I cannot get my phone to boot up. It loads the splash screen and gets stuck there. It doesn't move past that screen. I've tried multiple times going into recovery mode but it won't go. I can get into download mode though. I've tried using Odin 3.07 to reflash the KIES_HOME_I317UCALJ2_I317ATTALJ2_215287_REV04_user_low_ship.tar.md5 from the back to stock rar I found here http://forum.xda-developers.com/showthread.php?p=41340941 and I do not know what to do next. I've even tried flashing a recovery tar file I found here http://forum.xda-developers.com/showthread.php?t=2533333. I've also tried removing the battery, replacing the battery (I have a second battery), and even if I power off the device and plug it up to my charger it loads the splash screen and stays there. I've looked around online and found this http://www.note2forum.com/forum/galaxy-note-2-help/1530-troubleshooting-samsung-galaxy-phone-bootloop.html#post20381 but can't even get to recovery mode to do a data wipe. The last thing I was able to do successfully with my phone was get it back to stock so and do the update to 4.1.2 because it was on 4.1.1 and I've seen something called SDS while searching. Is that what happened here? Is my phone able to be repaired? When I'm in download mode the upper left corner shows the following information:
ODIN MODE
PRODUCT NAME: SGH-I317
CUSTOM BINARY DOWNLOAD: Yes (3 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX WARRANTY VOID: 1
RP SWREV
I'm doing some serious reaching here because this is my primary phone, and I'm not familiar with PIT files but what I briefly read stated something about identifying which files go to which partition. I have no experience or knowledge of bootloader functions/changes and I've never checked more than auto reboot and reset time in ODIN. Any help is greatly appreciated.
Update!!! OMG I'm so happy to make progress. I flashed in ODIN the 4.3param_tz.tar file found herehttp://forum.xda-developers.com/showthread.php?t=2497994 and it successfully rebooted me into CWM. I will post the results of a ROM restore I'm attempting shortly. I was able to complete a full restore of a previous ROM and my phone is now currently booting up as I type this. Hopefully nothing goes wrong, but I've gotten farther now than I have in the past 5 hours I've been glued to my laptop. Time for a cig and beer.
Assassyn said:
I cannot get my phone to boot up. It loads the splash screen and gets stuck there. It doesn't move past that screen. I've tried multiple times going into recovery mode but it won't go. I can get into download mode though. I've tried using Odin 3.07 to reflash the KIES_HOME_I317UCALJ2_I317ATTALJ2_215287_REV04_user_low_ship.tar.md5 from the back to stock rar I found here http://forum.xda-developers.com/showthread.php?p=41340941 and I do not know what to do next. I've even tried flashing a recovery tar file I found here http://forum.xda-developers.com/showthread.php?t=2533333. I've also tried removing the battery, replacing the battery (I have a second battery), and even if I power off the device and plug it up to my charger it loads the splash screen and stays there. I've looked around online and found this http://www.note2forum.com/forum/gal...-samsung-galaxy-phone-bootloop.html#post20381 but can't even get to recovery mode to do a data wipe. The last thing I was able to do successfully with my phone was get it back to stock so and do the update to 4.1.2 because it was on 4.1.1 and I've seen something called SDS while searching. Is that what happened here? Is my phone able to be repaired? When I'm in download mode the upper left corner shows the following information:
ODIN MODE
PRODUCT NAME: SGH-I317
CUSTOM BINARY DOWNLOAD: Yes (3 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX WARRANTY VOID: 1
RP SWREV
I'm doing some serious reaching here because this is my primary phone, and I'm not familiar with PIT files but what I briefly read stated something about identifying which files go to which partition. I have no experience or knowledge of bootloader functions/changes and I've never checked more than auto reboot and reset time in ODIN. Any help is greatly appreciated.
Update!!! OMG I'm so happy to make progress. I flashed in ODIN the 4.3param_tz.tar file found herehttp://forum.xda-developers.com/showthread.php?t=2497994 and it successfully rebooted me into CWM. I will post the results of a ROM restore I'm attempting shortly. I was able to complete a full restore of a previous ROM and my phone is now currently booting up as I type this. Hopefully nothing goes wrong, but I've gotten farther now than I have in the past 5 hours I've been glued to my laptop. Time for a cig and beer.
Click to expand...
Click to collapse
Good for you! FYI, I think u can do a wipe through adb (adb wipe) I think. Nothing should go wrong after restoring your nandroid. (BTW, it's not sds.)
P.S. get a good beer and relax.
Smack that thanks button if I helped!
Note 2 LTE powered by Illusion ROM and Plasma Kernel.
Sent from dat small country called Singapore.
P.S. replies with quotes will be replied to faster.
Sadly ...we still can't dump that pathetic Knox bootloader ...yet...but progress is being made...
And if not...we can downgrade and still flash any rom we want...g
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Related
I have searched these forums and everywhere else I can find mentioning this problem online, but nothing has worked yet. I'm hoping someone here may be able to point me in the right direction.
I rooted my AT&T Galaxy Note 2 SGH-I317 a couple weeks ago and was messing around and stupidly tried upgrading to 4.3, and now I can't boot and can't enter recovery mode. NOTE: Download mode works just fine, either by manually holding Volume Down/Home/Power or by using a USB Jig, I just can't enter recovery mode by holding Volume Up/Home/Power
I am able to flash just fine with Odin (I have tried version 3.07 and 3.09), it says Pass every time but the darn phone still won't boot and won't let me into recovery mode so that I may clear the cache and get it to boot.
I have tried flashing back to the factory firmware, to which Odin says Pass but still no go on the boot.
I have also tried setting up an ADB connection in Windows 7 (so that I may get the phone into recovery mode without hardware buttons), but since my computer will only recognize the phone when it's in download mode (since I can't boot the phone so Windows 7 will see it like it normally would) ADB won't work.
I'm at my wits end here, does anyone have any clue how I may fix this problem? What's really frustrating is I just bought a Galaxy Gear Watch and about a week later messed up my phone
Thanks, and I appreciate any help you can give me.
EDIT: Forgot to mention something. When I turn the power to the phone on and don't enter download mode, it stays on the Samsung Galaxy Note II screen, and that's all that happens.
Also, this is exactly what my Download screen info says:
FACTORY MODE
PRODUCT NAME: SGH-I317
CUSTOM BINARY DOWNLOAD: Yes(6 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Official
KNOX WARRANTY VOID: 1
RP SWREV: A2
Got the phone to finally boot up
I finally got my phone to at least boot up. Although, I still can't get into recovery mode.
I followed this post: http://forum.xda-developers.com/showthread.php?t=2596256 and downloaded this file
It boots, and is currently 4.1.2, however when I try to get to recovery mode, the graphics flicker and the screen goes blank for a couple mins then reboots to the OS.
geekinator said:
I finally got my phone to at least boot up. Although, I still can't get into recovery mode.
I followed this post: http://forum.xda-developers.com/showthread.php?t=2596256 and downloaded this file
It boots, and is currently 4.1.2, however when I try to get to recovery mode, the graphics flicker and the screen goes blank for a couple mins then reboots to the OS.
Click to expand...
Click to collapse
I had a similar issue moving from Jedi to Jedi Master X.
I had to use an older Odin 2.85 to install a CWM recovery(I prefer TWRP UI)
Once I had the CWM I could install Jedi Master X2 and I had to wait about 30 mins for it to get through boot.
I thought I had a good soft brick but eventually I found a combiination of Odin, recovery and Rom to get it to work.
Good Luck
Recovery screen is now up!
After I was able to boot, I tried flashing again to stock firmware, and this time the recovery menu works just fine! I'm almost back to where I need to be. After resetting to factory defaults, I'm hoping I can do an OTA update to 4.3 so my Galaxy Gear will work again.
geekinator said:
After I was able to boot, I tried flashing again to stock firmware, and this time the recovery menu works just fine! I'm almost back to where I need to be. After resetting to factory defaults, I'm hoping I can do an OTA update to 4.3 so my Galaxy Gear will work again.
Click to expand...
Click to collapse
Update to 4.3 official will fail if you have a custom recovery...
I suggest using the leaked 4.3 we have...
It will give you all of the gear functions....and allow you to keep root and dump the bloat that you don't want...
A best case situation ....IMHO....g
Sent from my NOTE 2.750...
Courtesy of our amazing developers...
geekinator said:
After I was able to boot, I tried flashing again to stock firmware, and this time the recovery menu works just fine! I'm almost back to where I need to be. After resetting to factory defaults, I'm hoping I can do an OTA update to 4.3 so my Galaxy Gear will work again.
Click to expand...
Click to collapse
Glad you were able to figure it out... I just had a similar problem because TWRP froze up on me halfway through flashing a ROM. Had to ODIN CWMR back on and flash a ROM... lesson learned... always keep a ROM on your SD card in case your phone soft bricks - if you can get into download mode at least you will be able to work around it!!
I'll give that a try
gregsarg said:
Update to 4.3 official will fail if you have a custom recovery...
I suggest using the leaked 4.3 we have...
It will give you all of the gear functions....and allow you to keep root and dump the bloat that you don't want...
A best case situation ....IMHO....g
Sent from my NOTE 2.750...
Courtesy of our amazing developers...
Click to expand...
Click to collapse
Thanks, I'll definitely give that a try.
geekinator said:
Thanks, I'll definitely give that a try.
Click to expand...
Click to collapse
Instead of the leaked you can use the official without locking yourself into the 4.3 bootloader
http://forum.xda-developers.com/showthread.php?t=2589891
hi to all my senior
---------- Post added at 07:25 AM ---------- Previous post was at 07:17 AM ----------
i have problem with my samsung note 2 i317 of white screen of death i tried flashing with many file but no successes it always fail (ODIN) with latest version im able to go to download mode tryed with most of the firmware please help if any body can thankks in adv.
FACTORY MODE
PRODUCT NAME:
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY:Samsung official
SYSTEM STATUS: Custom
this much it shows on the download mode screen pls help Thanks.
i have problem with my samsung note 2 i317 of white screen of death i tried flashing with many file but no successes it always fail (ODIN) with latest version im able to go to download mode tryed with most of the firmware please help if any body can thankks in adv.
FACTORY MODE
PRODUCT NAME:
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY:Samsung official
SYSTEM STATUS: Custom
this much it shows on the download mode screen pls help Thanks.
So I tried to search online for a solution but nothing is helping. What happened was I woke up one day and my Tmobile galaxy s3 4.3 was showing the samsung logo for about 5 minutes. I removed my battery and turned the phone on. It turned on and then instantly the screen died. I'm somewhat of a newbie to phones...but i tried everything...download mode, recovery, safe mode, connecting to a computer cant recognize my device, and its not charging, no vibration when holding power button (hard bricked). I tried custom ROMs a while back and it messed up so i went back to stock with just root access. I found a video on YouTube that "helped" me. I followed his steps correctly and the phone did come alive...but it came alive to a screen I've never seen before. His video talked me through downloading a debrick file specific for T999 4.3 and then using a program called Win32 disk imager. His instructions were to extract the file and place it on my 16gb micro sd card and then place into my phone, so the file revived my phone because the phone finally turned on but I cant access the phone. Which leads me to my question (sorry for length, thought i would clarify all)... the screen I'm seeing right now is an all black screen with words in the top left, no android recovery logo or yellow triangle logo. I've tried to turn on and off the phone and download and recovery mode etc but nothing works. The screen reads as following:
BOOT RECOVERY MODE
CHECK BOOT PARTITION. .
COPY FROM T-FLASH. .
BOOT RECOVERY. .
WRITE 159488 sectors. .
FLASH WRITE FAILURE
ODIN MODE
PRODUCT NAME: SGH-T999
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: NONE
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 1
BOOTLOADER AP SWREV: 1
So any advice to help me unbrick my T999? Is it still bricked? Is my only option a JTAG? I checked that i had root access with a root checker and I've had many apps that require root access so does that mean the file i downloaded unrooted my phone? If so, since my phone reads as official and not custom, could Tmobile fix my phone even if I'm without warranty.
Any help would be appreciated, thanks!!
Hi
Thank you for using XDA assist
Please wait for moderation team to move this thread to T Mobile Galaxy S 3 Q/A section for better support
http://forum.xda-developers.com/galaxy-s3-t-mobile/help.
Good day!
I am in the same boot as you. My Tmobile S3 T999 just went black the other night all of sudden. It wouldn't not power up or do anything. Complete brick. I too loaded the image to SD card and the phone did turn on with the same message you got. But when I tried to flash with ODIN I get the "No pit partition" error every time. If anyone can help that would be great. Just need to be able to get my date off the phone such as photos and videos.
XDA Visitor said:
So I tried to search online for a solution but nothing is helping. What happened was I woke up one day and my Tmobile galaxy s3 4.3 was showing the samsung logo for about 5 minutes. I removed my battery and turned the phone on. It turned on and then instantly the screen died. I'm somewhat of a newbie to phones...but i tried everything...download mode, recovery, safe mode, connecting to a computer cant recognize my device, and its not charging, no vibration when holding power button (hard bricked). I tried custom ROMs a while back and it messed up so i went back to stock with just root access. I found a video on YouTube that "helped" me. I followed his steps correctly and the phone did come alive...but it came alive to a screen I've never seen before. His video talked me through downloading a debrick file specific for T999 4.3 and then using a program called Win32 disk imager. His instructions were to extract the file and place it on my 16gb micro sd card and then place into my phone, so the file revived my phone because the phone finally turned on but I cant access the phone. Which leads me to my question (sorry for length, thought i would clarify all)... the screen I'm seeing right now is an all black screen with words in the top left, no android recovery logo or yellow triangle logo. I've tried to turn on and off the phone and download and recovery mode etc but nothing works. The screen reads as following:
BOOT RECOVERY MODE
CHECK BOOT PARTITION. .
COPY FROM T-FLASH. .
BOOT RECOVERY. .
WRITE 159488 sectors. .
FLASH WRITE FAILURE
ODIN MODE
PRODUCT NAME: SGH-T999
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: NONE
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 1
BOOTLOADER AP SWREV: 1
So any advice to help me unbrick my T999? Is it still bricked? Is my only option a JTAG? I checked that i had root access with a root checker and I've had many apps that require root access so does that mean the file i downloaded unrooted my phone? If so, since my phone reads as official and not custom, could Tmobile fix my phone even if I'm without warranty.
Any help would be appreciated, thanks!!
Click to expand...
Click to collapse
Were you able to figure this out or find something that could help fix this problem? I ran in to the same situation about a week ago. I cant find any threads on any forums that seem to be able to solve this.
Yeah ive been looking for a solution just to be able to revive it only once more to resave all my data. But then i got my s6 so now my s3 is just collecting dust until someone finds a new method
Hi, so I recently rooted, flashed TWRP, and put SlimKat on my phone, and it worked great for a few days, but then all of a sudden it would freeze on the lockscreen. To fix this I would need to pull out the battery or do the hard reboot. Then, today, after doing that once again, when I tried to boot normally or into recovery, it showed static (I'll include an image). It does, however, boot into download mode.
So then, I thought I would try and put a new recovery on it through Odin to see if that would fix anything, but upon pushing start in Odin it says no PIT partition and fails.
I have a Nandroid backup made through TWRP (I'm not sure if the one on hand is from stock or right after flashing SlimKat).
In case you need this info, here is what it says when download mode is booted:
ODIN MODE
PRODUCT NAME: SGH-T889
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX WARRANTY VOID: 0
AP SWREV:
I'm hoping it isn't a hardware issue and that I can, if anything, put it back to stock.
Any help is greatly appreciated! Thank you!
Any update? I have read that when it loses model number it is one of the IC's. I still have model number when linked to odin.
Flashing in Odin may require the original Samsung USB cable in order to read the phone'a partition information.
Hoping for some advice how to get Sprint Note 4 running again. The phone has never been rooted. Up until a couple of weeks ago most of the OTA updates had been received and applied no problem. A couple of weeks ago my wife pulled it out of her bag and showed me it was on the update screen and had been for a couple of hours eventually the batter went dead. We took out the dead battery charged it and tried to restart. It goes to the Samsung Galaxy Note 4 white on black screen vibrates twice then the screen goes black and it repeats the same thing over and over.
Now i'm not sure how to proceed. I'm familiar with Odin and rooting my own phones but leave my wifes stock normally.
First i tried reset in recovery - When i boot to recovery after a few seconds the android robot lies on its back with a red triangle over it. At the top of the recovery screen it says Android system recovery - LRX22C.N910PVPU3BOF5. I tried wipe data/factory reset and wipe cache partion and rebooting but makes no difference.
I thought install official firmware manually
I put the phone in download mode it displays
current binary: samsung official
system status: official
reactivation lock: off
knox warranty void: 0x0
I downloaded a stock firmware N910PVPU3BOF5_N910PSPT3BOF5_N910PVPU3BOF5_HOME.tar.md5
installed Odin3 v3.10.6.exe
installed F/W this using Odin.
Odin finishes normally, box turns green and PASS! but the phone just restarts and does the boot looping thing.
I don't know what to do next - suggestions? Thanks
Have you tried booting to safe mode, you'll have to Google it as I'm not sure of the procedure for stock phone. What your describing doesn't sound good, I would have thought the odin flash would have worked.
You could always try to odin OG5 Stock tar, can be downloaded from kies. Sorry i cannot offer more but it sounds like you're doing all the right things.
Sent from my SM-G925P using Tapatalk
Yes, I agree, that's good advice. I'd say try KIES first, then safe mode if KIES doesn't yield results.
Did you get to safe mode? From power off, hold power until 2nd splash screen, release and press-hold power plus volume up until it boots or vibrates. I think if you continue to hold, it loops until you release but boots into safe mode.
Unlock screen and go into security (if it boots) and uncheck Reactivation lock, Knox active protection and make sure device isn't encrypted. Finger scanner; remove registered finger prints, and change lock-screen to swipe. Then factory reset or try whichever you prefer to try next. If normal reboot still fails, then factory reset in safe mode and reboot. If still loops, try the KIES or Odin flash. I'm not too familiar with stock and default security but looking at OG5 security options, seems there's redundancies that could potentially be in play preventing Odin flash as if the phone thinks the phone is in the hands of someone other than the registered owner. You may need to bypass it all to boot or flash.
Typically, it's data corruption that causes a loop that stock tar doesn't fix in tars OF5 and below. OG5 has frequent reports of wiping user data but I've seen occasional reports of inability to flash OG5 tar from OF5. I saw another today that reported having to Odin OF5 tar again and take OTA to get to OG5. I asked what the failure indications were but so far only know his rooted phone couldn't get there without taking those steps. So perhaps you're on the right track, it's just the security and our security that's being a hindrance.
Sent from my SM-N910P using Tapatalk
thanks for the suggestions. I tried booting into safe mode but i can never get past the first white on black Samsung Note 4 powered by android screen. No matter how long i hold just the power button it just goes black and back to this screen every few seconds. I never get to the second boot splash screen. Any other way to force the phone into Safe mode?
I've installed kies and smart switch. The phone is not recognized by either whilst boot looping. If i put it in download mode and connect it kies3 displays unsupported device. How do i get Kies let me download a copy of OG5 firmware to my pc to try with Odin? I can't figure this out. I connected my own Note 4 to kies and it recognizes it fine and displays This is the latest firmware Current og5 latest og5 but i still don't see how to download a fresh copy of OG5 to the PC? In Kies i go to Tools, Firmware upgrade and initialisation. I'm entering the model name SM-N910P and then it wants a serial number. How do i determine this? I tried the Dec and Hex numbers from the back of the phone, i tried the Hex number plus a 1 and plus a 9 - i read this is the imei and this is confirmed from looking in settings on my other note 4. I'd really like to get a clean download of sprint OG5 from Kies i've searched for instructions without success.
Suggestions what i can try next? Thanks
waroo14 said:
thanks for the suggestions. I tried booting into safe mode but i can never get past the first white on black Samsung Note 4 powered by android screen. No matter how long i hold just the power button it just goes black and back to this screen every few seconds. I never get to the second boot splash screen. Any other way to force the phone into Safe mode?
I've installed kies and smart switch. The phone is not recognized by either whilst boot looping. If i put it in download mode and connect it kies3 displays unsupported device. How do i get Kies let me download a copy of OG5 firmware to my pc to try with Odin? I can't figure this out. I connected my own Note 4 to kies and it recognizes it fine and displays This is the latest firmware Current og5 latest og5 but i still don't see how to download a fresh copy of OG5 to the PC? In Kies i go to Tools, Firmware upgrade and initialisation. I'm entering the model name SM-N910P and then it wants a serial number. How do i determine this? I tried the Dec and Hex numbers from the back of the phone, i tried the Hex number plus a 1 and plus a 9 - i read this is the imei and this is confirmed from looking in settings on my other note 4. I'd really like to get a clean download of sprint OG5 from Kies i've searched for instructions without success.
Suggestions what i can try next? Thanks
Click to expand...
Click to collapse
This may help your PC detect the phone better in recovery mode for KIES. Can't say it gets past unsupported device but it was a problem I had with adb in recovery on my Windows 8.1 machine. Read the OP and post 14 to see if it applies to you. Try detecting phone in recovery.
http://forum.xda-developers.com/showpost.php?p=34864154&postcount=14
I've always found safe mode a little difficult to get into but once I found my phone had went there when I was carrying something wrapped around the phone while in a belt pouch. Holding both buttons must have been the way it accidentally got there.
That unsatisfied s/n inquiry has puzzled some of us here and we haven't found a solution AFAIK.
I'm not sure but you may have to also Odin OF5 and take OTA like some others have had to do. There are some tar files in general forum that others succeeded with. Sorry but that's about all I can think of. Unless you can get it to Best Buy Samsung Experience or Sprint service center and explain what happened. They should be able to flash stock back on it. That may be best solution since there was no doubt about root or void warranty on that one.
Sent from my SM-N910P using Tapatalk
Thanks for the suggestions.
I found more instruction for getting into safe mode which work on my other note 4 but no success with this one.
I was trying to Odin OF5 it goes all the way through in Odin and displays success but never actually boots.
Would it be possible to replace the stock recovery with something else that might have additional features to get a working f/w to install and then downgrade back to stock or will i risk just making things more screwed up? I wouldn't care about taking OTA updates if i could just get a working F/W back onto this phone.
Encryption and security were not enabled on the phone.
So without S/N what is the work around to use Kies with Sprint phones?
Since you're pure stock and given the problems I'd stay away from a custom recovery at this point. Your reporting a successful odin flash of stock OF5 then rebooting right back to the same boot loop problem is sounding more and more like something has seriously failed in the phone, I'd start thinking replacement.
Sent from my SM-G925P using Tapatalk
I have a Note 8.0 that is stuck in a boot loop. It get to the initial screen. "Samsung Galaxy Note 8.0 GT-N5110" and then screen goes blank and it starts over again. Never goes past this screen. I have flashed a stock rom (\N5110UEU2COI3_N5110XAR2COI3_HOME.tar.md5) using odin. Odin gives me a pass when it is finished but the issue persists.
Any help with this is appreciated.
Re-flash the stock ROM but, before booting for the first time, boot into stock recovery and do a full wipe. This may help get out of the bootloop.
audit13, thanks for the suggestion. I tried 3 times with no success. I did see the android with his belly door opened and the blue box spinning. Didn't see that before. However when I boot into recovery the android's belly door has a red triangle in it. A full wipe/reset has no effect and the symptoms persist.
Any other thoughts? Thanks again
I recommend trying again with Odin 3.07.
In Odin, uncheck everything except f.reset time. Connect the tablet in download mode, flash the tar.md5 file in PDA. When you see the word "Reset" in the status window, remove USB cable, press and hold the power button to power off the unit. After the unit is off, use the key combination to boot immediately into recovery and perform a factory wipe/reset. If that doesn't work, you may need to flash the ROM in combination with a pit file.
audit13, tried your instructions and still ended up with the same issue. I used odin3 v3.07. Can you point me to the pit file you referred to in your previous post.
I have this file - BL_N5110UEU2CNE2_1498778_REV01_user_low_ship.tar.md5
and this - CSC_XAR_N5110XAR2CNE2_1498778_REV01_user_low_ship.tar.md5
Are they of any use to me in this situation?
Thanks again for taking an interest in my problem, Keith
Did you download the stock ROM from sammobile? If you did, you should unzip the file once which gives you a tar.md5 file. It is this tar.md5 that is flashed in the PDA section of Odin 3.07.
SamMobile has many countries listed but not USA. Do I use Cellular South? The file I have been trying was not from SamMobile.
When you boot into download mode, does it give you the model #? Do you see anything about Knox or warranty bit in download mode?
The firmware named in the original post looks like it matches Cellular South.
I'm not sure if the 5110 was sold in the USA. If your model is wifi only, another country may work. If it's celluar, different countries use different frequencies which means cross flashing may work but connectivity (wifi and cellular) may not work.
Download mode shows this:
Odin mode (in red)
Product name: GT-N5110
Current binary: Samsung Official
System status: Custom
Knox Warranty Void: 0
RP SWREV: A2
It's strange that you were able to flash a stock ROM but the system status is "custom".
I suggest trying to flash an entire ROM from sammobile.com similar to the BL and CSC you flashed earlier. It may be simplet to install a custom recovery and flash a custom ROM so you can at least confirm the baseband and bootloader currently installed.
I'll give a custom recovery and rom a try tonight after work. TWRP and any stable build correct?
As for those two separate files, I didn't try anything with them. I downloaded them in case I needed to use them.
This is a board that I got off eBay for $5 and I don't know it's history. Could this issue be hardware related? The board looks good with no signs of corrosion (water damage) of hot spots (electrical surge).
It seems as though it can't find the os on boot.
Thanks again.
Did the board ever boot or was it stuck in a bootloop from the beginning? How did you know which bootloader to flash?
The board has never booted. The only files I have flashed are the one in my first post and the one from SamMobile (Cellular South) as per your instructions. These two files appear to be one in the same. Both files when flashed produced the same result, boot loop.
Do the files contain a boot loader? It sure feels like that is where the problem lies.
Success! Flashed TWRP and then installed SlimKat 4.4.4 and all is working. Need to get gapps installed but for now this board is good.
audit13, thanks again for you interest in my issue.