I just recently installed the TWRP v2.6.3.0 on my 210R, and after trying to install the V5 FastDream ROM, it completes, and then TWRP says Updating partition details... and then the next line is E:Unable to mount '/system'. And then when I try to reboot into the ROM that completed installing, it just sits at the Samsung Galaxy Tab 3 screen. Is there something I'm doing wrong?
Having the same identical problem here with different ROM someone suggested using clockwork recovery. Just flashed that and did a recovery. I'll try and report back if that fixed the issue.
Sent from my SM-T210R using Tapatalk
guitarhero923 said:
I just recently installed the TWRP v2.6.3.0 on my 210R, and after trying to install the V5 FastDream ROM, it completes, and then TWRP says Updating partition details... and then the next line is E:Unable to mount '/system'. And then when I try to reboot into the ROM that completed installing, it just sits at the Samsung Galaxy Tab 3 screen. Is there something I'm doing wrong?
Click to expand...
Click to collapse
Nevermind
When in recovery go to the Mount tab and is system checked?
I had the same issue when installing my 1st custom rom. To resolve just reflash the custom rom again i.e. reboot into recovery manually (menu button + volume up + power button) then install the custom rom again.
I too had this problem, didn't try reflashing but switching to clockwork fixed it for me. I don't like it as much as TWRP but it worked
Sent from my GT-P6200 using Tapatalk 4
TWRP will not let select "System" under Mount. I have tried to reflash CWM Recovery with no avail. my tab locks up at the recovery boot screen. have to reflash TWRP back. now I have no Rom due to my mistake of making a backup on the device memory instead of my sd card. can someone knows where I can find a stock rom I can flash using Odin?.
The strockrom you can find at sammobile.com. You just sign in but its free.
I have the same device and had the same problem.
Instead of using TWRP or the ordinary CWM, @Ripshock suggested to me Phils CWM v2, here, and with absolutely one try, I had my RocketTab 3.1 up and running.
Just remember to always perform a backup with each recovery you experiment with. From personal experience TWRP, CWM and Phil's CWM v2, each backup differently, therefore, they only restore the backup they made (so i assume). But so far, my Tab works like a charm.
E: it sits at the Galaxy Tab screen because there is no OS installed once that system mount error occurs. Restore the stock backup and flash Phils CWM v2 with Odin.
ReeceWyld said:
I have the same device and had the same problem.
Instead of using TWRP or the ordinary CWM, @Ripshock suggested to me Phils CWM v2, http://forum.xda-developers.com/showthread.php?t=2468441, and with absolutely one try, I had my RocketTab up and running.
Just remember to always perform a backup with each recovery you experiment with. From personal experience TWRP, CWM and Phil's CWM v2, each backup differently, therefore, they only restore the backup they made. But so far, my Tab works like a charm.
Click to expand...
Click to collapse
I fix my problem reflashing CWM. TWRP has a problem and I wont use it until an official-tested version shows up.
benny3 said:
When in recovery go to the Mount tab and is system checked?
Click to expand...
Click to collapse
Good point!!
It happened the same to me after an spontaneous general failure in my Star B94M/Miz Z1 : Everytime I flash a new ROM, it says
Updating partitions...
E: Unable to mount '/cache'
E: Unable to mount '/data'
E: Unable to mount '/system'
Click to expand...
Click to collapse
As you said, they're unchecked in the tab "Mount" (TWRP v.2.4.4.0)
How can I solve this and get my poor phone to work again?
Thank indeed in advance
ChuSGC said:
Good point!!
It happened the same to me after an spontaneous general failure in my Star B94M/Miz Z1 : Everytime I flash a new ROM, it says
As you said, they're unchecked in the tab "Mount" (TWRP v.2.4.4.0)
How can I solve this and get my poor phone to work again?
Thank indeed in advance
Click to expand...
Click to collapse
Is that your TWRP Version 2.4.4.0?
If yes, its to old , flash The newest one TWRP 2.7.0.1.
Which Rom you want to flash?, depent ob Rom / updater script you need The newest Recovery Version.
bierma32 said:
Is that your TWRP Version 2.4.4.0?
If yes, its to old , flash The newest one TWRP 2.7.0.1.
Which Rom you want to flash?, depent ob Rom / updater script you need The newest Recovery Version.
Click to expand...
Click to collapse
0k, I'll try.
In this moment, it's only a brick.
So did you get a solution for the mounting issues ?
I have a same problem on my Umi Zero, TWRP is not unable to mount system and after wipe I cannot flash any ROM or even restore myu backup, it always says unable to mount /system. Any idea how to fix this?
Same proble with p900
i have same problem as you guys. I have E:Unable to mount '/cache' and yes i have unticked Cache. At star, it looks like it works, cyanogenmod loading screen appears and animation is running, but thats all. Nothing else i can do. Waiting about 2 hours still nothing. Any ideas ? TWRP is the latest 2.8.7.0
I had the same issue when I tried to change kernel and I couldn't: in my case (d802 with a working ROM) nothing was mounted (system, data, etc) even though I switched from TWRP to CWM and vice versa. However it came to me that I had encrypted the device and when I entered recovery, I was not prompted with the pin to unlock it. I had the latest version of TWRP (v.2.8.6) according to Flashify app and still nothing. Problem solved when I installed the TWRP by blastagator (v.2.8.7.3). By entering recovery, I am prompted with the pin to unlock device and everything works perfectly without touching anything my existing ROM!
12gage said:
I too had this problem, didn't try reflashing but switching to clockwork fixed it for me. I don't like it as much as TWRP but it worked
Sent from my GT-P6200 using Tapatalk 4
Click to expand...
Click to collapse
Thanks for this dude. I couldn't mount System with CW either but nevertheless it installed this rom (Sweet Dreams V2) on my gf's tablet like a charm.
hi guys i have a solution to the same problem
First try to format your data in wipe
then try to wipe cache,data,system' one by one
it worked for me
Good luck
today i found my old phone, bricked, i've spent my morning fixing it. i faced the same problem, my solution was: change the system from ext4 to ext2, then i went to Mount tab and checked the system. Works fine to me
im using TWRP_Win_JUL-2014.tar
you can change the ext4 to ext2 by: going to Wipe, Advanced Wipe -> FS options -> Change FS
Related
Everytime I try to flash an update.zip file using Rom Manager, it just reboots into clockwork recovery and does nothing. I've been having to manually flash in recovery. I've tried reflashing recovery, reinstalling Rom Manager, and even flashed stock image and rooted again, nothing fixes it. Any ideas?
Delete sry wrong post
go to rom manager and re download clockworkmod at top that worked for me. btw rom manager is having issues with some roms
Upstreammiami said:
go to rom manager and re download clockworkmod at top that worked for me. btw rom manager is having issues with some roms
Click to expand...
Click to collapse
Worked for me to. Takes just a few seconds.
Redemption 2.0.3. king kernel oc-uv #5. incredible revolution theme, rosie removed. Launcher pro. Prepare for glory splash. Various boot animations.
motempo said:
Everytime I try to flash an update.zip file using Rom Manager, it just reboots into clockwork recovery and does nothing. I've been having to manually flash in recovery. I've tried reflashing recovery, reinstalling Rom Manager, and even flashed stock image and rooted again, nothing fixes it. Any ideas?
Click to expand...
Click to collapse
Koush switched ROM Manager from fakeflash to real flash yesterday; maybe this is why you're having issues? Do you have S-OFF?
larsrya8 said:
Koush switched ROM Manager from fakeflash to real flash yesterday; maybe this is why you're having issues? Do you have S-OFF?
Click to expand...
Click to collapse
I've been having this issue for about a month or longer. I've tried on basically every rom, s-off. I've tried downloading clockwork again, no fix.
motempo said:
I've been having this issue for about a month or longer. I've tried on basically every rom, s-off. I've tried downloading clockwork again, no fix.
Click to expand...
Click to collapse
I've have the same problem, and it's been about the same amount of time, a little more than a month... I'm not sure what has happened to cause this, but I cannot get it fixed for the life of me.
Jim
Its a corrupted cache partition. I can post instructions later, you need to know how to use adb.
1.reboot to recovery and adb shell
2. mount /system (you can do this in clockworkmod under mounts and storage)
3.unmount cache(same as above mounts and storage)
3./system/bin/e2fsck -p /dev/block/mmcblk0p2
reboot
then 'Flash Recovery" from Rom Manager
Try to Backup with Rom Manager and it should work now
nevermind, fixed it, thanks luniz7
It seems like every time I mount my phone to Ubuntu on Oracle Virtual Box, my cache seems to get corrupted and I have to repair it all over again. Anyone have any ideas why that is?
luniz7 said:
Its a corrupted cache partition. I can post instructions later, you need to know how to use adb.
1.reboot to recovery and adb shell
2. mount /system (you can do this in clockworkmod under mounts and storage)
3.unmount cache(same as above mounts and storage)
3./system/bin/e2fsck -p /dev/block/mmcblk0p2
reboot
then 'Flash Recovery" from Rom Manager
Try to Backup with Rom Manager and it should work now
Click to expand...
Click to collapse
Bookmarked!
You are a lifesaver (or at least a significant time saver and stress reducer) luniz7!
Thanks
Hi, I will have my hands on this tablet very soon and want to use the Cleanrom that is listed in a thread here. This will be my first time doing this and have been searching around for a guide. I have read a few bits and pieces but would like someone to explain in a few steps so i can get this right the first time.
I found a guide to Root it at rootgalaxynote.com but would like to understand how to install the CleanROM.
Hello,
You have to install TWRP Recovery first, then you need to copy Rom.zip to storage and then flash it using Recovery, dont forget about Wipe.
52224489
WeedyEyes said:
Hello,
You have to install TWRP Recovery first, then you need to copy Rom.zip to storage and then flash it using Recovery, dont forget about Wipe.
Click to expand...
Click to collapse
I havent installed anything yet as i will be receiving it for christmas. Not 100% sure on process so was posting here hoping someone could explain the process a bit more in laymans terms as this will be the first time i will be doing this. i understand you have to root the device so you can change the ROM, wasnt sure on what to do after that.
reetzy said:
I havent installed anything yet as i will be receiving it for christmas. Not 100% sure on process so was posting here hoping someone could explain the process a bit more in laymans terms as this will be the first time i will be doing this. i understand you have to root the device so you can change the ROM, wasnt sure on what to do after that.
Click to expand...
Click to collapse
All you need is to Install Custom Recovery to change ROM, that will allow you to do anything you want with your device (such as System Backup/Restore, installing .zip packages, and etc.) read thread about TWRP so you can find everything you need to know.
But notice the fact you'll lose your warranty installing custom roms, as I know there is no way to change warranty bit back to 0 yet.
All information you need to know about Custom Roms is already there.
WeedyEyes said:
All you need is to Install Custom Recovery to change ROM, that will allow you to do anything you want with your device (such as System Backup/Restore, installing .zip packages, and etc.) read thread about TWRP so you can find everything you need to know.
But notice the fact you'll lose your warranty installing custom roms, as I know there is no way to change warranty bit back to 0 yet.
All information you need to know about Custom Roms is already there.
Click to expand...
Click to collapse
Thanks Weedy :good: Once i get this tablet i will give it a go.
Can you give me a link to the TWRP thread you refereed to thanks.
http://forum.xda-developers.com/showthread.php?t=2515656
Here you can find TWRP. I would recommend flashing the ".0"version because some people are having problems with the newer one
Worked fine for me , just did the same process as you
Sent by my Note 10.1 2014
benni2903 said:
http://forum.xda-developers.com/showthread.php?t=2515656
Here you can find TWRP. I would recommend flashing the ".0"version because some people are having problems with the newer one
Worked fine for me , just did the same process as you
Sent by my Note 10.1 2014
Click to expand...
Click to collapse
Thanks, all i need is Santa to hurry up now lol.
Are you sure you wanna get P600 not P605?
Make sure you get the right version, whether Quality or Exnyos. I had a freeze until I got the right version.
Sent from my SM-P600 using Tapatalk
In this guide what is this file for ?
Step 3. Download and unzip P600_Autoroot.zip:
rootgalaxynote.com/galaxy-note-10-1-root/how-to-root-galaxy-note-10-1-2014-edition/
Edit: Should i do this first before the TWPR?
Build says CleanRom 1.0 but all apps are still present
My build says CleanRom 1.0 but I still have all of the apps that others say are removed such as Sketchbook. My note was rooted using the AutoRoot file with Odin and then the stock recovery was flashed. I then used the twrp 3.0 file and booted into recovery. I then installed CleanRom (without reset per instructions) and the device rebooted and everything worked except all of the apps were still there. I then tried to re-flash CleanRom and perform the wipe but I then got stuck on the Samsung splash screen to no avail. I booted into recovery and tried re-flashing the CleanRom zip to no avail. All I could do to get this thing booted was to flash the auto-root file again in Odin, re-flash twrp, and install cleanrom again from the recovery but all of the apps are still there. Before I did any of this I had a bunch of the bloatware either frozen or uninstalled in Titanium but now some of those apps show lines through them in TBP. Either way, my device is showing CleanRom 1.0 under the build but I really don't think it is... any ideas on how to fix this?
Hi i'm a newbie on android
i've tried to install this rom a lot of time but unsuccessfully at any time
i've tried all the solutions i found here but none were successfull
i am under TWRP 2.6.3.0
my tablet is rooted but after the rom flash ,when i reboot ,just after the "galaxy note edition 2014" logo there's a black screen
the only way to repair is to flash with the mk1 stock rom after or to restore my old version saved with TWRP
can someone help ?
thanks
shoresteve626 said:
My build says CleanRom 1.0 but I still have all of the apps that others say are removed such as Sketchbook. My note was rooted using the AutoRoot file with Odin and then the stock recovery was flashed. I then used the twrp 3.0 file and booted into recovery. I then installed CleanRom (without reset per instructions) and the device rebooted and everything worked except all of the apps were still there. I then tried to re-flash CleanRom and perform the wipe but I then got stuck on the Samsung splash screen to no avail. I booted into recovery and tried re-flashing the CleanRom zip to no avail. All I could do to get this thing booted was to flash the auto-root file again in Odin, re-flash twrp, and install cleanrom again from the recovery but all of the apps are still there. Before I did any of this I had a bunch of the bloatware either frozen or uninstalled in Titanium but now some of those apps show lines through them in TBP. Either way, my device is showing CleanRom 1.0 under the build but I really don't think it is... any ideas on how to fix this?
Click to expand...
Click to collapse
Before flashing your rom perform a factory reset in twrp and format /data. All your apps will be deleted and you should be fine if you are stuck on the samsung boot logo it might help to boot into recovery and format /cache and dalvik cache
Sent by my Note 10.1 2014
Messed it up even more
benni2903 said:
Before flashing your rom perform a factory reset in twrp and format /data. All your apps will be deleted and you should be fine if you are stuck on the samsung boot logo it might help to boot into recovery and format /cache and dalvik cache
Sent by my Note 10.1 2014
Click to expand...
Click to collapse
So, I did the factory reset in twrp and then formatted the data. Naturally, everything was lost but when I went to install CleanRom it was no longer on the internal memory due to the format... but I did copy it to the Ext SD Card. MY problem is that twrp won't install the zip from the sd card. Each time it says its unable to mount "/data" even though I'm going into "advanced settings" and placing the check mark. I re-flashed twrp and tried using file manager to move the file to the internal storage but came up with the same problem. Also, I can't place the check on mount data for some reason. Now, my tablet starts to boot up but hangs on the samsung screen before the boot animation. Basically, its like there isn't any firmware on it and I tried re-doing the auto-root and stock recovery but thats a no go as well. Is this thing toasted?
shoresteve626 said:
So, I did the factory reset in twrp and then formatted the data. Naturally, everything was lost but when I went to install CleanRom it was no longer on the internal memory due to the format... but I did copy it to the Ext SD Card. MY problem is that twrp won't install the zip from the sd card. Each time it says its unable to mount "/data" even though I'm going into "advanced settings" and placing the check mark. I re-flashed twrp and tried using file manager to move the file to the internal storage but came up with the same problem. Also, I can't place the check on mount data for some reason. Now, my tablet starts to boot up but hangs on the samsung screen before the boot animation. Basically, its like there isn't any firmware on it and I tried re-doing the auto-root and stock recovery but thats a no go as well. Is this thing toasted?
Click to expand...
Click to collapse
Boot into TWRP and click "Restore Back Up" (Cannot remember exact verbiage) . Find where it says internal storage and press it and it will switch to a drop down and you can choose "External SD" Then go back and and it should be going to External SD instead of internal SD when you select install
Make sure you factory re-set. For safety, I advance wipe but I don't think that is necessary.
You may need to re-flash recovery if you're unable to access it.
shoresteve626 said:
So, I did the factory reset in twrp and then formatted the data. Naturally, everything was lost but when I went to install CleanRom it was no longer on the internal memory due to the format... but I did copy it to the Ext SD Card. MY problem is that twrp won't install the zip from the sd card. Each time it says its unable to mount "/data" even though I'm going into "advanced settings" and placing the check mark. I re-flashed twrp and tried using file manager to move the file to the internal storage but came up with the same problem. Also, I can't place the check on mount data for some reason. Now, my tablet starts to boot up but hangs on the samsung screen before the boot animation. Basically, its like there isn't any firmware on it and I tried re-doing the auto-root and stock recovery but thats a no go as well. Is this thing toasted?
Click to expand...
Click to collapse
Your device is not toasted I always have the Rom zip on the root directory of the device so formatting /data will not affect the rom zip. If you cant get it working then you might need to flash a firmware via odin and after that copy the rom on the internal root directory. Resetting your device should not format the whole internal storage so you can install the rom afterwards. Good luck mate
Sent by my Note 10.1 2014
Thanks for all the help!
benni2903 said:
Your device is not toasted I always have the Rom zip on the root directory of the device so formatting /data will not affect the rom zip. If you cant get it working then you might need to flash a firmware via odin and after that copy the rom on the internal root directory. Resetting your device should not format the whole internal storage so you can install the rom afterwards. Good luck mate
Sent by my Note 10.1 2014
Click to expand...
Click to collapse
After the holiday (and many stressful attempts) I was finally able to re-boot the device and get past the splash screen. Opening Kies seemed to "kick" past the splash screen even though it said my device wasn't compatible with Kies. Anyway, I flashed the stock recovery, wiped, reset, flashed original firmware via Odin, flashed TWRP again, and then installed the CleanRom zip. Phew... it's FINALLY over with no issues and running smooth. I think the problem came in with TWRP not wiping correctly even though it said it did. I do appreciate all of the help and advice as you guys are life-savers!
Exnyos?
sdelliott31 said:
Make sure you get the right version, whether Quality or Exnyos. I had a freeze until I got the right version.
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
How do you know with version you have?
jkitsmiller said:
How do you know with version you have?
Click to expand...
Click to collapse
Wifi Only Version = P600 = Exynos processor
Lte = P605 = Snapdragon800
Gesendet von meinem SM-P600 mit Tapatalk
When I installed with TWRP 2.6.3.3 & 2.6.3.1 I got the write permission denied and then I tried with 2.6.3.0 it got hung while installing CleanRom 1.5R2. Does anyone know how to resolve this issue? Thanks
hi i have a major issue this morning i flashed the dark one viper theme on my m8 i am rooted soff after it installed i hit the reboot button but when it rebooted it hung at boot screen so i hard rebooted and went to recovery which is philz recovery i then wiped cache and dalvic and rebooted but it still got stuck at the boot screen so i reentered recovery it took longer to load than usual and i was greeted with this message at the bottom of the screen
E: could not mount /data to setup /data/media path i tried to restore my nandroid backup but it failed at the data partion i also restored recover settings to default just incase id accidently pressed something i shouldnt have as the touchscreen is quite sensitive but nothing has worked does anybody know how i can fix this issue please i really need my phone any advise on this would be most appreciated thank you
Try to reflash recovery and see if it fixes the mounting problem. If it does restore your nandroid
Edit: or first try to wipe /data, /system, /cache and dalvik and then restore nandroid
thanks
thank you ill give it a try is this a common issue then its had me worried
You're telling that you are rootet. But are you also running the Viper ROM.? Guess you do as you flashed a corresponding theme.
If not the problem could be cause by flashing a Viper theme on a ROM not intended to work with it .
Sent from my HTC One_M8 using XDA Free mobile app
HTCNerdYoda said:
You're telling that you are rootet. But are you also running the Viper ROM.? Guess you do as you flashed a corresponding theme.
If not the problem could be cause by flashing a Viper theme on a ROM not intended to work with it .
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
yes sorry i am running viper rom it was updated yesterday but the theme wasnt so i asked in the theme thread and he said it was fixed to work with viper 2.1.0 so i downloaded and flashed it it flashed fine but after rebooting this happened thanks for the reply any advise is apreciated
Yeah, sounds like the theme is not compatible. Reflash the ROM.
BenPope said:
Yeah, sounds like the theme is not compatible. Reflash the ROM.
Click to expand...
Click to collapse
i tried doing a restore but it failed at the data partition ill try a reflash too thank you
stathis95194 said:
Try to reflash recovery and see if it fixes the mounting problem. If it does restore your nandroid
Edit: or first try to wipe /data, /system, /cache and dalvik and then restore nandroid
Click to expand...
Click to collapse
tried wiping data system ect. but its says error mounting data formatting system worked i also tried installing the rom but its says cant mount sd card format cache didnt work either
now when i power down from recovery it says apply root this is getting worse
Are you using twrp? Try to fix permissions. If it doesn't work maybe for some reason you lost root? Try to reflash supersu maybe?
atm im using philz but i was advised to wipe system ,data , and caches and now i have no sofware on the phone and i cant install anything as it cant mount data partion or internal sd card im not sure what to do someone has said to do a full wipe flash via sneakyghosts thread but im kind of lost and i have no idea what i need to do
Philz has fix permissions as well I think. Try it first...or as I suggested try to reflash supersu maybe you lost root
i cant find fix perms anywhere i flashed supersu but im still getting the error thanks but still nothing working
i started to flash viper rom again it failed but it seems to have fixed the su problem but i still cant acess internal sd card or data partition any ides please would be apreciated thanks
Can you try to reflash Philz?
If you have no success can you try and flash TWRP and see if it makes any difference? I'm just trying to eliminate all variables.
stathis95194 said:
Can you try to reflash Philz?
If you have no success can you try and flash TWRP and see if it makes any difference? I'm just trying to eliminate all variables.
Click to expand...
Click to collapse
thank you im going to have to find them as i sent my phone to a shop to rooted but im sure that wont be too hard
ok got philz from its op as i already made a post in there i will trh that and get back to you thanks
Flash all the things!
i have reflashed philz and it still isnt reading internal sd or my data partition
edit same problem with twrp i tried fixing perms but it failed at data partion
I have your solution ?
Why?
Because I had exact same problem as you have now.
I'm on venom rom. Flashed 2.0.0 rom had not updated firmware however.
After flashing theme Viper dark I got very, very, very long boot time.
After 15 mins or so I hard "button rebooted" device. Resulting in data block being totally corrupted.
As your virtual SD card is a partition on /Data, and data is totally corrupted you won't see or be able to mount your SD card too.
Reflashing recovery, rom or whatever won't help /data stays corrupt.
Now the best part....
I got the tools for you to make your data block fine again, so it again can be mounted and you can see and use the internal sdcard.
You will of course loose anything on the data and virtual sdcard so you must flash a rom after fixing data.
Tools are on my pc, and I'm on my phone right now so I will upload it later and give you link and instructions.
That is if you still have this problem.
Vi553r said:
I have your solution ?
Why?
Because I had exact same problem as you have now.
I'm on venom rom. Flashed 2.0.0 rom had not updated firmware however.
After flashing theme Viper dark I got very, very, very long boot time.
After 15 mins or so I hard "button rebooted" device. Resulting in data block being totally corrupted.
As your virtual SD card is a partition on /Data, and data is totally corrupted you won't see or be able to mount your SD card too.
Reflashing recovery, rom or whatever won't help /data stays corrupt.
Now the best part....
I got the tools for you to make your data block fine again, so it again can be mounted and you can see and use the internal sdcard.
You will of course loose anything on the data and virtual sdcard so you must flash a rom after fixing data.
Tools are on my pc, and I'm on my phone right now so I will upload it later and give you link and instructions.
That is if you still have this problem.
Click to expand...
Click to collapse
exellent thank you so much i appreciate it very much yes i do still have the problem ive been researching all day and asking in various threads i have something on standby but ill wait to see what you did as you have alraedy encountered this problem thank you again
When i flashed the rom it says mount: failed to mount /dev/block/mmcblk0p28 at /data failed; no such volume
i dont know it then i flashed gapps and format /system and /data and reboot
Then it says uncryption unsuccesful
yup, that makes two of us. tried installing lollipop and phone went funky, not sure how to fix it. tried google but nothing helpful, hopefully somebody can help us on this.
Both of you have the right recovery?
Any fix??
Yes
Sent from my SM-G900F using XDA Forums Pro.
1-Install stock rom using ODIN and use OPS file , don't forget to wipe data after installation completes
2-Install CWM right version for your phone using ODIN
3-Install any ROM you want
hit thanks if it helped , if not please explain in more details your problem
Ok, for the Encryption unsuccessfull problem, this is what I did to get my Galaxy W to work.
In addition to format /system, /data etc, I had to format /storage/sdcard0 as EXT4. This gets past the Encryption unsuccessful problem, and I can flash the ROM CM12 and get it running.
But, I'm running into a weird problem that no one else seems to have come across. I can flash gapps 5.1.x, apparently without any failure messages on the flash window, and boot up.
Once the boot up is completed, I cannot see any of the Google apps icons at all !!?
I followed the same flashing process when installing CM 11 and 4.4 gapps, and this works fine. With CM 12, 5.1 gapps, I don't get any Google apps.
Anyone else came across this?
PS: After looking in the right place, many (all?) have the gapps problem in the cm-12.1-20150912-UNOFFICIAL-ancora thread. But I've also tried the RR rom with OTA updates. RR works - OTA just sits there with a blank page.
I can't install any ROM, gets stuck on no MD5 file found for about 5 minutes then says script succeeded result was [*********************************] then I go to reboot and get red LED flash. Help?
Aiwa said:
I can't install any ROM, gets stuck on no MD5 file found for about 5 minutes then says script succeeded result was [*********************************] then I go to reboot and get red LED flash. Help?
Click to expand...
Click to collapse
What system version are you currently running
Post your steps that you did
itsbighead said:
What system version are you currently running
Post your steps that you did
Click to expand...
Click to collapse
I am on 5.0 running CloudyG3, the only ROM that'll flash..
I booted into Recovery
Wiped data
Installed ROM
hangs on md5 check (sometimes says 'cannot unmount /system; no such volume)
says done with that script successful [*******]
reboot
red LED
I've tried wiping system aswell and everything, tried mounting system etc
Were you running Lollipop or KitKat before you installed TWRP?
itsbighead said:
Were you running Lollipop or KitKat before you installed TWRP?
Click to expand...
Click to collapse
KitKat as I restored to stock then updated to CloudyG3.
I've made some progress but then I get: unmount of /system failed no such volume
even though i'm pretty sure i've mounted system
Aiwa said:
KitKat as I restored to stock then updated to CloudyG3.
I've made some progress but then I get: unmount of /system failed no such volume
even though i'm pretty sure i've mounted system
Click to expand...
Click to collapse
Boot into TWRP
Go into Mount
Untick System
And see if it helps. I used to have this problem along time ago when i was trying to install MIUI on my Nexus 5 and i remember reading that
itsbighead said:
Boot into TWRP
Go into Mount
Untick System
And see if it helps. I used to have this problem along time ago when i was trying to install MIUI on my Nexus 5 and i remember reading that
Click to expand...
Click to collapse
Unticked, still not working!
Aiwa said:
Unticked, still not working!
Click to expand...
Click to collapse
Does this happen with any other roms or when you try to restore a Nandroid or TWRP backup?
itsbighead said:
Does this happen with any other roms or when you try to restore a Nandroid or TWRP backup?
Click to expand...
Click to collapse
Backup restores just fine! It happens on other roms such as fusion.
someone help
Im Having the same issue- On a different phone
m7 sprint. I messed up and had to RUU. Tried the most recent - it didn't work.
Kept going back until I found one that did.
After that Got everything straight installed TWRP/(tried CWM too)
Goes to flash rom and get the unable to unmount /system no such volume error.
Driving me crazy .
Can make and Restore Nandroids no problem.....