Picked up one of these cases from ebay;
http://www.ebay.ca/itm/180931774909?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#ht_1503wt_770
and I have to say it, for what it's made for, is great! Now, I don't drop my phone a whole heck of a lot, so I wasn't looking for something to protect it against constant drops. What I wanted was something to protect the back/sides against scratches/nicks when it is in my pocket. And this does exactly that. It's super thin, which is noticeable when coming from other cases. The fact that it is opaque means that the design of the phone is pretty much intact. Which is great for this phone, since it is quite good looking to begin with. One added bonus, the case does have a very small lip to it which protects the screen when putting the phone down, face down.
If you are looking for an inexpensive case to do the basics(protect from scratches, minor drops, look good, have all buttons/ports easily accessible), then I would suggest this case.
any pictures of your s3 with it? the ebay pics aren't cutting it for me
does it cover the entire bottom of the phone?
leak73 said:
Picked up one of these cases from ebay;
http://www.ebay.ca/itm/180931774909?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#ht_1503wt_770
and I have to say it, for what it's made for, is great! Now, I don't drop my phone a whole heck of a lot, so I wasn't looking for something to protect it against constant drops. What I wanted was something to protect the back/sides against scratches/nicks when it is in my pocket. And this does exactly that. It's super thin, which is noticeable when coming from other cases. The fact that it is opaque means that the design of the phone is pretty much intact. Which is great for this phone, since it is quite good looking to begin with. One added bonus, the case does have a very small lip to it which protects the screen when putting the phone down, face down.
If you are looking for an inexpensive case to do the basics(protect from scratches, minor drops, look good, have all buttons/ports easily accessible), then I would suggest this case.
Click to expand...
Click to collapse
FYI:
opaque: Not able to be seen through; not transparent.
transparent: Allowing light to pass through so that objects behind can be distinctly seen.
this case is semitransparent to get technical.. not opaque.
http://www.ebay.com/sch/i.html?_sacat=0&_nkw=galaxy s3 case 0.3&_sop=15
leak73 said:
Picked up one of these cases from ebay;
http://www.ebay.ca/itm/180931774909?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#ht_1503wt_770
and I have to say it, for what it's made for, is great! Now, I don't drop my phone a whole heck of a lot, so I wasn't looking for something to protect it against constant drops. What I wanted was something to protect the back/sides against scratches/nicks when it is in my pocket. And this does exactly that. It's super thin, which is noticeable when coming from other cases. The fact that it is opaque means that the design of the phone is pretty much intact. Which is great for this phone, since it is quite good looking to begin with. One added bonus, the case does have a very small lip to it which protects the screen when putting the phone down, face down.
If you are looking for an inexpensive case to do the basics(protect from scratches, minor drops, look good, have all buttons/ports easily accessible), then I would suggest this case.
Click to expand...
Click to collapse
What is the feel of the case? Is it plastic or is it frosted or matte-like?
Thank you
aly19 said:
What is the feel of the case? Is it plastic or is it frosted or matte-like?
Thank you
Click to expand...
Click to collapse
it feels plasticky frosted
Sent from my SGH-T999
Any pictures?
Sent from my SGH-T999 using xda app-developers app
i got two of them too!
bought a double package on ebay, including one white and one black.
the cut outs are perfect, the fit is awesome perfect too!
got a white s3 and put the black ultra thin skin on it, looks so awesome.
shuiguo said:
In fact buy Mobile Accessories cheap each web site have, for me or for himself that he like, I buy's hard-core Scrub Shining Series Case Skin
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
what?
NoOneCanHelpMe said:
what?
Click to expand...
Click to collapse
lol. My reaction exactly. Sorry for laughing.
NoOneCanHelpMe said:
what?
Click to expand...
Click to collapse
Probably used Google translate
Sent from my SCH-I535 using xda app-developers app
Related
just curious of any real high quality cases. I have the innocase active right now and love it, but kinda wanting something a little thinner and less bulky and i know how the iphone has some very stylish, classy leather style cases, wood cases etc...
here you go
http://stores.ebay.com/Monster-Acce...011QQ_sidZ62112801QQ_trksidZp4634Q2ec0Q2em322
Can't get more high class than pink flowers diamond bling cases.
yeah those are interesting, just i would love to see (and i highly doubt it) like wooden cases. really nice leather cases.
I was going to suggest Vaja but their website doesn't show anything for the EVO as yet.
yeah went to the site, unfortunately nothing for evo. but thats something im looking for
whatsitsnamenow said:
Can't get more high class than pink flowers diamond bling cases.
Click to expand...
Click to collapse
my wife has this lol
samrozzi said:
just curious of any real high quality cases. I have the innocase active right now and love it, but kinda wanting something a little thinner and less bulky
Click to expand...
Click to collapse
I gave up my innocase for this. It's very thin, sometimes I forget its there. It protects the camera lens. Feels high quality and comes w/a free screen protector.
http://www.case-mate.com/HTC-EVO-4G-Cases/Case-Mate-HTC-EVO-4G-Barely-There-Cases.asp
i actully saw a customer come into my sprint store i workat with that case, it is pretty nice and slim. VERRRY slim. idk. i guess im askign for tooo much lol. would just love a reallly rich, classy, leather case or something
Idk, I don't think the market has matured enough with EVO's to warrant smaller companies making expensive cases for the Evo. I'd wait a few months before expecting anything like this.
http://www.amazon.com/High-Quality-SlimLine-Tough-Case-Phone/dp/B003TTQ4A4/ref=sr_1_6?ie=UTF8&s=electronics&qid=1281692420&sr=8-6
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
That one's nice. Kinda like a 1956 Hotpoint refrigerator.
akastixx said:
http://www.amazon.com/High-Quality-SlimLine-Tough-Case-Phone/dp/B003TTQ4A4/ref=sr_1_6?ie=UTF8&s=electronics&qid=1281692420&sr=8-6
Click to expand...
Click to collapse
I had that case and it is really nice AT FIRST. But just a little warning, if you live in a warm place like Florida(i do), then the glue holding that white fabric on will actually unstick and the fabric just starts falling off and peeling away. I really liked it before that though.
This guy on Ebay has really great reviews on other Android forums. He makes custom Leather cases for Evos.
Here are some of the different styles: http://bit.ly/aUofn1
Kongax said:
I had that case and it is really nice AT FIRST. But just a little warning, if you live in a warm place like Florida(i do), then the glue holding that white fabric on will actually unstick and the fabric just starts falling off and peeling away. I really liked it before that though.
Click to expand...
Click to collapse
you had better get some super glue. i wouldn't waste the money you put into it buy buying something else. i thought it looked sweet, but it's not my style.
great customizable leather cases
Check out fortte.com
rutter9 said:
Click to expand...
Click to collapse
omg thank you very much! thats the superest really classy high quality case i've been looking for!
michd43 said:
I gave up my innocase for this. It's very thin, sometimes I forget its there. It protects the camera lens. Feels high quality and comes w/a free screen protector.
Case-Mate case
Click to expand...
Click to collapse
How does this case do with the camera lens? Does the camera lens stick out past the case? Does it have a rubbery feel at all? I'm trying to find a nice hard case that will protect the camera lens and work with my ghost armor.
awesome is as awesome does!!
one word...... OTTERBOX
Which cases/bumpers provide minor drop protection without adding bulk? Anything less bulky than TPU?
clninja said:
Incipio Feather is now available !
I just ordered mine
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.incipio.com/Samsung-Gala...-S-III-feather-Ultralight-Hard-Shell-Case.asp
Click to expand...
Click to collapse
here you go
clninja said:
here you go
Click to expand...
Click to collapse
Excellent! Ordered!
But if it fell, there isn't anything to absorb shock, no? I figured a bumper would provide good protection because if it fell, the actual phone would never touch the floor and there isn't extra bulk added
Sent from my HTC One S using Tapatalk 2
exactly not every piece of phone is protected! try some 0.9mm thin silicon from ebay...this will not protect your phone ...
http://www.amazon.com/Amzer-AMZ9396..._1_7?s=wireless&ie=UTF8&qid=1339253840&sr=1-7
Anyone have that one?
Case mate "Barely there". Not much for protection but it doesn't add much bulk but will help for minor fumbles. If you wanted a case that would hold up from chest high drops, a minimal no bulk case isn't what anyone should be looking for anyway. I have the barely there on my thunderbolt and it has been very nice. For aonyone like me that doesn't drop there phone but wants a little more protection than a skin, the case mate option is great.
hah2110 said:
http://www.amazon.com/Amzer-AMZ9396..._1_7?s=wireless&ie=UTF8&qid=1339253840&sr=1-7
Anyone have that one?
Click to expand...
Click to collapse
Are you kidding same same all the same, the whole upper edge is exposed!!! no more protection than one in 2nd post...
I have the official Samsung TPU, it doesn't add that much bulk at all.
http://www.mobilefun.co.uk/samsung-galaxy-s3-tpu-case-clear-samgsvtpucl-p35370.htm
Search Tridea on EBay. They have some slick looking covers that I'm looking into purchasing. Just have to wait until payday
BungeBash said:
Search Tridea on EBay. They have some slick looking covers that I'm looking into purchasing. Just have to wait until payday
Click to expand...
Click to collapse
Man, they look nice (some of them), but they look massive as well... Not the kind of things that one would say "doesn't add bulk".
The allke is not too bad, still... I may end up getting one
Not out yet, but this case looks to be good; minimal but also offering good protection
http://www.goballisticcase.com/products/samsung-galaxy-s-iii-ballistic-life-style-smooth-series-case
http://www.mobilefun.co.uk/crystal-case-for-samsung-galaxy-s3-p35478.htm
Its barely visible and clear, just the way I like it. Why hide the beautiful back of the case with another colour. Shame have to wait
kidd78 said:
http://www.mobilefun.co.uk/crystal-case-for-samsung-galaxy-s3-p35478.htm
Its barely visible and clear, just the way I like it. Why hide the beautiful back of the case with another colour. Shame have to wait
Click to expand...
Click to collapse
Looks nice, though I wish it covered the top of the device.
http://www.mobilefun.co.uk/genuine-samsung-s3-slim-case-white-efc-1g6swec-twin-pack-p35227.htm
These look really thin and would offer mild protection from minor slips and falls.
Buy a good casing to protect your SIII
Hi Guys,
just want to share my unfortunate event happened to my 8days old SIII.
To make story short I drop my S III on a hard surface, face down ( average height est 0.5 meter). Pick it up, heart dropped a moment. Display cracked. I had all this while put on screen protector as well as casing. Unfortunately.It does not do it job well. Went to Samsung service Ctr. Off course warranty not covered, Damage done USD$220 for replacement of entire front panel.
So my advice to you guys. Especially if you have occasionally butter fingers like I do. Get a good casing to protect your new S III.
Got the barely there case. Not much protection. Especially on the front where it is needed. Nice and sexy case.
http://www.amazon.com/gp/product/B0089E283G
This "Composite Poly-carbonate shell" Case looks pretty cool.
hboos said:
http://www.mobilefun.co.uk/genuine-samsung-s3-slim-case-white-efc-1g6swec-twin-pack-p35227.htm
These look really thin and would offer mild protection from minor slips and falls.
Click to expand...
Click to collapse
I like this case, wish it come with black color
I Dig that! I might have to order this one.
---------- Post added at 06:10 AM ---------- Previous post was at 06:08 AM ----------
FWIW Drew...here it is in blue...
http://www.mobilefun.co.uk/genuine-samsung-s3-slim-case-blue-efc-1g6sbec-twin-pack-p35225.htm
There are many hard cases on the market and most feel like hard plastic shells. This case actually feels like rubber with the stiffness of plastic. It just feels like quality. It also manages to come about 1/4 of an inch further on the bottom and top to cover more area. The cutouts around the power and volume rockers are recessed which make a world of difference when pushing the already almost flush buttons. It also give extremely good grip. I dropped my first galaxy s3 with a casemate on it and that case didn't have any bottom or top protection and my phone suffered. I posted a picture of the damage and the casemate. If it were in the rearth it would have survived without a scratch. I can't say enough how good this case feels in the hand. Its a really slick phone and it needs a grippy case.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Glad to hear a good review. I ordered one of these for my preordered S3.:fingers-crossed:
I ordered this, the casemate barely there, the Nilkin hard case, and I bought an Affinity smoke glass hardshell from Bestbuy that I was planning to return once I got one of the cases I ordered but boy does it look nice. I might keep it. It looks gorgeous.
Is there any angle that would hit the bottom or top edge if you dropped it? like facing 45 degrees forward?
Tazer2death said:
Is there any angle that would hit the bottom or top edge if you dropped it? like facing 45 degrees forward?
Click to expand...
Click to collapse
No there isn't unless it falls on a squared edge. Plus the rubbery coating gives extra protection.
if i ever buy a hardcase for my galaxy it will be this one.
glad to hear it works well.
Wow. After this case came, on the website they are giving away lanyard strap with it.......
could you post some pics of the phone with the case on it?
Thanks
Had the Slim on my SII and my Note. Absolutely loved them.
If I had a III this would be the case for me without a doubt.
It's a shame that they don't have any plans to release one for the One X.
Sent from my HTC One X
Ordered one last night. Never used a case on my Epic 4G but that's because they were a pain to find. Looks thin enough which was my only concern. Didn't want to add on a lot of extra bulk. Thanks
jitz said:
could you post some pics of the phone with the case on it?
Thanks
Click to expand...
Click to collapse
I could but they wouldn't do any justice to the pics on the rearth website.
I bought one of these for my Note. For the $30 I paid for it, I expected more. Why they don't make the plastic go all the way around the bezel is beyond me. I will pass on this one for the S3.
I think it would be fragile, that the reason no cases manufacturer makes a case like this with the bottom and the top covered.
Just ordered mine, thanks for the recommendation.
It took me a while though as I could not find a slime case!
)
Is there a link for these cases Google isn't bringing up anything
http://www.google.ie/webhp?sourceid....2,or.r_gc.r_pw.r_qf.,cf.osb&biw=1366&bih=643
Looks nice but for me cases with volume/power cut outs just feel awkward to me. I much prefer the built in buttons
jonny68 said:
Is there a link for these cases Google isn't bringing up anything
http://www.google.ie/webhp?sourceid....2,or.r_gc.r_pw.r_qf.,cf.osb&biw=1366&bih=643
Click to expand...
Click to collapse
Maybe try to search for slim case. But if you really want slime then keep looking...
Sent from my GT-I9300 using Tapatalk 2
@falconeight thanks for the suggestion. just ordered from their official site. they're offering free 2-3 day shipping. it can't come soon enough. i'm so stressed that something bad will happen to my new baby!
http://www.rearthusa.com/galaxy_s3_ringke_case
i think it's the size of the phone. large, but thin, that makes me feel like it will not take a fall very gracefully. fingers crossed until the case arrives.
oh also, in case anyone is having problems googling the case... it's Rearth Ringke Slim (the OP is missing a "g" and added the "e" in slime LOL)
This is an advertisement, not a review.
Got my Ringke Slim the other day. Similar to my Galaxy Nexus one, except it doesn't protect the top and bottom and it doesn't come with a screen protector or rubber port protectors. Overall I love it though, very thin. But after receiving my ROCK case, I'll probably use that more often. If you're looking for something that will make it look like you don't have a case on it, this is it.
For the past six months, I've been searching and waiting for the perfect bumper and I think I've finally found it. The other bumpers like Draco and Tedoori have button cutouts that kill the symmetry of the phone's lines. Bumpers like Spigen are plastic and just look terrible.
The one made by Luardi is slim and has nice curves that won't kill the S3's nice curves. I have yet to see someone review it here so :I will post one when I get it.
What do you guys think?
Link:
http://www.luardi.com/slim-aluminum-bumper-252.html
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Way too expensive. But looks nice. I hope it has front and back lips so it may help protect the f and b.
Sent from my GT-I9300 using xda app-developers app
+1
Looks great, but way to expensive
Wouldn't exactly say that's anywhere near "Way too expensive". Considering other aluminum bumpers like the Draco Design's one is nearly double the price....
Actually, it's on sale on eBay and you can pick it up for $40. Still pricey but not bad. Hope it's worth it.
Does anyone know things will work with the metal back covers that are on Amazon , if so I'll buy one.
Sent from my SPH-L710 using xda app-developers app
Metal backs will distort NFC but phone signal is not really affected that much unless your normal signal is bad to begin with.
Looks nice, if it didn't have the grip parts I might consider it.
Overall doesn't seem expensive IMHO
Anyone received theirs yet?
Sent from my SGH-T999 using xda app-developers app
Mine has arrived but stuck in the mailroom until tomorrow. I'll let you guys know as soon as I get it.
please comment on the signal w case on vs case off
jinosong said:
Mine has arrived but stuck in the mailroom until tomorrow. I'll let you guys know as soon as I get it.
Click to expand...
Click to collapse
So how is it? Any pictures?
i'm curious, too. Thinking about possibly getting one of these, or Luardi's leather wallet case... i'd prefer staying with something that doesn't increase the bulk of the phone, but also curious about how installing the phone in Luardi's aluminum bumpers goes.
Just ordered mine
Ordered mine from ebag through Amazon for $37. First time it came the case did not look anything like the picture. It was probably a knockoff. Called Ebag and they assured me it was probably mis-packaged my employee so I'm ordering another one.
The attached picture shows the one they sent me. Just a case with a cut out for the buttons.
Pictures
After some crazy Fedex routing, I finally got my bumper. At first, I glance, I was disappointed, because I got the same case as previously mentioned from eBags via Amazon (http://www.amazon.com/Luardi-Aluminum-Bumper-Samsung-Galaxy/dp/B00ANWLUO0/). But then when I opened it up more, I realized that this was in fact the aluminum bumper, it just doesn't match the picture that Luardi / Amazon / eBags posted on their order page.
The case is more subdued than in the advertised pictures and the bumps along the size are less pronounced (I prefer that). The one thing they did design-wise was to make the top portion a thin plastic inset to hold the phone in the bumper. It seems to work, but makes the case feel cheaper. It could be that this design allows the bumper to be less bulky without additional securing closures. It looks pretty good, but it isn't as solid as I had hoped, it will creak and flex slightly when squeezed, particularly along the bottom where the plastic inset can be released.
I took some pictures and posted them on dropbox:
https://www.dropbox.com/sh/agfy6zj9tk1prni/ceJKB08chh
Let me know if there are any other angles that you want me to take.
I am trying out the case to see whether I am going to keep it. I suspect that Amazon / eBags would still authorize the return since it clearly doesn't match what they are advertising.
Digging the finger grips
Looks cool. I wonder if it's equivalent to Draco bumpers
Are there any options out there that wont cause me to loose the beauty of the device, I need to protect it but like the feel of the metal in my hands...
I just got this today - http://www.ebay.com/itm/330949139388, crystal clear. Doesn't really add that much bulk and the clear case definitely preserves the beauty of the phone.
Get a metal bumper. Phone still looks beautiful and it protects the sides from a fall.
Sent from my HTC6500LVW using Tapatalk
I cannot find a photo of the front, does it have a lip to protect the screen.
John.
gdemore said:
I just got this today - http://www.ebay.com/itm/330949139388, crystal clear. Doesn't really add that much bulk and the clear case definitely preserves the beauty of the phone.
Click to expand...
Click to collapse
supcase via amazon. cheap and looks good. not going to be an otterbox, but will prevent little dings and everyday scratches. my only gripe is volume buttons hard to press, but can be fixed a bit by cutting out button areas of case.
Slickwraps. It's the best solution. I have a black carbon fiber skin with an anti-glare screen protector and it works great.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Prophet16 said:
Slickwraps. It's the best solution. I have a black carbon fiber skin with an anti-glare screen protector and it works great.
View attachment 2447158
Click to expand...
Click to collapse
What ROM/Theme/laucher is that? Lol.
TriBeard said:
What ROM/Theme/laucher is that? Lol.
Click to expand...
Click to collapse
looks like action launcher w/ dashclock widget on expanded desktop mode.
...watch me be completely off lol. the case reminds me of the kevlar on the droid razr, interesting.
Hey, any advice on a durable but aesthetically appealing case. Thanks.
Sent from my One using xda premium
Adharsh101 said:
Hey, any advice on a durable but aesthetically appealing case. Thanks.
Sent from my One using xda premium
Click to expand...
Click to collapse
I personally think the Devilcase Aluminum bumper is a pretty good alternative. I really liked the look of the One but I'm pretty clumsy and I have a tendency to drop my phones so I got the bumper. I've dropped it a few times but the phone has held up quite nicely without any signs of damage. Oh I also have a glass screen protector for the front though, just in case.
syllogyking said:
looks like action launcher w/ dashclock widget on expanded desktop mode.
...watch me be completely off lol. the case reminds me of the kevlar on the droid razr, interesting.
Click to expand...
Click to collapse
You're exactly right lol. It's Action Launcher Pro with DashClock widget.
is it just me or is this same post in all 5 HTC One Forums ?
Do the metal bumper block signal? the phone is already nearly all metal besides the side
This is what I've got on my phone at the moment. Quite minimalistic and good build quality.
ebay dot co dot uk/itm/HTC-One-M7-Sexy-Ultra-Slim-Fit-Case-Thin-Cover-/300965752062
I've attached some photos of it. Check 'em out.
View attachment 2452755
View attachment 2452756
View attachment 2452757
View attachment 2452758
Incipio Frequency
Before, i had Belkin Grip Sheer Matte /still have it/, and thought it's super thin TPU. Now the Incipio, it's much much thinner and feel of device is more "real".
Althought it's very very thin, it provides some protection for camera lens and everyday scratches. Volume buttons are maybe little stiff - but i only own this for one week, and they are becoming easier to press or I am getting used to it.
Highly recommended.
How much did it run you?
Blue one Kk ecliptic one by hawknest
best advice is get a sleeve
kingbor1cua said:
How much did it run you?
Blue one Kk ecliptic one by hawknest
Click to expand...
Click to collapse
It costed me 18,75 USD + 7,99 USD (International shipping to Slovakia). Extremly fast shipping.
This is a solution / idea, i came up with yesterday.
Your phone remains naked, while camera is slightly raised from table.
What do you think ?
The clear one might look better.
John.