Related
Hi there! First of all I don't speak english very well.
My Galaxy Nexus hard bricked yesterday.
tl;dr no boot animation, no recovery mode, no download mode, no response from computer.
I thought it had just a low battery level, I found it turned off. So I tried to recharge it but it gave no signals, no battery icon, nothing.
After an all night long recharge I tried to turn it on, to enter in download mode or in recovery mode but nothing works. I also tried to connect it with my computer with and without battery, no response, no "OMAP" device found, no sound from Windows for plugging it in, nothing.
I found this thread here in xda, many people has been redirected to it and found their solution to the brick problem.
I tried to follow all the steps but when I plug in the phone and start the .bat file nothing happens, just stuck on "Waiting for device".
The phone is unlocked and rooted. I'm running AOKP JB-MR1 Build 2 and Franco Kernel for a month, never had problems with them, never installed other ROMs after that.
What should I do now? Should I try to do something or just bring it to a support center? The phone is still in warranty, there would be any problem because it has a non-stock ROM?
I've red about a jig to force the Odin mode, should I buy it? (I found this one)
Thanks for the help.
Have you tried booting into Odin mode
ntb81 said:
Have you tried booting into Odin mode
Click to expand...
Click to collapse
Yes, it doesn't work.
have you your warranty on it?
return it and get a new one
It's hard bricked and a JTAG unit may force it into download mode, if you send it in for warranty, chances are it won't be accepted as it was obviously tampered with and they would find out that your bootloader is unlocked and charge you more money than the device is actually worth to fix it.
I don't understand how it could of bricked if nothing has changed on the phone for a month or longer. Nothing was flashed recently so how can you hard brick the phone?
Beauenheim said:
It's hard bricked and a JTAG unit may force it into download mode, if you send it in for warranty, chances are it won't be accepted as it was obviously tampered with and they would find out that your bootloader is unlocked and charge you more money than the device is actually worth to fix it.
Click to expand...
Click to collapse
Yeah, that's why I'm not sure to send it in for warranty. So have I to try with a JTAG first?
[bman123] said:
I don't understand how it could of bricked if nothing has changed on the phone for a month or longer. Nothing was flashed recently so how can you hard brick the phone?
Click to expand...
Click to collapse
I'm not understanding that too, I don't know what happened. Suddendly it stopped working. Maybe is just a battery problem, I'll try to use another one before bringing it to the shop where I bought it.
same happened to me, but I have an untouched phone with stock android. it worked well for over an year until today.
I see a lot of people having same issue, but they say that when connected to PC over USB the phone is recognized as OMAP.
for me the PC doesn't do anything...
any help? thanks
---------- Post added at 06:12 AM ---------- Previous post was at 06:02 AM ----------
galiganu said:
same happened to me, but I have an untouched phone with stock android. it worked well for over an year until today.
I see a lot of people having same issue, but they say that when connected to PC over USB the phone is recognized as OMAP.
for me the PC doesn't do anything...
any help? thanks
Click to expand...
Click to collapse
so right after I wrote that I plugged my phone into USB of my PC without battery. when I inserted the battery it started showing me the battery sign and I could started the phone. 3 minutes later it went black again, but the trick didnt work again.
any ideas? thanks
Try This !!
Arrange a 4 ohm resistor and try to attach it in ur usb plug port of phone ..it 'll force the phon eto go in download mode or say Fastboot mode.
then follow a tutorial to flash any rom..
its quite easy else ping me !!
Tech.Nik said:
Arrange a 4 ohm resistor and try to attach it in ur usb plug port of phone ..it 'll force the phon eto go in download mode or say Fastboot mode.
then follow a tutorial to flash any rom..
its quite easy else ping me !!
Click to expand...
Click to collapse
Please could you explain a bit more how to go about this? I have a Verizon Galaxy Nexus in a somewhat similar condition. This one is recognised as an OMAP 4430 device. I downloaded OMAP Flasher, installed drivers and tried to bring it back to life but after running the batch file I get this error: Operation FAILED (Remote: : Driver init error 0x00FF8080 - MMC CONFIG FAILURE). Can the resistor trick work on this and if yes, how can I go about it? I am not faint-hearted; I think I can handle it if given the right instructions.
After I tried everything i could from the internet, I went to a shop and tested to see if the USB is broken - and indeed it was. I replaced the USB component of the phone and after that it started.
Thanks guys
galiganu said:
After I tried everything i could from the internet, I went to a shop and tested to see if the USB is broken - and indeed it was. I replaced the USB component of the phone and after that it started.
Thanks guys
Click to expand...
Click to collapse
Yeah, the faulty USB port is a very common issue.
Dear All,
I have encountered a problem with my note 2 that unfortunately closes a lot of doors for me to fix. I thought about asking you guys and hopefully this has not been asked before. Ok so my problem is that I had rooted phone ages ago and i had SuperSU installed with the root. Later on some official update came out and I let it update. After that I might have lost my root there and then not sure though. When I try to do something in root it won't let me, also it fails when trying to change super user app. What is killing me mostly is that any computer I connect using different cables, won't recognise my phone, as if it was not even connected although it charges normally. At first it was sometimes charging and not, sometimes freezing if connected to the USB. It might be hardware related but I want to try to fix this issue first to be sure. I can't even use Odin since it's not being detected so unrooting and going back to the seller is out of question.
Can anyone help me please? I am thinking of trying custom firmware through sdcard installation but i cant even install CWM and when using official recovery the package is not accepted. (signature issues). There may be some easy workaround I do not know of hence me asking you experienced guys.
Big thanks for reading this and hopefully helping me.
joshua
So you mean odin is not detecting phone in download mode ?
Try connecting the phone and see if adb works but I don't really think it would work. Try another cable. Could be that usb port is damaged.
Try another recovery.
Sent from my GT-N7100
UtkarshGupta said:
So you mean odin is not detecting phone in download mode ?
Try connecting the phone and see if adb works but I don't really think it would work. Try another cable. Could be that usb port is damaged.
Try another recovery.
Sent from my GT-N7100
Click to expand...
Click to collapse
No, Odin is not detecting the phone although it starts charging like normal. I will check adb later tonight when I am on my home pc. I have tried in total 4 different cables same result. I have used 3 different operating systems on different computers, still not detected. Usb port might be damaged but I don't think they will be happy seeing its rooted.(they being the store i bought it from, that is why I have not gone to them yet.
I have a similar issue since 4.1.2 however my phone is recognized by computer and odin in download mode, are you sure you tried it on download mode?
yudodis said:
I have a similar issue since 4.1.2 however my phone is recognized by computer and odin in download mode, are you sure you tried it on download mode?
Click to expand...
Click to collapse
Yes I have tried download mode, that's why this problem is killing me :/ The root access is completely unusable and not working too.
I tried to use a volume fix by changing the values in some system files on my rooted G3, rebooted and got stuck at the LG Bootlogo. Been trying lots of things, finally used this thread: http://forum.xda-developers.com/showthread.php?t=2799647 but the flash tool fails at 14 seconds saying failure to enter download mode. I have a D851C on T-Mobile, it is in download mode when I run the program and no change occurs on the screen save for the text log at the bottom. Upon booting into DL mode, it says USER B94. After unplugging and plugging it back in to start the unroot it changes to USER S0.0 AS0.0 B94 UHS then on the next line S U LG-D851 04.4.2 Hrev_10 and the next D85110c. It takes a good 50 seconds for the flash tool to change from saying awaiting connection, and then at 14 seconds it looks like the photo. The names of the dll and tot I am using are, respectively:
LGD851_20140611_LGFLASHv160
LGD851AT-01-V10c-310-260-JUN-20-2014+0
Yes I have set the port to 41 in device manager.
What the heck is wrong?
Someone please help I was supposed to fly out of state today but now I don't think I can without a phone and I can't afford a new one, I'm a student
Did you put your phone in download mode? It's not broken you just need to successfully flash it. It says download mode failed so here's a simple way to enable it if you ate having trouble. Pull out the battery then hold volume down and put it back it and plug in the cable. This should be done in a relatively fast manner to enable it if you are having issues getting into download mode.
Edit I know you said you put it in DL mode but I had a similar issue with my F400S so its worth a try.
Pilz said:
Did you put your phone in download mode? It's not broken you just need to successfully flash it. It says download mode failed so here's a simple way to enable it if you ate having trouble. Pull out the battery then hold volume down and put it back it and plug in the cable. This should be done in a relatively fast manner to enable it if you are having issues getting into download mode.
Edit I know you said you put it in DL mode but I had a similar issue with my F400S so its worth a try.
Click to expand...
Click to collapse
I tried it, same error at 14 seconds. Tried taking the battery out after the yellow ready button comes up to and doing it that way, nada
Did you try using LG PC Suite --> Tools --> Fix Upgrade Problems?
The steps can have different names (didn't remember the names) but something like that, worked for me when I messed up my system
kvanzuijlen said:
Did you try using LG PC Suite --> Tools --> Fix Upgrade Problems?
The steps can have different names (didn't remember the names) but something like that, worked for me when I messed up my system
Click to expand...
Click to collapse
LG PC Suite didn't recognize it before, does it need to be in download mode when I do that? Or is there another recovery mode?
*EDIT* Just discovered this log, maybe someone's familiar with the codes and has an idea what to do
Bump please help I don't want to use a warranty claim
Bump
DrPhill94 said:
Bump
Click to expand...
Click to collapse
I may have found the solution for another member, but it is untested from me, as I am at work at the moment. In flashtool did you change the action mode? if not try changing the action mode to board dl instead of what its set to. Let me know, because I got the same issue right now.
joeyhdownsouth said:
I may have found the solution for another member, but it is untested from me, as I am at work at the moment. In flashtool did you change the action mode? if not try changing the action mode to board dl instead of what its set to. Let me know, because I got the same issue right now.
Click to expand...
Click to collapse
Tried it a few times, no luck so far. Same error same time
DrPhill94 said:
Tried it a few times, no luck so far. Same error same time
Click to expand...
Click to collapse
damn, I'm on Sprint variant, only thing I haven't tried is lg suite and making sure my Flashtool is the latest version. I've tried everything else last night for 6 hours.
edit: my dl mode is working perfect. I see in your Flashtool, your error is slightly different. mine gets stuck at 93%. Then it reboots back to this
DrPhill94 said:
LG PC Suite didn't recognize it before, does it need to be in download mode when I do that? Or is there another recovery mode?
*EDIT* Just discovered this log, maybe someone's familiar with the codes and has an idea what to do
Click to expand...
Click to collapse
PC Suite won't recognize it if you don't use the correct version. The latest from LG's site is in fact the wrong version. You need the version that's about 223mb in size. Sorry, I'm not sure of the version and am currently busy fixing my phone with it, so can't check. Perhaps someone would kindly supply you with a download link.
Beylie said:
PC Suite won't recognize it if you don't use the correct version. The latest from LG's site is in fact the wrong version. You need the version that's about 223mb in size. Sorry, I'm not sure of the version and am currently busy fixing my phone with it, so can't check. Perhaps someone would kindly supply you with a download link.
Click to expand...
Click to collapse
Will it work even if my phone doesn't show up in explorer? My pc makes a sound when it is plugged in and unplugged in Download Mode but the only thing so far to recognize it is flash tool. If you can check the version please let me know but I'll look for it
Did you try a different USB port on your computer? Drivers get honked up easily using flashing tools and sometimes using a different port, or even a different USB cable can fix your problem. More likely another usb port, but I've also had a bad cable as well.
Ozark_8125 said:
Did you try a different USB port on your computer? Drivers get honked up easily using flashing tools and sometimes using a different port, or even a different USB cable can fix your problem. More likely another usb port, but I've also had a bad cable as well.
Click to expand...
Click to collapse
That's the problem is the only cable that works is the one that came with it, and I've used 3 of my 4 on my laptop, so I doubt it's the port
Ozark_8125 said:
Did you try a different USB port on your computer? Drivers get honked up easily using flashing tools and sometimes using a different port, or even a different USB cable can fix your problem. More likely another usb port, but I've also had a bad cable as well.
Click to expand...
Click to collapse
Also you have to realize the phone doesn't turn on. I get the LG logo, download mode, or factory reset. That's it
If that is the only cable that works - my guess is there's something probably wrong with the micro usb jack on your phone.. it shouldn't be that finicky where only 1 of 4 cables would work. If you do a warranty return, you might get lucky anyways. Several folks have posted on XDA that the stores where they returned phones were either clueless or didn't care about the status of the root code. Of course, YMMV.
Ozark_8125 said:
If that is the only cable that works - my guess is there's something probably wrong with the micro usb jack on your phone.. it shouldn't be that finicky where only 1 of 4 cables would work. If you do a warranty return, you might get lucky anyways. Several folks have posted on XDA that the stores where they returned phones were either clueless or didn't care about the status of the root code. Of course, YMMV.
Click to expand...
Click to collapse
You misunderstand: The cable that comes with the G3 is the only one GUARANTEED to work with these operations. Has nothing to do with the jack. Getting a new one in the mail tomorrow, can't tell if it's rooted if they can't access the filesystem
While I was using SM-N910P 5.1.1 N910PVPU4COG5_Deodexed Rom, I changed SecContacts_Note_USA.apk file and it turned into Hard Brick.
It's a typical Hard Brick Hard Brick symptom in which nothing shows up on a screen even I pressed a power button and there is no vibration on the phone.
If I connect it to a computer, QHSUSB_BULK pops up.
After I setup a driver, it connects to Qualcomm HS-USB QDLoader 9008.
As I was searching for some information, I could find a solution for Note3 Hard Brick.
However,I do not have unbric.img file as it says on the solution.
I need unbric.img file.
Help Me
Can you get into download mode? Vol down+home+power. Seems odd that just changing that apk would brick your device, trust me I swap files in and out all the time but never had that issue.
Could be your battery is dead too
Rom issues
bcxv said:
While I was using SM-N910P 5.1.1 N910PVPU4COG5_Deodexed Rom, I changed SecContacts_Note_USA.apk file and it turned into Hard Brick.
It's a typical Hard Brick Hard Brick symptom in which nothing shows up on a screen even I pressed a power button and there is no vibration on the phone.
If I connect it to a computer, QHSUSB_BULK pops up.
After I setup a driver, it connects to Qualcomm HS-USB QDLoader 9008.
As I was searching for some information, I could find a solution for Note3 Hard Brick.
However,I do not have unbric.img file as it says on the solution.
I need unbric.img file.
Help Me
Click to expand...
Click to collapse
Just install the ROM again it wont change anything besides having to reinstall xposed if you use that, or audio mods like viper.
ianmb said:
Can you get into download mode? Vol down+home+power. Seems odd that just changing that apk would brick your device, trust me I swap files in and out all the time but never had that issue.
Could be your battery is dead too
Click to expand...
Click to collapse
Impossible
battery full
Iceburn1 said:
Just install the ROM again it wont change anything besides having to reinstall xposed if you use that, or audio mods like viper.
Click to expand...
Click to collapse
recovery mode, download mode Impossible
Ok, for one thing, changing that file will not hard brick your phone.
You either did something else to cause this issue or your battery is drained or kaput... It's not unheard of around here.
Just out of curiosity how do you know the battery is full if you can't get anything from the screen?
jhill110 said:
Ok, for one thing, changing that file will not hard brick your phone.
You either did something else to cause this issue or your battery is drained or kaput... It's not unheard of around here.
Just out of curiosity how do you know the battery is full if you can't get anything from the screen?
Click to expand...
Click to collapse
Charging the spare battery
bcxv said:
Charging the spare battery
Click to expand...
Click to collapse
Ahh...
How old is the phone?
jhill110 said:
Ok, for one thing, changing that file will not hard brick your phone.
You either did something else to cause this issue or your battery is drained or kaput... It's not unheard of around here.
Just out of curiosity how do you know the battery is full if you can't get anything from the screen?
Click to expand...
Click to collapse
I would definitely agree with this. That file alone wouldn't brick your phone. Trust me, as many different files I swap in and out on a daily basis I've never had that happen.
jhill110 said:
Ahh...
How old is the phone?
Click to expand...
Click to collapse
Production date April 2015
ianmb said:
I would definitely agree with this. That file alone wouldn't brick your phone. Trust me, as many different files I swap in and out on a daily basis I've never had that happen.
Click to expand...
Click to collapse
No charge to phone
Charged with a charger
Same problem here,any solutions? Throw it away?
Hard bricked Note 4
Same as above. No power, nothing. Get the Qualcomm when connected to pc. Any ideas?
sshea72 said:
Same as above. No power, nothing. Get the Qualcomm when connected to pc. Any ideas?
Click to expand...
Click to collapse
Check if this helps...
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
Having problems with mine too please help
I have a note 4 from sprint....i havent used it in years but i try to turn it on and it dose and restarts when ba k up aging on the sprint spark screen and keeps doing that i changed batteries and nothing....i try going to recovery mode but just flickers on and off where the android picture but cant do nothin.......i cant rememeber if i was trying to root it or unroot it bt i think i was tryin to root it when the problem started......i try to connect it to the computer to root it and den unroot it but the computer cant get the drivers to find it....so i 2ant to know what can i do
texasrejects91 said:
I have a note 4 from sprint....i havent used it in years but i try to turn it on and it dose and restarts when ba k up aging on the sprint spark screen and keeps doing that i changed batteries and nothing....i try going to recovery mode but just flickers on and off where the android picture but cant do nothin.......i cant rememeber if i was trying to root it or unroot it bt i think i was tryin to root it when the problem started......i try to connect it to the computer to root it and den unroot it but the computer cant get the drivers to find it....so i 2ant to know what can i do
Click to expand...
Click to collapse
If you are for sure that your drivers are installed. (Double check our reinstall ). Plus make sure your using a Samsung usb cord (musty be a good one)
But if all that stuff is correct. Then you might have a failing battery or phone. That's about all the help i can provide.
If you could at least get the phone booted into download mode and pc to reconize it. Then i would Odin a stock firmware.
I was doing some experiment with DriveDroid and now I am in big mess.
I think I messed up with drivedroid settings and I was not able to see my phone (oneplus 3 rooted LOS 15.1 ) on my computers.
I have tried different computers but all cant detect my phone.
I have tried drivedroid wizard, different usb systems, different usb settings and no luck.
I have tried uninstalling the drivedroid and still no luck.
The phone was going in charging mode only. Its was not going to MTP mode so I can see the phone internal storage in computer
I have tried to do factory reset also but no luck.
Now I mistakenly wiped data partition also and now the phone is with
No OS
No USB detection on phone while in TWRP
No OTG detection
No any ROM.zip file in phone memory.
When I am on TWRP and connect my phone in computer I am seeing same error message and cant see my phone interenal storage.
Now what to do? Any way to flash ROM ?
I am in big mess, and I dont want to spend money on new phone as of now
I hope someone will be my angle and suggest me something to recover and save me from this mess...
Crying out loud now...
Hi, i think you can use adb sideload with twrp
Uruloki64 said:
Hi, i think you can use adb sideload with twrp
Click to expand...
Click to collapse
Phone is not recognized in computer while in twrp mode so it is not able to connct to adb via USB.
Just get os flashed at OnePlus service center.
I did something same in my previous Samsung phone. I took it to service center and told em that it's not booting up and I don't know the reason. They flashed the firmware from scratch, charged me 250 INR and my phone was back to being normal.
aj141 said:
Just get os flashed at OnePlus service center.
I did something same in my previous Samsung phone. I took it to service center and told em that it's not booting up and I don't know the reason. They flashed the firmware from scratch, charged me 250 INR and my phone was back to being normal.
Click to expand...
Click to collapse
Ya.. going there tomorrow. Lets see what they say about it.
amit3880 said:
Ya.. going there tomorrow. Lets see what they say about it.
Click to expand...
Click to collapse
have u tried hard bricked tool for OP3? if not then try it
https://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700
Hayatzada said:
have u tried hard bricked tool for OP3? if not then try it
https://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700
Click to expand...
Click to collapse
I am not able to follow this as phone is not even coming in USB mode. So its actually soft bricked because can go to twrp and fastboot mode and booting up without OS but USB is not able to detect on my computer.
now the service center guys saying I need to change the motherboard which I dont think is the issue, mother board is not going gone for sure as I can boot up in twrp and fastboot mode. its just may be the usb host controller gone.
Cant decide if I should go ahead with mother board replacement at cost of 10k INR ( phone cost was 28K INR) .
amit3880 said:
I am not able to follow this as phone is not even coming in USB mode. So its actually soft bricked because can go to twrp and fastboot mode and booting up without OS but USB is not able to detect on my computer.
now the service center guys saying I need to change the motherboard which I dont think is the issue, mother board is not going gone for sure as I can boot up in twrp and fastboot mode. its just may be the usb host controller gone.
Cant decide if I should go ahead with mother board replacement at cost of 10k INR ( phone cost was 28K INR) .
Click to expand...
Click to collapse
If you use the Method 2 of the Unbrick Guide, you don't need normal adb/usb mode recognition. Follow that guide scrupulously and step by step. Don't skip any and don't rush.
tnsmani said:
If you use the Method 2 of the Unbrick Guide, you don't need normal adb/usb mode recognition. Follow that guide scrupulously and step by step. Don't skip any and don't rush.
Click to expand...
Click to collapse
We are giving an advice of 10K InR in free and he is not even interested according to his opinion,
Hayatzada said:
We are giving an advice of 10K InR in free and he is not even interested according to his opinion,
Click to expand...
Click to collapse
I even tried that but somehow it is not even recognized as QHUSB_BULK device.
believe me I have tried all things to revive the phone but its not hard brick in my opinion, it can boot into twrp but the when I connect the phone in computer it shows the error message I shown as attachment in my first post.
yes, I have tried 2 different computers and few usb cables.
amit3880 said:
I even tried that but somehow it is not even recognized as QHUSB_BULK device.
believe me I have tried all things to revive the phone but its not hard brick in my opinion, it can boot into twrp but the when I connect the phone in computer it shows the error message I shown as attachment in my first post.
yes, I have tried 2 different computers and few usb cables.
Click to expand...
Click to collapse
Your phone need not be hardbricked to use the Guide. It will work even on a normal perfectly working phone. If your phone is not recognised while following the Guide, it only means one of two things: either it is a hardware fault or you are not following the Guide properly.
amit3880 said:
I even tried that but somehow it is not even recognized as QHUSB_BULK device.
believe me I have tried all things to revive the phone but its not hard brick in my opinion, it can boot into twrp but the when I connect the phone in computer it shows the error message I shown as attachment in my first post.
yes, I have tried 2 different computers and few usb cables.
Click to expand...
Click to collapse
reviewed post
tnsmani said:
Your phone need not be hardbricked to use the Guide. It will work even on a normal perfectly working phone. If your phone is not recognised while following the Guide, it only means one of two things: either it is a hardware fault or you are not following the Guide properly.
Click to expand...
Click to collapse
tried to follow the unbrick guide on windows 10 but phone is not seen as QSBULK device in device manager.
I am going to try on windows 7 as few post said that windows 7 would be better for unbricking than windows 10.
finger crossed, right now flashing windows 7 live iso on USB.
so finally I am declaring my op3 as hardware failure as one of my other phone (yureka) easily identified as 9008 mode in my computer but my op3 is not. so all drivers are installed correctly but somehow my op3's usb hub is failed.
i guess time to move on..
thank you everyone for spending time to help me. it really is supportive and encouraging...
amit3880 said:
so finally I am declaring my op3 as hardware failure as one of my other phone (yureka) easily identified as 9008 mode in my computer but my op3 is not. so all drivers are installed correctly but somehow my op3's usb hub is failed.
i guess time to move on..
thank you everyone for spending time to help me. it really is supportive and encouraging...
Click to expand...
Click to collapse
So sorry about that .... Sad news
@Ammit3880
have you tried plugging in a usb in you phone trough the usb OTG cable? see if twrp recognizes the usb. and just put the needed files on there. maybe windows is just breing ignorant as always
BADA 187 said:
@Ammit3880
have you tried plugging in a usb in you phone trough the usb OTG cable? see if twrp recognizes the usb. and just put the needed files on there. maybe windows is just breing ignorant as always
Click to expand...
Click to collapse
ya.. tried all the ways including various OTG cabel/dongle,, various OS windows 7/8/8.1/10 all the way..
nothing working...
amit3880 said:
ya.. tried all the ways including various OTG cabel/dongle,, various OS windows 7/8/8.1/10 all the way..
nothing working...
Click to expand...
Click to collapse
damn sorry to hear man.
BADA 187 said:
damn sorry to hear man.
Click to expand...
Click to collapse
Got 6T yesterday.... .. Yay!!
Couldnt find other phone competative in the price range.
Time to change the xda signature...
Although I bought 6T now and am kind of happy with that, but I am still missing my oneplus 3 and want to experiment on getting it revived.
By any chance someone can help me answering my doubts.. I would be greatful..
1. Is it ok to replace oneplus3's motherboard with oneplus 3t motherboard ? If by any chance i get any resell op3 or op3t in dirt cheap price I want to know if its ok to use 3T's motherboard.
2. Is there any way I can turn on the wifi from within TWRP and so I can connect to phone via adb over wifi/tcpip ??
Thank you all in advance.