Develop Bugs

WHITE ULTRA THIN 0.3mm review

Picked up one of these cases from ebay;
http://www.ebay.ca/itm/180931774909?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#ht_1503wt_770
and I have to say it, for what it's made for, is great! Now, I don't drop my phone a whole heck of a lot, so I wasn't looking for something to protect it against constant drops. What I wanted was something to protect the back/sides against scratches/nicks when it is in my pocket. And this does exactly that. It's super thin, which is noticeable when coming from other cases. The fact that it is opaque means that the design of the phone is pretty much intact. Which is great for this phone, since it is quite good looking to begin with. One added bonus, the case does have a very small lip to it which protects the screen when putting the phone down, face down.
If you are looking for an inexpensive case to do the basics(protect from scratches, minor drops, look good, have all buttons/ports easily accessible), then I would suggest this case.

any pictures of your s3 with it? the ebay pics aren't cutting it for me

does it cover the entire bottom of the phone?

leak73 said:
Picked up one of these cases from ebay;
http://www.ebay.ca/itm/180931774909?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#ht_1503wt_770
and I have to say it, for what it's made for, is great! Now, I don't drop my phone a whole heck of a lot, so I wasn't looking for something to protect it against constant drops. What I wanted was something to protect the back/sides against scratches/nicks when it is in my pocket. And this does exactly that. It's super thin, which is noticeable when coming from other cases. The fact that it is opaque means that the design of the phone is pretty much intact. Which is great for this phone, since it is quite good looking to begin with. One added bonus, the case does have a very small lip to it which protects the screen when putting the phone down, face down.
If you are looking for an inexpensive case to do the basics(protect from scratches, minor drops, look good, have all buttons/ports easily accessible), then I would suggest this case.
Click to expand...
Click to collapse
FYI:
opaque: Not able to be seen through; not transparent.
transparent: Allowing light to pass through so that objects behind can be distinctly seen.
this case is semitransparent to get technical.. not opaque.

http://www.ebay.com/sch/i.html?_sacat=0&_nkw=galaxy s3 case 0.3&_sop=15

leak73 said:
Picked up one of these cases from ebay;
http://www.ebay.ca/itm/180931774909?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#ht_1503wt_770
and I have to say it, for what it's made for, is great! Now, I don't drop my phone a whole heck of a lot, so I wasn't looking for something to protect it against constant drops. What I wanted was something to protect the back/sides against scratches/nicks when it is in my pocket. And this does exactly that. It's super thin, which is noticeable when coming from other cases. The fact that it is opaque means that the design of the phone is pretty much intact. Which is great for this phone, since it is quite good looking to begin with. One added bonus, the case does have a very small lip to it which protects the screen when putting the phone down, face down.
If you are looking for an inexpensive case to do the basics(protect from scratches, minor drops, look good, have all buttons/ports easily accessible), then I would suggest this case.
Click to expand...
Click to collapse
What is the feel of the case? Is it plastic or is it frosted or matte-like?
Thank you

aly19 said:
What is the feel of the case? Is it plastic or is it frosted or matte-like?
Thank you
Click to expand...
Click to collapse
it feels plasticky frosted
Sent from my SGH-T999

Any pictures?
Sent from my SGH-T999 using xda app-developers app

i got two of them too!
bought a double package on ebay, including one white and one black.
the cut outs are perfect, the fit is awesome perfect too!
got a white s3 and put the black ultra thin skin on it, looks so awesome.

shuiguo said:
In fact buy Mobile Accessories cheap each web site have, for me or for himself that he like, I buy's hard-core Scrub Shining Series Case Skin
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
what?

NoOneCanHelpMe said:
what?
Click to expand...
Click to collapse
lol. My reaction exactly. Sorry for laughing.

NoOneCanHelpMe said:
what?
Click to expand...
Click to collapse
Probably used Google translate
Sent from my SCH-I535 using xda app-developers app

slim full coverage tpu case - button cut outs $4

update: WARNING: Will Stain WHITE HTC ONE
$4 shipped. slim clean matte tpu.
http://www.ebay.com/itm/Black-Soft-Silicone-Gel-TPU-Jelly-Case-Cover-Skin-Screen-Guard-For-HTC-One-M7-/360666688825?pt=US_Cell_Phone_PDA_Cases&hash=item53f968ed39
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
pictures from ebay - black on black

Looks very nice, got myself one. Almost made me want to have the black One lol

wow. 4 dollars? nothing to lose. ill post about it when i receive it.

BTW transit time from china to U.S. was an impressive 7 business days. It actually looks better in person then the picture I posted.

woah nice find! was looking for a change of case and looks like with this case, the power button is gonna be a lot easier to press than my current Belkin Sheer Grip Matte due to the fact that the plastic at the back of the case is slightly lowered where the power button is. Just ordered one for myself and one for a mate. Thanks for posting.

Thats the ONE for the ONE. I also have it and love it. Very sleek, keeps the phone looking the way it was supposed to.

here's a better picture.

How big is the front lip

Thanks for taking the time to post this I really like it
Sent from my HTC One using xda premium

Mr Hick said:
How big is the front lip
Click to expand...
Click to collapse
Barely big enough to cover the glass screen protector. I think if it is any less then it would be without one. This doesn't add any bulge and maintains the sleek look of the phone

FYI I have a red silicone cover without a power button cut out, and the IR transmitter works
Sent from my HTC One using xda premium

sbihue said:
Barely big enough to cover the glass screen protector. I think if it is any less then it would be without one. This doesn't add any bulge and maintains the sleek look of the phone
Click to expand...
Click to collapse
Correct, trim is good enough for its purpose, protection when laying flat on face. A thick trim will not protect the screen from any drop to a rock or any edge, and create a false sense of protection.
The case may feel a little loose when you first get it. I recommend heat it up with blow dryer then quickly dump it in cold water to tighten it a bit.

Does it affect the camera flash? The cutout looks close to the flash. I had a Kays case that had a similar opening and the flash reflected glare into the photos.

I just bought a similar case from Amazon which I prefer because it's transparent. However, your pics gave me an idea on how to mod the case because I don't like how there is not a cutout for the volume rocker. I started to make this mod today actually, but one of your pics shows me that I should cut further towards the back of the case which will give my fingers proper room to hit the volume rocker instead of having to use my finger nails :good:

Drvylyne said:
I just bought a similar case from Amazon which I prefer because it's transparent. However, your pics gave me an idea on how to mod the case because I don't like how there is not a cutout for the volume rocker. I started to make this mod today actually, but one of your pics shows me that I should cut further towards the back of the case which will give my fingers proper room to hit the volume rocker instead of having to use my finger nails :good:
Click to expand...
Click to collapse
I had a grey transparent case, it was perfect except there were no cut outs. Cutting it wasn't clean so I trashed it.
I'mDan2 said:
Does it affect the camera flash? The cutout looks close to the flash. I had a Kays case that had a similar opening and the flash reflected glare into the photos.
Click to expand...
Click to collapse
No issues with flash
Sent from my HTCONE using xda app-developers app

are other colors available as well ? I'm quite interested in this case

Ordered one for my black One... Is this an easy on/easy off case or is it difficult to remove? I only ask because I ruined my Poetic case trying to take it off because it was so tough to remove.

Seller doesnot ship to India nor UK . Can someone buy it and post it to me ? I will PayPal the money
Sent from my HTC One using xda premium

dx.com/p/protective-soft-silicone-back-case-for-htc-one-m7-black-224757
This looks similar but cheaper
does any one try this?
I am considering this because the one from ebay won't ship to my country

Is this the same case, a few different colors.
EDIT : sorry excludes Germany
http://www.ebay.co.uk/itm/Soft-Sili...sPouches&var=550258949928&hash=item3a82a573fa
John.
riotman said:
are other colors available as well ? I'm quite interested in this case
Click to expand...
Click to collapse

Ringke fusion [crystal clear]

Looked around and didn't see a topic on this new completely clear Ringke Fusion case. I ordered one and I'll post pics and a review once I've gotten it. But had anyone else gotten one and can post pics or let us know what u think about it.
RINGKE FUSION Google Nexus 5 case bumper [CRYSTAL VI... http://www.amazon.com/dp/B00H3OUGI2/ref=cm_sw_r_udp_awd_IVqRsb0ET5J07
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
>^.^< Sent From Meow G2

Spigen also seems to have released a clear bordered version of their Ultra Hybrid. I'll want to see theses pictures for sure, and how it feels in hand / what material they use for it.

Nice
Looks a great cover. I bought the standard fusion in black, but this one seems great in showing off the sides of the phone. But, I am worried that the side body of the cover will also get scratchy just like the back after a while..
Here, the black side body wins for me.. :good:

khanna27rahul said:
Looks a great cover. I bought the standard fusion in black, but this one seems great in showing off the sides of the phone. But, I am worried that the side body of the cover will also get scratchy just like the back after a while..
Here, the black side body wins for me.. :good:
Click to expand...
Click to collapse
Nope youre incorrect the side is TPU it wont get scratched like the back.

Nice case jeff
Sent from my Nexus 5 using Tapatalk

gavin-phelan said:
Nice case jeff
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
>^.^< Sent From Meow nexus5

did you finally get the case?
how does it look?
I'm between this and the black one... which one dou you think that will be look better with a black nexus?

I just got this case for my RED Nexus 5 and really really like this case. Buttons work much better with this case than my all TPU clear case. Still very slim and fitment is perfect.
Love how it shows off my new phone!!

jeffvb9 said:
I just got this case for my RED Nexus 5 and really really like this case. Buttons work much better with this case than my all TPU clear case. Still very slim and fitment is perfect.
Love how it shows off my new phone!!
Click to expand...
Click to collapse
really?
would you post some photo/s?

You'll need to buy a new one soon as they rapidly turn yellow. Mine looked great for about a month.

cambotero said:
really?
would you post some photo/s?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=50633230&postcount=194

buttons are pretty awesome on this case. I like it, but ordered knock off Google bumper that should get here soon. I'm not really into the clear hard plastic backs. Feels very light and thin though for a good amount of protection.
For reference I've had:
Spigen ultra slim
Quick sand
Beetle case
Diztronic matte
Cruzerlite
Nillkin
I like this one the best I think. Nillkin is pretty sleek though..
Sent from my Nexus 5

Caelrie said:
You'll need to buy a new one soon as they rapidly turn yellow. Mine looked great for about a month.
Click to expand...
Click to collapse
Very true

No clear/transparent cases to reveal the back?

Ordered a moto X this week (Navy back, white front and silver case...can't find a transparent hard case that shows the back...all cases so far seem to be opaque. The diztronic one has a matte finish..Any pointers?

seshsud said:
Ordered a moto X this week (Navy back, white front and silver case...can't find a transparent hard case that shows the back...all cases so far seem to be opaque. The diztronic one has a matte finish..Any pointers?
Click to expand...
Click to collapse
Motorola.com. They have 5 different kinds of clear cases. How hard did you look?
http://www.motorola.com/us/accessories-cases-covers/

eyc said:
Motorola.com. They have 5 different kinds of clear cases. How hard did you look?
http://www.motorola.com/us/accessories-cases-covers/
Click to expand...
Click to collapse
I did, they are expensive....nothing close to $10ish...

seshsud said:
I did, they are expensive....nothing close to $10ish...
Click to expand...
Click to collapse
You could try this one:
http://www.amazon.com/Minisuit-Ultr...=1386219791&sr=8-5&keywords=moto+x+clear+case
It was $4 a couple days ago
I can't personally speak for that one, but I can for these:
http://www.amazon.com/Cruzerlite-Bu...=1387406862&sr=8-1&keywords=cruzerlite+moto+x
http://www.amazon.com/Cruzerlite-Ex...=1387406862&sr=8-7&keywords=cruzerlite+moto+x
Only the symbols/lines and sides are completely transparent, but I thought they looked nice with the custom backs. They are also very snug and solid. So tight, in fact, that you need to be very careful putting it on if you have a screen protector.
Also, it's B2G1 on those.

carock said:
You could try this one:
http://www.amazon.com/Minisuit-Ultr...=1386219791&sr=8-5&keywords=moto+x+clear+case
It was $4 a couple days ago
I can't personally speak for that one, but I can for these:
http://www.amazon.com/Cruzerlite-Bu...=1387406862&sr=8-1&keywords=cruzerlite+moto+x
http://www.amazon.com/Cruzerlite-Ex...=1387406862&sr=8-7&keywords=cruzerlite+moto+x
Only the symbols/lines and sides are completely transparent, but I thought they looked nice with the custom backs. They are also very snug and solid. So tight, in fact, that you need to be very careful putting it on if you have a screen protector.
Also, it's B2G1 on those.
Click to expand...
Click to collapse
http://www.amazon.com/Griffin-GB38037-Reveal-Case-Motorola/dp/B00EI7CX1A
its not $10 but for the extra $9 its worth it haha I have this and the trident cyclops (beast)

Power support ones are very nice... Both the hybrid fusion style one and the hard shell. Love their screen protectors too. Worth the money for a good case.
Sent from my XT1053 using XDA Premium 4 mobile app

Jayrod1980 said:
Power support ones are very nice... Both the hybrid fusion style one and the hard shell. Love their screen protectors too. Worth the money for a good case.
Sent from my XT1053 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Can you still feel the dimple on back with this case?
Sent from my XT1056 using Tapatalk

I bought this one. http://www.ebay.com/itm/370933503359 Looks pretty good. I had really wanted a clear TPU case but i cant find any that do not have the frosted look to them

gochiefs said:
I bought this one. http://www.ebay.com/itm/370933503359 Looks pretty good. I had really wanted a clear TPU case but i cant find any that do not have the frosted look to them
Click to expand...
Click to collapse
Thanks I ordered this. hopefully it will provide good protection too besides being transparent and show off the Moto X...we'll see...

gochiefs said:
I bought this one. http://www.ebay.com/itm/370933503359 Looks pretty good. I had really wanted a clear TPU case but i cant find any that do not have the frosted look to them
Click to expand...
Click to collapse
Could you upload a picture?

Air Jacket is clean and shows off the back and our corporate logo perfect.
Good protection have dropped 2 times both glass 1st and back 1st no damage.
Plus the side case edge matched the Moto X choice great for the buttons and camera ring.
You can feel the dimple on the phone as that part of the case is open.
Power Supply was a little slow to respond on questions on there FB page but very happy with the product!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I bought one from Ebay and it is okay. The price was less than $5. Since I am a new member, I can't post outside links but it is called " Moto X Clear Slim TPU".

I decided not to use a case on mine. I am using a pouch and I'll use the bumper on occasion. My ideal case is a matte bumper with clear button covers.

SUPCASE
I just bought a SUPCASE and love it for the extra protection over my Bear Motion one. Both on Amazon. The SUPCASE has a clear back with black edges. Perfect for showing off the Moto X Dev Ed Black with White back if you ask me.

seshsud said:
Thanks I ordered this. hopefully it will provide good protection too besides being transparent and show off the Moto X...we'll see...
Click to expand...
Click to collapse
Bad decision, got this case..installed it...but it seemed to have an odd effect on google now...ie the response was poor..so tried taking the case man...it was so painful...

I received my power supply air jacket case today. I like it a lot. The fit is perfect. I wish the back were more grippy, but the edges are just grippy enough.
Moto X using Tapatalk

There are at least 5-10 on eBay that are hard clear cases. I bought two different ones for $3 each. Look harder!

MIME USA vs. Power Support Screens

I got the "shock absorbing" screen protector from Motorola by Power Support, while it was nice it was plastic. So it didn't feel the same, fit on the device nice...but it still had a "tacky" feel like ZAGG if you've ever tried those. I've used it a few weeks, held up nice, just didn't like the feeling.
Here are some images of it installed:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
As soon as I found out MIME USA was getting one, I contacted them. I got it yesterday & installed it, instantly fell in love. Fits on device like a glove, no more "tacky" feeling screen on my device. There is 2 small "bubbles" on top/bottom right side on the device, hopefully with time they go away. Also, I think there's a small lint in the middle of the screen, hopefully it doesn't bother me too much.
Here are some images of it installed:
Overall both are awesome screen protectors, but the glass on the MIME USA will always win me over. If you have any questions about it let me know & I will do my best to answer them
Here's a small gallery of both screen protectors with/without cases http://imgur.com/a/9gBCx

I'm surprised there was no questions or anything, I saw a lot of posts on the other thread.
Sent from my XT1060 using Tapatalk

WinDroidGuy said:
I got the "shock absorbing" screen protector from Motorola by Power Support, while it was nice it was plastic. So it didn't feel the same, fit on the device nice...but it still had a "tacky" feel like ZAGG if you've ever tried those. I've used it a few weeks, held up nice, just didn't like the feeling.
Here are some images of it installed:
As soon as I found out MIME USA was getting one, I contacted them. I got it yesterday & installed it, instantly fell in love. Fits on device like a glove, no more "tacky" feeling screen on my device. There is 2 small "bubbles" on top/bottom right side on the device, hopefully with time they go away. Also, I think there's a small lint in the middle of the screen, hopefully it doesn't bother me too much.
Here are some images of it installed:
Overall both are awesome screen protectors, but the glass on the MIME USA will always win me over. If you have any questions about it let me know & I will do my best to answer them
Here's a small gallery of both screen protectors with/without cases http://imgur.com/a/9gBCx
Click to expand...
Click to collapse
Out of curiosity, what kind of case are you using?

ijeenyus said:
Out of curiosity, what kind of case are you using?
Click to expand...
Click to collapse
The Air Jacket from Power Support
Sent from my XT1060 using Tapatalk

Thanks for the pictures! I'm waiting for mine to come in the mail still. Glad o see that it is nice.

GBpfan95 said:
Thanks for the pictures! I'm waiting for mine to come in the mail still. Glad o see that it is nice.
Click to expand...
Click to collapse
It's an awesome screen protector for sure
Sent from my Nexus 7 using Tapatalk

Nice pictures and comparison. That is disappointing to hear about the PS shock absorbing version that you used. My PowerSupport Brilliant is definitely not what I would describe as tacky.

8_8 said:
Nice pictures and comparison. That is disappointing to hear about the PS shock absorbing version that you used. My PowerSupport Brilliant is definitely not what I would describe as tacky.
Click to expand...
Click to collapse
My finger wouldn't slide as easily as it does now, otherwise it was an awesome screen protector. It would also miss some taps, so that was a bummer
Sent from my XT1060 using Tapatalk

WinDroidGuy said:
The Air Jacket from Power Support
Sent from my XT1060 using Tapatalk
Click to expand...
Click to collapse
That's an Air Jacket Grip. The Air Jacket is completely clear, and doesn't cover the top/bottom or the buttons.

Can you get us a picture from the side of the phone without a case on so we can see how far the protector protrudes from the glass surround?

nhizzat said:
Can you get us a picture from the side of the phone without a case on so we can see how far the protector protrudes from the glass surround?
Click to expand...
Click to collapse
If you look in the album there's a few there

WinDroidGuy said:
If you look in the album there's a few there
Click to expand...
Click to collapse
Thanks! Seems to protrude no more than the protectors from Moto's site.
In the MIME specific thread, several members are complaining about poor fitment. Looking at the pics in your album, fitment seems to be spot on.

nhizzat said:
Thanks! Seems to protrude no more than the protectors from Moto's site.
In the MIME specific thread, several members are complaining about poor fitment. Looking at the pics in your album, fitment seems to be spot on.
Click to expand...
Click to collapse
You really can't see it from the pictures. I'm not saying "Don't get one", but unless you have a bulker case, in my situation--a Supcase--then it won't work that well.