Any help would be greatly appreciated.
I added a few build.prop tweaks to my Verizon SCH-I435 S4 mini and apparently it did not like it.
Now it will not boot past S4 mini screen.
The phone is rooted via kingo, xposed framework installed with Wanam tweaks
Everything is stock with some bloatware frozen via My backup Pro.
I did do a system dump prior to these issues, so I do have the stock build.prop
Any one know of a way to replace the build.prop?
You probably didn't give build.prop the right permissions when you replaced it. That's the worst I could think you can do if that's what you did just fix if you have access and try again.
Sent from my SCH-I435 using xda app-developers app
justlovejoy said:
You probably didn't give build.prop the right permissions when you replaced it. That's the worst I could think you can do if that's what you did just fix if you have access and try again.
Sent from my SCH-I435 using xda app-developers app
Click to expand...
Click to collapse
Cant boot, Just will have to wait for firmware.
Tried everything I can.
Have you tried putting the phone is safe mode? I'm not positive it will work but its supposed to put all settings back to stock temporarily. To enter safe mode remove and reinsert battery then push and hold the volume down and power button until phone boots to the home screen. You must hold the volume and power completely through both the Verizon and Samsung boot screens otherwise the phone with try to boot as normal.
hellrose1228 said:
Have you tried putting the phone is safe mode? I'm not positive it will work but its supposed to put all settings back to stock temporarily. To enter safe mode remove and reinsert battery then push and hold the volume down and power button until phone boots to the home screen. You must hold the volume and power completely through both the Verizon and Samsung boot screens otherwise the phone with try to boot as normal.
Click to expand...
Click to collapse
Thanks, Yes I did Still no go.
I have tried everything that I know possably even the new update and throws error "system/build.prop\" has unexpected contents".
I got a replacement through warranty so its just been a very costly mistake.
just gonna wait for firmware i Guess.
Yeah its that build.prop is it 755 permissions? I think if I had your phone I'd unbrick it. Your build.prop is what's causing it in my opinion. A brick is a completely dead device you're soft bricked it turns on? You're golden if you fix that build.prop I'd say.
Sent from my SCH-I435 using Tapatalk
justlovejoy said:
Yeah its that build.prop is it 755 permissions? I think if I had your phone I'd unbrick it. Your build.prop is what's causing it in my opinion. A brick is a completely dead device you're soft bricked it turns on? You're golden if you fix that build.prop I'd say.
Sent from my SCH-I435 using Tapatalk
Click to expand...
Click to collapse
Yes, I know thats what is is. I need to replace it with the original.
It will boot to stock recovery (with the padlock icon) and download mode but wont let me do anything without errors
Do you know of a way?
Solved
Thanks @Chris-M.
used VZW software to repair.
Also was able to pull the I435VRUAMK5 firmware that the software download.
can post if anyone is interested. Havent tried it with oden.
Here is the name of it
"COMBINATION_I435VRUAMK5_I435VZWAMK5_2145735_REV06_user_low_ship_MULTI_CERT.tar.md5" 1.67GB file
Can I have the firmware file. I messed up my mini by deleting a file. It will not boot pass the verizon.
Thanks.
triple5 said:
Can I have the firmware file. I messed up my mini by deleting a file. It will not boot pass the verizon.
Thanks.
Click to expand...
Click to collapse
http://www.androidfilehost.com/?fid=23269279319199780
I'm not sure this will work with oden (I did not try) but if you have the verizon software installed,you can do a repair but it will erase everything.
Let my know, i can upload the VZW software also.
If you don't mine..
Can you upload the vzw software also....Thanks
triple5 said:
If you don't mine..
Can you upload the vzw software also....Thanks
Click to expand...
Click to collapse
sure here
http://www.androidfilehost.com/?fid=23269279319200837
The VZW software keep giving me an error #3. But I used odin and it did the job.
Everything working now..Thanks for your Help..
HAPPY NEW YEAR!!!
So do i put this in pda? Can you kindly give me instructions on how to flash this via odin, i really dont want to brick my new phone. Thanks in advance.
Hi guys.
Soft bricked today.
I downloaded your files to my Mac (Heindall, I might use Odin on my PC).
Can you walk me through the Odin steps?
RobinDean said:
Hi guys.
Soft bricked today.
I downloaded your files to my Mac (Heindall, I might use Odin on my PC).
Can you walk me through the Odin steps?
Click to expand...
Click to collapse
Odin is pretty easy the file goes in pda. I suggest using Kies to restore your phone. Should be easy as plugging in and choosing to restore it. Soft brick? That needs to be explained more.
Sent from my SCH-I435 using Tapatalk
I figured it out. A simple Google search for "how to flash with Odin" and some careful selection did the trick.
By "soft bricked", I mean that the phone would power on and display the Samsung logo but, beyond that, it was useless.
Switching to download mode, flash stock firmware and rebuilding my settings solved it.
what?
RobinDean said:
I figured it out. A simple Google search for "how to flash with Odin" and some careful selection did the trick.
By "soft bricked", I mean that the phone would power on and display the Samsung logo but, beyond that, it was useless.
Switching to download mode, flash stock firmware and rebuilding my settings solved it.
Click to expand...
Click to collapse
I apologize I left out in a funk the other day.
Still working on it but yes always research first. Awesome.
taghdim said:
what?
Click to expand...
Click to collapse
What phone do you have?
Sent from my SCH-I435 using Tapatalk
Does the software repair assistant basically flash stock rom for you or do you have to repair and then also use ODIN?
Related
So I managed to Brick my sprint version of the galaxy s3. Like an idiot I overlooked a rom and used the i9300 version instead of my model version(nood move). Anyway I can't turn my phone on AT ALL!! I tried putting in into download and recovery and I get nothing. How do i fix this?? Anyone???
If u can't get download mode or recovery than there is no help. Maybe a jig if u have one but I'm not sure if they even work for the s3.
Sent from Galaxy SIII
musclehead84 said:
If u can't get download mode or recovery than there is no help. Maybe a jig if u have one but I'm not sure if they even work for the s3.
Sent from Galaxy SIII
Click to expand...
Click to collapse
Ahhhh shyt! These new phones are harder to fix now, never had this problem before, but its like if mess up once with these new galaxy s3's thats it, whats the point of flashing roms when you chance it every time. Thanks though man looks like I'll have to call to get a new one.
jsmoof21 said:
Ahhhh shyt! These new phones are harder to fix now, never had this problem before, but its like if mess up once with these new galaxy s3's thats it, whats the point of flashing roms when you chance it every time. Thanks though man looks like I'll have to call to get a new one.
Click to expand...
Click to collapse
Its not a problem as long as you flash a rom FOR YOUR PHONE.....
Did you try this?
jsmoof21 said:
So I managed to Brick my sprint version of the galaxy s3. Like an idiot I overlooked a rom and used the i9300 version instead of my model version(nood move). Anyway I can't turn my phone on AT ALL!! I tried putting in into download and recovery and I get nothing. How do i fix this?? Anyone???
Click to expand...
Click to collapse
I thought I hard brick my sons phone and here is what I did: Worth a try at this point.
Take battery out and do NOT put it back in. Take SD card out. Plug phone into computer and attempt download mode. Mine booted right up with this method when it wouldn't with anything else. If it does flash the stock rom through Odin right away and you are good to go.
tyler1037 said:
I thought I hard brick my sons phone and here is what I did: Worth a try at this point.
Take battery out and do NOT put it back in. Take SD card out. Plug phone into computer and attempt download mode. Mine booted right up with this method when it wouldn't with anything else. If it does flash the stock rom through Odin right away and you are good to go.
Click to expand...
Click to collapse
I just tried that and no luck. sounds like u soft bricked it. I can't get it to turn on period. The only thing that turns on is the lcd light but only for 10 seconds then shuts off. Thanks for the help though!
If your getting a light, even temporary, I'd boot a tinycore Linux and see what mode its in for that 10 seconds
18th.abn said:
If your getting a light, even temporary, I'd boot a tinycore Linux and see what mode its in for that 10 seconds
Click to expand...
Click to collapse
I gave up an ordered a new one lol that's the only solution I could come up with
galaxy s3 softbrick
jsmoof21 said:
I gave up an ordered a new one lol that's the only solution I could come up with
Click to expand...
Click to collapse
hey jsmoof21 did you got you galaxy s3 back from sprint, im asking because my is softbrick and i need to know if i can bring mine to sprint and getting a replacement because my dont start up eather. thanks
bonao1851 said:
hey jsmoof21 did you got you galaxy s3 back from sprint, im asking because my is softbrick and i need to know if i can bring mine to sprint and getting a replacement because my dont start up eather. thanks
Click to expand...
Click to collapse
Do you get a screen at all? You say you're softbricked but you also say it doesnt start up. If you are really just softbricked then you have a screen too, in which case you'll just look like an ass going to sprint because they will see you fuucked with it and laugh you out the store. If you are hardbricked then you would have just a black screen. If you have a screen, do some reading like you shouldve done in the first place and fix it yourself.
bonao1851 said:
hey jsmoof21 did you got you galaxy s3 back from sprint, im asking because my is softbrick and i need to know if i can bring mine to sprint and getting a replacement because my dont start up eather. thanks
Click to expand...
Click to collapse
Mine was hard bricked and it couldn't be turned on period. If yours is soft brick then you should be able to get it back into download mode but you can't get it to turn on at all, then you have a hard brick. I went to sprint and got a brand new one because they couldn't fix it either. So unless they can fix it you will have to get a new one!
Also Hard Bricked.
18th.abn said:
If your getting a light, even temporary, I'd boot a tinycore Linux and see what mode its in for that 10 seconds
Click to expand...
Click to collapse
On the advice for taking the battery out and trying to get into download mode, I tried and now without my battery in I get my red light but still no luck on download mode. any advice like "tinylinux". Sorry not a noob but not a pro so whereever that middle area is is where I stand. Thanks in advance.
UNBRICK
Hi please follow these steps
1 download stock firmware below
http://forum.xda-developers.com/showthread.php?t=1737859
2 download clock work mod (CWM-Recovery-LTE-SGS3-Sprint-v5.zip) below
http://www.epiccm.org/2012/06/cwm-recovery-on-all-sgs3-lte-variants.html
3 copy the CWM recovery zip to ext sd card using some card reader trough a pc and insert the sd card into your SGS3.
4 now i still presume your phone is still booting but gets stuck at samsung boot screen. reboot to ODIN mode and flash the
CWM file downloaded earlier with "AUTOREBOOT" unchecked.
5 once the cwm is flashed remove the usb cable and remove battery, hold for a sec and put the battery back again.
6 Reboot to recovery VOL UP + HOME Button + POWER, you should boot to CWM.
7 do DATA WIPE 3 times
8 do CACHE WIPE 3 times
9 under advanced do DALVIK CAHCE WIPE 3 times
10 click on reboot, as soon as you do it the vibrates, remove battery as soon as it vibrates.
11 put the battery back again and boot to odin mode again
12 flash stock firmware with F.RESET and AUTO REBOOT checked
13 your phone should reboot,
14 wait for it
please let me know if it helped.
Please do as it says without step number 3
pvinodnayak said:
Hi please follow these steps
1 download stock firmware below
http://forum.xda-developers.com/showthread.php?t=1737859
2 download clock work mod (CWM-Recovery-LTE-SGS3-Sprint-v5.zip) below
http://www.epiccm.org/2012/06/cwm-recovery-on-all-sgs3-lte-variants.html
3 copy the CWM recovery zip to ext sd card using some card reader trough a pc and insert the sd card into your SGS3.
4 now i still presume your phone is still booting but gets stuck at samsung boot screen. reboot to ODIN mode and flash the
CWM file downloaded earlier with "AUTOREBOOT" unchecked.
5 once the cwm is flashed remove the usb cable and remove battery, hold for a sec and put the battery back again.
6 Reboot to recovery VOL UP + HOME Button + POWER, you should boot to CWM.
7 do DATA WIPE 3 times
8 do CACHE WIPE 3 times
9 under advanced do DALVIK CAHCE WIPE 3 times
10 click on reboot, as soon as you do it the vibrates, remove battery as soon as it vibrates.
11 put the battery back again and boot to odin mode again
12 flash stock firmware with F.RESET and AUTO REBOOT checked
13 your phone should reboot,
14 wait for it
please let me know if it helped.
Please do as it says without step number 3
Click to expand...
Click to collapse
DUDE THANK YOU SO MUCH OMG
I had same stuck at boot screen but could get odin download mode still this literally saved my phone thanks your awesome!
I Screwed Up
Hello All,
I wish my first post was not for the issue of a bricked phone but it seems like it might be.
I have the sprint samsung S3 and was installing the http://forum.xda-developers.com/showthread.php?t=1905676 Rom and something seems to not have gone right.
I got an error and when I went to restart my phone I get nothing...
Thanks for the help and if I have no options would anyone like to by a lovely almost new GS3?
Jonathan
jonathanod said:
Hello All,
I wish my first post was not for the issue of a bricked phone but it seems like it might be.
I have the sprint samsung S3 and was installing the http://forum.xda-developers.com/showthread.php?t=1905676 Rom and something seems to not have gone right.
I got an error and when I went to restart my phone I get nothing...
Thanks for the help and if I have no options would anyone like to by a lovely almost new GS3?
Jonathan
Click to expand...
Click to collapse
I think you may have flashed your Sprint GS3 with an international GSM GS3 ROM. I think you are not going to be able to recover from that.
m20120 said:
I think you may have flashed your Sprint GS3 with an international GSM GS3 ROM. I think you are not going to be able to recover from that.
Click to expand...
Click to collapse
why are people still doing this?
nicholaaaas said:
why are people still doing this?
Click to expand...
Click to collapse
Some people really should get an iPhone...
Sent from my SPH-L710 using xda app-developers app
WHYDavid said:
Some people really should get an iPhone...
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Totally agree.That or a motorola
Try YouTubeing QBKing77 on his video for bricked S3's
Good luck. There will be a way to unbrick. Just have to find the right method.
[JellyBombed S3 via XDA premium]
Hello.. So today I attempted to flash a new version of TWRP for installing cleanrom and it bricked my phone. I can get into download mode though
So using ODIN i've been trying to install custom recoveries. Everytime it says pass, but I cannot get a recovery to show up. If I hold up, power and home buttons, the Galaxy note 2 will flash (as if its about to load a recovery) but then just goes back to galaxy note 2 screen. I can still make it to download mode, but cannot seem to get anywhere else.
Also, currently there is no rom on my phone.
Please help!
Thanks,
AC
AC2020x said:
Hello.. So today I attempted to flash a new version of TWRP for installing cleanrom and it bricked my phone. I can get into download mode though
So using ODIN i've been trying to install custom recoveries. Everytime it says pass, but I cannot get a recovery to show up. If I hold up, power and home buttons, the Galaxy note 2 will flash (as if its about to load a recovery) but then just goes back to galaxy note 2 screen. I can still make it to download mode, but cannot seem to get anywhere else.
Also, currently there is no rom on my phone.
Please help!
Thanks,
AC
Click to expand...
Click to collapse
Maybe use odin to start over fresh? Is the recovery separate from the kernel in the Note II?
Sent from my Apple IIe
billyjed said:
Maybe use odin to start over fresh? Is the recovery separate from the kernel in the Note II?
Sent from my Apple IIe
Click to expand...
Click to collapse
I think it is separate. The last thing I had was beanstalk with neak kernel. Then I wiped everything (not sure if that affect kernel or not) to prepare for cleanrom.
How do I use odin to start fresh?
Thanks!
AC2020x said:
I think it is separate. The last thing I had was beanstalk with neak kernel. Then I wiped everything (not sure if that affect kernel or not) to prepare for cleanrom.
How do I use odin to start fresh?
Thanks!
Click to expand...
Click to collapse
Install a factory image (probably with root and custom recovery) then proceed to flash whatever from there.
Sent from my Apple IIe
billyjed said:
Install a factory image (probably with root and custom recovery) then proceed to flash whatever from there.
Sent from my Apple IIe
Click to expand...
Click to collapse
Okay thanks,
I will have to try this after work. This may be a stupid question, but if anyone knows a good location where I can find this that would be really helpful.
I can search around for it more later.
Thanks
I bet Google knows.
Sent from my Apple IIe
SamMobile is a great site for firmwares.
After the screen turns on, let go of power and continue to hold up and home. Try it out.
johntortorella said:
SamMobile is a great site for firmwares.
Click to expand...
Click to collapse
mertin said:
After the screen turns on, let go of power and continue to hold up and home. Try it out.
Click to expand...
Click to collapse
Thanks.. I'm downloading from Sam Mobile now on my laptop at work.
And thanks for the tip. I will try this out as soon as I get home. I really hope my phone isn't pertinently bricked!
AC2020x said:
Thanks.. I'm downloading from Sam Mobile now on my laptop at work.
And thanks for the tip. I will try this out as soon as I get home. I really hope my phone isn't pertinently bricked!
Click to expand...
Click to collapse
If you need something to follow, this will help too.
Link
when you're "bricked" that means you can NOT get into download mode, so you are NOT bricked....
wase4711 said:
when you're "bricked" that means you can NOT get into download mode, so you are NOT bricked....
Click to expand...
Click to collapse
Oh sorry, I wasn't sure what the term bricked actually encompassed. I guess I was stuck in bootloop then.
Well, good and bad news. I got out of the bootloop, and finally got twrp installed on my phone. I did a recovery of beanstalk and also a fresh install of cleanrom. While they boot, they both have been going extremely slowly. Also just loading into recovery is taking super long. I don't know why. I am also not getting any signal, I can however connect to wifi. Anyone have any ideas or any thoughts on how to fix this?
Thanks again!
hey
if you can get into download mode try this find your provider and phone model and download the firware the nice thing this has root already installed so then you can just download goo and install twrp easy i always use this
http://forum.xda-developers.com/showthread.php?t=2004650
make sure you read it all so you have no problems all done with odin make sure you double check the check mark boxes well read and you will know what i am talking about
bigtomcat said:
if you can get into download mode try this find your provider and phone model and download the firware the nice thing this has root already installed so then you can just download goo and install twrp easy i always use this
http://forum.xda-developers.com/showthread.php?t=2004650
make sure you read it all so you have no problems all done with odin make sure you double check the check mark boxes well read and you will know what i am talking about
Click to expand...
Click to collapse
Just tried it out and it had the same problem. installed with ODIN no problem, but I still have no signal and it is still running very choppy.
When I go to mobile networks in settings it tells me "Insert SIM card to access network services" I have a sim and have tried reinserting it multiple times. I don't know whats going on. Also, it seems I do not have any internal storage. It says 200mb in storage that are fully used. When I have cleared everything but the rom.
I may attempt to return the phone tomorrow.
hey
AC2020x said:
Just tried it out and it had the same problem. installed with ODIN no problem, but I still have no signal and it is still running very choppy.
When I go to mobile networks in settings it tells me "Insert SIM card to access network services" I have a sim and have tried reinserting it multiple times. I don't know whats going on. Also, it seems I do not have any internal storage. It says 200mb in storage that are fully used. When I have cleared everything but the rom.
I may attempt to return the phone tomorrow.
Click to expand...
Click to collapse
nope a lot of people have that problem you have to remove your sim card and sd card and flash again then reboot i have seen people do this 3 times to clear all the bad flashes stuck on there phones make sure to factory reset too after by being off then hold down home power and volume up when you see the words pop up let go of all but volume up get into the system setting there factory all and restart then once you give it about 10 min put you sim card and sd card back and before wipe the sd card it has been know to cause some problems if that all doesn't work then ya maybe there is something else
good luck
I'm pretty sure I made a rookie mistake and I'm facing the conscience. Last night I was need of rooting my phone (at&t galaxy note II i317) using Kongo Android to get superUS and everything was going fine, I still had all my stuff, service and everything, so I decided to add a custom ROM (cm-10.1.3-tOlteatt), wiped everything and I ended up in a bad situation, I forgot to back up my phone so I lost all of my contacts, lost my service provider so I have no signal, and can't download any apps because I don't have play store. . . If anyone knows to way to help solve this PLEASE HELP ME. . . all I want to do now is find a way to uninstall all this rooted stuff and go back to my regular functioning galaxy s note II
THANK YOU FOR THE HELP IN ADVANCE
Check here for help:thumbup::
http://forum.xda-developers.com/showthread.php?p=49616709
You can also look here:
http://forum.xda-developers.com/showthread.php?p=41340941
And you should have used this for your rooting needs...
http://forum.xda-developers.com/showthread.php?p=33854391
And from the sounds of it, you downloaded the wrong Rom for your phone! And it's always bad skiing stuff late when we're tired. That's when we run into problems. It's called late night flashing
Sent from my SAMSUNG-SGH-I317 using Tapatalk
ViiRuZ said:
I'm pretty sure I made a rookie mistake and I'm facing the conscience. Last night I was need of rooting my phone (at&t galaxy note II i317) using Kongo Android to get superUS and everything was going fine, I still had all my stuff, service and everything, so I decided to add a custom ROM (cm-10.1.3-tOlteatt), wiped everything and I ended up in a bad situation, I forgot to back up my phone so I lost all of my contacts, lost my service provider so I have no signal, and can't download any apps because I don't have play store. . . If anyone knows to way to help solve this PLEASE HELP ME. . . all I want to do now is find a way to uninstall all this rooted stuff and go back to my regular functioning galaxy s note II
THANK YOU FOR THE HELP IN ADVANCE
Click to expand...
Click to collapse
Let's turn the frown upside down..... How's it going ??
Bajanman said:
Check here for help:thumbup::
http://forum.xda-developers.com/showthread.php?p=49616709
You can also look here:
http://forum.xda-developers.com/showthread.php?p=41340941
And you should have used this for your rooting needs...
http://forum.xda-developers.com/showthread.php?p=33854391
And from the sounds of it, you downloaded the wrong Rom for your phone! And it's always bad skiing stuff late when we're tired. That's when we run into problems. It's called late night flashing
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
Thanks for the recommendation but I've previously tried the method, but my phone always failed to download (even when it wasnt rooted) would u have any other way of solving it without having to use odin. . . my phone is currently stuck in recovery mode so any help trying to get out of it would be helpful. .thank you for your time helping me solve my issue
Put the correct ROM on your external sd card with a PC adaptor. Install the card, boot into recovery, wipe system and data, then install the correct ROM. Boot, let rhe phone settle in for a few minutes, connect to wifi, or check if the correct ROM has the at&t APN settings.
ViiRuZ said:
Thanks for the recommendation but I've previously tried the method, but my phone always failed to download (even when it wasnt rooted) would u have any other way of solving it without having to use odin. . . my phone is currently stuck in recovery mode so any help trying to get out of it would be helpful. .thank you for your time helping me solve my issue
Click to expand...
Click to collapse
Ranger is correct, try doing what he suggested.
But not really understanding what you have tried from your post.....
Which method, and what does fail to download?
Do you mean fail to get into download mode, and you only can get into recovery?
Are you doing this to get to download mode?
Put your Note 2 in Download Mode
-First you will need to turn off your device.
-Once it’s off, you need to press this button combination: volume down, power button and home button.
-Keep them pressed until the download mode shows up.
-Once you’re there, you will be required to press volume up to enter the download mode or volume down to cancel and reboot the device.
Obviously you want to press the volume up. Now you are ready to ODIN flash.
rangercaptain said:
Put the correct ROM on your external sd card with a PC adaptor. Install the card, boot into recovery, wipe system and data, then install the correct ROM. Boot, let rhe phone settle in for a few minutes, connect to wifi, or check if the correct ROM has the at&t APN settings.
Click to expand...
Click to collapse
i will be sure to try this method whenever i get my hands on an SD card adaptor. What ROM would be best to download for the correct at&t APN settings? i would look but my past luck has been failure.
Thank you for your help
dicksteele said:
Ranger is correct, try doing what he suggested.
But not really understanding what you have tried from your post.....
Which method, and what does fail to download?
Do you mean fail to get into download mode, and you only can get into recovery?
Are you doing this to get to download mode?
Put your Note 2 in Download Mode
-First you will need to turn off your device.
-Once it’s off, you need to press this button combination: volume down, power button and home button.
-Keep them pressed until the download mode shows up.
-Once you’re there, you will be required to press volume up to enter the download mode or volume down to cancel and reboot the device.
Obviously you want to press the volume up. Now you are ready to ODIN flash.
Click to expand...
Click to collapse
i would have tried ODIN for this situation but everytime i do. It says "FAILED" how would you suggest i fix this so that my phone can use ODIN. I was going from cyanogenMod to a custom ROM, but i assume i didnt flash the old ROM and now i kinda stuck in a bootloop like it'll show the samsung intro then show the customROM emblem stays there. I've left it in that state for a whole night and it didnt change (still showing the custom ROM emblem) the only thing i can do is enter TWRP v2.6.3.1 and access my external SD.
ViiRuZ said:
i would have tried ODIN for this situation but everytime i do. It says "FAILED" how would you suggest i fix this so that my phone can use ODIN. I was going from cyanogenMod to a custom ROM, but i assume i didnt flash the old ROM and now i kinda stuck in a bootloop like it'll show the samsung intro then show the customROM emblem stays there. I've left it in that state for a whole night and it didnt change (still showing the custom ROM emblem) the only thing i can do is enter TWRP v2.6.3.1 and access my external SD.
Click to expand...
Click to collapse
I don't understand this ....... It says "FAILED" What is failing ?
What are you flashing?
dicksteele said:
I don't understand this ....... It says "FAILED" What is failing ?
What are you flashing?
Click to expand...
Click to collapse
Sorry bout that. . just tried to connect my phone to ODIN in ODIN MODE. I'll update with what happened.
Just got done trying to flash with ODIN, and it got the part where it starts to install but 4 mins. in my device was removed. I was using the PDA from sammobile.com, and now my phone is saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." i know it might be as simple as actually doing what it says but Kies will not recognize my At&t samsung galaxy note II. What would u suggest to let my laptop recognize my device??
rangercaptain said:
Put the correct ROM on your external sd card with a PC adaptor. Install the card, boot into recovery, wipe system and data, then install the correct ROM. Boot, let rhe phone settle in for a few minutes, connect to wifi, or check if the correct ROM has the at&t APN settings.
Click to expand...
Click to collapse
Thank you for your time helping me with my phone issue. I took the steps you suggested, now im running custom ROM jellybean 4.1.1. and got my service provider back. If you could suggest away to get my stock program and upgrade to jellybean 4.3. I had fun with the rooted life but i make the worst mistakes.
PS. i found it to be alot easier using the other tar. in the firmware u suggested me to use. At least for At&t Samsung Galaxy Note II
rangercaptain said:
Put the correct ROM on your external sd card with a PC adaptor. Install the card, boot into recovery, wipe system and data, then install the correct ROM. Boot, let rhe phone settle in for a few minutes, connect to wifi, or check if the correct ROM has the at&t APN settings.
Click to expand...
Click to collapse
So i just flashed my at&t Samsung galaxy note II with jellybean 4.1.1 using Odin ( ATT_I317UCAMA4_I317ATTAMA4) and it was going on with everything working. Then i tried to update to jellybean 4.3 after it got done installing it rebooted, and what do u know, i'm stuck in boot loop the Samsung galaxy note 2 logo, and cant access recovery mode. Also I tried the original firmware that used repeatedly,would that hurt the system. Would there be any firmwares suggested to use.
ViiRuZ said:
So i just flashed my at&t Samsung galaxy note II with jellybean 4.1.1 using Odin ( ATT_I317UCAMA4_I317ATTAMA4) and it was going on with everything working. Then i tried to update to jellybean 4.3 after it got done installing it rebooted, and what do u know, i'm stuck in boot loop the Samsung galaxy note 2 logo, and cant access recovery mode. Also I tried the original firmware that used repeatedly,would that hurt the system. Would there be any firmwares suggested to use.
Click to expand...
Click to collapse
So you did the OTA update to 4.3?
I've been where you are lots of times....
Try post #2 from here
http://forum.xda-developers.com/showthread.php?t=2618447
dicksteele said:
So you did the OTA update to 4.3?
I've been where you are lots of times....
Try post #2 from here
http://forum.xda-developers.com/showthread.php?t=2618447
Click to expand...
Click to collapse
yes it updated and installed but after it installed and rebooted its in
a constant boot loop. Is this going to be a simple permanent fix?
ViiRuZ said:
yes it updated and installed but after it installed and rebooted its in
a constant boot loop. Is this going to be a simple permanent fix?
Click to expand...
Click to collapse
Yes
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
dicksteele said:
So you did the OTA update to 4.3?
I've been where you are lots of times....
Try post #2 from here
http://forum.xda-developers.com/showthread.php?t=2618447
Click to expand...
Click to collapse
Thank you for your help, i honestly do thank you. Its good that people like you are out there and are helpful enough to guides us (the ones who mess up)
ViiRuZ said:
Thank you for your help, i honestly do thank you. Its good that people like you are out there and are helpful enough to guides us (the ones who mess up)
Click to expand...
Click to collapse
Not a problem. Just giving back from all the help I've received over the years,
Alright guys and girls - I need your help. I had a weird issue come up yesterday, and I'm trying to figure out how to go forward. My phone ran low on battery and died, so I plugged it in to charge like normal. Today, I tried to boot, but can't. I can boot into recovery ok, but that's it. If I boot to download mode, it only gives me a few seconds before the screen goes black. If I try to connect to the PC to flash through Odin, it doesn't recognize as a USB device. However, if I boot to recovery and mount the phone as a usb device, it recognizes and I can get into the external sd card no problem. Also, if I try to just boot normally into system, it boots to the Samsung boot screen and then goes black.
My question is - did I some how brick, or is something else going on? I'd hate to go through all the steps of unbricking if that isn't what I'm dealing with. Thanks in advance.
Have you already tried flashing a ROM via sideload/sdcard?
eduardog131 said:
Have you already tried flashing a ROM via sideload/sdcard?
Click to expand...
Click to collapse
I didn't try a new rom, but I did try a backup that I know works. Let me give it a shot with a re-flash of the rom I have. I'd like to see if I could find a zip that will flash a full stock Tmo rom, but from what I am reading, it doesn't flash all the bits and pieces like Odin.
EDIT: No go - tried a rom re-flash (wiped clean), but still won't boot to system or download mode.
koz said:
I didn't try a new rom, but I did try a backup that I know works. Let me give it a shot with a re-flash of the rom I have. I'd like to see if I could find a zip that will flash a full stock Tmo rom, but from what I am reading, it doesn't flash all the bits and pieces like Odin.
EDIT: No go - tried a rom re-flash (wiped clean), but still won't boot to system or download mode.
Click to expand...
Click to collapse
Try doing the unbrick method. That might work if nothing else works.
Im not 100 percent sure because im not an expert by anymeans but it could be a motherboard but my guess is just as hood as anyone elses
Sent from my SAMSUNG-SGH-T999 using XDA Premium 4 mobile app
You are not hard bricked, so debricking won't help.
First thing, remove and put your battery back in. Does it try to boot on its own? If so it's a faulty power switch.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
DocHoliday77 said:
You are not hard bricked, so debricking won't help.
First thing, remove and put your battery back in. Does it try to boot on its own? If so it's a faulty power switch.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
Yeah, tried debricking, but no go. Yes, if I pull the battery & reinstall it, the phone tries to re-boot, but it only gets to the Samsung logo, then goes black. Still think it's a faulty power switch? If so, any idea where I can get one new, or just cannibalize an Ebay phone?
EDIT: I found a Youtube about someone that had something that sounded similar. One of the comments recommended "flicking the power button with your finger about 10 or so times & it should turn on". Tried it, and yep, turned on. Guess after all this it's the power button. Thanks, Doc!
Earlier this evening, after texting a friend, my phone rebooted itself.
It appears to be in a boot loop. It will only reboot into rebooting. Never loads Android. I pulled the battery, let it sit for a few minutes, and tried again with no results.
I've not done modding to the phone (mainly because its locked), and will be returning it to my local AT&T store tomorrow. Thankfully I have insurance on my phone, so I shouldn't have an issue getting a new one.
Anybody else had this issue, however? It's really strange.
Majin Kaioh said:
Earlier this evening, after texting a friend, my phone rebooted itself.
It appears to be in a boot loop. It will only reboot into rebooting. Never loads Android. I pulled the battery, let it sit for a few minutes, and tried again with no results.
I've done modding to the phone (mainly because its locked), and will be returning it to my local AT&T store tomorrow. Thankfully I have insurance on my phone, so I shouldn't have an issue getting a new one.
Anybody else had this issue, however? It's really strange.
Click to expand...
Click to collapse
Read a guide on flashing back to stock. Use ODiN and flash the stock file of your choice in the ATT note 4 forum from Download mode. Google how to boot into download mode. Hold those buttons until phone powers off then keep holding until you see download mode. You will need to install samsung drivers and for ODiN on Windows go to Devices coms and ports and change port to 3 in advanced tab.
sudoBacon said:
Read a guide on flashing back to stock. Use ODiN and flash the stock file of your choice in the ATT note 4 forum from Download mode. Google how to boot into download mode. Hold those buttons until phone powers off then keep holding until you see download mode. You will need to install samsung drivers and for ODiN on Windows go to Devices coms and ports and change port to 3 in advanced tab.
Click to expand...
Click to collapse
I updated my post to add in a missing word. I havn't done any modding. I do not intend to do any flashing to the device.
I'll be returning it to AT&T tomorrow and getting a new one. My question was if anyone has had this issue before. Thanks for your response. Unfortunately, does not address my question.
sudoBacon said:
Read a guide on flashing back to stock. Use ODiN and flash the stock file of your choice in the ATT note 4 forum from Download mode. Google how to boot into download mode. Hold those buttons until phone powers off then keep holding until you see download mode. You will need to install samsung drivers and for ODiN on Windows go to Devices coms and ports and change port to 3 in advanced tab.
Click to expand...
Click to collapse
I have had my share of boot looping experiences, never from not doing any type of experiments with my devices. nonetheless myself and I'm sure many other people just do what was mentioned in the quote to alleviate that problem.
i know you (OP) mentioned you don't plan on doing any flashing, but i would do that before using insurance personally, even if there was no deductible
Majin Kaioh said:
I updated my post to add in a missing word. I havn't done any modding. I do not intend to do any flashing to the device.
I'll be returning it to AT&T tomorrow and getting a new one. My question was if anyone has had this issue before. Thanks for your response. Unfortunately, does not address my question.
Click to expand...
Click to collapse
This process is not dangerous if your phone is in a bootloop. Hell AT&T or whatever carrier probably does this themselves if a phone is in this kind of situation. If not rooted or any mods you will still have OTA updates. If you are worried about carrier recognizing if you modded it or something and they wont take it back dont worry just flash it using ODiN. I've rooted many devices hacked compiled roms flashed them and kernels s-offed etc. You can always get back to stock remove flags and your carrier will take it back no matter what just dont return a device with the actual mods on it.
Why not just try to reset the device from the recovery menu? If it's a stock phone it should fix the bootloop.
Sent from my SAMSUNG-SM-N910A using XDA Free mobile app
jack man said:
Why not just try to reset the device from the recovery menu? If it's a stock phone it should fix the bootloop.
Sent from my SAMSUNG-SM-N910A using XDA Free mobile app
Click to expand...
Click to collapse
It won't fix what sounds like a missing or corrupted boot file, had to deal with it on a LG g3.. restoring a full back up or a plain reset had no effect.. it was either doing a full flash or flashing the boot files
for that phone it would randomly happen when the OTA tried to upgrade the device while it was rooted, took me 3 times of dealing with it before I realized OTA was still live
Small update. My local AT&T store has a replacement being sent to me. I'm unhappy, however, since its apparently a refurbished device. I pay for insurance that covers a new device if something, anything, happens. They're refusing to send me a new one for some reason that they won't explicitly state to me.
My loyalty with AT&T has wavered, and I will probably be on another network in coming months. I'm thinking Sprint so that I can least have an unlocked Note 4.
Regardless, since this device is being sent back, I decided to try and Odin flash it anyways. It did not work. Still boot loops at the Note 4/Android screen. Doesn't even load the AT&T logo. I'm fairly certain something is fundamentally broken with the device. Probably a factory error. It's never been dropped, and has been inside a hard case since day one.
Being that it is a manufacturing error, I'm not to angry about that. These things do happen. AT&T's treatment of me, however, is just unacceptable. I've been a customer for about eight years, and have been on Android since the Motorola Backflip. I upgraded to a Samsung Captivate and never looked at another manufacturor.
Are you able boot to the recovery menu?
Sent from my SAMSUNG-SM-N910A using XDA Free mobile app
i have the bootloop issue before to put *#9090#
the loop is every aprox 3 mins
some sugestion?¡
sudoBacon said:
This process is not dangerous if your phone is in a bootloop. Hell AT&T or whatever carrier probably does this themselves if a phone is in this kind of situation. If not rooted or any mods you will still have OTA updates. If you are worried about carrier recognizing if you modded it or something and they wont take it back dont worry just flash it using ODiN. I've rooted many devices hacked compiled roms flashed them and kernels s-offed etc. You can always get back to stock remove flags and your carrier will take it back no matter what just dont return a device with the actual mods on it.
Click to expand...
Click to collapse
Good evening,
my n910A is stocked in Bootlop ,
I did try also to flash via odin the 4 zipped md5 files from this forum but nothing changed : http://forum.xda-developers.com/note-4-att/general/to-stock-files-latestcoc4-build-t3107391
when I press volume up+power+home it show LRX22C.N910AUCU1COC4 but the version on the label of my box is N910AUCU1ANIE ,
I don't know if I should go back to the previous version and how to do it ?????
or something else??????
please help because I am lost
thanks
thepinkpanter said:
Good evening,
my n910A is stocked in Bootlop ,
I did try also to flash via odin the 4 zipped md5 files from this forum but nothing changed : http://forum.xda-developers.com/note-4-att/general/to-stock-files-latestcoc4-build-t3107391
when I press volume up+power+home it show LRX22C.N910AUCU1COC4 but the version on the label of my box is N910AUCU1ANIE ,
I don't know if I should go back to the previous version and how to do it ?????
or something else??????
please help because I am lost
thanks
Click to expand...
Click to collapse
Try downloading one of sunderwares stock firmwares in a newer 3.10 odin after extracting the zip with contained files. I recommend latest OC4 just re flash it a different one or try again
sudoBacon said:
Try downloading one of sunderwares stock firmwares in a newer 3.10 odin after extracting the zip with contained files. I recommend latest OC4 just re flash it a different one or try again
Click to expand...
Click to collapse
I already did it but by using Odin 3.09 pls. see http://forum.xda-developers.com/note-4-att/general/to-stock-files-latestcoc4-build-t3107391/page5
maybe I did something wrong
or from where can I get / download a different N910AUCU1COC4 ?
thanks again for your kind help