Can you help me?I have my code to unlock my samsung but don't know what to do with?My phone ask me for code pin but i don't have *and # so i can't enter the code i have?I need help,please.
Nobody to help me please?
Nobody to explain me how to enter the code i pay?
Please?
Courtesy of http://www.unlocksamsung.co.uk/guides.htm
Model: Samsung i900
1. Insert an unaccepted SIM card
2. Enter the pin code to SIM card
3. At the top of screen a "lock" symbol with the letters NET will appear
4. You will also be presented with the options "OK"; "Dismiss"
5. Press the "OK" option
6. Virtual keyboard appears on screen (the "Enter PIN" prompt may or may not appear).
7. Enter your 8-digit unlock code.
8. Your phone is now unlocked
Click to expand...
Click to collapse
Thank's a lot,i try but my code is wrong i think, it don't work, but thank you very much!!!
Can you try this for me?
go to phone dialer, enter the following: *#7465625#
can you change all entries to Enabled?
**I've an unlocked Omnia so can't try it for you first.**
Ok i do this but if i try again nothing is change, can you explain me what you want me to do?
Surely if you set all options to enabled, it'll enable ALL locks on the phone instead of disabling them?
After setting the "network lock" to disabled, when you enter that service menu again, it just automatically re-enables it again
Where can I find my unlock code
I have been reading the posts about this. I am on the Vodafone Dutch provider and want to unlock the i900 I have. Now, I have no idea where to find it and as you are the expert, can you help me?
craig46 said:
I have been reading the posts about this. I am on the Vodafone Dutch provider and want to unlock the i900 I have. Now, I have no idea where to find it and as you are the expert, can you help me?
Click to expand...
Click to collapse
Just been surfing about..now you will not get you unlock code until the i900 you have from your provider is more than a year old. So, unless you want to pay to have it done (+/- €40 here in NL) you will just have to patient!
omnia sim unlock
no free solution?
for sure there is not..... i can get you the code for 30 euros though in arround one day
www.3grpl.com can help for 15 euro and fast service i have tested
This is for an I907. I imagine that if you are locked to a carrier to you call tech support and do something along these lines and go through the same process.
That is, assuming that you have some sort of account with the company that originally had your phone. I got my off ebay, but it was AT&T locked. Luckily I have an ATT account.
I called ATT support (611) pressed, 1, 5, 5, 0 (or something like that to get to a customer service person and said:
I am going to Hong Kong, a friend purchased a prepaid sim card for me. He said that I needed to call AT&T to ask for a subsidy unlock code to use my card over there.
They checked the imei and account code and then gave me my 8 digit number.
May not apply if you don't have an account with the locking company. Good luck.
There is a solution
http://www.bytetips.com/free-unlock-tricks-for-samsung-omnia-i780-and-i900/
One more solution
http://www.samsung-omnia.org/how-to...omnia-i900-(remove-simlock)/?action=printpage
Try this but not sure
Just enter this code on ur omnia and u have a unlock phone..
*2767*3855# > this is for Hard Reset, not to unlock sim: edited by Admin
I unlocked mine just now... Mine was locked to Orange, UK...
Enjoy
I got my unlock code from AT&T, but they told me I must enter a non-ATT SIM to enter the code.
In searching the forum, the CDMA Rhodium apparently has a security menu under Settings-> Personal where you can enter it. That icon doesn't seem to exist on the Tilt 2.
Anyone know where to enter the pin?
You need to insert a non ATT sim card - start up your phone - a screen will pop up asking you to enter the unlock code - after you enter it, hit "ok".
That is all you need do.
long story short:
1.att lumia 900
2.confirmed correct unlock code;
3.flash and add Chinese language before I enter the unlock code;
4.entered the unlock code,didn't work ;tried 10 times but didn't show the 32times PUK requirements like the" Unlocking Lumia 900 -- AT&T SIM/Network Lock Code Is Incorrect - FIXED! "
5.thought it might be the language issue.flashed back to the 7.5 original version. didn't work too
6.now the phone doesn't show up unlock required page.nor the 32 time puk requirements just no-service and emergency call only
7.the non-att sim card is activated and working .
so,it seems strange thing happened, can anyone tell me what can I do ? or how to pull up the 32 times puk page?
I have the code to unlock my phone , but I don't see anywhere to put it. I change the sim to another provider and it boots up just fine without asking for any code. In the simlock menu I have an X next to NETWORK and a number 10 at the end.
How do i go about using this code?
I have a D5306.
Have you tried doing this yet...?
For most Sony phones, You must power the phone on with unaccepted SIM card, wait for a few seconds until the phone screen asks for a network unlock pin code. When you see the message, enter the code obtained from Us.
In other cases, mostly in new models can be used #987654321#.
How You can check codes counter:
1. Turn on the phone whithout sim card
2. Lock screen
3. Press sequence: Menu, Back, Back, Menu, Back, Menu, Menu, Back
4. Select Service info
5. Select SimLock
6. Check where is X
7. If X is on NETWORK and value is different than zero, you can unlock your phone.
8. If it is zero unlock by code is NOT available. The counter is blocked.
1. Turn on the phone whithout sim card
2. Type *#*#7378423#*#*
3. Select Service info
4. Select SimLock
5. Check where is X
6. If X is on NETWORK and value is different than 0, you can unlock your phone.
7. If it is 0 unlock by code is NOT possible.
The counter is blocked.
In new models can be used #987654321#.
Yeah, tried that already. Thanks.
Baseband/modem I747UCUFNJ2, stock 4.4.2 rooted. Phone from AT&T working ok with Claro Brazil (code unlocked) . After upgrading, lost IMEI. Flashed new modem and IMEI and IMEISV ok now. Checked IMEI number, is the same printed behind battery on phone. But now can not make calls. Got message 'No SIM card'. Ordered a Sim card tray, replaced it, but got same message. Phone has strong carrier signal. After reading a lot, I ordered a paid unlock code, but seller stated that code doesnt work in android 4.2.2. Even though, I tried to insert it once. (#@7465625*638*# - have to use it since phone doesnt ask for code at starting). As stated by seller, got message 'unlocked unsucessfull'. So now, what can I do to unlock the fone ? I have access to a hiden menu by dialing *#197328640# , but dont know how to use it. I have read a lot during this week. Did no find any helpfull information. Any help will be apreciated. Sorry for my bad english.
Sounds like the baseband and bootloader and too new for the ROM. You probably need to upgrade from stock 4.2.2 to stock 4.4.2 or flash a custom ROM based on a TW-kernel.
I edited/corrected my wrong information. The phone is on 4.4.2 stock already.
Try this:
Method 1:
Go to the dial screen and press #7465625*638*#
Once prompted for code, enter 8 digit Unlock Code.
Method 2:
Turn off your Samsung phone
Insert a non-accepted sim card (different from the original carrier) and turn your phone back on.
When prompted for the unlock code type the UNFREEZE code provided. If you are not prompted, go to your dial screen and type the UNFREEZE code, now press enter, send or call. You will receive an unsuccesfull message, don't worry.
Once the phone freeze is disabled, the Network lock or SP Lock screen will appear
For Network lock enter the UNLOCK code provided. For SP Lock enter the SERVICE PROVIDER code
Your phone is now fully unlocked!
If you get "unsuccessful" again then hit Dismiss button and type *2767*3855# on phone keypad and try this procedure again (CAUTION! This will reformat all your data!).
Method 3:
You can try this method without the sim card or with the original sim card
Type #7465625*638*CODE# (CODE is the Unlock Code)
Phone deactivated message means its unlocked