Develop Bugs

[Q] Status 7?

Device: Samsung S3
Service Provider: AT&T
ROM: aokp_JB_4.2.2_d2att-ota-eng.task650-3.27.2013
I'm trying to install an update for my ROM and i have ran into a (status 7) while trying to flash the ROM after i have made a backup,wipe data/factory reset,wipe cache and dalvik,formating system. Once ive done these steps i hit my status 7 and install is aborted, i have been running this ROM for quite some time and have never had an issue installing an update until now so if there is any advice on this new issue of mine please help me out
this is the update im trying to install : aokp_JB_4.2.2_d2att-ota-eng.task650-3.31.2013
this is the link to the developers page : http://forum.xda-developers.com/showthread.php?t=1766684

This is the latest release of cwm recovery. Flash it and reboot recovery. You should be able to flash the rom/gapps with no problems

xBeerdroiDx said:
This is the latest release of cwm recovery. Flash it and reboot recovery. You should be able to flash the rom/gapps with no problems
Click to expand...
Click to collapse
Worked like a charm thank you very much!!

Can't flash CM 10.2 assert failed

Okay, just rooted with Odin, have CWM v6. Everything went fine, rooted fine, running stock rom.
Went to flash CM 10.2 Nightly, got assert error.
Used Odin to flash this: http://forum.xda-developers.com/showpost.php?p=41503727&postcount=13716
That was supposed to update my bootloader. Flashed successful, "PASS" from Odin.
Pull battery, start CWM, wipe data. try to flash CM 10.2 again, and get:
E: Error in /emmc/cm-10.2-20130927-NIGHTLY-d2att.zip
(Status 6)
Installation aborted.
What do I do now?
It lets me install 10.1 just fine.

What version did u update from? The link u posted is lk3, the newest is ucdmg2...

From another forum:
http://goo.gl/H2XYQ3 (link shortened)
"Status 6 is basically trying to read a file that's not encoded in UNIX"
Click to expand...
Click to collapse
the flashing script might have been modified afterwards by a UNIX-incompatible editor, which makes it unreadable by Android.
here's another link:
http://forum.xda-developers.com/showthread.php?t=1535546

[Q] CWM and rooting issue

Hi guys.
I am unable to flash CWM or root my i9082. I followed the guide and even successfully installed cwm but when I boot into cwm it says no command found and automatically boots into stock recovery. Then when I tried to install rooting package from stock recovery it says E:Signature verification failed even though when i have not changed the name of the rooting package.
Can someone help me. I have Android 4.2.2 on my galaxy i9082 duos.
I even tried philz recovery but still same.
Thanks
Guys I have rooted and installed CWM successfully using this :
http://www.youtube.com/watch?v=NsrJ2peDIHU

pr0t0c0l said:
Hi guys.
I am unable to flash CWM or root my i9082. I followed the guide and even successfully installed cwm but when I boot into cwm it says no command found and automatically boots into stock recovery. Then when I tried to install rooting package from stock recovery it says E:Signature verification failed even though when i have not changed the name of the rooting package.
Can someone help me. I have Android 4.2.2 on my galaxy i9082 duos.
I even tried philz recovery but still same.
Thanks
Guys I have rooted and installed CWM successfully using this :
http://www.youtube.com/watch?v=NsrJ2peDIHU
Click to expand...
Click to collapse
First of all..... you must place the "UPDATE-SuperSu-v1.25.zip" & "Fix-Recovery.zip" file in the root of external SD card....
While installing CWM using ODIN you must uncheck the "Auto reboot" option in the odin.....
after succesfull flashing of CWM remove the battery for 10 second and reinsert in after 10 sec....
now boot the phone in recovery using "vol up+home+power key" & not to the stock rom..... if you boot into rom.... the CWM will be automatically replaced by the stock recovery.....
after booting into CWM go to Install from SD card and flash the Fix-Recovery.Zip" first and then flash the super user....
and now you are done....
if you cant flash the fix recovery the after booting to rom it will again reverted to stock recovery...
hit THANKS if it helps you....

HTC One X

Hi guys
I'm having some trouble with my HOX. I`m currently running a rooted droid running android revolution 33.1. I have CWM 6.0.3.2 as my current recovery and am trying to update to 6.0.4.8 so I can put slimkat 9.0 on my HOX. As I understand it the slimkat rom requires SELinux support for the rom to run and the latest version of CWM has this.
I have tried flashing the update using flashify and rom manager. Both say they have flashed correctly, however when i boot into recovery my version is still the current one im running. I have also tried using fastboot to flash the new recovery and it keeps coming up with "unknown error" in windows CMD. I have also tried apply update.zip from the recovery and i keep getting the error message "E: Can't open /sdcard/update.zip no such file or directory". And the zip file i made is just called "recovery" and NOT "recovery.zip". I know this has caused trouble for other people, so this was the first thing I checked.
So I have a few questions. These are: Why fastboot won't flash the new recovery/why I get the error message "E: Can't open /sdcard/update.zip no such file or directory"/ would i have to revert to stock rom and recovery and relock so I could re root the HOX and install the latest recovery.
Any and all help is welcome and greatly appreciated.

Cyanogenmod Install failed on Galaxy S3 [SOLVED]

Hi Guys,
This is my first time working with a custom ROM. I have an old S3 which sucks due to Samsung bloatware. So, I wanted to play and install Cyanogenmod on it.
I have a Rogers Samsung Galaxy S3 (Canada) and the model is SGH-I747M. I was following https://wiki.cyanogenmod.org/w/Install_CM_for_d2att to install the recovery image & Release build (https://download.cyanogenmod.org/?device=d2att&type=snapshot). I am using a Mac.
Steps I followed:
Installed Heimdall Suite on the Mac
Downloaded CM12 build & Google App and transferred it over to my phone's internal storage
Restared in download mode
Transferred recovery image
Restarted in recovery mode
Wiped/Factory settings
Apply Update -> cmbuild.zip file
It tried to install and then gave me a "Install Failed" error. I was then able to re-boot normally and get into the phone.
Any ideas, suggestions on what did I miss and what can I do? Is it ok to install the CM12 release build for my S3? Or do I need to go with CM11 or lower?
Thanks.

Flash twrp via heimdall to the s3. After flashing, boot into twrp and flash cm12.1 and gapps.

audit13 said:
Flash twrp via heimdall to the s3. After flashing, boot into twrp and flash cm12.1 and gapps.
Click to expand...
Click to collapse
Ok, so I tried what you suggested. I am still getting Install failed error.
The error says:
Can't install this package on top of incompatible data. Please try another package or run a factory reset.
E: Error executing updater binary in zip '/sdcard/d2att.zip'
UPDATE:
Fixed the problem by Formatting through TWRP and flashing CM12 & GApps again. Worked . Thanks for the help.

Glad you succeeded!