Related
Hi,
I just got my Galaxy S III and decided to root it. I had done it before. I made a mistake and it wouldn't reboot, so, I had to put the stock rom on the device again. I found the stock rom, which was a 4.0.4 version and flashed it with no problem. But, then, the automatic update installed the 4.1.1 version. Here is when the problem starts: after installation, when I try to go into the recovery mode to clear the cache, the android is dead with a read triangle above it. I don't know what to do since I want to flash a custom rom.
Oh, a small detail that might be important. The stock rom is flashed using ODIN, but the reboot process is so lengthy, I have to remove the battery and then clear the cache before it fully reboots. At this stage (still 4.0.4) there is no problem with recovery mode and everything is fine. It is only after the update to 4.1.1 that the problem starts.
Your helps are much appreciated.:angel:
rezaasl2000 said:
Hi,
I just got my Galaxy S III and decided to root it. I had done it before. I made a mistake and it wouldn't reboot, so, I had to put the stock rom on the device again. I found the stock rom, which was a 4.0.4 version and flashed it with no problem. But, then, the automatic update installed the 4.1.1 version. Here is when the problem starts: after installation, when I try to go into the recovery mode to clear the cache, the android is dead with a read triangle above it. I don't know what to do since I want to flash a custom rom.
Oh, a small detail that might be important. The stock rom is flashed using ODIN, but the reboot process is so lengthy, I have to remove the battery and then clear the cache before it fully reboots. At this stage (still 4.0.4) there is no problem with recovery mode and everything is fine. It is only after the update to 4.1.1 that the problem starts.
Your helps are much appreciated.:angel:
Click to expand...
Click to collapse
So you can esily flash 4.0.4 with no hiccup but then you get the update (kies I assume) and it fails ?
Do you want to be rooted ?
if not just flash the stock 4.1.1 from Sammobile in Odin and update that way to avoid that Kies garbage
hednik said:
So you can esily flash 4.0.4 with no hiccup but then you get the update (kies I assume) and it fails ?
Do you want to be rooted ?
if not just flash the stock 4.1.1 from Sammobile in Odin and update that way to avoid that Kies garbage
Click to expand...
Click to collapse
Thanks for the reply. I do want to be rooted. Mine is an i747. Can you attach the link so I don't download the wrong one?
rezaasl2000 said:
Thanks for the reply. I do want to be rooted. Mine is an i747. Can you attach the link so I don't download the wrong one?
Click to expand...
Click to collapse
Find your carrier and flash one of these in Odin as they are pre-rooted.
http://forum.xda-developers.com/showthread.php?t=1739426
hednik said:
Find your carrier and flash one of these in Odin as they are pre-rooted.
http://forum.xda-developers.com/showthread.php?t=1739426
Click to expand...
Click to collapse
Thank you so much for the reply. After purchasing my g3 from AT&T, I used the same link you just sent me to flash the device. But it didn't work even though I changed the USB port. It installs SuperSU, but the recovery fails. I will try it one more time before and report back to you.
thanks again.
rezaasl2000 said:
Thank you so much for the reply. After purchasing my g3 from AT&T, I used the same link you just sent me to flash the device. But it didn't work even though I changed the USB port. It installs SuperSU, but the recovery fails. I will try it one more time before and report back to you.
thanks again.
Click to expand...
Click to collapse
It failed again (dead android with a red triangle above it). I have checked the ODIN version, whether the md5 file was downloaded correctly. I'm very frustrated.
rezaasl2000 said:
It failed again (dead android with a red triangle above it). I have checked the ODIN version, whether the md5 file was downloaded correctly. I'm very frustrated.
Click to expand...
Click to collapse
So you can't flash anything 4.1.1 or 4.1.2 ? That's odd that only 4.0.4 works. Does it fail with Kies too ?
What about just rooting using CF-auto root or casual and then flashing a rom ?
hednik said:
So you can't flash anything 4.1.1 or 4.1.2 ? That's odd that only 4.0.4 works. Does it fail with Kies too ?
What about just rooting using CF-auto root or casual and then flashing a rom ?
Click to expand...
Click to collapse
Okay, so, this method didn't work either. I went back to the link you sent me with the pre-rooted version and flashed it. Now, it has the same problem (dead android with red triangle), but RootChecker says that I'm rooted. I don't know what difference that makes.
Any thoughts?
rezaasl2000 said:
Okay, so, this method didn't work either. I went back to the link you sent me with the pre-rooted version and flashed it. Now, it has the same problem (dead android with red triangle), but RootChecker says that I'm rooted. I don't know what difference that makes.
Any thoughts?
Click to expand...
Click to collapse
So cf auto root worked but you can't flash ? You need to install a recovery. Can you flash a custom recovery in Odin or mobile Odin ?
Sent from my SGH-I747 using xda premium
hednik said:
So cf auto root worked but you can't flash ? You need to install a recovery. Can you flash a custom recovery in Odin or mobile Odin ?
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
So, I finally figured it out. I used the samsung galaxy s3 toolkit to install the stock firmware and then I updated it on the phone. Next, I went back to the toolkit and installed the most recent version of CWM on it and everything just worked beautifully. I have LiquidSmooth installed and it works just great.
thank you for the help hendik.
:good:
:victory: Good news, Android 4.3 Jelly Bean for the Canadian i747m is here!! :victory:
Android version : 4.3
Version number / Baseband : I747MVLUEMK5
Kernel version : 3.0.31-2140838
Click to expand...
Click to collapse
Thanks to @hyelton who provided fast mirrors to, as of now, Bell, Telus, Rogers and Koodo images
http://storagecow.eu/index.php?dir=Xda/Galaxy+S3/Stock+Roms/4.3/Canada/
Old links below. They still work, but are awfully slow!
Bell image
SamMobile.com: http://www.sammobile.com/firmwares/1/?model=SGH-I747M&pcode=BMC#firmware
samsung-updates.com: http://samsung-updates.com/details/16400/Galaxy_S_3_North_America/SGH-I747M/BMC/I747MVLUEMK5.html
Click to expand...
Click to collapse
If you are running stock, check if an OTA is available for you.
If not, you can alway get it from sammobile.com or samsung-updates.com... links to official firmwares below.
Please note, we are missing Virgin image links!
If you're looking for pre-rooted & deodexed CWM/TWRP flashable versions (with or without KNOX), please look at @kriEv thread here
Guys, please keep all canadian i747m 4.3 Jelly Bean discussions here so that we do not clutter the forum with useless threads.
Rogers image
SamMobile.com: http://www.sammobile.com/firmwares/1/?model=SGH-I747M&pcode=RWC#firmware
samsung-updates.com: http://samsung-updates.com/details/16401/Galaxy_S_3_North_America/SGH-I747M/RWC/I747MVLUEMK5.html
Click to expand...
Click to collapse
Telus image
SamMobile.com: http://www.sammobile.com/firmwares/1/?model=SGH-I747M&pcode=TLS#firmware
samsung-updates.com: http://samsung-updates.com/details/16404/Galaxy_S_3_North_America/SGH-I747M/TLS/I747MVLUEMK5.html
Click to expand...
Click to collapse
Koodo image
SamMobile.com: http://www.sammobile.com/firmwares/1/?model=SGH-I747M&pcode=KDO#firmware
samsung-updates.com: n/a
Click to expand...
Click to collapse
Fido image
SamMobile.com: http://www.sammobile.com/firmwares/1/?model=SGH-I747M&pcode=FMC#firmware
samsung-updates.com: n/a
Click to expand...
Click to collapse
Sasktel image
SamMobile.com: http://www.sammobile.com/firmwares/1/?model=SGH-I747M&pcode=BWA#firmware
samsung-updates.com: http://samsung-updates.com/details/16403/Galaxy_S_3_North_America/SGH-I747M/BWA/I747MVLUEMK5.html
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Odin
[ODIN] Desktop ODIN ver 3.07 for use with Samsung Galaxy S III
Click to expand...
Click to collapse
Installation & root method with CF-Root by @SkyboneNoya
Update:
If you already have a custom recovery installed :
Make a recovery backup of your current rom
(to restore to after you get a custom recovery installed and save it to your computer as well as backing up all SD cards... It’s just a good practice.)
If coming from any other ROM than stock 4.1.2 :
Install 4.1.2 update with odin via SamMobile.com
Clear data/cache/dalvik in recovery (or hang on the Samsung logo for the night).
Upgrade to 4.3 OTA or via Odin
Hint : Use provided links to your carriers images above!
Root method
Go to [SGH-I747/M] CF-Auto-Root|
Follow the steps on post 2 in that thread.
Once rebooted: open up SuperSU, click OK then normal and reboot.
I used the KNOX uninstaller and when trying to restore back to stock I had google apps issue warning locking me out of the system. So use at your own discretion.
You should be good to go.
The rest is pretty easy.
Also, you might have trouble installing custom roms at this point. I747MVLUEMK5 is probably not listed in the installers yet. That's a whole other story.
Other options here as well if the above didn’t work for you. |Guide|How-To| Root & Install Custom Recovery for 4.3 Update |22 Nov 2013|
To enable USB debugging through Developer Options, go in System Settings/About and click on build number about 7 times. (old google trick if you didn’t know)
PS. Thanks and donations to Chainfire and other helping community members creating these easy to find threads for us should be common cents
Click to expand...
Click to collapse
WARNING : Carrier IQ seems to be present for all 3 major carriers as found here by @DexedrineXR
UPDATE : @D0T-C0M got an answer from Fido, who asked Samsung directly, stating that no phone sold in Canada has Carrier IQ installed.
Source here
DISCLAIMER : I am not responsible for bricked devices, dead SD cards or whatever happens to your phone. You are expected to know what you are doing when attempting to flash your phone.
Thanks! Just waiting for a pre rooted telus version to pop up on here now
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Yeah, same thing here ... and also wait for the day at the office to be over.
And it's only 8h25 am... damn! lol
I wonder if we are going to run into the same downgrade problems that the At&t ota had.
Can anybody who updated post a screen shot of their about screen in settings please?
Sent from my SGH-I747M using xda app-developers app
Just completed the update. So far, so good.
Some minor (but nice) visual enhancements, speed is at least as good as before, nothing to complain about but nothing groundbreaking (but nobody was expecting that from 4.3).
Can't post a screeshot right now but baseband is mk5 and kernel is 3.0.31-2140838
I updated with kies and I'm with Rogers.
I haven't done a factory reset (like I usually do after a major update) but the responsiveness of my phone makes me believe it may not be necessary. Time will tell.
updating right now 555.85mb download
Stupid queation... Can i flash the zip through twrp.? Or do i nees to go back to stock unrooted state to get this update.?
Sent from my SGH-I747M using Tapatalk
TKG26 said:
Stupid queation... Can i flash the zip through twrp.? Or do i nees to go back to stock unrooted state to get this update.?
Click to expand...
Click to collapse
If you are stock, unrooted, you'll easily update over the air.
If you're going the factory image way using of the above links, you'll need to use either Odin or Mobile Odin.
Ok thanks.
Ill fireup odin tonight im on 4.1.2 rooted rom now.
Sent from my SGH-I747M using Tapatalk
HiKsFiles said:
If you are stock, unrooted, you'll easily update over the air.
If you're going the factory image way using of the above links, you'll need to use either Odin or Mobile Odin.
Click to expand...
Click to collapse
i was on 4.1.2 rooted and did the OTA
Going to try see if Fido has the update on stock or then just flash rogers. Is this advisable or no? Same network so..
Edit: there's fido right here http://www.sammobile.com/firmwares/
im on quntum rom kitkat right now,can i flash this with odin? or i have to install 4.1.2 first¿?
fr3d0x said:
im on quntum rom kitkat right now,can i flash this with odin? or i have to install 4.1.2 first¿?
Click to expand...
Click to collapse
Using Odin to go back to 4.1.2 Fido here. Pick whatever carrier 4.1.2 you need from Firmwares.
http://www.sammobile.com/firmwares/
Had to go into recovery which I still had after flashing 4.1.2 over odin. Wiped data/cache and reboot.
Downloaded installed 4.3 OTA Just going to try gain root and see how it goes.
Updating the baseband
Hi, I am running my s3 i747m fido on Quantum Rom V3 RC3 kitkat 4.4. I was wondering can i flash the Fido baseband using recovery. (I have Clockwork Mod for my recovery screen). Or do I need to go back to stock to do this first?
thanks
Was on quantam, downloaded this and flashed it via odin, installed fine but taking forever to boot just samsung and the led is blue
what if I use only clockworkmod to flash it? Will it brick my phone ?
Also I bought the phone from Rogers but I am using it with Fido. Which baseband should I use Fido or Rogers?
entheogenx said:
what if I use only clockworkmod to flash it? Will it brick my phone ?
Also I bought the phone from Rogers but I am using it with Fido. Which baseband should I use Fido or Rogers?
Click to expand...
Click to collapse
The files on sammobile are full firmware files, which include bootloader, modem etc. You can use kies or odin to flash them but i don't think you can through cwm.
I'd use the Rogers firmware if it was me, but I can't be sure.
Sent from my SGH-T999 using xda app-developers app
has anyone who wasnt on stocked used odin to flash this without flashing 4.1.2 first????
My post above explains how to get 4.3 ota from quantum 4.4 I've yet to try gain root.
fr3d0x said:
im on quntum rom kitkat right now,can i flash this with odin? or i have to install 4.1.2 first¿?
Click to expand...
Click to collapse
Using Odin to go back to 4.1.2 Fido here. Pick whatever carrier 4.1.2 you need from Firmwares.
http://www.sammobile.com/firmwares/
Had to go into recovery which I still had after flashing 4.1.2 over odin. Wiped data/cache and reboot.
Downloaded installed 4.3 OTA Just going to try gain root and see how it goes.
Click to expand...
Click to collapse
Andrew_han said:
Was on quantam, downloaded this and flashed it via odin, installed fine but taking forever to boot just samsung and the led is blue
Click to expand...
Click to collapse
Try get into recovery and wipe data/cache
entheogenx said:
what if I use only clockworkmod to flash it? Will it brick my phone ?
Also I bought the phone from Rogers but I am using it with Fido. Which baseband should I use Fido or Rogers?
Click to expand...
Click to collapse
Use whatever firmware you got with the phone. Rogers would come with Rogers.
Thanks for the replies.
Because I am not too familiar with Odin, If I go back to stock and install the 4.3 firmware via OTA then root the phone and install Quantum Rom will the firmware still be updated? Sorry if it is a newb questions.
Thanks.
I tired to root my galaxy s3 but ended up bricking it for a while and all i got was the Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. After trying odin so many time i finally got it to work but now i have another issue...i put verizon 4.1 on my phone using odin instead of att. my att sim wont work and i dont know how i am going to get it back to att stock rom so i can use my phone again!!! if anyone know how to reset this please help i just got the phone and now i cant use it because it has Verizon instead of att galaxy s3 stock rom on it.:crying:
pimpjayjay said:
I tired to root my galaxy s3 but ended up bricking it for a while and all i got was the Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. After trying odin so many time i finally got it to work but now i have another issue...i put verizon 4.1 on my phone using odin instead of att. my att sim wont work and i dont know how i am going to get it back to att stock rom so i can use my phone again!!! if anyone know how to reset this please help i just got the phone and now i cant use it because it has Verizon instead of att galaxy s3 stock rom on it.:crying:
Click to expand...
Click to collapse
Did you ever flash android 4.3 on you're phone? (This is important)
Ali7000 said:
Did you ever flash android 4.3 on you're phone? (This is important)
Click to expand...
Click to collapse
it already had 4.3 i was trying to root it but the process faild and all i get is the error Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again
pimpjayjay said:
it already had 4.3 i was trying to root it but the process faild and all i get is the error Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again
Click to expand...
Click to collapse
Try these http://forum.xda-developers.com/showthread.php?t=2498233, stock at&t rooted without Knox (Believe me man, better without knox). But they are only leaks of the official firmware. I am not a professional developer so you might wanna create a new thread and ask if it's possible in you're situation.
Ali7000 said:
Try these http://forum.xda-developers.com/showthread.php?t=2498233, stock at&t rooted without Knox (Believe me man, better without knox). But they are only leaks of the official firmware. I am not a professional developer so you might wanna create a new thread and ask if it's possible in you're situation.
Click to expand...
Click to collapse
okay i will look it up and see if it works , thanks.
The Canadian and US phones are pretty similar. Maybe a Canadian rom will work?
You can find official firmware here: http://www.sammobile.com/firmwares/1/?model=SGH-I747&pcode=ATT#firmware
audit13 said:
The Canadian and US phones are pretty similar. Maybe a Canadian rom will work?
You can find official firmware here: http://www.sammobile.com/firmwares/1/?model=SGH-I747&pcode=ATT#firmware
Click to expand...
Click to collapse
No it won't work. Since it is a stock rom it most likely will not work, he won't be able to call, text, or use data.
Ali7000 said:
No it won't work. Since it is a stock rom it most likely will not work, he won't be able to call, text, or use data.
Click to expand...
Click to collapse
I wasn't sure if the OP could install some sort of stock firmware to get his phone going and then install the necessary radio.
audit13 said:
I wasn't sure if the OP could install some sort of stock firmware to get his phone going and then install the necessary radio.
Click to expand...
Click to collapse
The best choice for him is to stick to a custom rom until the AT&T 4.3 update releases.
Ali7000 said:
The best choice for him is to stick to a custom rom until the AT&T 4.3 update releases.
Click to expand...
Click to collapse
Wow. it seems as if you got people in here just giving you ODIN TARS to flash. i wouldnt listen/ flash anything than the leaked 4.3 update for att because MOST odin files have bootloader upgrades in them and if you are on 4.3 you will brick trying to restore stock
Andy_nu said:
Wow. it seems as if you got people in here just giving you ODIN TARS to flash. i wouldnt listen/ flash anything than the leaked 4.3 update for att because MOST odin files have bootloader upgrades in them and if you are on 4.3 you will brick trying to restore stock
Click to expand...
Click to collapse
Hah Yah man I've been through a lot sh**.
Sent from my SGH-I747M using XDA Premium 4 mobile app
At&t Tar files
what should i do, the tar file for Verizon still fails but it will go as far as to let my device boot but so i can at least get to recovery mode and then i can reboot it and clear system data but of courses that not what i want because it running Verizon.I is there a way to find the tar file that has at&t on it so i can try to make it work?
Ali7000 said:
Hah Yah man I've been through a lot sh**.
Sent from my SGH-I747M using XDA Premium 4 mobile app
Click to expand...
Click to collapse
what should i do, the tar file for Verizon still fails but it will go as far as to let my device boot but so i can at least get to recovery mode and then i can reboot it and clear system data but of courses that not what i want because it running Verizon.I is there a way to find the tar file that has at&t on it so i can try to make it work?
Based on the OP, the phone is currently running Verizon's 4.1 which leads me to believe the bootloader has not been updated beyond 4.1.2 since recovery mode is accessible; therefore, I think flashing 4.11 or 4.1.2 stock roms would be fine.
As always, it's best to check the installed bootloader before proceeding with any more flashes.
I used the stock firmware from here to downgrade my Bell s3 from stock 4.1.2 to stock 4.1.1.
Stock firmware: http://www.sammobile.com/firmwares/1/?model=SGH-I747&pcode=ATT#firmware
pimpjayjay said:
what should i do, the tar file for Verizon still fails but it will go as far as to let my device boot but so i can at least get to recovery mode and then i can reboot it and clear system data but of courses that not what i want because it running Verizon.I is there a way to find the tar file that has at&t on it so i can try to make it work?
Click to expand...
Click to collapse
Download the ATT Image
Current I747UCDLK3 (JB 4.1.1)
http://forum.xda-developers.com/showthread.php?t=1739426
audit13 said:
Based on the OP, the phone is currently running Verizon's 4.1 which leads me to believe the bootloader has not been updated beyond 4.1.2 since recovery mode is accessible; therefore, I think flashing 4.11 or 4.1.2 stock roms would be fine.
As always, it's best to check the installed bootloader before proceeding with any more flashes.
I used the stock firmware from here to downgrade my Bell s3 from stock 4.1.2 to stock 4.1.1.
Stock firmware: http://www.sammobile.com/firmwares/1/?model=SGH-I747&pcode=ATT#firmware
Click to expand...
Click to collapse
i wouldnt flash the bootloader just to to be safe though. id flash the recovery from the root forum and then install a cm or aosp ROM.
or open the tar and make sure there are not bootloader related files i forgot all of them but one is mbl. something and 1,2,3 theres a post on here how to check i just dont know where
So, i decide to root my s3 because i wanted to do some cool stuff. I got odin, got the tar file and tried flashing it. For some reason it didn't work :crying: On odin it gave me a fail. I was in download mode too. So, when i turn on my s3 it is in odin mode but it says "firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." i did this in kies and when it was at like 99% it gives me an error. :crying:
so i tried flashing again in odin still fail, but i get on my s3 SV REV CHECK FAIL: Fused 2 > Binary 0. I have no clue what that means, So, i just want my phone to get working again i dont care about rooting anymore. JUST HELP ME FIX IT!!!!:crying:
BTW: I di root my Kindle Fire a while back so i thought I would have experience with this (i kind of do) but i guess I thought wrong.
Was your phone running a stock 4.3 AT&T ROM? What method did you use to try and root the phone?
audit13 said:
Was your phone running a stock 4.3 AT&T ROM? What method did you use to try and root the phone?
Click to expand...
Click to collapse
i think so and i tired using odin and i put the phone in download mode so i could flash the .tar file
Resistance225 said:
i think so and i tired using odin and i put the phone in download mode so i could flash the .tar file
Click to expand...
Click to collapse
Since your phone was running a stock 4.3 ROM, you can't use Odin to install a stock AT&T 4.3 ROM because it doesn't exist. There are leaked ROMs around that you could try flashing.
Alternatively, you could install a custom recovery and install a custom 4.4.2 ROM.
audit13 said:
Since your phone was running a stock 4.3 ROM, you can't use Odin to install a stock AT&T 4.3 ROM because it doesn't exist. There are leaked ROMs around that you could try flashing.
Alternatively, you could install a custom recovery and install a custom 4.4.2 ROM.
Click to expand...
Click to collapse
I will try to do this! Thanks for helping me though, i will keep you updated. :fingers-crossed:
audit13 said:
Since your phone was running a stock 4.3 ROM, you can't use Odin to install a stock AT&T 4.3 ROM because it doesn't exist. There are leaked ROMs around that you could try flashing.
Alternatively, you could install a custom recovery and install a custom 4.4.2 ROM.
Click to expand...
Click to collapse
I installed a recovery and guess what, it started working again! All my data was still there too! Thanks i really appreciate you taking the time to help me! I also was able to succsessfully root it by using the CF auto root .tar file. Once again, thanks a ton!
Resistance225 said:
I installed a recovery and guess what, it started working again! All my data was still there too! Thanks i really appreciate you taking the time to help me! I also was able to succsessfully root it by using the CF auto root .tar file. Once again, thanks a ton!
Click to expand...
Click to collapse
Glad you got it working. We're all here to help.
so i have a rooted at&T galaxy s3 on the latest stock firmware which i guess is 4.3. i tried flashing resurrection rom which was kit kat and it failed. so i restored my back up and the phone would get stuck on the splash screen. so i formated the whole phone and forgot to save my backup to my sdcard. twrp now says that i have no OS installed and also says i am not rooted anymore. im scared and need a little assistance. i just want to get it going.
Just flash the latest TWRP, copy a custom ROM to your phone, boot into TWRP, and flash it.
audit13 said:
Just flash the latest TWRP, copy a custom ROM to your phone, boot into TWRP, and flash it.
Click to expand...
Click to collapse
i bought a micro sc card reader and transfered a superuser zip and an old 4.3 beanstalk rom. it flashed fine last night. i used my phone all day and downloaded the latest 4.3 beanstalk rom and just tried to flash it and it FAILED. This is the second time i had a flash fail. I tried flashing that old beanstalk rom again and it failed too! what the heck???? my battery is a little low.....does twrp have some kind of safety built in where it wont flash if bettery is low?
ok...so i flashed cwm because im more familiar it than twrp. then i flashed an old slimbean 4.3 rom i had. everything worked fine and the phone booted up perfectly. i dont want slim bean so i rebooted into cwm and tried to flash the newest 4.3 beanstalk rom and it failed.....why?
scorey03 said:
ok...so i flashed cwm because im more familiar it than twrp. then i flashed an old slimbean 4.3 rom i had. everything worked fine and the phone booted up perfectly. i dont want slim bean so i rebooted into cwm and tried to flash the newest 4.3 beanstalk rom and it failed.....why?
Click to expand...
Click to collapse
Did you install the latest CWM? Is the 4.3 Beanstalk based on Kit Kat?
audit13 said:
Did you install the latest CWM? Is the 4.3 Beanstalk based on Kit Kat?
Click to expand...
Click to collapse
no its not based on kitkat. i flashed an older version of cwm via odin. i figured i could just update it with rom manager. i tried to update cwm to the latest verion and it fails everytime. so...i downloaded root checker from the play store and it says im not rooted. i need to fix this lol
im running a custom rom but yet root checker says its not rooted...hmm
Flash the latest Philz and. Validus as I know that is a rooted ROM. Personally, I don't use ROM manager.
scorey03 said:
im running a custom rom but yet root checker says its not rooted...hmm
Click to expand...
Click to collapse
What custom Rom is this?
Sent from my HTC One using Tapatalk
I'm on slimbean 4.3 and I've lost root. I want root back so I can get rid of this ROM. Ive flashed supersu multiple times with cwm..but I still do not have root access.
So I guess my question now is.....how do I get back to stock rooted? Im on slimbean 4.3 without root access.
scorey03 said:
I'm on slimbean 4.3 and I've lost root. I want root back so I can get rid of this ROM. Ive flashed supersu multiple times with cwm..but I still do not have root access.
Click to expand...
Click to collapse
Rooting is not needed to flash another ROM. Just boot into recovery, wipe, and flash another ROM.
audit13 said:
Rooting is not needed to flash another ROM. Just boot into recovery, wipe, and flash another ROM.
Click to expand...
Click to collapse
I tried and it failed......
scorey03 said:
I tried and it failed......
Click to expand...
Click to collapse
What rom and which recovery did you try?
I suggest you Odin to stock and try all this again
Sent from my ATT Samsung Galaxy SIII using TapaTalk
crazymonkey05 said:
I suggest you Odin to stock and try all this again
Sent from my ATT Samsung Galaxy SIII using TapaTalk
Click to expand...
Click to collapse
I agree 100%. Can you tell me where I can get stock 4.3 firmware?
Here is a repository with a lot of stock firmwares http://forum.xda-developers.com/showthread.php?t=1968625
Sent from my ATT Samsung Galaxy SIII using TapaTalk
scorey03 said:
I agree 100%. Can you tell me where I can get stock 4.3 firmware?
Click to expand...
Click to collapse
There is no stock ATT 4.3 ROM because ATT only released 4.3 as an OTA update. Do not flash any 4.3 firmware (even from sammmobile.com) unless it has been compiled for installation via Odin. Check the development threads for firmware that can be flashed via Odin.
crazymonkey05 said:
Here is a repository with a lot of stock firmwares http://forum.xda-developers.com/showthread.php?t=1968625
Sent from my ATT Samsung Galaxy SIII using TapaTalk
Click to expand...
Click to collapse
ok. im going to flash I747UCUEMJ2.7z which came from that link/thread you posted via odin.
If you got the phone on 4.3 you need to flash mjb or else you will brick the device
Sent from my ATT Samsung Galaxy SIII using TapaTalk