am I able to flash this StockMOD Custom ROM 4.3 RLS2.1 for att or tmobile, over my existing stock 4.4.2, my modem as of now is i747UCUFNE4 but the rom description says to flash the 4.3 modem or it wont get data? someone help me out
heres the rom url http://forum.xda-developers.com/showthread.php?t=2504903
do not flash the older modem. just flash the rom and youll be good to go.
DocHoliday77 said:
do not flash the older modem. just flash the rom and youll be good to go.
Click to expand...
Click to collapse
since im coming from stock 4.4.2 do I only wipe cache n dalvik before flashing
You will most likely have to factory reset since you are downgrading.
You can try just wiping dalvik, but if it hangs at boot youll have to factory reset.
one more question
DocHoliday77 said:
You will most likely have to factory reset since you are downgrading.
You can try just wiping dalvik, but if it hangs at boot youll have to factory reset.
Click to expand...
Click to collapse
Thank You I tried wiping cache n dalvik, it hung but I went back in to twrp n wiped cache n dalvik again after install, worked like a charm!!!!!
hank you very much but can you answer me one question is there anyway you or another could port the revolutionary s5 v3 to the i747 it looks so amazing they only have it for the s3 i9300 not the s3 i747
Afaik, porting from tbe i9300 is a pretty difficult process. The device is very different from ours. Not saying it isnt possible, but I dont think we've really ever had any ports from that device.
I wont be able to try as I just have too much on my plate already and not enough time as it is. Sorry....maybe someone else will tackle it....
DocHoliday77 said:
Afaik, porting from tbe i9300 is a pretty difficult process. The device is very different from ours. Not saying it isnt possible, but I dont think we've really ever had any ports from that device.
I wont be able to try as I just have too much on my plate already and not enough time as it is. Sorry....maybe someone else will tackle it....
Click to expand...
Click to collapse
well thank you very much for responding you've been a very patient n helping hand if you could maybe you could pass it around to some of the other developers you are in contact with I know of about 30 people personally that would love to have that on there i747 not counting the people ive seen on here asking for a rom from the s5 but no big deal THANKS AGAIN
I was watching this thread because I had the exact same question. I tried installing the "StockMOD Custom ROM 4.3 RLS2.1" and my S3 wouldn't even boot past the Samsung screen. I left it there for 15 minutes and nothing. I tried wiping dalvik/cache from recovery and then it wouldn't even get that far. From that point on when I tried to reinstall the ROM it would go by and then when it got to the rebooting stage it would tell me "No OS installed. Are you sure you want to reboot?", or something of that nature. I then installed the Deodex Debloat Version from here: http://forum.xda-developers.com/showthread.php?t=2540998 and it installed/booted on the first try. Only problem is that Wi-Fi does not work & not sure of what my next step should be to get Wi-Fi working. I came from 4.4.2 OTA. Should I install the 4.3 modem or try flashing the StockMOD Rom again? I'm confused because it was stated that it didn't need to be installed.
Edit: I installed the StockMOD ROM directly over top without wiping anything and it worked. If I just want the "Deodex Debloat" version should I wipe, reinstall that ROM, then install the 4.3 modem since it didn't work before?
Edit: Second time flashing the Deodex Debloat ROM & Wi-Fi is working but now I have no data/4G. Help! LoL.
plastic_green_head said:
I was watching this thread because I had the exact same question. I tried installing the "StockMOD Custom ROM 4.3 RLS2.1" and my S3 wouldn't even boot past the Samsung screen. I left it there for 15 minutes and nothing. I tried wiping dalvik/cache from recovery and then it wouldn't even get that far. From that point on when I tried to reinstall the ROM it would go by and then when it got to the rebooting stage it would tell me "No OS installed. Are you sure you want to reboot?", or something of that nature. I then installed the Deodex Debloat Version from here: http://forum.xda-developers.com/showthread.php?t=2540998 and it installed/booted on the first try. Only problem is that Wi-Fi does not work & not sure of what my next step should be to get Wi-Fi working. I came from 4.4.2 OTA. Should I install the 4.3 modem or try flashing the StockMOD Rom again? I'm confused because it was stated that it didn't need to be installed.
Edit: I installed the StockMOD ROM directly over top without wiping anything and it worked. If I just want the "Deodex Debloat" version should I wipe, reinstall that ROM, then install the 4.3 modem since it didn't work before?
Edit: Second time flashing the Deodex Debloat ROM & Wi-Fi is working but now I have no data/4G. Help! LoL.
Click to expand...
Click to collapse
if you flashed it without wiping cache n dalvik- dirty flash then it should have worked unless u came from another 4.4.2 rom mine is working fine
correct me if im wrong
If ypu updated to 4.4.2, and then flashed a 4.3 rom, you have to use either the MJ2 or kt747 kernel or wifi wont work.
DocHoliday77 said:
If ypu updated to 4.4.2, and then flashed a 4.3 rom, you have to use either the MJ2 or kt747 kernel or wifi wont work.
Click to expand...
Click to collapse
that's not entirely true im not using either n my wifi is fine im on
kernel 3.0.31.1804024
[email protected]#1
i upgraded ota to 4.4.2 n never flashed any kernel at all
DocHoliday77 said:
If ypu updated to 4.4.2, and then flashed a 4.3 rom, you have to use either the MJ2 or kt747 kernel or wifi wont work.
Click to expand...
Click to collapse
Why exactly will it not work to flash a MJB kernel?
Boston78 said:
that's not entirely true im not using either n my wifi is fine im on
kernel 3.0.31.1804024
[email protected]#1
i upgraded ota to 4.4.2 n never flashed any kernel at all
Click to expand...
Click to collapse
I would get either no wifi or no data depending on which modem was used after flashing the rom.
01 - Via TWRP (2.7.1.0) dirty flash d2att_4.3_MJB_Debloat_Deodex_v1.2.zip
02 - Reboot without wiping cache/dalvik = freeze at AT&T logo
03 - Wipe cache/dalvik = freeze at AT&T logo
04 - Factory Reset = success with the exception of no wifi
05 - Flash MJB modem = Wifi now enabled but no data. (baseband unknown/imei null)
06 - Flash NE4 modem = data/baseband/imei restored, but no wifi again
07 - Flash UCUEMJ2_Insecure_kernel.zip + wipe cache/dalvik & reboot = somplete succcess (wifi+data all working)
At least for my experience Doc is 100% correct. Not sure how you were able to flash the StockMOD ROM without having to flash a kernel. Especially when "How to flash" on the StockMOD page says "5. Flash Kernel (For WiFi)". Not saying you are lying, just that I don't understand why you didn't need to.
Boston78 said:
that's not entirely true im not using either n my wifi is fine im on
kernel 3.0.31.1804024
[email protected]#1
i upgraded ota to 4.4.2 n never flashed any kernel at all
Click to expand...
Click to collapse
Are you using this rom along with the included kernel? Or something different?
plastic_green_head said:
Why exactly will it not work to flash a MJB kernel?
I would get either no wifi or no data depending on which modem was used after flashing the rom.
01 - Via TWRP (2.7.1.0) dirty flash d2att_4.3_MJB_Debloat_Deodex_v1.2.zip
02 - Reboot without wiping cache/dalvik = freeze at AT&T logo
03 - Wipe cache/dalvik = freeze at AT&T logo
04 - Factory Reset = success with the exception of no wifi
05 - Flash MJB modem = Wifi now enabled but no data. (baseband unknown/imei null)
06 - Flash NE4 modem = data/baseband/imei restored, but no wifi again
07 - Flash UCUEMJ2_Insecure_kernel.zip + wipe cache/dalvik & reboot = somplete succcess (wifi+data all working)
At least for my experience Doc is 100% correct. Not sure how you were able to flash the StockMOD ROM without having to flash a kernel. Especially when "How to flash" on the StockMOD page says "5. Flash Kernel (For WiFi)". Not saying you are lying, just that I don't understand why you didn't need to.
Click to expand...
Click to collapse
As for why, starting in 4.3 (MJB) samsung moved the modules required for wifi to work. They are now included in a different partition. Custom kernels (or rather any kernel but the original stock) look for the modules (drivers) to be in /system/lib/modules (the location on earlier builds). Since they are not there, the system doesnt know how to use the wifi radio resulting in no working wifi.
We got lucky with the MJ2 kernel. It was the first 4.3 leak, and just by chance I tried it on a different leak (for the T999) while trying to figure out the wifi issue and it worked! They simply had not made the change in that test build. Pure luck! The kt747 kernel works because it was built from source and modified to use its own modules which are included in the kernel package.
It has been a good while, so as for where the modules are located now im not suren. But if you browse to /system/lib/modules and find wlan.ko, youll see it is symlinked to /system/lib/modules/prima/prima_wlan.ko. Youll also notice there is no prima folder or file. In older builds, the wlan.ko file was actually there.
Hope that made sense and hope I got most of it correct. (Going from memory)
DocHoliday77 said:
Are you using this rom along with the included kernel? Or something different?
As for why, starting in 4.3 (MJB) samsung moved the modules required for wifi to work. They are now included in a different partition. Custom kernels (or rather any kernel but the original stock) look for the modules (drivers) to be in /system/lib/modules (the location on earlier builds). Since they are not there, the system doesnt know how to use the wifi radio resulting in no working wifi.
We got lucky with the MJ2 kernel. It was the first 4.3 leak, and just by chance I tried it on a different leak (for the T999) while trying to figure out the wifi issue and it worked! They simply had not made the change in that test build. Pure luck! The kt747 kernel works because it was built from source and modified to use its own modules which are included in the kernel package.
It has been a good while, so as for where the modules are located now im not suren. But if you browse to /system/lib/modules and find wlan.ko, youll see it is symlinked to /system/lib/modules/prima/prima_wlan.ko. Youll also notice there is no prima folder or file. In older builds, the wlan.ko file was actually there.
Hope that made sense and hope I got most of it correct. (Going from memory)
Click to expand...
Click to collapse
whatever kernel that was built into the rom is what im on I listed it in my reply before, I haven't flashed anything else ONLY THE ROM, mine booted right up n works great,
The more I think about it, it makes sense to me in both situations.
Id expect it to work on 4 4.2 because the wifi drivers are still in the same location, so as long as youre on 4.3 or above, it should work, as it apoears to do for you. But there are ithers who it did not work for and they have to use one of those other kernels. So it could be newer drivers not being compatible. Either way, if wifi is not working, I do know the kernel change will fix it.
DocHoliday77 said:
The more I think about it, it makes sense to me in both situations.
Id expect it to work on 4 4.2 because the wifi drivers are still in the same location, so as long as youre on 4.3 or above, it should work, as it apoears to do for you. But there are ithers who it did not work for and they have to use one of those other kernels. So it could be newer drivers not being compatible. Either way, if wifi is not working, I do know the kernel change will fix it.
Click to expand...
Click to collapse
well I have a twrp backup of it on my phone if you have some way of opening it, maybe somehow I could send it to you n whatever you find may be a tremendous help to you in how to fix the wifi n not having to flash the other kernels
I dont think there would be anything in a nandroid backup that would help. But tbh, right now I have no intention of digging into it any further. First because we already do have a pretty simple solution, and second because im already swamped with other projects and problems I've promised others I would work on.
Related
So, first off, just wanna say that I have a RIDICULOUS amount of experience with flashing roms. Literally over 100 different devices and 1000s of different flashes of my own devices on top of it. Quite familiar with this S2 as well and have customized them to all sorts of extents, but this one has me baffled. This phone refuses to run 4.2.2/4.3/4.4.x roms. Using the most up to date radio and the suggested TWRP (2.6.1.0) as well as CWM 6.0.44 and the newer TWRP: 2.6.3.0. Every time the phone will get to the set up screen, refreeze and boot. No issues running stock or stock based 4.1.2 roms. I've tried changing recoveries, wiping everything (/system, /data, /caches) repeatedly, Odin back to stock and redoing everything, switching kernels, wiping caches before rebooting and leaving it be, changing batteries, etc but nothing has worked. So far I've tried BlackLiquid 2.92 (4.2.2 stable), Awesome Audio rom (4.3), official CM11 (whatever the last build up was last night), and BeanStalk 4.4.2 (12/16) and all behave exactly the same - freeze on start up and reboot. This doesn't seem to be much of a widespread issue obviously, so just baffled and getting a bit frustrated as this should have been a 20 minute process that has turned into a few hours already. Since USB Debugging isn't on by default on newer roms, how would I even do a logcat to see if there is anything meaningful there? Any ideas?
Update: I have another S2. Performed same steps, same TWRP, same radio and rom, on same external SD card and that one booted right up like normal confirming that it is the phone itself, but what causes that?? Corrupted partitions?
I have the same problem, just format your internal and external sd card with just ROM file on your storage then try to install, than please inform me
Sent from my SGH-T989 using XDA Premium 4 mobile app
iamdofus said:
I have the same problem, just format your internal and external sd card with just ROM file on your storage then try to install, than please inform me
Sent from my SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Nope. No luck there (only tried Beanstalk so far, but exact same issue). Thanks for the suggestion though! Only using internal storage, no SD card, though thinking I might try that next...
Edit: Just to be thorough, I formatted internal storage via TWRP and my computer then readded the files and just tried to boot rom only and freezes before I can do anything.
Do you by chance have a refurbished s2?
The screen has been replaced by a friend of mine and he managed to mess up the soft keys with it, but everything else functions. That's actually why he sent it to me, so I could hook him up with Pie and all that kind of thing so the soft keys aren't an issue. What's your thoughts on the refurb side of it?
es0tericcha0s said:
The screen has been replaced by a friend of mine and he managed to mess up the soft keys with it, but everything else functions. That's actually why he sent it to me, so I could hook him up with Pie and all that kind of thing so the soft keys aren't an issue. What's your thoughts on the refurb side of it?
Click to expand...
Click to collapse
OK thanks for reply, I have one more solution give me. Some time I will give try that it worked for me.
Sent from my SGH-T989 using XDA Premium 4 mobile app
es0tericcha0s said:
Nope. No luck there (only tried Beanstalk so far, but exact same issue). Thanks for the suggestion though! Only using internal storage, no SD card, though thinking I might try that next...
Edit: Just to be thorough, I formatted internal storage via TWRP and my computer then readded the files and just tried to boot rom only and freezes before I can do anything.
Click to expand...
Click to collapse
ok lets stat it with this
1) download both the scripts of infamous wipe cache and infamous super wipe.
2) format your both SD card with PC (FAT32)
2) put both these wipe files and and your rom file ( i prefer try slimbean rom first)
3) Now in twrp 2.6.0.0- follow the steps
i) format your phone with twrp options
ii) again format your phone with infamous super file. (by going in to INSTALL ZIP file option in TWRP)
iii) than format with infamouse cache file (by going in to INSTALL ZIP file option in TWRP)
iv) install your rom and compatiable GAPPS zip file.
v) after installing or somewhere between procedure if twrp says something about supersu birnaries are not correct than click on DO . NOT FIX
vi) again format infamouse cache wipe.
vii) now FINALLY reboot the rom.
it should work, and it worked for me. if u sucessfully run the rom than you can eailsy run all the AOSP roms in this forum. Again If you try this please do tell me what happend.
Followed to a "T" and still in the same boat - freezes after bootup. I used those same steps before with another darkside wipe script (maybe older?) but yea, have already been down that road. I did downgrade to 2.6.0.0 and used Slim 4.3 because 4.4 is supposed to use the newer TWRP, just to be certain, but GRRR. I guess we're just gonna have to settle for a 4.1.2 rom and call it a day. :/
So here are the log output from the wipes:
https://dl.dropboxusercontent.com/u/9903887/INFAMOUS.SUPER.WIPE_recovery.log
https://dl.dropboxusercontent.com/u/9903887/INFAMOUS.CACHE.WIPE_recovery.log
I see some stuff at the bottom of those that might indicate something weird, but I am not adept at interpreting these, so just wondering if someone could point me to the right direction about the repair checks and what not listed on these. Thanks!
Edit 2: I did get a AOSP based 4.1.2 rom to boot with no problems! wtf... LoL
Last Edit:
Problem solved! I used basically the same steps I had been doing but once the AOSP 4.1.2 rom booted then now everything works like it should again. Have loaded a 4.3 and 4.4 rom successfully. Thanks for the help!
es0tericcha0s said:
So, first off, just wanna say that I have a RIDICULOUS amount of experience with flashing roms. Literally over 100 different devices and 1000s of different flashes of my own devices on top of it. Quite familiar with this S2 as well and have customized them to all sorts of extents, but this one has me baffled. This phone refuses to run 4.2.2/4.3/4.4.x roms. Using the most up to date radio and the suggested TWRP (2.6.1.0) as well as CWM 6.0.44 and the newer TWRP: 2.6.3.0. Every time the phone will get to the set up screen, refreeze and boot. No issues running stock or stock based 4.1.2 roms. I've tried changing recoveries, wiping everything (/system, /data, /caches) repeatedly, Odin back to stock and redoing everything, switching kernels, wiping caches before rebooting and leaving it be, changing batteries, etc but nothing has worked. So far I've tried BlackLiquid 2.92 (4.2.2 stable), Awesome Audio rom (4.3), official CM11 (whatever the last build up was last night), and BeanStalk 4.4.2 (12/16) and all behave exactly the same - freeze on start up and reboot. This doesn't seem to be much of a widespread issue obviously, so just baffled and getting a bit frustrated as this should have been a 20 minute process that has turned into a few hours already. Since USB Debugging isn't on by default on newer roms, how would I even do a logcat to see if there is anything meaningful there? Any ideas?
Update: I have another S2. Performed same steps, same TWRP, same radio and rom, on same external SD card and that one booted right up like normal confirming that it is the phone itself, but what causes that?? Corrupted partitions?
Click to expand...
Click to collapse
Interesting, so you're saying it's phone specific?
That begs to ask other questions now:
1. Where did this phone come from? is it a Tmobile version (SGH-T989) or AT&T (i-1900)?
2. You mentioned you got it from a friend; did it come rooted? unlocked? Or did you have to do that process yourself?
UltimaniumX said:
Interesting, so you're saying it's phone specific?
That begs to ask other questions now:
1. Where did this phone come from? is it a Tmobile version (SGH-T989) or AT&T (i-1900)?
2. You mentioned you got it from a friend; did it come rooted? unlocked? Or did you have to do that process yourself?
Click to expand...
Click to collapse
Yep, very much phone specific. Used same recovery, same rom zip and gapps off the same external SD card, to be certain. That one updated just like every other S2 I've done. And it's the Tmo version. The At&t models are i777 S2 or i727 S2 Skyrocket. The i9100 is international and has a physical home button. But the phone was not modified at all. No root, custom recovery, etc. I was only able to resolve it by first starting with an AOSP 4.1.2 rom and working my way up to 4.4. One of the weirder issues I've come across.
es0tericcha0s said:
Followed to a "T" and still in the same boat - freezes after bootup. I used those same steps before with another darkside wipe script (maybe older?) but yea, have already been down that road. I did downgrade to 2.6.0.0 and used Slim 4.3 because 4.4 is supposed to use the newer TWRP, just to be certain, but GRRR. I guess we're just gonna have to settle for a 4.1.2 rom and call it a day. :/
So here are the log output from the wipes:
https://dl.dropboxusercontent.com/u/9903887/INFAMOUS.SUPER.WIPE_recovery.log
https://dl.dropboxusercontent.com/u/9903887/INFAMOUS.CACHE.WIPE_recovery.log
I see some stuff at the bottom of those that might indicate something weird, but I am not adept at interpreting these, so just wondering if someone could point me to the right direction about the repair checks and what not listed on these. Thanks!
Edit 2: I did get a AOSP based 4.1.2 rom to boot with no problems! wtf... LoL
Last Edit:
Problem solved! I used basically the same steps I had been doing but once the AOSP 4.1.2 rom booted then now everything works like it should again. Have loaded a 4.3 and 4.4 rom successfully. Thanks for the help!
Click to expand...
Click to collapse
What did you exactly do? I flashed a 4.1.2 and then flashed a 4.3 based ROM and it didn't work. What recovery version did you use to flash the 4.3 ROM?
tpag02 said:
What did you exactly do? I flashed a 4.1.2 and then flashed a 4.3 based ROM and it didn't work. What recovery version did you use to flash the 4.3 ROM?
Click to expand...
Click to collapse
Sorry, I don't pay attention to the notifications on XDA very often. I don't usually browse the S2 forums unless needed because I have an N5, but anyway... The 4.1.2 rom you used, was it TW or AOSP type? I used 2.6.0 to wipe everything, then used cache and superwipe zips then 4.1.2 AOSP type rom then cache wipe zip again then after that booted, I was able to go back to 2.6.1 and flash a 4.3 via wiping, wipe zips, installing rom then cache wipe again. After that, repeated with a KK rom and now it loads roms just like it should. If you want more precise help, feel free to hit me up on Hangouts with my username: es0tericcha0s. Good luck! I know how frustrating it can be when it gets a little out of whack like this...
I'm in the same boat
Same here. I just bought a galaxy s2 from my friend (tmobile version) and I too get stuck in a bootloop no matter what rom I use. It boots up freezes then reboots 7 keeps doing that endelessly. I've even wiped using twrp & darkside then reflashed the stock rom in odin, but no luck. strangely it only happens on the cellular network, otherwise it works fine on wifi. But when I turn off the wifi and go to the cellular network I can't even turn on the wifi anymore and still stuck in this boot loop It's wierd and frustrating.
DennyTek said:
Same here. I just bought a galaxy s2 from my friend (tmobile version) and I too get stuck in a bootloop no matter what rom I use. It boots up freezes then reboots 7 keeps doing that endelessly. I've even wiped using twrp & darkside then reflashed the stock rom in odin, but no luck. strangely it only happens on the cellular network, otherwise it works fine on wifi. But when I turn off the wifi and go to the cellular network I can't even turn on the wifi anymore and still stuck in this boot loop It's wierd and frustrating.
Click to expand...
Click to collapse
Hmm. That's interesting... This is happening on the stock rom - where you turn on cellular data and it reboots? Definitely a different issue than the one I was having. Which stock rom were you flashing via Odin? Have you tried other versions of the stock rom and had the same problem?
TMO 4.1.2
es0tericcha0s said:
Hmm. That's interesting... This is happening on the stock rom - where you turn on cellular data and it reboots? Definitely a different issue than the one I was having. Which stock rom were you flashing via Odin? Have you tried other versions of the stock rom and had the same problem?
Click to expand...
Click to collapse
This was happening on any rom I used (Cm 10.2 stable, Cm 11 nightly, AOKP & Super Nexus 3.0 which is Android 4.3) I can't really speak for the stock rom (tmo 4.1.2) since I've never used it for more that 5 minutes, sigh but I'll try it and see if it gives me the same problem :/
Are you guys flashing gapps if the ROM you're installing doesn't have it?
Sent from my SGH-T989 using Tapatalk
yep
wikitiki said:
Are you guys flashing gapps if the ROM you're installing doesn't have it?
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
ya, well at least I am anyways
wikitiki said:
Are you guys flashing gapps if the ROM you're installing doesn't have it?
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
I had tried with and without and did not make any difference.
DennyTek said:
This was happening on any rom I used (Cm 10.2 stable, Cm 11 nightly, AOKP & Super Nexus 3.0 which is Android 4.3) I can't really speak for the stock rom (tmo 4.1.2) since I've never used it for more that 5 minutes, sigh but I'll try it and see if it gives me the same problem :/
Click to expand...
Click to collapse
I just started working on a VZW S3 on T-Mobile service that has this issue. Happens on stock VZW 4.1.2, stock T-Mobile 4.1.2 rom, custom 4.1.2 T-Mobile rom, and stable CM 10.2. Weirdest thing... full wipes including /system inbetween each flash. Changed the modem too. Nothing helps. Pretty sure it's a bad board at this stage.
Cool beans, 0! Having this exact problem, will try your method for my s2, btw which aosp 4.1.2 did u use? Can I get a link? Thanks been having the problem for a few months now and just gave up haha, been super thirsty for that beanstalk kk build
One last thing can u also provide a link to the 4.3 that u used? I really want it to work and want to follow what u did to the , megabyte
I have a T989, not a T989D, running TWRP 2.7.1.0 and UVMC6 radio, coming from a JB 4.1.2 Slimrom.
Also I have taken out the board and inspected the power button, and everything seems okay there. I don't think it's being caused by a faulty button or some other hardware problem because I can flash my old Slimrom, and that boots up just fine.
I wanted to give Paranoid Android a whirl with the latest Wild kernel, and though I've tried 8 different PA builds, a PACman, a Slimkat, and an Alpine rom, ALL KitKat roms so far are bootlooping. [EDIT: Even PA 3.99 JB 4.3 is doing it. So it's more than just KitKat even.]
I'm doing the following:
Wipe system, data, cache, dalvik, and perhaps android secure and preload as well
Flash ROM & Gapps
Wipe cache & dalvik
Reboot
I reach the splash, and maybe it even finishes booting. But invariably, it takes about 60-90s from initialization before the screen dims, everything freezes for 2-5s, and it reboots.
I'm out of ideas.
Why won't my phone work with KitKat?
Thanks in advance
Have you ever used odin to flash the factory 4.1.2 UVMC6 rom? Some driver stuff was updated in that version and can only be installed with odin.
Edit: If your phone came with 4.1.2 jellybean, you already have the newest drivers.
meekrawb said:
Have you ever used odin to flash the factory 4.1.2 UVMC6 rom? Some driver stuff was updated in that version and can only be installed with odin.
Edit: If your phone came with 4.1.2 jellybean, you already have the newest drivers.
Click to expand...
Click to collapse
I read something to that effect. Haven't seen a .tar file for it, only .zip.
jaybird16 said:
I read something to that effect. Haven't seen a .tar file for it, only .zip.
Click to expand...
Click to collapse
If you sign up for an account on sammobile.com you can download from there. Just type "t989" in the search box.
meekrawb said:
If you sign up for an account on sammobile.com you can download from there. Just type "t989" in the search box.
Click to expand...
Click to collapse
Okay, I did that. Flashed the latest Paranoid Android 4.45. No dice. Same story.
jaybird16 said:
Okay, I did that. Flashed the latest Paranoid Android 4.5. No dice. Same story.
Click to expand...
Click to collapse
That was the only thing I could think of. Maybe someone else has some ideas.
I had the same problem. Turned out it had to do with the recovery. I redownloaded twrp, used flashify to install it. And that fixed the problem.
meekrawb said:
That was the only thing I could think of. Maybe someone else has some ideas.
Click to expand...
Click to collapse
Much appreciated. My phone shipped at the tail end of Gingerbread. So now I have whatever drivers from 4.1.2, and that's one more potential problem eliminated.
The stock rom ran just fine, btw, once I factory reset (the documentation was nil, but at 750mb, I knew it was more than just UVMC6 radio firmware...)
So 4.1.x seems to be okay, but not 4.3.x or 4.4.x. Next I'll have to try a flavor of 4.2.x and see how it feels about that.
Lokke9191 said:
I had the same problem. Turned out it had to do with the recovery. I redownloaded twrp, used flashify to install it. And that fixed the problem.
Click to expand...
Click to collapse
Interesting.
After I flashed the stock UVMC6 (and associated rom and lameass stock recovery) earlier today, I felt it was safest to use Odin to reflash TWRP while I had a functioning rom (even tho not rooted). So I downloaded the tar and that's the recovery I used to test PA 4.45. I will be doing more testing. I mean, it's not because there are leprechauns in my phone, right?
jaybird16 said:
Interesting.
After I flashed the stock UVMC6 (and associated rom and lameass stock recovery) earlier today, I felt it was safest to use Odin to reflash TWRP while I had a functioning rom (even tho not rooted). So I downloaded the tar and that's the recovery I used to test PA 4.5. I will be doing more testing. I mean, it's not because there are leprechauns in my phone, right?
Click to expand...
Click to collapse
Never. Ever. Rule out leprechauns!
Lokke9191 said:
Never. Ever. Rule out leprechauns!
Click to expand...
Click to collapse
LOL, good point.
w00t! TWRP 2.1.8 for the Hercules just dropped!
I was thinking maybe the MD5 wouldn't have checked out the first time you downloaded, but would have the second time. I don't usually bother unless I have a reason to think that's a problem. I can always look after the fact.
Downloaded 2.1.8 and MD5 checks out...now to flash it...
jaybird16 said:
LOL, good point.
w00t! TWRP 2.1.8 for the Hercules just dropped!
I was thinking maybe the MD5 wouldn't have checked out the first time you downloaded, but would have the second time. I don't usually bother unless I have a reason to think that's a problem. I can always look after the fact.
Downloaded 2.1.8 and MD5 checks out...now to flash it...
Click to expand...
Click to collapse
Nice. Lemme know how it works out. Oh. The new PA is awesome.
My bad. I saw the number "8" at the bottom of the page which had not been there earlier and assumed it was next after after "7". No, that's an ancient recovery from 2012.
TWRP 2.8.1 for the Hercules has NOT just dropped!
Okay, so, my first test with a newly downloaded, MD5 checked, and flashed TWRP 2.7.1 recovery, and an MD5 checked PA 4.45 has not produced any different result.
However, you've made me realize that I can't hope to troubleshoot this without being fastidious about MD5 from here on out, so, thx 4 that.
...same goes for a 2nd test with an MD5 checked PA 4.5 Alpha3...
...same goes for a 3rd test with an MD5 checked PA v3.69 (4.2)...
...But Slim-Star v4.12 (4.2) loads no problem...go figure...
Fix permissions?
I tried to install the PA 4.5 Beta, and same problem. It bootloops.
Could it have anything to do with permissions?
jaybird16 said:
Interesting.
After I flashed the stock UVMC6 (and associated rom and lameass stock recovery) earlier today, I felt it was safest to use Odin to reflash TWRP while I had a functioning rom (even tho not rooted). So I downloaded the tar and that's the recovery I used to test PA 4.45. I will be doing more testing. I mean, it's not because there are leprechauns in my phone, right?
Click to expand...
Click to collapse
when i had an issue like this i re-installed the factory original rom and started from the very beginning. if you've tried that and it doesn't work, well i'm pretty much unhelpful here. :crying:
Also note that WildKernel has a special version of v9 out for recent roms (roms released within the last two months).
Any other version of wildkernel will lead to bootloops in my experience.
If your rom is older than two months, then v8 or v9 should do fine
ayr0 said:
Also note that WildKernel has a special version of v9 out for recent roms (roms released within the last two months).
Any other version of wildkernel will lead to bootloops in my experience.
If your rom is older than two months, then v8 or v9 should do fine
Click to expand...
Click to collapse
There were problems reported of even the latest version of Wild! not working with Paranoid.
jrc2
Sent from my T-Mobile S2 using Tapatalk.
I'm having the same issues, but no one knows what's up. I've tried so many ROM's and only the older ones work.
http://forum.xda-developers.com/showpost.php?p=55050951&postcount=9
This is my post with the logs I got from the constant crash on cm11. I tried pa and had the same result.
Issue solved
After sharing some logs with Sultanxda, he pointed out this bootloop issue due to the CM kernel and helped me get it fixed.
My problem was that my phone would not boot on MOST JellyBean ROM's or ANY KitKat ROM. It would crash/kernel panic on or before the set up screen.
I do not know if the latest KitKat ROM's have the issue patched, but I asked if he could upload the patch for the kernel to source for other ROM's to use.
This thread should be solved I guess.
Recently tried several times to flash cm or other aosp roms. Always get stuck on boot screen. Only roms that boot are tw based. So are aosp roms not possible on my locked bootloader? Is my bootloader locked lol?
Did you do a full wipe before you flashed?
Full wipe / factory reset.
Only way to go from TW to cm.
Pp.
Yes. Using twrp. Used the standard wipe method. Also tried wiping caches and the system. Ive even formatted my system. Still always stuck on boot screen. It is the CM boot screen however.
PanchoPlanet said:
Full wipe / factory reset.
Only way to go from TW to cm.
Pp.
Click to expand...
Click to collapse
So it is possible to go to a CM rom even with the MK2 bootloader. Can anyone confirm this?
Take a look at this,
Galaxy S4 How To Install CyanogenMod 11 CM 11 Kit…: http://youtu.be/gUhlLgMA-cA
Pp.
Looks like only TW roms for me.......Thanks everybody.
Cm isn't as bad on a device that doesn't need to be super reliable, like my phone, I need it to be on point at all times having a disabled child in school and never knowing when the school may call for whatever reason. I do run it on my Gal Tab 2 and it runs great, no issues and great battery life.
Pp.
Alex1212 said:
So it is possible to go to a CM rom even with the MK2 bootloader. Can anyone confirm this?
Click to expand...
Click to collapse
I have a T-Mobile S4 with MK2 and I've been running CM since I bought it.
Sent from my SGH-M919 using XDA Free mobile app
Seriously? Weird. Are u sure its not your modem thats mk2?
Alex1212 said:
Seriously? Weird. Are u sure its not your modem thats mk2?
Click to expand...
Click to collapse
Bootloader or modem doesn't make a difference, even with NH7 bootloader you should be able to flash any rom
Now I'm confused...So then what's the big deal about locked/unlocked bootloaders? Any idea why aosp roms won't boot on my phone? I'm fairly positive I've done every wipe and my twrp is the most recent one....thanks in advance
Alex1212 said:
Now I'm confused...So then what's the big deal about locked/unlocked bootloaders? Any idea why aosp roms won't boot on my phone? I'm fairly positive I've done every wipe and my twrp is the most recent one....thanks in advance
Click to expand...
Click to collapse
We don't have locked bootloaders.. Don't know, try different kernel after you flash or another recovery like cwm or philz
I thought they locked them with the mk2 bootloader when they added knox. Ill try again ive tried flashing kt kernel after flashing rom and gapps(made sure it wasnt the tw version). Ill try with cwm recovery. Thanks for trying to help. Ill make a backup of my current rom and try again.
Alex1212 said:
I thought they locked them with the mk2 bootloader when they added knox. Ill try again ive tried flashing kt kernel after flashing rom and gapps(made sure it wasnt the tw version). Ill try with cwm recovery. Thanks for trying to help. Ill make a backup of my current rom and try again.
Click to expand...
Click to collapse
If they were locked you wouldn't have been able to flash a custom recovery
Locked bootloaders are seen on the Verizon and att varients of the S4 , that's where safestrap comes into play. Locked means you can't flash a recovery/custom Roms etc. T-Mobile comes with unlocked BL allowing us to customize our phones. NH7 doesn't allow to you to downgrade BL's, not the same as locked BL. Its a Knox thing, and that only messes with warranty.
Pp. ?
Tried flashing liquidsmooth last night and again stuck at boot screen. Wiped phone flashed rom then gapps. Also tried wipe rom, gapps, kt kernel. Waited 30 minutes then just went back to backup. Thanks for clearing this up guys. Any suggestions?
Alex1212 said:
Tried flashing liquidsmooth last night and again stuck at boot screen. Wiped phone flashed rom then gapps. Also tried wipe rom, gapps, kt kernel. Waited 30 minutes then just went back to backup. Thanks for clearing this up guys. Any suggestions?
Click to expand...
Click to collapse
Can you state exactly what you wipe?
In twrp I use the standard wipe. I forget what it's called but it's the top right button. Brings you to a screen that says that this is all u need to wipe for flashing a new rom. I think it's basically a factory reset. In addition to that I go in advanced wipe and do both caches. I've also even tried wiping system and a few times I've even formatted my data which I think deletes absolutely everything. I tried using Odin to go back to complete stock and re root then Odin twrp. Still sits at boot screen unless I flash a tw style rom...... I'm starting to think it might not even be worth it anymore, not even sure what I'm missing out on honestly. It's just really bugging me that aosp roms won't boot.
That is rather odd, they boot.. Only other thing to try is to flash a different kernel or switch recovery to cwm or philz
Hello everyone,
After a long fight to try and get this phone back to normal, everything seemed good,
except not really
I started on a buggy CM11 version. Sick of it, I downloaded a 4.4.4 stock rom. I had to disable firewall and defender, but I got Odin to flash my md5. I got through everything and it booted successfully. After signing in and all that jazz, I find out that my WiFi isn't working. After a few reboots, My 4G finally works and everything seems to be steady.
Then, after exploring the rest of the phone I find out that all my apps from last ROM are still there. I know that you are supposed to wipe before flashing, but I was told that Odin will take care of that. It obviously didn't.
After THAT, I try to boot into Recovery as the next sensible step is to try to wipe my data and cache. I turn the phone off and press (Vol up + Home + Pwr) and the first boot screen shows for a moment. It says in blue "RECOVERY BOOTING" in the corner. Right after, it disappears and in another second it does the same screen without the "RECOVERY BOOTING". And as presumed, it does a regular boot.
What did I miss? How can I wipe my phone from recovery? How can I fix my problem with Wifi?
Reflash in Odin.
Make sure you have the correct stock rom. If you flash the "md5" you may have flashed the wrong thing. The md5 is not tge firmware, that is just the code that verifies your firmware file is not corrupted.
If your old apps were still there, you flashed the wrong thing. There is no way to flash stock firmware in odin and not wipe the data partition.
You are correct then
Yeah, I flashed a tar.md5 in Odin. It gave me a new ROM but all my apps are there. After all that, I still can't go to recovery. I tried using the terminal and ROM Toolbox to go there, both didn't work. Can I just leave it as it is and find a way to recovery or is the only way to go to bootloader and flash a correct file to get to recovery?
Flash twrp and see if it will reboot into recovery, then factory reset and flash latest firmware with Odin right after. Odin will NOT wipe data. It has to be done manually
serio22 said:
Flash twrp and see if it will reboot into recovery, then factory reset and flash latest firmware with Odin right after. Odin will NOT wipe data. It has to be done manually
Click to expand...
Click to collapse
It depends on what you ate flashing.
If you are flashing a full stock factory image it will wipe user data. If you are just flashing a system partition it won't.
Essem G said:
Hello everyone,
After a long fight to try and get this phone back to normal, everything seemed good,
except not really
I started on a buggy CM11 version. Sick of it, I downloaded a 4.4.4 stock rom. I had to disable firewall and defender, but I got Odin to flash my md5. I got through everything and it booted successfully. After signing in and all that jazz, I find out that my WiFi isn't working. After a few reboots, My 4G finally works and everything seems to be steady.
Then, after exploring the rest of the phone I find out that all my apps from last ROM are still there. I know that you are supposed to wipe before flashing, but I was told that Odin will take care of that. It obviously didn't.
After THAT, I try to boot into Recovery as the next sensible step is to try to wipe my data and cache. I turn the phone off and press (Vol up + Home + Pwr) and the first boot screen shows for a moment. It says in blue "RECOVERY BOOTING" in the corner. Right after, it disappears and in another second it does the same screen without the "RECOVERY BOOTING". And as presumed, it does a regular boot.
What did I miss? How can I wipe my phone from recovery? How can I fix my problem with Wifi?
Click to expand...
Click to collapse
Fkash twrp and format system, data, cache and preload and install a deodexed stock os
g7755725 said:
Fkash twrp and format system, data, cache and preload and install a deodexed stock os
Click to expand...
Click to collapse
Also this. This gives you more control over the whole process
Skipjacks said:
Also this. This gives you more control over the whole process
Click to expand...
Click to collapse
How do I know whatever I download is deodexed? And I went to a page of ROMs someone gave me and I downloaded the NK2 version, which also gave me a tar.md5. If I want the correct thing to flash, what should I flash?
Essem G said:
How do I know whatever I download is deodexed? And I went to a page of ROMs someone gave me and I downloaded the NK2 version, which also gave me a tar.md5. If I want the correct thing to flash, what should I flash?
Click to expand...
Click to collapse
The first post of any customized stock rom will tell you if its deodexed. If it doesn't say it...its not.
@Essem G:
Any updates for us? I'm following this thread because I have similar problems with my WiFi not working after upgrading from 4.2.2.
Any luck getting TWRP flashed?
Also I believe that the stock firmwares do come as tar.md5's, as in the file: M919UVUFNK2_M919TMBFNK2_M919UVUFNK2_HOME.tar.md5 from ShinySide's stock firmware thread.
As for the WiFi issue, from the hours of reading I've done it looks like this problem occurs when you upgrade your firmware, but it no longer matches the bootloader. Such as bootloader (Baseband) showing MDL, but Build Number showing NH7, NK2, etc. What does your show?
This thread may be of use to you when you get back to a working ROM. Good luck!
@RavenMind1
Everyone has been saying different answers and i've put off fixing my device for a while. I'm just afraid i'll brick it forever and have another nightmare after this current one. So no, there has been no progress. I think i'm gonna try to flash Philz and format my system, then flash a deodexed rom. @g7755725 said that you can flash TWRP, but I usually use Philz. It appears to be that I have lost root access because no root features work and SuperSU won't recognize it. Will everything work or am I setting my self up for disaster?
Edit: Where can I find a deodexed rom? I desperately need one, thanks
Essem G said:
@RavenMind1
Everyone has been saying different answers and i've put off fixing my device for a while. I'm just afraid i'll brick it forever and have another nightmare after this current one. So no, there has been no progress. I think i'm gonna try to flash Philz and format my system, then flash a deodexed rom. @g7755725 said that you can flash TWRP, but I usually use Philz. It appears to be that I have lost root access because no root features work and SuperSU won't recognize it. Will everything work or am I setting my self up for disaster?
Edit: Where can I find a deodexed rom? I desperately need one, thanks
Click to expand...
Click to collapse
Look in the forums for deodexed rom theirs a bunch and untouched as well i had philz but it eoukdnt boot my s4 so i had to switch to twrp because it does better then any recovery
g7755725 said:
Look in the forums for deodexed rom theirs a bunch and untouched as well i had philz but it eoukdnt boot my s4 so i had to switch to twrp because it does better then any recovery
Click to expand...
Click to collapse
Thanks for the support so far, but has this problem occured before? do you think the steps i've listed will solve this? Im just trying to make sure that I know exactly what to do before I go in. Thanks
Essem G said:
Thanks for the support so far, but has this problem occured before? do you think the steps i've listed will solve this? Im just trying to make sure that I know exactly what to do before I go in. Thanks[/Q] it should
Click to expand...
Click to collapse
@g7755725 I downloaded a deodexed rom from the SkipJacks guy (different page than what you sent me) and it's a little under 9MB... how could this possibly be a ROM?
Essem G said:
@g7755725 I downloaded a deodexed rom from the SkipJacks guy (different page than what you sent me) and it's a little under 9MB... how could this possibly be a ROM?
Click to expand...
Click to collapse
Have you tried my gamerrom Ultimate 1 its basically stock touchwiz of if Official NK2 M919UVUFNK2 with stweaks and no bloatware here is the thread gru 1 is in.the botyom of the thread http://forum.xda-developers.com/galaxy-s4-tmobile/development/stock-os-gamerrom-ultimate-2-touchwiz-t3078467
Sounds cool but i would have been interested a few months ago. I'm trying to sell the phone so I need to get it back to stock. Appreciate all the help and I think it's cool that you make ROMs
Essem G said:
Sounds cool but i would have been interested a few months ago. I'm trying to sell the phone so I need to get it back to stock. Appreciate all the help and I think it's cool that you make ROMs
Click to expand...
Click to collapse
If you're trying to go back to complete stock then just Odin NK2 firmware. http://forum.xda-developers.com/galaxy-s4-tmobile/general/firmwares-official-mdl-mk2-nb4-t2816508 I used the NK2 from here about 2 days ago to go back to stock.
I've been trying for over a month to get wicked rom installed on my n3 n900t . I'm rooted bootloader unlocked with twrp installed. I've had no issue installing any other rom on this phone I'm currently running alliance 5.0 and resurrection remix 6.0.1 and they work great but I would like to see what wicked is like. ( what it does when trying to install ) OK I have the wicked rom saved to my SD card with 4.4.2 gapps I'll restore my phone to alliance rom which is 4.4.2 and is says in the install it needs to be a 4.4.2 bootloader to install wicked, I'll go into twrp do a full wipe data, delvic,system, wipe it out then install the ROM and gapps package and it'll start to do its thing then get to where it says aramullz xda ( something? ) the progress bar will stop and it'll self boot itself out of twrp and go back to alliance rom and which will be messed up due to doing a full wipe. I like to figure things out on my own that's the fun part but this one's got me. Thanks for any advice.
Did you use terminal or Samsung Phone Info app to verify the bootloader in the phone?
I installed compullsion kernel 4.4.2 before and that failed, tried installing it while flashing the rom and gapps that failed, tried the other older versions of wicked v5 and v4 and v1 they all act exactly the same. I even wiped the whole phone completely cause I got Pissed due to failure ( lol ) flashed a fresh AP in Odin and tried everything again and still failed. I'm in the process of trying to convert the zip file to a tar md5 but having issues that Odin won't except the files cause the ( tar archived ) and I did flash the 4.4.2 bootloader as well. I'm beginning to think wicked doesn't like me.
My bootloader info should be 4.4.2
fastjohnson said:
this the info now which is useless because I'm on alliance 5.0 rom so it originally came from 4.4.2 chainfire zip.
Click to expand...
Click to collapse
Yes, looks like the phone is on 4.4.2 bootloader. Were you able to install the ROM?
audit13 said:
Yes, looks like the phone is on 4.4.2 bootloader. Were you able to install the ROM?
Click to expand...
Click to collapse
No still nothing I've tried everything I even wiped the entire phone installed the B4 Odin files AP and BL and CSC then flash chain fires autoroot file and twrp. The phone was basically stock 4.4.2. I tried all 3 wicked zips V1 V4 V5 and they all reacted the same way. And I already grabbed these files from different locations to make sure I didn't possibly get a bad batch. I've got every rom to flash on this no problem. Pacman, RR, alliance, slimroms, any cyan rom, I've come to terms no wicked for me. Lol
Lol, finally got wicked installed via flashfire. Twrp wouldn't do it. Super happy really fast rom.
What versions of twrp did you try? Just curious.
Using the newest 3.0.2 I think. Btw wicked rom so far is the most stable coolest rom I've experienced so far. I forsee it as my daily.
I have seen reports of some people having issues with 3.0 and higher so I stick with 2.87 for my devices.
No I actually didn't catch that. Besides that it refusing to install the wicked rom I haven't seen very many other issues. Well sometimes when im restoring a rom in twrp when it boots itll sometimes not in stall a lot of Google Play stuff and the UI will crash and I'll have to restore it again. I actually like the look and the button placement better in the version your using.