Hi I've got a UK T-Mobile SDAII on contract, unlocked thanks to this forum, which I sometimes use with a French SFR pay-as-you-go card.
Somehow I've blocked the PIN on this card and have had to obtain a 7 digit PUK / Personal Unblocking Code. I can key in the code, but when I try to press the 'done' key, nothing happens.
I've also tried unblocking it via my 'Super GSM Reader' which does process the PUK, but says that the code is incorrect - although in the absence of proper instructions for the software that could be because I've not used it correctly (or because the PUK will only work in the phone?)
Any ideas how to get around this? Also, why is the PUK linked to the brand of the phone - and is this why the GSM reader didn't work?
Thanks...
Can remove simlock from HTC Cavelier and from any other HTC device.
This service is not free.
You will get unlock code in 5 minutes to 72 hours.
It will costs 50$ = 38EUR by donation to xda-developers.com - http://forum.xda-developers.com/donations.php
Please send me a Private Message for details.
P.S. you do not need to reflash, disassembly, hard reset your device!
__________________
hey brother, help us out........
Help me,please
I expect you can unclock my X02HT but Please tell me how I can find PM for my device. I do not get this meaning "PM for details".
Thanks
totally confused !
how to unlock the SIM ?
PM
tomh0411 said:
I expect you can unclock my X02HT but Please tell me how I can find PM for my device. I do not get this meaning "PM for details".
Thanks
Click to expand...
Click to collapse
PM means Private Message.
To Private message someone, just click the users name and chose from the menu.
Entering in code
Hello everyone..
Sorry to ask, but I'm a bit of a newbie. I got a code for my HTC 630 now, but I don't know how to enter it in my phone..
Can anyone help? I tried entering it from the main menu, but that didn't seem to work.
I also tried booting with a different SIM card inside from a different company, but I didn't get a unlock menu for entering my code in....
Any Cules?
Thanks
-Tom
same problem here. it doesnt ask any sim unlock code. what to do?
jellois said:
Hello everyone..
Sorry to ask, but I'm a bit of a newbie. I got a code for my HTC 630 now, but I don't know how to enter it in my phone..
Can anyone help? I tried entering it from the main menu, but that didn't seem to work.
I also tried booting with a different SIM card inside from a different company, but I didn't get a unlock menu for entering my code in....
Any Cules?
Thanks
-Tom
Click to expand...
Click to collapse
this means that your device is sim unlocked .. no need to use the code
you only use it if you insert a sim from another company and THEN it will ask you for the code
vizovizo said:
this means that your device is sim unlocked .. no need to use the code
you only use it if you insert a sim from another company and THEN it will ask you for the code
Click to expand...
Click to collapse
but my x02ht says invalid sim and then says no service.. any ideas on that?
ipratik said:
but my x02ht says invalid sim and then says no service.. any ideas on that?
Click to expand...
Click to collapse
this when the code comes in handy , you should enter the code then.
where did you get this code from ?
i am not sure about this .but. if you tried unlocking it with any other software like lokiwiz then "maybe" you should hard reset your device before trying again .
vizovizo said:
this when the code comes in handy , you should enter the code then.
where did you get this code from ?
i am not sure about this .but. if you tried unlocking it with any other software like lokiwiz then "maybe" you should hard reset your device before trying again .
Click to expand...
Click to collapse
got this from the great man "tupidsin", i.e the person who started this thread. but still as of now i am unable to do it...
ipratik said:
got this from the great man "tupidsin", i.e the person who started this thread. but still as of now i am unable to do it...
Click to expand...
Click to collapse
ok lets the steps .
when you turn off your phone and insert another sim from another comapnyand on again - make sure your phone is not in flight mode- you should get something like
"SIM Lock
You have tried X times , please wait until timout
to make an emergancy call, type emergency nimber then tap emergancy "
and a ext box right under it ,and the ok button is dimmed
then after a while the ok is active again , you shloud then enter the code you got from tupidsin and it should work.
vizovizo said:
ok lets the steps .
when you turn off your phone and insert another sim from another comapnyand on again - make sure your phone is not in flight mode- you should get something like
"SIM Lock
You have tried X times , please wait until timout
to make an emergancy call, type emergency nimber then tap emergancy "
and a ext box right under it ,and the ok button is dimmed
then after a while the ok is active again , you shloud then enter the code you got from tupidsin and it should work.
Click to expand...
Click to collapse
thanks for sharing the knowledge. will try and get back to you as soon as it is done..
Hi, I tried to do vizovizo's adovice, but I couldn't. I maybe misunderstood right?
1 turn on phone
2 wait for appearance of invalid sim and emergency call diplay
3 input 911
4 tap emergency
repeat again to no.2
I don't understand "a ext box right under it".
Sorry, help me out!!
vizovizo said:
ok lets the steps .
when you turn off your phone and insert another sim from another comapnyand on again - make sure your phone is not in flight mode- you should get something like
"SIM Lock
You have tried X times , please wait until timout
to make an emergancy call, type emergency nimber then tap emergancy "
and a ext box right under it ,and the ok button is dimmed
then after a while the ok is active again , you shloud then enter the code you got from tupidsin and it should work.
Click to expand...
Click to collapse
[email protected] said:
Hi, I tried to do vizovizo's adovice, but I couldn't. I maybe misunderstood right?
1 turn on phone
2 wait for appearance of invalid sim and emergency call diplay
3 input 911
4 tap emergency
repeat again to no.2
I don't understand "a ext box right under it".
Sorry, help me out!!
Click to expand...
Click to collapse
I never said tap on the emergency . you are going to get yourself into trouble man .. really calling 911 to unlock your device ..
the steps are
1- turn off device .
2- put "another" sim from "another" compay"
3- turn on the device
4- enter you unlock code in the "TEXT box" -i missed the t before the ext sorry-
5-press ok
if the code is not right you will get an "invalid code " message
where did you get your code from ?
Thank you for your big help
sorry to bother you. probably I'm getting yourself into trouble...
I got a code from tupisdin, then,
I enter the code into text box for emergency number,
but OK was not appeared, just emergecy button is dimmed.
Just in case, write under what I did.
1- turn off device .
2- put "another" sim from "another" compay"
3- turn on the device (of course, I'm sure that it is not fright mode)
4- wait for a while, then it was displaied TEXT box under "SIM Lock, You can still make emergency calls if your service..."
5- enter unlock unlock code in the "TEXT box"
6- keep to dim "Emergency" button...
I probably mistook right?
[email protected] said:
Thank you for your big help
sorry to bother you. probably I'm getting yourself into trouble...
I got a code from tupisdin, then,
I enter the code into text box for emergency number,
but OK was not appeared, just emergecy button is dimmed.
Just in case, write under what I did.
1- turn off device .
2- put "another" sim from "another" compay"
3- turn on the device (of course, I'm sure that it is not fright mode)
4- wait for a while, then it was displaied TEXT box under "SIM Lock, You can still make emergency calls if your service..."
5- enter unlock unlock code in the "TEXT box"
6- keep to dim "Emergency" button...
I probably mistook right?
Click to expand...
Click to collapse
Same problem with me. i have an x02ht and also have a code but it doesnt ask me any sim unlock code. only button active is emergency button. i press ok button but nothing happens. i put the unlock code in the text box and i also tried to push the green phone button but no movement.
any clues?
[email protected] said:
Thank you for your big help
sorry to bother you. probably I'm getting yourself into trouble...
I got a code from tupisdin, then,
I enter the code into text box for emergency number,
but OK was not appeared, just emergecy button is dimmed.
Just in case, write under what I did.
1- turn off device .
2- put "another" sim from "another" compay"
3- turn on the device (of course, I'm sure that it is not fright mode)
4- wait for a while, then it was displaied TEXT box under "SIM Lock, You can still make emergency calls if your service..."
5- enter unlock unlock code in the "TEXT box"
6- keep to dim "Emergency" button...
I probably mistook right?
Click to expand...
Click to collapse
does it say you must wait for timeout ?
if it does you will ave to wait for a whil until the timeout is over and then the ok button will be active
how any times did you try to enter it ?
could you please post the full text that appears on your screen
ipratik said:
Same problem with me. i have an x02ht and also have a code but it doesnt ask me any sim unlock code. only button active is emergency button. i press ok button but nothing happens. i put the unlock code in the text box and i also tried to push the green phone button but no movement.
any clues?
Click to expand...
Click to collapse
please post the text that appears on yout device
Thanks for your suports
>does it say you must wait for timeout ?
Just in case, What does it mean "timeout"?
I think "timeout" means it appears "SIM Lock, You can still make emergency calls if your service provider supports it.".
>could you please post the full text that appears on your screen
OK, I'm going to write followings...
1. Turn on device
2. Start up WM6
3. appears Main Screen of WM6 Std.
4. almost 60 sec later, appears followings
+-------------------------------------------------------+
+-------------------------------------------------------+
SIM Lock. You can still make emergency calls
if your service provider supports it.
+---------------+
| |
+---------------+
+-------------------------------------------------------+
Emergency
+-------------------------------------------------------+
5. I wated for a while(3min over), no change screen, no appear "OK"
and "Emergency" is still dimmed.
notes) If I type "911", then "Emergency" will be active.
6. Next, I enter unlock code and wait(3min over)...but no change, no appear
+-------------------------------------------------------+
+-------------------------------------------------------+
SIM Lock. You can still make emergency calls
if your service provider supports it.
+---------------+
|**********|
+---------------+
+-------------------------------------------------------+
Emergency
+-------------------------------------------------------+
7. push green phone button... flash screen... but no change
and "Emergency" is still dimmed.
That's all what I did.
Please tell me futher detail information.
If you want to know more for it, let me know what you want except unlock code.
Had purchased an ZTE Flip phone for $39 at AT&T San Francisco year back and used for couple of months. Now it is in India and I would like to use this for my father. However it requires unlock PIN
I tried raising request with AT&T support no help so far even though I provided my purchase receipt. Can someone help me ??
Regards
sorry for bump but this is what they gave me to do and it worked im sure its only device specific though.
UNLOCK CODE: 7944095643573280
We have reviewed your request and confirmed that the device may be unlocked. Please allow 24 hours upon receipt of this notification to complete the unlock process.
To unlock your device, simply:
Five unsuccessful unlock attempts permanently locks the device to the AT&T network.
1)
ZTE Unlock Using a Non-AT&T SIM Card
1.Insert a non-AT&T SIM card.
2.Power on the device.
3.The device displays “Phone locked. Please insert a valid SIM card.”
4.Select Unlock (left soft key).
5.The device displays “Please enter network unlock code (16 digits). Remaining: X.”
6.Enter the 16-digit unlock code.
7.Select OK (left soft key).
8.Select OK to reset the device.
ZTE Unlock Using an AT&T SIM Card
1.Insert an AT&T SIM card.
2.Power on the device.
3.Enter *983*865625# in idle mode.
4.Select Unlock (left soft key).
5.The device displays “Please enter network unlock code (16 digits). Remaining: X.”
6.Enter the 16-digit unlock code.
7.Select OK (left soft key).
8.Select OK to reset the device.
Thank you for your business. For other questions about our AT&T wireless service or other Mobile devices, please visit att.com
Baseband/modem I747UCUFNJ2, stock 4.4.2 rooted. Phone from AT&T working ok with Claro Brazil (code unlocked) . After upgrading, lost IMEI. Flashed new modem and IMEI and IMEISV ok now. Checked IMEI number, is the same printed behind battery on phone. But now can not make calls. Got message 'No SIM card'. Ordered a Sim card tray, replaced it, but got same message. Phone has strong carrier signal. After reading a lot, I ordered a paid unlock code, but seller stated that code doesnt work in android 4.2.2. Even though, I tried to insert it once. (#@7465625*638*# - have to use it since phone doesnt ask for code at starting). As stated by seller, got message 'unlocked unsucessfull'. So now, what can I do to unlock the fone ? I have access to a hiden menu by dialing *#197328640# , but dont know how to use it. I have read a lot during this week. Did no find any helpfull information. Any help will be apreciated. Sorry for my bad english.
Sounds like the baseband and bootloader and too new for the ROM. You probably need to upgrade from stock 4.2.2 to stock 4.4.2 or flash a custom ROM based on a TW-kernel.
I edited/corrected my wrong information. The phone is on 4.4.2 stock already.
Try this:
Method 1:
Go to the dial screen and press #7465625*638*#
Once prompted for code, enter 8 digit Unlock Code.
Method 2:
Turn off your Samsung phone
Insert a non-accepted sim card (different from the original carrier) and turn your phone back on.
When prompted for the unlock code type the UNFREEZE code provided. If you are not prompted, go to your dial screen and type the UNFREEZE code, now press enter, send or call. You will receive an unsuccesfull message, don't worry.
Once the phone freeze is disabled, the Network lock or SP Lock screen will appear
For Network lock enter the UNLOCK code provided. For SP Lock enter the SERVICE PROVIDER code
Your phone is now fully unlocked!
If you get "unsuccessful" again then hit Dismiss button and type *2767*3855# on phone keypad and try this procedure again (CAUTION! This will reformat all your data!).
Method 3:
You can try this method without the sim card or with the original sim card
Type #7465625*638*CODE# (CODE is the Unlock Code)
Phone deactivated message means its unlocked
Hey all! I have an almost brand-new LG Rebel 4, LML212VL. It has a Qualcomm Snapdragon 425 (MSM8917) SoC. I'm looking to root it. I don't have any other device that I can use, only the phone. Any help is appreciated. I've looked at this thread, but when I install poot and run it, it simply says "Invalid Qt version" and closes. I don't have any computer. Thank you!
Bump
anything?
kel5isgod said:
anything?
Click to expand...
Click to collapse
I have the same model phone. If I find a root guide for it I'll let you know. Have you tried asking in the lg threads? Maybe go over there and ask around also.
Hello,
I have this phone LG LML212VL. Need to carrier unlock. Any help? I had this sent to me but still could not get anything to work.
How can you check if my Android phone asks for the unlock code?
Option 1
1 - Dial the following sequence on your phone’s keypad as if you were going to make a call:
2945#*model number of your LG#
To find out the model number of your LG:
Settings - About Phone - Model
On the sticker under the battery
For example: If you have an LG 610 type 2945#*610#
2 - The sequence typed will provide access to a hidden unlocking submenu with the following sections:
Network Lock
Service Provider Lock
Network Subset Lock
Corporate Lock
SIM Lock
3 - Check your phone prompts for the unlock code correctly under Network Lock or Service Provider Lock. If it does, you can submit your unlocking request.
Option 2
Insert a SIM card different to the Tracfone - U.S.A. network.
You will be asked to "Enter network unlock code" or for the "SIM network unlock PIN".
Click to expand...
Click to collapse
Good luck. BEst bet would be to check out "cdma-yemen" they are a talented team of Yemen coders. They always deal with Tracfone and can unlock about anything!