I tried to upgrade my rom but the process crashed. The utility mtty doesn't work because when I connect the universal, boatloader mode by the cable, to the pc, it says "USB not recognized" (sometimes when I connect the computer is frozen till I disconnect the cable of the universal)
Please, I tried to have some solutions in the forum but all the posts indicates is needed previously the usb connection.
Do you know if should be possible to run the flash of the rom in other way, for example using a serial cable connected into the miniusb of the universal, because the boatloader screen says "Serie, v.1.01"
I apprecite what you can say please, I'm really in a hole.
Try this...
Try taking out the battery for a few minutes (10-30mins) and reboot your PC then repeat upgrade process. Hope that helps. Good luck!!!
I have the same problem on my PC at work, it's caused by a poor USB chipset in the PC, or trying to connect through a USB hub.
The only thing I found that worked was to try a different PC, then it was fine...
sl9 said:
I have the same problem on my PC at work, it's caused by a poor USB chipset in the PC, or trying to connect through a USB hub.
The only thing I found that worked was to try a different PC, then it was fine...
Click to expand...
Click to collapse
In my case it still happening in other computers. Conclussion: some piece of the software in the universal has been lost. The screen shows "Serial" that means on some way that is opened to comunication but not USB.
My questions are:
- should be possible to put some starting software in SD and do the universal boot on it.
- do you know how to connect to the computer COM! port from the usb miniport of the Universal.
I appreciate, I was not planning to replace now the Universal...
beginner said:
sl9 said:
I have the same problem on my PC at work, it's caused by a poor USB chipset in the PC, or trying to connect through a USB hub.
Now works.... I still thinking windows is so stupid software made for distroy our mind ....
Solved after install drivers for a converter usb -rs232 ( I was looking for the way to connect from rs232 the universal)
I'm happy again and I promise don't try to change rom again (at least for a while)
If some person is interested in what brand of software/hardware I installed, send me a mail...
Thanks hearing me ...
Click to expand...
Click to collapse
Click to expand...
Click to collapse
i have the same problem with my friend's uni
does it mean that you don't have to own any adapter, just have to install drivers for USB to RS232 adapter
if yes, where to find it?
thanx
respectfully
ZeD
zedino said:
i have the same problem with my friend's uni
does it mean that you don't have to own any adapter, just have to install drivers for USB to RS232 adapter
if yes, where to find it?
thanx
respectfully
ZeD
Click to expand...
Click to collapse
I want to say that is running after doing some things and obviously some of it solved my problems. I made:
- unistall last version of activesync and go back to version 4.0
- delete all the applications using ports usb.
due the connection still not running (windows message: device not recognized) and because in the screen of universal I saw: "COMM1" I tried to connect from computer port rs232. By that I purchased some special cable, name: hama brand, rs232 serial, 9 pin - usb.
As you can imagine all the steps I followed were followed by the typical restart of windows. In this sense is important to say that the universal, after connect, need to do a soft reset each time (again windows....)
Other comment is that I unmark the option to connect by usb in activesync and mark the connection by com1.
and after all was done, connecting by usb the unniversal, kill wcescomm, windows said "NEw usb device, sync device". I started mtty and now appears the USB option, great! same time the screen in universal changed from comm1 to usb, more great....
and that's all.
does it mean you solve your problem using special USB 2 RS232 connector?
ZeD
PS: it was my first idea , but i still believe i can solve the problem using USB port
zedino said:
does it mean you solve your problem using special USB 2 RS232 connector?
ZeD
PS: it was my first idea , but i still believe i can solve the problem using USB port
Click to expand...
Click to collapse
I think my english wording was not fine. I mean I solved my problem after install the sofware -drivers- of the rs232 connector, but connecting to the universal by usb as on standard way I was syncronizing previous the crack with activesync.
OK, where to get this driver?
thanx
?????????? NOTHING ?????????????
zedino said:
OK, where to get this driver?
thanx
Click to expand...
Click to collapse
Try here.
http://www.hama.de/portal/type*3/action*1026/searchMode*1/q*039703
I have had the same problem several times now (search the forum for the thread).
I tried three different PC's/laptops and three different USB cables all with the same error as yourself.
Eventually I got a connection but the laborious process of trying - failing, restarting windows and soft resetting the phone, trying - failing........... until it finally worked. I did nothing differently the time that it worked but the strange thing is that it has worked every time since! Maybe the USB driver the phone has a bug in it that causes it to get 'stuck' in a mode where it will no longer correctly operate but once you have managed to 'kick' it into action it seems toi then carry on working.
It was also a ROM upgrade that caused my USB phone driver to stop functioning. Maybe the fact that the phone has a slightly diffferent software configuration after the upgrade but exactly the same hardware fingerprint causes the driver to fail.
Every time that I have had this problem it is after an upgrade but once I have gotten it to work once with the new ROM, it always continues to function - until the next upgrade.
shrubbery said:
I have had the same problem several times now (search the forum for the thread).
I tried three different PC's/laptops and three different USB cables all with the same error as yourself.
Eventually I got a connection but the laborious process of trying - failing, restarting windows and soft resetting the phone, trying - failing........... until it finally worked. I did nothing differently the time that it worked but the strange thing is that it has worked every time since! Maybe the USB driver the phone has a bug in it that causes it to get 'stuck' in a mode where it will no longer correctly operate but once you have managed to 'kick' it into action it seems toi then carry on working.
It was also a ROM upgrade that caused my USB phone driver to stop functioning. Maybe the fact that the phone has a slightly diffferent software configuration after the upgrade but exactly the same hardware fingerprint causes the driver to fail.
Every time that I have had this problem it is after an upgrade but once I have gotten it to work once with the new ROM, it always continues to function - until the next upgrade.
Click to expand...
Click to collapse
not works, probably is this device lost forever, i have restarted device and PC almost hundred times, still the same result, uni stuck in Bootloader screen top of page "Serial" bottom of page "v1.00"
nothing changed, even if i connect to USB port
if someone have some solution to this s*it pls let me know
thanx
i have had the same. my device wast recognized by my pc, bur i used maupgradeno_id and installed a other rom, even installed the original rom from qtek (latest) then after i was finished it started then i tried the other rom and it was working. ( pc did see a unknown device ) hope you have the same and its working also.
good luck
mrijnvis said:
i have had the same. my device wast recognized by my pc, bur i used maupgradeno_id and installed a other rom, even installed the original rom from qtek (latest) then after i was finished it started then i tried the other rom and it was working. ( pc did see a unknown device ) hope you have the same and its working also.
good luck
Click to expand...
Click to collapse
no, my problem persist, hundred times i tried to recover friends device using upgrade by original shipped ROM but the device is not recognized by system so there is allways connection error, so this kind of reliving this UNI is not usable
anyway, thanx for raply and suggestion
ZeD
mrijnvis said:
i have had the same. my device wast recognized by my pc, bur i used maupgradeno_id and installed a other rom, even installed the original rom from qtek (latest) then after i was finished it started then i tried the other rom and it was working. ( pc did see a unknown device ) hope you have the same and its working also.
good luck
Click to expand...
Click to collapse
If you're stuck in bootloader mode only, visit www.buzzdev.netand look for ExitBootloader utility written by the great Buzz. Just follow his instructions or scroll thru' Universal's forum here and there for problems relating to "stuck in bootloader"
hope this helps
no device is not recognized by PC so any trying to use exitbl is not available, anyway this option was one of the first what i have tried
thanx anyway
ZeD
i had the same problem with the QTEK of my principal after I upgraded his ROMs.
(after the hard reset, the pocket remained in bootloader mode).
you can solve this problem in a very simple way:
you have to launch the bootloader installation (BL1.01_RUU_UNI_V.1.2.EXE) from the PC (still connected with the PPC through USB) while the PPC is in bootloader mode (on your display you see "USB > Serial 1.01" or something like that).
then you do a SOFT reset and the pocket boot normally.
very simple.
i hope to be helpful to someone.
zedino said:
no device is not recognized by PC so any trying to use exitbl is not available, anyway this option was one of the first what i have tried
thanx anyway
ZeD
Click to expand...
Click to collapse
I had some problem. After uninstall all usb applications in the pc and install the software for cable usb -rs 232, doing some softreset in the pda connected, it turned the screen message "Com" by "Usb"
Hello,
I'm an average user just following the creative work on XDA since I had my htc HD2 lion.
I hope you can help me
I have international galaxy note 2 GT-N7100
I rooted it long before 4.3 update and it was working great.
I updated through Kies without uprooting, it showed error at the end and switched to phone recovery and was updated to 4.3 and worked great.
Device status showed modified for a few days then showed official.
I tried to Root it using a method without pc but failed and showed patched kernel error.
Then I updated to 4.4.2 OTA from the phone and it worked fine and shows official status.
The problem now is the micro USB can not recognize pc] (it does not show USB icon and connected as MTP in the notification bar) and can not be recognized by pc (it does not even show USB device not recognized) , also can not recognize OTG storage ( it detects the OTG cable but not the flash disk.
I have tried everything related to all components including pc, drivers, cables, and all are working very fine with my Galaxy S3 including connection, drivers, Kies and Odin recognition.
I hope one of the senior developers can help me.
I would be very grateful to any one who can offer a solution
my friend is having the same problem. Whenever he connects his note 2 in any pc , his phone only charge and no usb. if you have found any solution then please let me know.
Try replace your usb cable.
EDIT:
Most part of that problem solved, I bought new USB socket with ribbon, and replaced it. It worked. it seems there was a cold solder near the socket. USB works now with other devices like Flash drive, mouse, etc..
Still there's a little problem - while connected to a PC, neither phone nor PC show any signs of connection.
Anyone met the same problem? I checked on to computers Win8.1 and Win7 - no response.
I tried to install some additional drivers but with no luck...
------------------------------------------------------------------------------------------------------------------
< Old >
I've got Huawei P6 and used it with a few ROMs, after flashing one I noticed android doesn't detect USB connection anymore.
It sees it as regular charger - no popup on notofication bar, no way to exchange data with PC.
Changing ROM doesn't solve the problem. I tried stock ones with no effect (installed from zip file in TWRP).
I searched over the web and found no similar case. I think rolling back to full stock could possibly help, but I'm not sure how to do it - will creating dload folder with install data be enough? does it contain all the kernels, recovery and so on - to have the software version exacly as from factory?
USB OTG doesn't seen to work now either, It all worked before. Is there a way to force-detect the connection?
Please, don't write me to check the cable or drivers or to clean the USB plug. Each double... tripple checked. Tried different cables, computers. I've no problem connecting other phones.
I'll be very greatful for help in solving this issue. Even copying a photo to a pc is a problem now...
thanks in advance
i have posted my problem earlier in this thread below and havent get solution yet
http://forum.xda-developers.com/galaxy-note-8-0/help/note8-null-imei-unknown-baseband-sim-t3158071
my device is
Samsung galaxy note 8 inch GT-N5100 android version 4.4.2 baseband unknown kernel 3.0.31-2637964 [email protected]#1
Version number KOT49H.N5100XXDNH3 IMEI NULL.
my problem is
- i can't connect my note to computer, when i connect the handheld the battery shows red X cross and it wouldnt detect neither wont charging.
- but when the device charged via ac adapter it work fine.
- the device wont recognice sim celluler card "mobile network not available"
nb: all feature and function works fine inclde wifi, bluetooth, etc. (the error just gsm function and connection usb mode with PC)
i have tried this some work but couldnt solved my problem yet.
- i cant rooted my device via odin caused by the device won't detect any usb to my pc. (normal mode or download mode)
- i tried to restore efs by efspro software but not working caused by the device won't detect any usb to my pc.
- i tried to rooted via cfautoroot apk not working either
http://forum.xda-developers.com/showthread.php?t=2291839
- i have replaced the Micro USB charging port receptacle and it just the same, i think the hardware of my usb port is fine.
https://www.youtube.com/watch?v=nvpNliFIuN4
what i havent try is restoring my efs file with flasher tools like octoplus box. because i dong have that tools. and i think its too expensive to solving my problem of one device with buying flashing tools investment.
http://forum.gsmhosting.com/vbb/f453/galaxy-note-8-n5100-efs-problem-1829891/
is there any other solution, or direction which reference should i read, or maybe who should i pm that maybe he has the same problem and solved the day before.
apreciated any help, response, and view. thnks. -Fardha-
fardha said:
i have posted my problem earlier in this thread below and havent get solution yet
http://forum.xda-developers.com/galaxy-note-8-0/help/note8-null-imei-unknown-baseband-sim-t3158071
my device is
Samsung galaxy note 8 inch GT-N5100 android version 4.4.2 baseband unknown kernel 3.0.31-2637964 [email protected]#1
Version number KOT49H.N5100XXDNH3 IMEI NULL.
my problem is
- i can't connect my note to computer, when i connect the handheld the battery shows red X cross and it wouldnt detect neither wont charging.
- but when the device charged via ac adapter it work fine.
- the device wont recognice sim celluler card "mobile network not available"
nb: all feature and function works fine inclde wifi, bluetooth, etc. (the error just gsm function and connection usb mode with PC)
i have tried this some work but couldnt solved my problem yet.
- i cant rooted my device via odin caused by the device won't detect any usb to my pc. (normal mode or download mode)
- i tried to restore efs by efspro software but not working caused by the device won't detect any usb to my pc.
- i tried to rooted via cfautoroot apk not working either
http://forum.xda-developers.com/showthread.php?t=2291839
- i have replaced the Micro USB charging port receptacle and it just the same, i think the hardware of my usb port is fine.
https://www.youtube.com/watch?v=nvpNliFIuN4
what i havent try is restoring my efs file with flasher tools like octoplus box. because i dong have that tools. and i think its too expensive to solving my problem of one device with buying flashing tools investment.
http://forum.gsmhosting.com/vbb/f453/galaxy-note-8-n5100-efs-problem-1829891/
is there any other solution, or direction which reference should i read, or maybe who should i pm that maybe he has the same problem and solved the day before.
apreciated any help, response, and view. thnks. -Fardha-
Click to expand...
Click to collapse
Are you using two different cables in testing or are you just moving the charging cable from the adapter? I found uninstalling the windows usb driver and rebooting to reinstall may help detect the device. Some usb ports dont have 500ma output for charging or change to a different port if available. Changing the connection type on the usb status icon to reset and set the type of connection may trigger the usb driver to connect. I think for the most part your windows driver is failing to initiaize and detect your device. Trouble is getting it to reset cleanly and install properly.
Once the device becomes detected, you can perform the steps to restore your device in order to use a sim card.
gooberdude said:
Are you using two different cables in testing or are you just moving the charging cable from the adapter? I found uninstalling the windows usb driver and rebooting to reinstall may help detect the device. Some usb ports dont have 500ma output for charging or change to a different port if available. Changing the connection type on the usb status icon to reset and set the type of connection may trigger the usb driver to connect. I think for the most part your windows driver is failing to initiaize and detect your device. Trouble is getting it to reset cleanly and install properly.
Once the device becomes detected, you can perform the steps to restore your device in order to use a sim card.
Click to expand...
Click to collapse
Thanks for your response,
About the cable is fine to apply for any gadget, but won't work on my Galaxy Note. I have repaired it at unofficial service center and they said there is no problem with the cable nor the usb port
And still, they don't know yet where the trouble is.
is there any possibilities to fix my Galaxy Note in this case? Thank You
I bought in January s4 mini duos
At the beginning i was well without problem I plug it into my pc it is detected without problem I did all my transfer data without problem
I put a day the system to an official 4.4.2 via Odin and all is well detected without the problem
But last week it is no longer detected on pc via usb cable when I plug it will start charging but without any sign of detection of equipment or on phone or pc .
I test other cables , other pc and nothing changes and the problem persists.
Help me please
bicha2016 said:
I bought in January s4 mini duos
At the beginning i was well without problem I plug it into my pc it is detected without problem I did all my transfer data without problem
I put a day the system to an official 4.4.2 via Odin and all is well detected without the problem
But last week it is no longer detected on pc via usb cable when I plug it will start charging but without any sign of detection of equipment or on phone or pc .
I test other cables , other pc and nothing changes and the problem persists.
Help me please
Click to expand...
Click to collapse
Does it connect in download mode? (maybe also try change MTP etc) Different mode uses different USB drivers etc. Have read sometimes a USB port seems to become disabled in one mode but will work in other.
Make sure your USB driver is good. Are you using the same drivers from some "dodgy" website if so uninstall and just allow Windows to find drivers or get from samsung.
You may be able to enter the USB service menu and change settings by entering *#0808# in dialer then select MTP (or maybe *#7284# & set to PDA)
But connector/power board may have a problem
IronRoo said:
Does it connect in download mode? (maybe also try change MTP etc) Different mode uses different USB drivers etc. Have read sometimes a USB port seems to become disabled in one mode but will work in other.
Make sure your USB driver is good. Are you using the same drivers from some "dodgy" website if so uninstall and just allow Windows to find drivers or get from samsung.
You may be able to enter the USB service menu and change settings by entering *#0808# in dialer then select MTP (or maybe *#7284# & set to PDA)
But connector/power board may have a problem
Click to expand...
Click to collapse
same problem in download mode is not detected.
I changed drivers but the problem persists.
when I 'll branch pc displays a notification at the bottom next to the date indicates an unrecognized USB device.
bicha2016 said:
same problem in download mode is not detected.
I changed drivers but the problem persists.
when I 'll branch pc displays a notification at the bottom next to the date indicates an unrecognized USB device.
Click to expand...
Click to collapse
Turn phone off. Remove battery & SIM (though I think it's probably the battery that does the trick). Reassemble & your USB may be back if it's none of the other things and it's not hardware .......:fingers-crossed:
(If it doesn't work 1st time do it again but only reassemble after a minute or two to be certain all power is drained from caps etc.)