Related
Do you guys know if they have tethering? Also, do themes and all that work with this phone too? Or just the ROMS granted that I install a T-mobile kernel.
whytechapel_x said:
Do you guys know if they have tethering? Also, do themes and all that work with this phone too? Or just the ROMS granted that I install a T-mobile kernel.
Click to expand...
Click to collapse
Hi,
I can confirm that with Omega rom teathering worked for me..
but you will lose some T-Mobile features.. (Wifi calling for sure, donno what else)
what i did is:
1. Flash stock T-Mobile
2. Flash CF-AutoRoot
3. Flash TWRP Recovery
4. Boot the phone and copy Tmboile's kernel + Omega rom to internal sdcard
5. boot into recovery
6. Wiped to factory reset + wiped cache
7. flashed Omega
8. flashed kernel
9. reboot
worked great for me + LTE (Where i had LTE signal)
Edit:
I Had Tmobile's Unlimited pack with Unlimited LTE and -No- tethering..
DxCx said:
Hi,
I can confirm that with Omega rom teathering worked for me..
but you will lose some T-Mobile features.. (Wifi calling for sure, donno what else)
what i did is:
1. Flash stock T-Mobile
2. Flash CF-AutoRoot
3. Flash TWRP Recovery
4. Boot the phone and copy Tmboile's kernel + Omega rom to internal sdcard
5. boot into recovery
6. Wiped to factory reset + wiped cache
7. flashed Omega
8. flashed kernel
9. reboot
worked great for me + LTE (Where i had LTE signal)
Click to expand...
Click to collapse
Yeah tethering works great! God these international roms kick ass.
Although one problem I have is that when I open the camera it says that it's updating the firmware and it just sits there in it closes and I open it again and it still says that.
whytechapel_x said:
Yeah tethering works great! God these international roms kick ass.
Although one problem I have is that when I open the camera it says that it's updating the firmware and it just sits there in it closes and I open it again and it still says that.
Click to expand...
Click to collapse
yes i've seen this as well.. but i'm able to take pictures so..
probably it will be fixed soon
It went away by flashing Ktoonez kernel!! Although i'm still wondering why it says processing after every shot.
Auto Night Detection was enabled which is why it would process every picture!
Just flashed back to a tmo rom from international. You definitely lose wifi calling and from what I've seen NFC payment is disabled in most deodexed roms due to some issues.
You gain native tethering. Dialer and a few other things are dark color which is nice. And you also gain call recording.
I'm just going to stick it out on a tmo rom for time being and can tether easily with wifi tether app and working NFC payment. I don't use call recording.
Sent from my SGH-M919 using Tapatalk 4 Beta
Hi all, long time lurker and it's finally come to the point where I don't know what to do about my problem.
I've tried running multiple ROMs, CM10, CM11, AOSP, Carbon KK and for some reason, for each of these ROMs, the data doesn't seem to work. I have full reception and everything works well except I can't seem to get any sort of data transfer.
The only time the data works is when I restock the phone back to ATT I747 UCUEMJB stock ontop of installing the Modem CWM I747UCUEMJB.
I'm currently running AOSB Kitkat 1.2.9
Kernel version 3.4.79-cyanogenmod-g29c22cf
Modem CWM I747UCUEMJB
Any thoughts on how I can fix this data problem?
I am also facing this problme. I have only one ROM with working data is unified version for S3 of Illusion Rom. On SCH-R530U
Sent from my SCH-R530U using Tapatalk
AznBorder11 said:
Hi all, long time lurker and it's finally come to the point where I don't know what to do about my problem.
I've tried running multiple ROMs, CM10, CM11, AOSP, Carbon KK and for some reason, for each of these ROMs, the data doesn't seem to work. I have full reception and everything works well except I can't seem to get any sort of data transfer.
The only time the data works is when I restock the phone back to ATT I747 UCUEMJB stock ontop of installing the Modem CWM I747UCUEMJB.
I'm currently running AOSB Kitkat 1.2.9
Kernel version 3.4.79-cyanogenmod-g29c22cf
Modem CWM I747UCUEMJB
Any thoughts on how I can fix this data problem?
Click to expand...
Click to collapse
So I actually got it working and it was a weird fix... I've been using ATT_I747_UCUEMJP_StockRestore_2282014.zip to bring it back to stock and then using the rooting system from that stock rom.
My friend suggested to try using another root, so I brough it back to CF-Autoroot and it works. Not sure why... but maybe give it a try if your using that stock rom?
Hey guys,
So i've been reading up on how to install international ROMs on my tmo n900T. I've downloaded all the necessary wifi / network fix files and tmo kernels. However, whenever I try to install either Bobcat ROM or X-Note 13.0, after the Aroma install, everything in my internal SD card gets wiped....every time. This includes the /system folder, which means the phone won't boot.
I've tried both ROMs and it does it. I can install the TMO Jedi ROM just fine, which also uses Aroma. I've also tried to install both those roms from both Philz Touch Recovery and TWRP 2.7.0.0.
Any ideas what could be going wrong?
dirrtyswan said:
Hey guys,
So i've been reading up on how to install international ROMs on my tmo n900T. I've downloaded all the necessary wifi / network fix files and tmo kernels. However, whenever I try to install either Bobcat ROM or X-Note 13.0, after the Aroma install, everything in my internal SD card gets wiped....every time. This includes the /system folder, which means the phone won't boot.
I've tried both ROMs and it does it. I can install the TMO Jedi ROM just fine, which also uses Aroma. I've also tried to install both those roms from both Philz Touch Recovery and TWRP 2.7.0.0.
Any ideas what could be going wrong?
Click to expand...
Click to collapse
I've never tried those roms and Jedi is a great rom but as for using international rom, I am using Omega v12 (4.4.2), everything works, especially native bluetooth tethering (the reason i went International).
Good luck.
kadster007 said:
I've never tried those roms and Jedi is a great rom but as for using international rom, I am using Omega v12 (4.4.2), everything works, especially native bluetooth tethering (the reason i went International).
Good luck.
Click to expand...
Click to collapse
Thanks I might try out that ROM. I did some more research and I think my issue is common for a few international ROMs. I found the reason and some workarounds here:
http://forum.xda-developers.com/showthread.php?t=2490351&page=13
Going to give it a try now.
What exactly needs to be done to get dn3 rom working on the us tmobile note 2? Im having an issue finding the appropriate steps.
1. Be sure you download DN3 for the N7105 or i317
2. If you're not on 4.3 Bootloader then download Devil Kernel or AGNi Kernel (this will help get wifi to work)
3. Download Tmobiles mk7 modem
4. Be sure you're using TWRP or CWM
5. Wipe - System, Data, Dalvik-Cache & Cache
6. Flash DN3 Rom and reboot. (Flashing things over it before its first boot will not alliw it to boot)
7. Flash Kernel and modem.
Thanks. I couldnt find any definitive posts on the process. What kernel do you reccomend?
I'm using Devil but I've heard good things with AGNi.
Hope we get 4.4.2 dn3 soon
one80oneday said:
Hope we get 4.4.2 dn3 soon
Click to expand...
Click to collapse
my mouth is drooling for this
any scoop on it?
Double0EK said:
1. Be sure you download DN3 for the N7105 or i317
2. If you're not on 4.3 Bootloader then download Devil Kernel or AGNi Kernel (this will help get wifi to work)
3. Download Tmobiles mk7 modem
4. Be sure you're using TWRP or CWM
5. Wipe - System, Data, Dalvik-Cache & Cache
6. Flash DN3 Rom and reboot. (Flashing things over it before its first boot will not alliw it to boot)
7. Flash Kernel and modem.
Click to expand...
Click to collapse
Would u recommend the same steps for me? I have a tmobile note 2 and I unrooted it to get it back to 4.1.1 so I could unlock it to use my at&t sim card and everything working great so I rerooted it and now I want to flash the dn3 rom but im not sure what steps I need to take? Would I need abdifferent approach from your recommended steps here?
express21 said:
my mouth is drooling for this
any scoop on it?
Click to expand...
Click to collapse
Soon.
Sent from my NoteII
Does DN3 have all the Tmobile apps like wifi calling and visual voice mail? Does it have Note 3 apps too like the calendar and action memo
edo101 said:
Does DN3 have all the Tmobile apps like wifi calling and visual voice mail? Does it have Note 3 apps too like the calendar and action memo
Click to expand...
Click to collapse
It is not based on a tmo TW rom so WiFi calling is not included.
Hastily spouted for your befuddlement
How is battery life on DN3?
Currently im gettin on my current rom average 16 hours with 3 hours screen and 26 % battery left.
Is this rom up there with these figures?
Thanks in advance.
Cheers
I get 1 day+ 3 hours from 100% charge and im always on wifi so its a great rom and its stable.
I cant wait to get 4.4!
Sent from my SGH-T889
Hey guys. I installed dn3 v3.1.1 LTE yesterday and in aroma, I chose the n7105 install. Everything booted up and I got 4G instantly. After letting it sit for a little, I started using it and experienced a little lag and went ahead and flashed devil kernel 2.3.2. The phone is still lagging at times and had 3 random freezes/restarts. And the blue tooth audio is choppy at times when I'm doing anything else on the phone. Extreme lag at times. I'm coming from jedi X2 and updated my bootloader when I installed jedi.
Any suggestions?
I'm using tmobile note 2
Sent from my GT-N7105 using XDA Free mobile app
desikilla said:
Hey guys. I installed dn3 v3.1.1 LTE yesterday and in aroma, I chose the n7105 install. Everything booted up and I got 4G instantly. After letting it sit for a little, I started using it and experienced a little lag and went ahead and flashed devil kernel 2.3.2. The phone is still lagging at times and had 3 random freezes/restarts. And the blue tooth audio is choppy at times when I'm doing anything else on the phone. Extreme lag at times. I'm coming from jedi X2 and updated my bootloader when I installed jedi.
Any suggestions?
I'm using tmobile note 2
Sent from my GT-N7105 using XDA Free mobile app
Click to expand...
Click to collapse
DN3 is already on KitKat. You should flash that.. you will need to be, atleast, on the 4.1.2 bootloader. Then you can flash AGNi Kernel 4.0
Double0EK said:
DN3 is already on KitKat. You should flash that.. you will need to be, atleast, on the 4.1.2 bootloader. Then you can flash AGNi Kernel 4.0
Click to expand...
Click to collapse
I wish someone would make a youtube tutorial on how to do this...
Really?
Is self explanitory...
Be sure you have at least MD1 bootloader.
1. Download Rom
2. Backup current Rom (optional)
3. Wipe
4. Flash Rom
5. Reboot
6. Setup
7. Reboot back into recovery and flash other options (kernel, modem, superSU...etc)
Double0EK said:
1. Be sure you download DN3 for the N7105 or i317
2. If you're not on 4.3 Bootloader then download Devil Kernel or AGNi Kernel (this will help get wifi to work)
3. Download Tmobiles mk7 modem
4. Be sure you're using TWRP or CWM
5. Wipe - System, Data, Dalvik-Cache & Cache
6. Flash DN3 Rom and reboot. (Flashing things over it before its first boot will not alliw it to boot)
7. Flash Kernel and modem.
Click to expand...
Click to collapse
Does flashing the kernel and modem get the Wi-Fi calling to work? I just wanted to confirm. I am not sure if you were referring to Wi-Fi in general. Thanks.
vandoc said:
Does flashing the kernel and modem get the Wi-Fi calling to work? I just wanted to confirm. I am not sure if you were referring to Wi-Fi in general. Thanks.
Click to expand...
Click to collapse
WiFi in general. You have to be on a T-Mobile stock ROM to use WiFi calling with T-Mobile as already answered on the first page.
am I able to flash this StockMOD Custom ROM 4.3 RLS2.1 for att or tmobile, over my existing stock 4.4.2, my modem as of now is i747UCUFNE4 but the rom description says to flash the 4.3 modem or it wont get data? someone help me out
heres the rom url http://forum.xda-developers.com/showthread.php?t=2504903
do not flash the older modem. just flash the rom and youll be good to go.
DocHoliday77 said:
do not flash the older modem. just flash the rom and youll be good to go.
Click to expand...
Click to collapse
since im coming from stock 4.4.2 do I only wipe cache n dalvik before flashing
You will most likely have to factory reset since you are downgrading.
You can try just wiping dalvik, but if it hangs at boot youll have to factory reset.
one more question
DocHoliday77 said:
You will most likely have to factory reset since you are downgrading.
You can try just wiping dalvik, but if it hangs at boot youll have to factory reset.
Click to expand...
Click to collapse
Thank You I tried wiping cache n dalvik, it hung but I went back in to twrp n wiped cache n dalvik again after install, worked like a charm!!!!!
hank you very much but can you answer me one question is there anyway you or another could port the revolutionary s5 v3 to the i747 it looks so amazing they only have it for the s3 i9300 not the s3 i747
Afaik, porting from tbe i9300 is a pretty difficult process. The device is very different from ours. Not saying it isnt possible, but I dont think we've really ever had any ports from that device.
I wont be able to try as I just have too much on my plate already and not enough time as it is. Sorry....maybe someone else will tackle it....
DocHoliday77 said:
Afaik, porting from tbe i9300 is a pretty difficult process. The device is very different from ours. Not saying it isnt possible, but I dont think we've really ever had any ports from that device.
I wont be able to try as I just have too much on my plate already and not enough time as it is. Sorry....maybe someone else will tackle it....
Click to expand...
Click to collapse
well thank you very much for responding you've been a very patient n helping hand if you could maybe you could pass it around to some of the other developers you are in contact with I know of about 30 people personally that would love to have that on there i747 not counting the people ive seen on here asking for a rom from the s5 but no big deal THANKS AGAIN
I was watching this thread because I had the exact same question. I tried installing the "StockMOD Custom ROM 4.3 RLS2.1" and my S3 wouldn't even boot past the Samsung screen. I left it there for 15 minutes and nothing. I tried wiping dalvik/cache from recovery and then it wouldn't even get that far. From that point on when I tried to reinstall the ROM it would go by and then when it got to the rebooting stage it would tell me "No OS installed. Are you sure you want to reboot?", or something of that nature. I then installed the Deodex Debloat Version from here: http://forum.xda-developers.com/showthread.php?t=2540998 and it installed/booted on the first try. Only problem is that Wi-Fi does not work & not sure of what my next step should be to get Wi-Fi working. I came from 4.4.2 OTA. Should I install the 4.3 modem or try flashing the StockMOD Rom again? I'm confused because it was stated that it didn't need to be installed.
Edit: I installed the StockMOD ROM directly over top without wiping anything and it worked. If I just want the "Deodex Debloat" version should I wipe, reinstall that ROM, then install the 4.3 modem since it didn't work before?
Edit: Second time flashing the Deodex Debloat ROM & Wi-Fi is working but now I have no data/4G. Help! LoL.
plastic_green_head said:
I was watching this thread because I had the exact same question. I tried installing the "StockMOD Custom ROM 4.3 RLS2.1" and my S3 wouldn't even boot past the Samsung screen. I left it there for 15 minutes and nothing. I tried wiping dalvik/cache from recovery and then it wouldn't even get that far. From that point on when I tried to reinstall the ROM it would go by and then when it got to the rebooting stage it would tell me "No OS installed. Are you sure you want to reboot?", or something of that nature. I then installed the Deodex Debloat Version from here: http://forum.xda-developers.com/showthread.php?t=2540998 and it installed/booted on the first try. Only problem is that Wi-Fi does not work & not sure of what my next step should be to get Wi-Fi working. I came from 4.4.2 OTA. Should I install the 4.3 modem or try flashing the StockMOD Rom again? I'm confused because it was stated that it didn't need to be installed.
Edit: I installed the StockMOD ROM directly over top without wiping anything and it worked. If I just want the "Deodex Debloat" version should I wipe, reinstall that ROM, then install the 4.3 modem since it didn't work before?
Edit: Second time flashing the Deodex Debloat ROM & Wi-Fi is working but now I have no data/4G. Help! LoL.
Click to expand...
Click to collapse
if you flashed it without wiping cache n dalvik- dirty flash then it should have worked unless u came from another 4.4.2 rom mine is working fine
correct me if im wrong
If ypu updated to 4.4.2, and then flashed a 4.3 rom, you have to use either the MJ2 or kt747 kernel or wifi wont work.
DocHoliday77 said:
If ypu updated to 4.4.2, and then flashed a 4.3 rom, you have to use either the MJ2 or kt747 kernel or wifi wont work.
Click to expand...
Click to collapse
that's not entirely true im not using either n my wifi is fine im on
kernel 3.0.31.1804024
[email protected]#1
i upgraded ota to 4.4.2 n never flashed any kernel at all
DocHoliday77 said:
If ypu updated to 4.4.2, and then flashed a 4.3 rom, you have to use either the MJ2 or kt747 kernel or wifi wont work.
Click to expand...
Click to collapse
Why exactly will it not work to flash a MJB kernel?
Boston78 said:
that's not entirely true im not using either n my wifi is fine im on
kernel 3.0.31.1804024
[email protected]#1
i upgraded ota to 4.4.2 n never flashed any kernel at all
Click to expand...
Click to collapse
I would get either no wifi or no data depending on which modem was used after flashing the rom.
01 - Via TWRP (2.7.1.0) dirty flash d2att_4.3_MJB_Debloat_Deodex_v1.2.zip
02 - Reboot without wiping cache/dalvik = freeze at AT&T logo
03 - Wipe cache/dalvik = freeze at AT&T logo
04 - Factory Reset = success with the exception of no wifi
05 - Flash MJB modem = Wifi now enabled but no data. (baseband unknown/imei null)
06 - Flash NE4 modem = data/baseband/imei restored, but no wifi again
07 - Flash UCUEMJ2_Insecure_kernel.zip + wipe cache/dalvik & reboot = somplete succcess (wifi+data all working)
At least for my experience Doc is 100% correct. Not sure how you were able to flash the StockMOD ROM without having to flash a kernel. Especially when "How to flash" on the StockMOD page says "5. Flash Kernel (For WiFi)". Not saying you are lying, just that I don't understand why you didn't need to.
Boston78 said:
that's not entirely true im not using either n my wifi is fine im on
kernel 3.0.31.1804024
[email protected]#1
i upgraded ota to 4.4.2 n never flashed any kernel at all
Click to expand...
Click to collapse
Are you using this rom along with the included kernel? Or something different?
plastic_green_head said:
Why exactly will it not work to flash a MJB kernel?
I would get either no wifi or no data depending on which modem was used after flashing the rom.
01 - Via TWRP (2.7.1.0) dirty flash d2att_4.3_MJB_Debloat_Deodex_v1.2.zip
02 - Reboot without wiping cache/dalvik = freeze at AT&T logo
03 - Wipe cache/dalvik = freeze at AT&T logo
04 - Factory Reset = success with the exception of no wifi
05 - Flash MJB modem = Wifi now enabled but no data. (baseband unknown/imei null)
06 - Flash NE4 modem = data/baseband/imei restored, but no wifi again
07 - Flash UCUEMJ2_Insecure_kernel.zip + wipe cache/dalvik & reboot = somplete succcess (wifi+data all working)
At least for my experience Doc is 100% correct. Not sure how you were able to flash the StockMOD ROM without having to flash a kernel. Especially when "How to flash" on the StockMOD page says "5. Flash Kernel (For WiFi)". Not saying you are lying, just that I don't understand why you didn't need to.
Click to expand...
Click to collapse
As for why, starting in 4.3 (MJB) samsung moved the modules required for wifi to work. They are now included in a different partition. Custom kernels (or rather any kernel but the original stock) look for the modules (drivers) to be in /system/lib/modules (the location on earlier builds). Since they are not there, the system doesnt know how to use the wifi radio resulting in no working wifi.
We got lucky with the MJ2 kernel. It was the first 4.3 leak, and just by chance I tried it on a different leak (for the T999) while trying to figure out the wifi issue and it worked! They simply had not made the change in that test build. Pure luck! The kt747 kernel works because it was built from source and modified to use its own modules which are included in the kernel package.
It has been a good while, so as for where the modules are located now im not suren. But if you browse to /system/lib/modules and find wlan.ko, youll see it is symlinked to /system/lib/modules/prima/prima_wlan.ko. Youll also notice there is no prima folder or file. In older builds, the wlan.ko file was actually there.
Hope that made sense and hope I got most of it correct. (Going from memory)
DocHoliday77 said:
Are you using this rom along with the included kernel? Or something different?
As for why, starting in 4.3 (MJB) samsung moved the modules required for wifi to work. They are now included in a different partition. Custom kernels (or rather any kernel but the original stock) look for the modules (drivers) to be in /system/lib/modules (the location on earlier builds). Since they are not there, the system doesnt know how to use the wifi radio resulting in no working wifi.
We got lucky with the MJ2 kernel. It was the first 4.3 leak, and just by chance I tried it on a different leak (for the T999) while trying to figure out the wifi issue and it worked! They simply had not made the change in that test build. Pure luck! The kt747 kernel works because it was built from source and modified to use its own modules which are included in the kernel package.
It has been a good while, so as for where the modules are located now im not suren. But if you browse to /system/lib/modules and find wlan.ko, youll see it is symlinked to /system/lib/modules/prima/prima_wlan.ko. Youll also notice there is no prima folder or file. In older builds, the wlan.ko file was actually there.
Hope that made sense and hope I got most of it correct. (Going from memory)
Click to expand...
Click to collapse
whatever kernel that was built into the rom is what im on I listed it in my reply before, I haven't flashed anything else ONLY THE ROM, mine booted right up n works great,
The more I think about it, it makes sense to me in both situations.
Id expect it to work on 4 4.2 because the wifi drivers are still in the same location, so as long as youre on 4.3 or above, it should work, as it apoears to do for you. But there are ithers who it did not work for and they have to use one of those other kernels. So it could be newer drivers not being compatible. Either way, if wifi is not working, I do know the kernel change will fix it.
DocHoliday77 said:
The more I think about it, it makes sense to me in both situations.
Id expect it to work on 4 4.2 because the wifi drivers are still in the same location, so as long as youre on 4.3 or above, it should work, as it apoears to do for you. But there are ithers who it did not work for and they have to use one of those other kernels. So it could be newer drivers not being compatible. Either way, if wifi is not working, I do know the kernel change will fix it.
Click to expand...
Click to collapse
well I have a twrp backup of it on my phone if you have some way of opening it, maybe somehow I could send it to you n whatever you find may be a tremendous help to you in how to fix the wifi n not having to flash the other kernels
I dont think there would be anything in a nandroid backup that would help. But tbh, right now I have no intention of digging into it any further. First because we already do have a pretty simple solution, and second because im already swamped with other projects and problems I've promised others I would work on.