Please ALL help me. my n7100 not boot - Galaxy Note II Q&A, Help & Troubleshooting

Please help me. I have the situation, phone will not turn on , it stays on the Samsung.
I can go to Philz Recovery mode. I am doing a full vipe, instal zip.
I also Odin mode
AP_N7100XXUEMK4J9.tar.md5
ModemCP_N7100DDEMJ9.tar.md5
CSC_N7100XAEM16.tar.md5
it stays on the write SAMSUNG.
It has been 5 days and could not do
boot loader mode Written:
KNOX WARRANTY VOID:1
AP SWREV: A2
:crying::crying::crying::crying:
I've looked and do very much. But nothing helped
I just hope for your help

Related

Note 2 stuck in boot screen ...pls help

Hi there,
i had CM 10.3 on my n7100 installed. After the display was broken and a repair service fixed it, they removed everything back to stock and installed the newest firmware with knox. So i tried to remove knox and root again, but after many hours of try and failure with many tutorials and forum posts im out of ideas.
The note 2 is stuck in the first boot screen. I tried to flash cwm in odin in different versions, everytime its stuck in the boot sceen. Same with stock rom.
Emergency repair in kies ends with error. The only thing i still can is to enter download mode.
Please help me. :crying:

Note 2 Bricked - can't unbrick

Hi Guys
My note 2 GT-7100 won't turn on anymore as soon as I turn it on I get the screen with "Firmware upgrade encountered an issue. Please select recovery mode in Kies $ try again.
I got this after I was trying to install the latest firmware on my note 2. The file I firmware I downloaded is N7100XXUEMK9_N7100OXXEMK4_OXX
I tried to reinstall it with Odin but it always gives me an error then I did some search online and tried with Kies as well but when it gets to the update it tell me that I can't do the update.
What should I do?
If I go on download mode the screen has written this :
ODIN MODE
PRODUCT NAME : GT-N7100
CUSTOM BINARY DOWNLOAD : YES (5 COUNTS)
CURRENT BINARY : SAMSUNG OFFICIAL
SYSTEM STATUS : CUSTOM
KNOX WARRANTY VOID : 0
RP SWREV : A2
What should I do to unbrick it?
Thanks
americo85 said:
Hi Guys
My note 2 GT-7100 won't turn on anymore as soon as I turn it on I get the screen with "Firmware upgrade encountered an issue. Please select recovery mode in Kies $ try again.
I got this after I was trying to install the latest firmware on my note 2. The file I firmware I downloaded is N7100XXUEMK9_N7100OXXEMK4_OXX
I tried to reinstall it with Odin but it always gives me an error then I did some search online and tried with Kies as well but when it gets to the update it tell me that I can't do the update.
What should I do?
If I go on download mode the screen has written this :
ODIN MODE
PRODUCT NAME : GT-N7100
CUSTOM BINARY DOWNLOAD : YES (5 COUNTS)
CURRENT BINARY : SAMSUNG OFFICIAL
SYSTEM STATUS : CUSTOM
KNOX WARRANTY VOID : 0
RP SWREV : A2
What should I do to unbrick it?
Thanks
Click to expand...
Click to collapse
Ru using original samsung cable that came with note 2 r else some other cable??
Its vwry hard to really brick a phone now days especial the way you telling, ser if you have a friend that understand what is doing better then you and will work again....dont take me bad ....
First of all change USB port if still don't work then change pc

Gt i9082 stuck in bootloop/cannot boot into stock recovery

Guys sorry for posting this here but I'm really desperate and I need your help. I flashed 4.2.2 firmware on GT i9082 and I forgot to check the "F reset " button on Odin.The firmware flashed to completion and I saw the"pass" message. However the phone cannot boot now and the Samsung logo goes on and off when I try to boot the phone. When I boot into download mode it shows something like this "current eMMc version !!!!!!!!" in red color. I tried flashing the same firmware via Odin but it fails and says "no pit partition".The firmware is a single md5.I'm unable to enter into recovery mode either so I cannot perform a hard reset. Is the phone hard bricked? Please help I'm really desperate. Thanks
umaga2012 said:
Guys sorry for posting this here but I'm really desperate and I need your help. I flashed 4.2.2 firmware on GT i9082 and I forgot to check the "F reset " button on Odin.The firmware flashed to completion and I saw the"pass" message. However the phone cannot boot now and the Samsung logo goes on and off when I try to boot the phone. When I boot into download mode it shows something like this "current eMMc version !!!!!!!!" in red color. I tried flashing the same firmware via Odin but it fails and says "no pit partition".The firmware is a single md5.I'm unable to enter into recovery mode either so I cannot perform a hard reset. Is the phone hard bricked? Please help I'm really desperate. Thanks
Click to expand...
Click to collapse
did you put the .pit file?
I flashed a file with a single package through PDA
Sent from my GT-I8190 using XDA Free mobile app

Bootloop help

Hi, my sister's GT-I9195 got bricked suddenly some days after she OTA upgraded to 4.4.2. As I live in another city, she left the phone thinking it was dead for months.
I noticed it could enter download mode and left it charging then tried every alternative method I found through Odin by flashing different firmwares, and the unbricking guide for BL v1. All of them ended in bootloop, even if I flash a recovery tool like Philz Touch it does not enter the recovery I've just installed, it shows a blue message on top of screen and bootloop again.
I know it is bootloader ap swrev: 2, then I can only flash firmwares with v2 bootloader, but the one recommended is UBUBNE2, and this one has not get me out of bootloop to. The phone is still Knox 0x0 but I don't know if it may help in the question.
If anyone has a light over this I would be very grateful cause I'm stuck now.
vitor6496 said:
Hi, my sister's GT-I9195 got bricked suddenly some days after she OTA upgraded to 4.4.2. As I live in another city, she left the phone thinking it was dead for months.
I noticed it could enter download mode and left it charging then tried every alternative method I found through Odin by flashing different firmwares, and the unbricking guide for BL v1. All of them ended in bootloop, even if I flash a recovery tool like Philz Touch it does not enter the recovery I've just installed, it shows a blue message on top of screen and bootloop again.
I know it is bootloader ap swrev: 2, then I can only flash firmwares with v2 bootloader, but the one recommended is UBUBNE2, and this one has not get me out of bootloop to. The phone is still Knox 0x0 but I don't know if it may help in the question.
If anyone has a light over this I would be very grateful cause I'm stuck now.
Click to expand...
Click to collapse
Hi all, I think have the some problem.
Tried flash several Roms and recovery images (CWN) but the phone stills bootloop.
With ODIN flash dive succes or pass message but same issue after reboot .
When enter in downloading mode i get some information..... "WRITE POTECTION:ENABLED" ,how can i disable this protection ?
AV and firewall disabled.
Any ideas ?

Need some serious help with frp lock

Hi! My Note 7 n930f stuck after I switched off. It always says "custom binary blocked by frp lock". So it wont boot ir wont let me into twrp and so. P. S. Phone is rooted. I have tryied so many tricks to solve this problem. But nothing happens. Even odin wont help me with rescue firmware... It stucks and also writes about frp lock. When I start the update it stops at system.img.ext4 and in phone download screen appears "custom binary(boot) blocked by frp lock...
Please help. If someone will help me I will give 50$$$!!!!!!
mantasakys said:
Hi! My Note 7 n930f stuck after I switched off. It always says "custom binary blocked by frp lock". So it wont boot ir wont let me into twrp and so. P. S. Phone is rooted. I have tryied so many tricks to solve this problem. But nothing happens. Even odin wont help me with rescue firmware... It stucks and also writes about frp lock. When I start the update it stops at system.img.ext4 and in phone download screen appears "custom binary(boot) blocked by frp lock...
Please help. If someone will help me I will give 50$$$!!!!!!
Click to expand...
Click to collapse
Seems you forgot to set the OEM unlock switch to 'on' or tampered with in any way.
The only way to get your phone back working is to flash an original stock rom.
Which one is working depends on the original frimware level you had before (exact firmware code needed), since you can't downgrade to an earlier baseband level.
Please post this information and let me look if I have a matching fimware for you.
If so, I can upload to your cloud storage like google drive etc.
Hello, I also have similar problem with note 7 sn930fd running note fe rom. I switched oem unlock off to test magisk and forgot to turn back on. Frp issue on restarting the phone. Now it can only boot to download mode. I attempted Odin with official firmware but failed. I got Sw Rev check fail device 3 binary 1. I am assuming that's because it's not the correct firmware? If so what's the correct firmware to download?
thanks
John
Thank you all. Problem resolved
mantasakys said:
Hi! My Note 7 n930f stuck after I switched off. It always says "custom binary blocked by frp lock". So it wont boot ir wont let me into twrp and so. P. S. Phone is rooted. I have tryied so many tricks to solve this problem. But nothing happens. Even odin wont help me with rescue firmware... It stucks and also writes about frp lock. When I start the update it stops at system.img.ext4 and in phone download screen appears "custom binary(boot) blocked by frp lock...
Please help. If someone will help me I will give 50$$$!!!!!!
Click to expand...
Click to collapse
you find the correct firmware here in this page or look for the same firmware posted elswhere. when you flashed send me 50$.
https://forum.xda-developers.com/note-7/help/n930fxxu3bpl2-t3520988/page2

Categories

Resources