Develop Bugs

Help...No Mass Storage Option In ICS Engineer Mod...

Plz Help
I Just Got An Optimus Lte Lu6200
it was having problem that it was not Showing USB Storage When I Connect and Chose "USB Storage"
Also USB Debugging not working,Although I Enable it and connected it via LG Software
Now I Flashed ICS Engineer Mode using Download Mode,Still No Mass Storage Working ,Debugging Shows Enabled but Not Actually
I Tried
Uninstalling and Reinstalling Drivers
Checked on another Computer
No USE
Plz help Me...Appreciated

Maybe It's your phone.
yawxir said:
Plz Help
I Just Got An Optimus Lte Lu6200
it was having problem that it was not Showing USB Storage When I Connect and Chose "USB Storage"
Also USB Debugging not working,Although I Enable it and connected it via LG Software
Now I Flashed ICS Engineer Mode using Download Mode,Still No Mass Storage Working ,Debugging Shows Enabled but Not Actually
I Tried
Uninstalling and Reinstalling Drivers
Checked on another Computer
No USE
Plz help Me...Appreciated
Click to expand...
Click to collapse
Maybe your phone was damage. Did you recently bought that phone? If yes, then the concern maybe is the device itself.
But try install the latest driver for LU6200 [Make sure to download it in LG Mobile Korea] and maybe it would help. Make sure the computer is detecting your phone as you connect it.
Hope this will help you.

mac20dnangel said:
Maybe your phone was damage. Did you recently bought that phone? If yes, then the concern maybe is the device itself.
But try install the latest driver for LU6200 [Make sure to download it in LG Mobile Korea] and maybe it would help. Make sure the computer is detecting your phone as you connect it.
Hope this will help you.
Click to expand...
Click to collapse
Yes Its Not Only Detecting but i Also Put my Phone On Download Mode (Pressing Power+Vol Down) and Flashed Successfully Engineer ICS KDZ File ,The Whole Process Was Done with No Error
But Still Same Mass Storage Problem.........

mass storage is disabled in ics engineer version.
you can try to enable it with adb: "adb shell /system/bin/sdutil ums enable"
or if it doesnt work, use an android software manager like mobilego to access your mass storage.

Thnksss But.....
devcon69 said:
mass storage is disabled in ics engineer version.
you can try to enable it with adb: "adb shell /system/bin/sdutil ums enable"
or if it doesnt work, use an android software manager like mobilego to access your mass storage.
Click to expand...
Click to collapse
Really Thankful to you for reply
But Whats About Debugging Not Working?
Also Its your Suggestion Possible Without Root?As USB Debugging is not working and im unable to Root

[Q] [Help] cant connect to PC, MTP problem

hello fellow users need some help
everytime i connect my Gpad through USB it fails to install MTP and so i cant "see" my tablet on Windows Explorer
my tablet is rooted if that helps in anyway
Thanks

Was curious if you ever found a fix for this. My tablet will not show up on the pc to copy files back and forth need a fix

shawn13165 said:
Was curious if you ever found a fix for this. My tablet will not show up on the pc to copy files back and forth need a fix
Click to expand...
Click to collapse
Have you enabled USB debugging in developer options? (to see developer options, click on "build" under settings several times until it appears.)

sleekmason said:
Have you enabled USB debugging in developer options? (to see developer options, click on "build" under settings several times until it appears.)
Click to expand...
Click to collapse
yes, tried that. tried different USB cables, installing/reinstalling usb drivers. I copy shows and things to my tablet to watch and It used to work, but it hasnt in some time and it kinda sucks having to power off tablet and pull sd card out to copy to it. Just getting frustrated with it. I even reset the device and updated it to android 5

Running through options, sounds like the computer. Can you hook up your phone?

Yea, phone shows up ok and just for the hell of it plugged tablet into laptop and it came up fine so i guess i have to figure out what is wrong with my desktop

Lost transfer via USB

When I plug in my USB cable, it only charges, it no loner allows me to transfer files to my Desktop/Laptop. Nothing shows up on my computer.
When I start my LG PC software it never connects.
How can I set it so when my USB cable is plugged it allows me to transfer files and browse the drive.
I have looked everywhere and the options given does not work on this phone. Is there a setting I may have accidentally disabled??

have you ever connect via USB successful
duckfart said:
When I plug in my USB cable, it only charges, it no loner allows me to transfer files to my Desktop/Laptop. Nothing shows up on my computer.
When I start my LG PC software it never connects.
How can I set it so when my USB cable is plugged it allows me to transfer files and browse the drive.
I have looked everywhere and the options given does not work on this phone. Is there a setting I may have accidentally disabled??
Click to expand...
Click to collapse
Have you ever connect via USB successful?
Remove all LG Software, TOOLS, USB Drivers, and Install latest LG USB driver 3.11
Go device manager to check if all LG device is installed properly, You should find mtp device in the device manager.

asialove2013 said:
Have you ever connect via USB successful?
Remove all LG Software, TOOLS, USB Drivers, and Install latest LG USB driver 3.11
Go device manager to check if all LG device is installed properly, You should find mtp device in the device manager.
Click to expand...
Click to collapse
yes.
everything was going well until today.
nothing worked, I ended up de -rooting and going back to stock to fix it.

Thanks
duckfart said:
yes.
everything was going well until today.
nothing worked, I ended up de -rooting and going back to stock to fix it.
Click to expand...
Click to collapse
Thanks for your information.
Unroot and back to stock do fix the issues?

duckfart said:
yes.
everything was going well until today.
nothing worked, I ended up de -rooting and going back to stock to fix it.
Click to expand...
Click to collapse
How did u go back to stock if u couldnt connect through usb i have the same problem thanx for any help i was able to load a different rom that i had on my flash card thats all bust still no luck

someone help please id like to go back to stock any rom I install I cannot connect through use just charge

I've had this happen on my old phone occasionally, and found I had to turn the phone completely off (not just reboot) and back on to get the computer to recognize the phone again.

I can power off, take out battery, flash new rom ,factory reset ,wipe cache ,dalvic everything and no matter what computer I connect it to it just charges its not a matter of having driver its like the computer doesn't even know I plugged something in. happened after I flashed I think it was dragon rom not even sure or maybe after I updated the ota while rooted or is it you cant ota with cwm/twrp installed

lost transfer via usb
can you tellme what you have done to be able to flash a new rom without having the ability to transfer files via usb thanx still haven't figured anything out. just saw a post about it being enable through the kernel can anyone help with this

[Q] USB connection to PC charges only?

I have a new G3 through T-MO. It is completely stock. I cannot get my PC (Windows 7) to recognize it as a drive, I have installed the latest drivers manually. Is there a setting on the phone that I can't find? This is killing me! I don't want to install the LG bloatware to manage files, I don't need that.
Any help would be greatly appreciated.
Thank you

Did you figure this out? Enable the Developer Options yet?

Bumpredd said:
I have a new G3 through T-MO. It is completely stock. I cannot get my PC (Windows 7) to recognize it as a drive, I have installed the latest drivers manually. Is there a setting on the phone that I can't find? This is killing me! I don't want to install the LG bloatware to manage files, I don't need that.
Any help would be greatly appreciated.
Thank you
Click to expand...
Click to collapse
-Do you get a USB connection notification on your task bar at all? You absolutely should. If you do, swipe down, select it, and make sure MTP is selected
-Are you using the cable that came with the phone?
-Have you tried a different USB port? Different PC?
-Make sure you have a good cable first. Once that is a known good cable that possibility can be ruled out. Even if the cable is brand new, it can still be a bad cable...
-Try removing your USB host drivers in device manager, and rebooting. Sometimes they just need to be refreshed. Don't worry... You mouse and keyboard may stop working during this. The reboot reinstalls them, so don't sweat it.
-Run an error check on your PC's hard drive. (Right click your primary drive > properties > tools tab > check now > leave the settings alone > click ok > confirm scheduled check > reboot)
Please update with your results

A solution
I had this problem and the solution that worked for me in Windows 7 was to uninstall all LG drivers, restart the computer, connect phone and allow Windows to auto install its drivers.

LG G Pad 8.3 File recover

I've got an LG G Pad 8.3 and I deleted all my files with recovery (stock) by accident. And I didn't made a save from them. I want to recover my files, but I can't do this because it can connect to PC only by MTP and If I wanted to root it via adb, adb said my device is offline. Can anyone help me in this problem?

rektilian said:
I've got an LG G Pad 8.3 and I deleted all my files with recovery (stock) by accident. And I didn't made a save from them. I want to recover my files, but I can't do this because it can connect to PC only by MTP and If I wanted to root it via adb, adb said my device is offline. Can anyone help me in this problem?
Click to expand...
Click to collapse
You mean you Factory Reset so that your internal storage were wiped, right?
There's probably some Android apps available to undelete files, but I have no experience doing so. You have USB Debugging enabled? Also, some LG devices have a solvable "bug" (at least after rooting) that after every reboot, USB Debugging is turned back off. If yours has that problem, the way to fix it is to turn USB Debugging on, hook the device up to the PC, change it to PTP mode, then back to MTP, then disconnect. From now on it should be good again until certain circumstances cause it to start happening such as after flashing a KDZ or TOT and then re-rooting.
Once USB Debugging and you try to access the device via ADB, you'll have to confirm the ADB authorization dialog on the device. Select the checkbox to remember the authorization.

Thank you
roirraW "edor" ehT said:
You mean you Factory Reset so that your internal storage were wiped, right?
There's probably some Android apps available to undelete files, but I have no experience doing so. You have USB Debugging enabled? Also, some LG devices have a solvable "bug" (at least after rooting) that after every reboot, USB Debugging is turned back off. If yours has that problem, the way to fix it is to turn USB Debugging on, hook the device up to the PC, change it to PTP mode, then back to MTP, then disconnect. From now on it should be good again until certain circumstances cause it to start happening such as after flashing a KDZ or TOT and then re-rooting.
Once USB Debugging and you try to access the device via ADB, you'll have to confirm the ADB authorization dialog on the device. Select the checkbox to remember the authorization.
Click to expand...
Click to collapse
Thank you. If i have time i will try it.

Doesn't works
roirraW "edor" ehT said:
You mean you Factory Reset so that your internal storage were wiped, right?
There's probably some Android apps available to undelete files, but I have no experience doing so. You have USB Debugging enabled? Also, some LG devices have a solvable "bug" (at least after rooting) that after every reboot, USB Debugging is turned back off. If yours has that problem, the way to fix it is to turn USB Debugging on, hook the device up to the PC, change it to PTP mode, then back to MTP, then disconnect. From now on it should be good again until certain circumstances cause it to start happening such as after flashing a KDZ or TOT and then re-rooting.
Once USB Debugging and you try to access the device via ADB, you'll have to confirm the ADB authorization dialog on the device. Select the checkbox to remember the authorization.
Click to expand...
Click to collapse
It doesn't works. adb still sais offline.

rektilian said:
It doesn't works. adb still sais offline.
Click to expand...
Click to collapse
No idea what else to suggest. I'd probably have to be there and fool with it myself to get any ideas.
Did you look for any undelete apps in the Play Store?