfire.eu/ but the build number is different than mine. does my phone haveing a different build number than "KOT49H.I9190UBUCNG1" make a difference? havint rooted anything before any help would be great thanks
If you want a easy root try http://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461 install for android and press root.i rooted my 9195 and its work
Follow the link - http://forum.xda-developers.com/showthread.php?t=2398143
Hy,
i, got a Samsung Galaxy j6+ (SM-J610 FN) that was before automatic updatet to Android 10.
So i want use it for me now and want to root and change to a Twrp recovery and any custom Rom.
-----
I had the last years many devices as Sony, HTC, and older Samsung and nevertime i had so much problems to understand and also start to flash Twrp and any rom... Yust now with this device i starting cracy :-(
-----
So the problem to understand proper/my questions (my english isn,t very well):
1. i read now nearly two day,s a lot of treads ther and on other Forums. And i starting realy confused now becaus it seems al lot of problems with newer Android System (and also Bootloader) to flash and permanently root,...
2. as i read: something on Android 10 dont want work (is broken) after Twrp/root or have other problems,...?
3. If the TWRP is flashed with existing Android 10, only Magisk is then flashed (with TRWP or ODIN) not: RMM_BYPASS_V3_CORSICANU.ZIP and not J4 + J6 + _oreo_forced_encryption_disabler.zip. Is that right?
4. So, also i read things about the existing bootloader Version that must be have to do this? I have now U2.
must i have a higher version? So many things make me realy unsure what i have to care bevor i can flash some rom e.g.
###################
So what I had made before (already):
1. Set the device back to factory setting ...
2. unlocked OEM
Then i wanted flash TWRP (and i also try,d to flash stock-Rom first after it not work,...) but everything dont want work about Odin failed e.g....
3. Did I find that the bootloader State Prenormally stood ---> I have now fixed that with date. That should fit now.
############
What i wont to do:
Preferably downgrade to Android 9 (or 8?), as the device with Android 10 is very slow now. :-(
- Flash TWRP
- Flash Magisk (get root)
- Flash Resurrection Remix (vx.x.x.) for Samsung Galaxy J6+
(????BUT I NOT SURE WHITCH ANDOID VERSION IT IS????)
- (or) Flash lineage-17.1-20200318-UNOFFICIAL-j6primelte
(????BUT THIS IS ANDOID VERSION 10 ALSO IS,NT IT ????)
*If there a good stable Version Rom with Android 9 or 8 so where/which,...?
And if i can flash to downgrade must i then flash the files: RMM_BYPASS_V3_CORSICANU.ZIP and J4 + J6 + _oreo_forced_encryption_disabler.zip? And when then in which way?
After TWRP (before Magisk), or after downgrade already,...?
--------------------
So i have a lot of Questions here, i know, sorry and somewhere it can read part,s of this, but i,m not sure what right for me . :-(
But there many treads now from 2018 til yet and it isn,t easy for me to understand, or better to find the right information's for me in this case (Android 10, downgrade,........ which Rom,....)
I would be very happy if someone can tell me understandable as I have to do exactly and which files are really needed to successfully downgrade with root on Android 9 (or 8?) and maybe even which Rom is recommended. Thanks for the time to have read this here.
Regards, paulhu
As I don't know the version, you can follow this video on YT, I hope it helps you.
Hello @hakli,
many thanks for your response.
Which version do you mean? The Galaxy J6 is: Galaxy SM J610FN / DS.
Thanks for the video, it's certainly very helpful.
What confused me most is with the two files that have to be flashed in a TWRP TREAD stood that it is not needed at Android 10, but there was no feedback from other users and in other places it's about it?
As far as the downgrade is concerned, another thing again ....
Greetings, Paulhu
paulhu said:
Hello @hakli,
many thanks for your response.
Which version do you mean? The Galaxy J6 is: Galaxy SM J610FN / DS.
Thanks for the video, it's certainly very helpful.
What confused me most is with the two files that have to be flashed in a TWRP TREAD stood that it is not needed at Android 10, but there was no feedback from other users and in other places it's about it?
As far as the downgrade is concerned, another thing again ....
Greetings, Paulhu
Click to expand...
Click to collapse
I will honest with you, it is not easy to install twrp on j6+ (any version) watch every vid on YT. but follow the video and install the stock rom, and there will be a file called , you have to follow and use the magisk app to root the phone. Sorry for the late reply. I am kind a busy.
And I don't know where do you live, if you are an American , Italian or Indian. once I know , then I can embed the video that you can follow, First follow the above video and install the stock rom from sam mobile. You can PM me too.