I upgraded to 4.3 stock. Then rooted, then upgraded to 4.4.2 custom.
Then decide to get back to 4.3. By a mistake i restored in ODIN to 4.1.1 (stupid me)
After restore, phone won't boot. Actually I cannot do anything......except for going into download mode, where I got "knox warranty void:1". And that is it! Nothing else can be done........i cannot even boot into recovery............
Any help??? Or should i toss it against the wall??
http://forum.xda-developers.com/showthread.php?t=2581321
HOW-TO Downgrade from 4.3 OFFICIAL MK6 to LJ2 4.1.1
Did you thank your Developer today?
Jspex said:
http://forum.xda-developers.com/showthread.php?t=2581321
HOW-TO Downgrade from 4.3 OFFICIAL MK6 to LJ2 4.1.1
Did you thank your Developer today?
Click to expand...
Click to collapse
TY!! I did that already..........and STILL cannot boot into recovery AFTER this.... any idea???
Your profile says Verizon. This stuff is for at&t.
But you can reinstall TWRP if you can get in download mode.
rangercaptain said:
Your profile says Verizon. This stuff is for at&t.
But you can reinstall TWRP if you can get in download mode.
Click to expand...
Click to collapse
VERIZON?? Oops!! That was years ago.....forgot to change it. Sorry.
And yes, i did install recovery via odin. But i cannot boot into recovery.....
Home+volume up and hold in power until you see first screen, then let go of power but contine to hold in home+volume up until you see TWRP screen.
Otherwise, use "adb reboot recovery" command.
rangercaptain said:
Home+volume up and hold in power until you see first screen, then let go of power but contine to hold in home+volume up until you see TWRP screen.
Otherwise, use "adb reboot recovery" command.
Click to expand...
Click to collapse
Unfortunately, device list is empty.... got drivers installed.
Powered usb port stock cable correct pc directory?
rangercaptain said:
Powered usb port stock cable correct pc directory?
Click to expand...
Click to collapse
Yup.
Mine is doing the exact same thing. Wont show up in adb and wont boot in recovery, but can get in download, flashed twrp through odin and still cant get into recovery
There is some procedure that forces recovery that involves taking out the battery at a certain point during bootup, but I don't know it. Maybe start a new question thread about that?
Try flashing the 4.1.1 firmware from sammobile. it is the older of the 2 from att and it does not show a version number on the Sammobile site. Then flash root/cwm all through odin. Then do the battery pull trick to recovery. You may need the root and custom recovery to get the rest to work right.
Did you thank your Developer today?
Jspex said:
Try flashing the 4.1.1 firmware from sammobile. it is the older of the 2 from att and it does not show a version number on the Sammobile site. Then flash root/cwm all through odin. Then do the battery pull trick to recovery. You may need the root and custom recovery to get the rest to work right.
Did you thank your Developer today?
Click to expand...
Click to collapse
Done that, NO luck.
When you pull the battery does it boot automatically into download mode? Or do you have to power the device up yourself?
Also have you tried to odin a root injected 4.1.1 fw yet? You may have to dig through the dev section but I know they are there.
Have you tried flashing the leak 4.3 yet? http://forum.xda-developers.com/showthread.php?t=2496292
JSS15J.I317UCUBMJ4 (Android 4.3)
Really at this point I'm spit balling.
Did you thank your Developer today?
Jspex said:
When you pull the battery does it boot automatically into download mode? Or do you have to power the device up yourself?
Also have you tried to odin a root injected 4.1.1 fw yet? You may have to dig through the dev section but I know they are there.
Have you tried flashing the leak 4.3 yet? http://forum.xda-developers.com/showthread.php?t=2496292
JSS15J.I317UCUBMJ4 (Android 4.3)
Really at this point I'm spit balling.
Did you thank your Developer today?
Click to expand...
Click to collapse
After battery pull out, I have power it back on. (power-home-vol/up - Galaxy Note II screen, and sits there. power-home-vol/down - download screen)
Tried 4.1.1 in odin, tried 4.1.2 as well, and rooted it in odin right away, all went OK, passed, but after battery pull out, still didn't go beyond Galaxy Note II screen.
Tried 4.3 in odin, but at the end, got "failed" result.
Damn.............for some reason, i know this has something to do with bootloader. I am not "android" guy, but rather PC computer freak... ......if i only know how to completely reformat entire storage space, and start from the scratch.....but unfortunately, this is not a hard drive....
fuzio1963 said:
After battery pull out, I have power it back on. (power-home-vol/up - Galaxy Note II screen, and sits there. power-home-vol/down - download screen)
Tried 4.1.1 in odin, tried 4.1.2 as well, and rooted it in odin right away, all went OK, passed, but after battery pull out, still didn't go beyond Galaxy Note II screen.
Tried 4.3 in odin, but at the end, got "failed" result.
Click to expand...
Click to collapse
Just for me try this: flash 4.1.1 and as soon as the device reboots pull the battery. Dont let it get a chance to do anything. Then boot it into download mode and flash the chainfire superuser with Stock recovery built in. That can be found a in the stickey how to revery to stock thread in this exact forum. Then on reboot after flash pull the battery and let it sit for 5 min, no less. Then try to boot into recovery. If you can get into stock recovery there is hope.
I know you may have tried this already but please try it one last time for me. Keep in mind you should pull the phone Off the usb as soon as the odin flashs are done. Pulling the battery while it is still plugged in wont cut the power the way you need it to in order to reboot properly. Also if you have an external sd card in pull that sucker out as well. Sd cards can hang things up sometimes.
Like I said spitballing here. If all else fails maybe you can talk a dev into wrapping a rom into an odinable .tar file and try to force a rom on it.
Did you thank your Developer today?
Jspex said:
Just for me try this: flash 4.1.1 and as soon as the device reboots pull the battery. Dont let it get a chance to do anything. Then boot it into download mode and flash the chainfire superuser with Stock recovery built in. That can be found a in the stickey how to revery to stock thread in this exact forum. Then on reboot after flash pull the battery and let it sit for 5 min, no less. Then try to boot into recovery. If you can get into stock recovery there is hope.
I know you may have tried this already but please try it one last time for me. Keep in mind you should pull the phone Off the usb as soon as the odin flashs are done. Pulling the battery while it is still plugged in wont cut the power the way you need it to in order to reboot properly. Also if you have an external sd card in pull that sucker out as well. Sd cards can hang things up sometimes.
Like I said spitballing here. If all else fails maybe you can talk a dev into wrapping a rom into an odinable .tar file and try to force a rom on it.
Did you thank your Developer today?
Click to expand...
Click to collapse
Stand by..........will do this right now.
Cool, let us know if this actually worked. This seems to be a problem for 1/2 the people that try the revert to 4.1.1 method.
Did you thank your Developer today?
Jspex said:
Cool, let us know if this actually worked. This seems to be a problem for 1/2 the people that try the revert to 4.1.1 method.
Did you thank your Developer today?
Click to expand...
Click to collapse
Sent you a PM.
fuzio1963 said:
Sent you a PM.
Click to expand...
Click to collapse
Seems like i didnt get it and im not seeing the one I just sent you in my outbox. You can email me [email protected] or if you irc I'm always in #jedi on coldfront.net
Did you thank your Developer today?
Related
Hello.. So today I attempted to flash a new version of TWRP for installing cleanrom and it bricked my phone. I can get into download mode though
So using ODIN i've been trying to install custom recoveries. Everytime it says pass, but I cannot get a recovery to show up. If I hold up, power and home buttons, the Galaxy note 2 will flash (as if its about to load a recovery) but then just goes back to galaxy note 2 screen. I can still make it to download mode, but cannot seem to get anywhere else.
Also, currently there is no rom on my phone.
Please help!
Thanks,
AC
AC2020x said:
Hello.. So today I attempted to flash a new version of TWRP for installing cleanrom and it bricked my phone. I can get into download mode though
So using ODIN i've been trying to install custom recoveries. Everytime it says pass, but I cannot get a recovery to show up. If I hold up, power and home buttons, the Galaxy note 2 will flash (as if its about to load a recovery) but then just goes back to galaxy note 2 screen. I can still make it to download mode, but cannot seem to get anywhere else.
Also, currently there is no rom on my phone.
Please help!
Thanks,
AC
Click to expand...
Click to collapse
Maybe use odin to start over fresh? Is the recovery separate from the kernel in the Note II?
Sent from my Apple IIe
billyjed said:
Maybe use odin to start over fresh? Is the recovery separate from the kernel in the Note II?
Sent from my Apple IIe
Click to expand...
Click to collapse
I think it is separate. The last thing I had was beanstalk with neak kernel. Then I wiped everything (not sure if that affect kernel or not) to prepare for cleanrom.
How do I use odin to start fresh?
Thanks!
AC2020x said:
I think it is separate. The last thing I had was beanstalk with neak kernel. Then I wiped everything (not sure if that affect kernel or not) to prepare for cleanrom.
How do I use odin to start fresh?
Thanks!
Click to expand...
Click to collapse
Install a factory image (probably with root and custom recovery) then proceed to flash whatever from there.
Sent from my Apple IIe
billyjed said:
Install a factory image (probably with root and custom recovery) then proceed to flash whatever from there.
Sent from my Apple IIe
Click to expand...
Click to collapse
Okay thanks,
I will have to try this after work. This may be a stupid question, but if anyone knows a good location where I can find this that would be really helpful.
I can search around for it more later.
Thanks
I bet Google knows.
Sent from my Apple IIe
SamMobile is a great site for firmwares.
After the screen turns on, let go of power and continue to hold up and home. Try it out.
johntortorella said:
SamMobile is a great site for firmwares.
Click to expand...
Click to collapse
mertin said:
After the screen turns on, let go of power and continue to hold up and home. Try it out.
Click to expand...
Click to collapse
Thanks.. I'm downloading from Sam Mobile now on my laptop at work.
And thanks for the tip. I will try this out as soon as I get home. I really hope my phone isn't pertinently bricked!
AC2020x said:
Thanks.. I'm downloading from Sam Mobile now on my laptop at work.
And thanks for the tip. I will try this out as soon as I get home. I really hope my phone isn't pertinently bricked!
Click to expand...
Click to collapse
If you need something to follow, this will help too.
Link
when you're "bricked" that means you can NOT get into download mode, so you are NOT bricked....
wase4711 said:
when you're "bricked" that means you can NOT get into download mode, so you are NOT bricked....
Click to expand...
Click to collapse
Oh sorry, I wasn't sure what the term bricked actually encompassed. I guess I was stuck in bootloop then.
Well, good and bad news. I got out of the bootloop, and finally got twrp installed on my phone. I did a recovery of beanstalk and also a fresh install of cleanrom. While they boot, they both have been going extremely slowly. Also just loading into recovery is taking super long. I don't know why. I am also not getting any signal, I can however connect to wifi. Anyone have any ideas or any thoughts on how to fix this?
Thanks again!
hey
if you can get into download mode try this find your provider and phone model and download the firware the nice thing this has root already installed so then you can just download goo and install twrp easy i always use this
http://forum.xda-developers.com/showthread.php?t=2004650
make sure you read it all so you have no problems all done with odin make sure you double check the check mark boxes well read and you will know what i am talking about
bigtomcat said:
if you can get into download mode try this find your provider and phone model and download the firware the nice thing this has root already installed so then you can just download goo and install twrp easy i always use this
http://forum.xda-developers.com/showthread.php?t=2004650
make sure you read it all so you have no problems all done with odin make sure you double check the check mark boxes well read and you will know what i am talking about
Click to expand...
Click to collapse
Just tried it out and it had the same problem. installed with ODIN no problem, but I still have no signal and it is still running very choppy.
When I go to mobile networks in settings it tells me "Insert SIM card to access network services" I have a sim and have tried reinserting it multiple times. I don't know whats going on. Also, it seems I do not have any internal storage. It says 200mb in storage that are fully used. When I have cleared everything but the rom.
I may attempt to return the phone tomorrow.
hey
AC2020x said:
Just tried it out and it had the same problem. installed with ODIN no problem, but I still have no signal and it is still running very choppy.
When I go to mobile networks in settings it tells me "Insert SIM card to access network services" I have a sim and have tried reinserting it multiple times. I don't know whats going on. Also, it seems I do not have any internal storage. It says 200mb in storage that are fully used. When I have cleared everything but the rom.
I may attempt to return the phone tomorrow.
Click to expand...
Click to collapse
nope a lot of people have that problem you have to remove your sim card and sd card and flash again then reboot i have seen people do this 3 times to clear all the bad flashes stuck on there phones make sure to factory reset too after by being off then hold down home power and volume up when you see the words pop up let go of all but volume up get into the system setting there factory all and restart then once you give it about 10 min put you sim card and sd card back and before wipe the sd card it has been know to cause some problems if that all doesn't work then ya maybe there is something else
good luck
I'm pretty sure I made a rookie mistake and I'm facing the conscience. Last night I was need of rooting my phone (at&t galaxy note II i317) using Kongo Android to get superUS and everything was going fine, I still had all my stuff, service and everything, so I decided to add a custom ROM (cm-10.1.3-tOlteatt), wiped everything and I ended up in a bad situation, I forgot to back up my phone so I lost all of my contacts, lost my service provider so I have no signal, and can't download any apps because I don't have play store. . . If anyone knows to way to help solve this PLEASE HELP ME. . . all I want to do now is find a way to uninstall all this rooted stuff and go back to my regular functioning galaxy s note II
THANK YOU FOR THE HELP IN ADVANCE
Check here for help:thumbup::
http://forum.xda-developers.com/showthread.php?p=49616709
You can also look here:
http://forum.xda-developers.com/showthread.php?p=41340941
And you should have used this for your rooting needs...
http://forum.xda-developers.com/showthread.php?p=33854391
And from the sounds of it, you downloaded the wrong Rom for your phone! And it's always bad skiing stuff late when we're tired. That's when we run into problems. It's called late night flashing
Sent from my SAMSUNG-SGH-I317 using Tapatalk
ViiRuZ said:
I'm pretty sure I made a rookie mistake and I'm facing the conscience. Last night I was need of rooting my phone (at&t galaxy note II i317) using Kongo Android to get superUS and everything was going fine, I still had all my stuff, service and everything, so I decided to add a custom ROM (cm-10.1.3-tOlteatt), wiped everything and I ended up in a bad situation, I forgot to back up my phone so I lost all of my contacts, lost my service provider so I have no signal, and can't download any apps because I don't have play store. . . If anyone knows to way to help solve this PLEASE HELP ME. . . all I want to do now is find a way to uninstall all this rooted stuff and go back to my regular functioning galaxy s note II
THANK YOU FOR THE HELP IN ADVANCE
Click to expand...
Click to collapse
Let's turn the frown upside down..... How's it going ??
Bajanman said:
Check here for help:thumbup::
http://forum.xda-developers.com/showthread.php?p=49616709
You can also look here:
http://forum.xda-developers.com/showthread.php?p=41340941
And you should have used this for your rooting needs...
http://forum.xda-developers.com/showthread.php?p=33854391
And from the sounds of it, you downloaded the wrong Rom for your phone! And it's always bad skiing stuff late when we're tired. That's when we run into problems. It's called late night flashing
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
Thanks for the recommendation but I've previously tried the method, but my phone always failed to download (even when it wasnt rooted) would u have any other way of solving it without having to use odin. . . my phone is currently stuck in recovery mode so any help trying to get out of it would be helpful. .thank you for your time helping me solve my issue
Put the correct ROM on your external sd card with a PC adaptor. Install the card, boot into recovery, wipe system and data, then install the correct ROM. Boot, let rhe phone settle in for a few minutes, connect to wifi, or check if the correct ROM has the at&t APN settings.
ViiRuZ said:
Thanks for the recommendation but I've previously tried the method, but my phone always failed to download (even when it wasnt rooted) would u have any other way of solving it without having to use odin. . . my phone is currently stuck in recovery mode so any help trying to get out of it would be helpful. .thank you for your time helping me solve my issue
Click to expand...
Click to collapse
Ranger is correct, try doing what he suggested.
But not really understanding what you have tried from your post.....
Which method, and what does fail to download?
Do you mean fail to get into download mode, and you only can get into recovery?
Are you doing this to get to download mode?
Put your Note 2 in Download Mode
-First you will need to turn off your device.
-Once it’s off, you need to press this button combination: volume down, power button and home button.
-Keep them pressed until the download mode shows up.
-Once you’re there, you will be required to press volume up to enter the download mode or volume down to cancel and reboot the device.
Obviously you want to press the volume up. Now you are ready to ODIN flash.
rangercaptain said:
Put the correct ROM on your external sd card with a PC adaptor. Install the card, boot into recovery, wipe system and data, then install the correct ROM. Boot, let rhe phone settle in for a few minutes, connect to wifi, or check if the correct ROM has the at&t APN settings.
Click to expand...
Click to collapse
i will be sure to try this method whenever i get my hands on an SD card adaptor. What ROM would be best to download for the correct at&t APN settings? i would look but my past luck has been failure.
Thank you for your help
dicksteele said:
Ranger is correct, try doing what he suggested.
But not really understanding what you have tried from your post.....
Which method, and what does fail to download?
Do you mean fail to get into download mode, and you only can get into recovery?
Are you doing this to get to download mode?
Put your Note 2 in Download Mode
-First you will need to turn off your device.
-Once it’s off, you need to press this button combination: volume down, power button and home button.
-Keep them pressed until the download mode shows up.
-Once you’re there, you will be required to press volume up to enter the download mode or volume down to cancel and reboot the device.
Obviously you want to press the volume up. Now you are ready to ODIN flash.
Click to expand...
Click to collapse
i would have tried ODIN for this situation but everytime i do. It says "FAILED" how would you suggest i fix this so that my phone can use ODIN. I was going from cyanogenMod to a custom ROM, but i assume i didnt flash the old ROM and now i kinda stuck in a bootloop like it'll show the samsung intro then show the customROM emblem stays there. I've left it in that state for a whole night and it didnt change (still showing the custom ROM emblem) the only thing i can do is enter TWRP v2.6.3.1 and access my external SD.
ViiRuZ said:
i would have tried ODIN for this situation but everytime i do. It says "FAILED" how would you suggest i fix this so that my phone can use ODIN. I was going from cyanogenMod to a custom ROM, but i assume i didnt flash the old ROM and now i kinda stuck in a bootloop like it'll show the samsung intro then show the customROM emblem stays there. I've left it in that state for a whole night and it didnt change (still showing the custom ROM emblem) the only thing i can do is enter TWRP v2.6.3.1 and access my external SD.
Click to expand...
Click to collapse
I don't understand this ....... It says "FAILED" What is failing ?
What are you flashing?
dicksteele said:
I don't understand this ....... It says "FAILED" What is failing ?
What are you flashing?
Click to expand...
Click to collapse
Sorry bout that. . just tried to connect my phone to ODIN in ODIN MODE. I'll update with what happened.
Just got done trying to flash with ODIN, and it got the part where it starts to install but 4 mins. in my device was removed. I was using the PDA from sammobile.com, and now my phone is saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." i know it might be as simple as actually doing what it says but Kies will not recognize my At&t samsung galaxy note II. What would u suggest to let my laptop recognize my device??
rangercaptain said:
Put the correct ROM on your external sd card with a PC adaptor. Install the card, boot into recovery, wipe system and data, then install the correct ROM. Boot, let rhe phone settle in for a few minutes, connect to wifi, or check if the correct ROM has the at&t APN settings.
Click to expand...
Click to collapse
Thank you for your time helping me with my phone issue. I took the steps you suggested, now im running custom ROM jellybean 4.1.1. and got my service provider back. If you could suggest away to get my stock program and upgrade to jellybean 4.3. I had fun with the rooted life but i make the worst mistakes.
PS. i found it to be alot easier using the other tar. in the firmware u suggested me to use. At least for At&t Samsung Galaxy Note II
rangercaptain said:
Put the correct ROM on your external sd card with a PC adaptor. Install the card, boot into recovery, wipe system and data, then install the correct ROM. Boot, let rhe phone settle in for a few minutes, connect to wifi, or check if the correct ROM has the at&t APN settings.
Click to expand...
Click to collapse
So i just flashed my at&t Samsung galaxy note II with jellybean 4.1.1 using Odin ( ATT_I317UCAMA4_I317ATTAMA4) and it was going on with everything working. Then i tried to update to jellybean 4.3 after it got done installing it rebooted, and what do u know, i'm stuck in boot loop the Samsung galaxy note 2 logo, and cant access recovery mode. Also I tried the original firmware that used repeatedly,would that hurt the system. Would there be any firmwares suggested to use.
ViiRuZ said:
So i just flashed my at&t Samsung galaxy note II with jellybean 4.1.1 using Odin ( ATT_I317UCAMA4_I317ATTAMA4) and it was going on with everything working. Then i tried to update to jellybean 4.3 after it got done installing it rebooted, and what do u know, i'm stuck in boot loop the Samsung galaxy note 2 logo, and cant access recovery mode. Also I tried the original firmware that used repeatedly,would that hurt the system. Would there be any firmwares suggested to use.
Click to expand...
Click to collapse
So you did the OTA update to 4.3?
I've been where you are lots of times....
Try post #2 from here
http://forum.xda-developers.com/showthread.php?t=2618447
dicksteele said:
So you did the OTA update to 4.3?
I've been where you are lots of times....
Try post #2 from here
http://forum.xda-developers.com/showthread.php?t=2618447
Click to expand...
Click to collapse
yes it updated and installed but after it installed and rebooted its in
a constant boot loop. Is this going to be a simple permanent fix?
ViiRuZ said:
yes it updated and installed but after it installed and rebooted its in
a constant boot loop. Is this going to be a simple permanent fix?
Click to expand...
Click to collapse
Yes
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
dicksteele said:
So you did the OTA update to 4.3?
I've been where you are lots of times....
Try post #2 from here
http://forum.xda-developers.com/showthread.php?t=2618447
Click to expand...
Click to collapse
Thank you for your help, i honestly do thank you. Its good that people like you are out there and are helpful enough to guides us (the ones who mess up)
ViiRuZ said:
Thank you for your help, i honestly do thank you. Its good that people like you are out there and are helpful enough to guides us (the ones who mess up)
Click to expand...
Click to collapse
Not a problem. Just giving back from all the help I've received over the years,
I searched but seems like everyone else has a slightly different situation than I do and I don't want to screw my phone up any more.
I picked up a Galaxy S5 and wanted to give my Galaxy S3 to my mom.
(This next process happened almost a month ago, so I forgot many of the useful details, I'm really sorry about that)
I don't remember which ROM I was running, I'm fairly certain it was CM10 that hasn't been updated in almost a year. I ended up rebooting and flashing a stock rom that I had backed up on my computer. I flashed it and I got a weird message. The phone wouldn't boot to the ROM and kept going to the home screen. I tried a different stock ROM that I got online, got the same issue, so I tried another source's stock ROM. I got a weird error, phone shut down, and wouldn't power back up.
It would vibrate once when I held the power button, but it didn't do ANYTHING else. I tried doing the power+volume down trick, vibrated twice, did nothing more than that. I got fed up, took the battery out and the memory card, and let it sit in a drawer.
At this moment the only thing the phone does is a short vibration when I do either the power button or power button + volume down.
Today I decided to try to recover it and saw something about a USB Jig I can buy on eBay that may help.
Is this something that may work or is my phone permanently bricked? If the Jig does work, where should I get the stock ROM for this phone, and if it matters, how do I know which stock ROM to install?
It's an AT&T Galaxy S3 16gb model.
here is a thread for stock ROMs.
do you know your bootloader and baseband version?
http://forum.xda-developers.com/showthread.php?t=2939781
"all i can really do , is stay out of my own way and let the will of heaven be done"
mrrocketdog said:
here is a thread for stock ROMs.
do you know your bootloader and baseband version?
http://forum.xda-developers.com/showthread.php?t=2939781
"all i can really do , is stay out of my own way and let the will of heaven be done"
Click to expand...
Click to collapse
I don't know any of that.
Also what's the difference between MJ2, LK3, LG1, and LEM?
Sounds like you flashed an incorrect ROM and/or bootloader onto your phone.
The bootloader is important because if you have the mjb and newer bootloader, flashing an older bootloader will brick the phone.
audit13 said:
Sounds like you flashed an incorrect ROM and/or bootloader onto your phone.
The bootloader is important because if you have the mjb and newer bootloader, flashing an older bootloader will brick the phone.
Click to expand...
Click to collapse
I can see me flashing the wrong rom, but is the bootloader attached to the rom package?
If the bootloader is ****ed, will the jig work for me or am I out of luck?
Where did you get the last ROM you flashed? Provide a link if you can.
Have a look at the debrick thread as it may be helpful if your phone can't get into download mode. The jig may or may not help but it's good to have one for Samsung phones.
audit13 said:
Where did you get the last ROM you flashed? Provide a link if you can.
Have a look at the debrick thread as it may be helpful if your phone can't get into download mode. The jig may or may not help but it's good to have one for Samsung phones.
Click to expand...
Click to collapse
I honestly have no clue, the only rom I could find in my downloads folder on my computer that I can't identify as a custom rom is "pac_d2lte", and I remember the d2lte part throwing me off even though thats what a few sites said to download.
The Jig worked, btw, I'm at the download screen with the phone plugged into my pc, should my PC be showing it as an external device? Cause it doesn't show it in "My Computer".
Can I just take an SGH-I747 rom off this page and flash it with ODIN?
http://forum.xda-developers.com/showthread.php?p=33570269#post33570269
I would not flash any stock rom until you know the bootloader version on your phone.
Since you can get into download mode, flash philz touch recovery for the d2lte and flash a custom rom such as cm11 onto your phone to at least get it booted so you can confirm the bootloader and baseband.
netchemica said:
Can I just take an SGH-I747 rom off this page and flash it with ODIN?
http://forum.xda-developers.com/showthread.php?p=33570269#post33570269
Click to expand...
Click to collapse
I actually just did just that. It seemed to restore my phone to working condition. It seemed a little buggy during set up, but I don't know if it's because I was running it without a sim card or not. So far it looks like it's running just fine.
In other words, this is what I did (in case someone has the same problem and stumbles across this thread):
Purchased a Samsung Galaxy Jig from Amazon
Downloaded one of the LK3 ROMs from this thread
Downloaded Odin 307
Connected the Jig to my phone to allow it to boot to download mode
Once in download mode I unplugged the Jig and plugged the phone into my PC
I launched Odin and it found my phone right off the bat.
With the settings "Auto Reboot", "F. Reset Time", and "PDA" checked, I clicked on PDA and selected the ROM I just downloaded.
I clicked start, Odin did its magic, and my phone rebooted to the setup screen
audit13 said:
I would not flash any stock rom until you know the bootloader version on your phone.
Since you can get into download mode, flash philz touch recovery for the d2lte and flash a custom rom such as cm11 onto your phone to at least get it booted so you can confirm the bootloader and baseband.
Click to expand...
Click to collapse
I didn't see your post before I flashed. I took a gamble and it seems to have worked.
Hi, I'm kinda new to rooting android phone.I just got a galaxy s6 edge from tmobile and I would lIke to root the phone. Searching around the forum but still doesn't ubderstand how's it work. So I got a galaxy s6 edge, baseband version G95TUVU3DOI1, come with 5.1.1 SMG 925T. Question is if I'm root the phone will i able to restore back to stock firmware, will tmobile able to find out if I rooted or not? Because I'm in Jump! Program and plan to switch new phone next year. And its there any easy step by step guide to root the phone. I don't really care about Samsung pay, would like to have fingerprint sensor if possible. Thank you
Before you do anything, understand that you WILL TRIP KNOX AND BREAK SAMSUNG PAY. Also, it is your choice to modify your device and this process seems to work differently for differnt people, so if anything happens, it's on you. However, there are several threads here that can help you if anything goes wrong
Okay, make a backup of all your stuff on SmartSwitch
You're going to want to download ODIN 3.10.7 from here: http://forum.xda-developers.com/showthread.php?t=2711451
Then you're going to want to download UniKernel v8 from here: http://forum.xda-developers.com/gal...d-development/kernel-stockmod-kernel-t3100395
Open ODIN on your computer and don't touch anything yet
Then you're going to put your phone into download mode by turning it off, then holding POWER+VOL DOWN+HOME until a blue screen appears.
Press VOL UP to enter download mode and connect your phone to your computer with the cable that came with your phone
Wait for the little box at the top left to turn blue
On ODIN, click the AP button and locate the UniKernel v8 file that you downloaded before
Once you've found it, double click it to fill in the AP field with the file
Click START and do not touch anything until it's done.
Your phone will restart and once it comes back up, you'll be rooted. It can take several minutes for it to fully boot, so give it time.
Now, this is optional, but if you want a custom recovery to flash custom ROMS, download TWRP onto your computer from here: http://forum.xda-developers.com/tmo...recovery-twrp2-8-6-0-g925t-5-1-1-of6-t3143002
Flash that file through ODIN using the same process as you used to flash UniKernel.
This recovery will let flash custom ROMs. I recommend XstreStoLite as it is very good on battery life, but you will not be able to use WiFi calling or VOLTE. You can download it here: http://forum.xda-developers.com/gal...xtrestolite-deodexed-mod-edition-1-3-t3119968
Let me know how it goes.
Can I unroot in the future if I want to go back to stock?
Osui818 said:
Can I unroot in the future if I want to go back to stock?
Click to expand...
Click to collapse
Yes. You'll just have to download the latest firmware from here or Sammobile.com and flash it using ODIN
Thank you. One last question, any chance using Odin will brick the device?
Osui818 said:
Thank you. One last question, any chance using OdinYes there will brick the device?
Click to expand...
Click to collapse
Yes. There is a small chance, but the method I described is the exact same method I used on my device and I've had no issues. Even if you do, there is almost a 0% chance of a hard brick unless you touch something you're not supposed to touch, and if you do soft brick, there are a few threads here that should be able to help. More than likely flashing stock firmware will fix any problems you have.
thanks akw for the run through, I've been away from android for 4 months and ran back to it. just got this phone and wanna quickly root it.
eruscool said:
thanks akw for the run through, I've been away from android for 4 months and ran back to it. just got this phone and wanna quickly root it.
Click to expand...
Click to collapse
No problem, buddy. Hope it goes well for you.
Akw6190 said:
No problem, buddy. Hope it goes well for you.
Click to expand...
Click to collapse
i need help too. i am trying to use smart switch as my last resort but its not working(ish). after installing the factory firmware it says the device will restart, unplug and plug it again. on the phone it reset itself and then with the green android logo saying installing system then 1/3 of the loading bar it just says erasing then blacked out then back on bootloop. i can still boot to recovery mode and download mode.
godefroy28 said:
i need help too. i am trying to use smart switch as my last resort but its not working(ish). after installing the factory firmware it says the device will restart, unplug and plug it again. on the phone it reset itself and then with the green android logo saying installing system then 1/3 of the loading bar it just says erasing then blacked out then back on bootloop. i can still boot to recovery mode and download mode.
Click to expand...
Click to collapse
Where are you getting the firmware from? What version of ODIN are you using? What port are you using in ODIN to flash the firmware?
There is a Mega download of the DOI1 firmware somewhere around here. I recommend downloading that and flashing using the AP port in ODIN 3.10.7, using the cable that came with your phone. This is the exact method I used to return to stock with no issues.
Hello,
I havent been here since my s7 edge, but im in need of some help. I did a update today on my stock sprint S9 and it was updating and got stuck at 35%. Okay cool, so just go into bootloader and factory reset right? No, I boot into the bootloader than it automatically loops back to " system install update" and starts the progressing update and gets stuck again or somehow, it loops into the "power by android logo" if that makes sense..
I'm not sure how to get my phone to work again, but im asking for your assistance. Havent updated or root my s9, so I currently have no idea of rooting or anything here. Also, its not possible to enter developer mode since the phone does not fully boot, but loop. Is it possible to get the phone to fully boot again w/o any rooting, etc? Its been awhile lol.
Thank you for your time, Tuan.
tuan971803 said:
Hello,
I havent been here since my s7 edge, but im in need of some help. I did a update today on my stock sprint S9 and it was updating and got stuck at 35%. Okay cool, so just go into bootloader and factory reset right? No, I boot into the bootloader than it automatically loops back to " system install update" and starts the progressing update and gets stuck again or somehow, it loops into the "power by android logo" if that makes sense..
I'm not sure how to get my phone to work again, but im asking for your assistance. Havent updated or root my s9, so I currently have no idea of rooting or anything here. Also, its not possible to enter developer mode since the phone does not fully boot, but loop. Is it possible to get the phone to fully boot again w/o any rooting, etc? Its been awhile lol.
Thank you for your time, Tuan.
Click to expand...
Click to collapse
See if you're able to get into download mode and Odin the latest CSAB firmware: https://drive.google.com/file/d/1huOYnY6_7Rpjlj-8lDAo68lOJ-_usULs/view
This link comes from this thread: https://forum.xda-developers.com/galaxy-s9/how-to/official-s9-pie-t3844616
How long did you wait for it when it was stuck?
Grab the latest firmware from the samfirm tool here on XDA (Or link above will be quicker)
Boot the phone into Download Mode "Volume Down & Bixby & Power" from a powered off state
Load the 4 sections of firmware into Odin 3.13.1 (Use CSC not HOME_CSC)
Connect phone to PC USB
Hit start and wait for it to complete
All being well it should reboot the phone into Android
DildoMaster said:
See if you're able to get into download mode and Odin the latest CSAB firmware: https://drive.google.com/file/d/1huOYnY6_7Rpjlj-8lDAo68lOJ-_usULs/view
This link comes from this thread: https://forum.xda-developers.com/galaxy-s9/how-to/official-s9-pie-t3844616
Click to expand...
Click to collapse
I'm able to get into download mode yes. Do I need to be rooted or anything to flash the odin?
*Detection* said:
How long did you wait for it when it was stuck?
Grab the latest firmware from the samfirm tool here on XDA (Or link above will be quicker)
Boot the phone into Download Mode "Volume Down & Bixby & Power" from a powered off state
Load the 4 sections of firmware into Odin 3.13.1 (Use CSC not HOME_CSC)
Connect phone to PC USB
Hit start and wait for it to complete
All being well it should reboot the phone into Android
Click to expand...
Click to collapse
Waited about 30minutes when it was installing the "system update" and it loop for hrs until the phone died. When trying to get into bootloader it loops the system install and updates something instead of going to bootloader.
Phone is up and running. Thank you both so so much, you do not know how much I appreciate the help getting my phone back and running.
Thank you again, Tuan.
tuan971803 said:
Phone is up and running. Thank you both so so much, you do not know how much I appreciate the help getting my phone back and running.
Thank you again, Tuan.
Click to expand...
Click to collapse
No problem! Were you able to eventually Odin flash the CSAB firmware?
DildoMaster said:
No problem! Were you able to eventually Odin flash the CSAB firmware?
Click to expand...
Click to collapse
Yes,
I was able to flash the firmware with the link you provided and it worked perfectly. Thank you again, wouldnt know what to do still if it wasnt for both of you.
tuan971803 said:
Phone is up and running. Thank you both so so much, you do not know how much I appreciate the help getting my phone back and running.
Thank you again, Tuan.
Click to expand...
Click to collapse
:good:
tuan971803 said:
Yes,
I was able to flash the firmware with the link you provided and it worked perfectly. Thank you again, wouldnt know what to do still if it wasnt for both of you.
Click to expand...
Click to collapse
Awesome, glad it worked!