I have the code to unlock my phone , but I don't see anywhere to put it. I change the sim to another provider and it boots up just fine without asking for any code. In the simlock menu I have an X next to NETWORK and a number 10 at the end.
How do i go about using this code?
I have a D5306.
Have you tried doing this yet...?
For most Sony phones, You must power the phone on with unaccepted SIM card, wait for a few seconds until the phone screen asks for a network unlock pin code. When you see the message, enter the code obtained from Us.
In other cases, mostly in new models can be used #987654321#.
How You can check codes counter:
1. Turn on the phone whithout sim card
2. Lock screen
3. Press sequence: Menu, Back, Back, Menu, Back, Menu, Menu, Back
4. Select Service info
5. Select SimLock
6. Check where is X
7. If X is on NETWORK and value is different than zero, you can unlock your phone.
8. If it is zero unlock by code is NOT available. The counter is blocked.
1. Turn on the phone whithout sim card
2. Type *#*#7378423#*#*
3. Select Service info
4. Select SimLock
5. Check where is X
6. If X is on NETWORK and value is different than 0, you can unlock your phone.
7. If it is 0 unlock by code is NOT possible.
The counter is blocked.
In new models can be used #987654321#.
Yeah, tried that already. Thanks.
Related
I got my unlock code from AT&T, but they told me I must enter a non-ATT SIM to enter the code.
In searching the forum, the CDMA Rhodium apparently has a security menu under Settings-> Personal where you can enter it. That icon doesn't seem to exist on the Tilt 2.
Anyone know where to enter the pin?
You need to insert a non ATT sim card - start up your phone - a screen will pop up asking you to enter the unlock code - after you enter it, hit "ok".
That is all you need do.
Had purchased an ZTE Flip phone for $39 at AT&T San Francisco year back and used for couple of months. Now it is in India and I would like to use this for my father. However it requires unlock PIN
I tried raising request with AT&T support no help so far even though I provided my purchase receipt. Can someone help me ??
Regards
sorry for bump but this is what they gave me to do and it worked im sure its only device specific though.
UNLOCK CODE: 7944095643573280
We have reviewed your request and confirmed that the device may be unlocked. Please allow 24 hours upon receipt of this notification to complete the unlock process.
To unlock your device, simply:
Five unsuccessful unlock attempts permanently locks the device to the AT&T network.
1)
ZTE Unlock Using a Non-AT&T SIM Card
1.Insert a non-AT&T SIM card.
2.Power on the device.
3.The device displays “Phone locked. Please insert a valid SIM card.”
4.Select Unlock (left soft key).
5.The device displays “Please enter network unlock code (16 digits). Remaining: X.”
6.Enter the 16-digit unlock code.
7.Select OK (left soft key).
8.Select OK to reset the device.
ZTE Unlock Using an AT&T SIM Card
1.Insert an AT&T SIM card.
2.Power on the device.
3.Enter *983*865625# in idle mode.
4.Select Unlock (left soft key).
5.The device displays “Please enter network unlock code (16 digits). Remaining: X.”
6.Enter the 16-digit unlock code.
7.Select OK (left soft key).
8.Select OK to reset the device.
Thank you for your business. For other questions about our AT&T wireless service or other Mobile devices, please visit att.com
I ordered a Samsung Galaxy SIII (US-Cellular) on ebay and tried to follow the instructions below:
1. Type *#197328640# and it brings up the factory service menu
2. Select (1) UMTS
3. Select (1)Debug Screen
4. Select (8) Phone Control
5. Select (6)Network lock
6. Inside the Network lock menu, Pick option (3) Perso SHA256 off, Passed that is a screen that says something like "no options in this menu, current command is 11863", Wait for 30-60 secs, from there hit the menu button on bottom left of phone to bring up options, Select "Back".
7. The last command should have brought you back into the Network Lock menu, at the bottom is (4) NW Lock NV Data Initialize, Select it. You might be asked a saftey are you sure, some people not, after it begins that process wait a good 60 sec the reboot. Thats it! Phones Unlocked
Somehow the phone is not reacting on the USSD 'secret' codes. I can push the hash-button, but nothing happens. I found on a forum that I should root my phone. So I did through Odin. But superSU keeps crashing and I get the error: Security Notice, an attempt to access a secure area...
I don't really need a rooted phone, would be nice, but I would like to use USSD codes, like *#06# for example.
R530 is CDMA based and might not function correctly on TMo.
Also, USSD codes only work on TW-Based ROMs or stock. Root should have no bearing.
Diego_AL said:
I ordered a Samsung Galaxy SIII (US-Cellular) on ebay and tried to follow the instructions below:
1. Type *#197328640# and it brings up the factory service menu
2. Select (1) UMTS
3. Select (1)Debug Screen
4. Select (8) Phone Control
5. Select (6)Network lock
6. Inside the Network lock menu, Pick option (3) Perso SHA256 off, Passed that is a screen that says something like "no options in this menu, current command is 11863", Wait for 30-60 secs, from there hit the menu button on bottom left of phone to bring up options, Select "Back".
7. The last command should have brought you back into the Network Lock menu, at the bottom is (4) NW Lock NV Data Initialize, Select it. You might be asked a saftey are you sure, some people not, after it begins that process wait a good 60 sec the reboot. Thats it! Phones Unlocked
Somehow the phone is not reacting on the USSD 'secret' codes. I can push the hash-button, but nothing happens. I found on a forum that I should root my phone. So I did through Odin. But superSU keeps crashing and I get the error: Security Notice, an attempt to access a secure area...
I don't really need a rooted phone, would be nice, but I would like to use USSD codes, like *#06# for example.
Click to expand...
Click to collapse
What you are trying to do is unlock the phone from US Cellular to use on T-Mo. If that's the case, you will have to downgrade the firmware to Android version 4.1.1. This does not require Rooting. You will see appropriate firmware on SamMobile.com. Try the same process after the downgrade.
Don't try the downgrade if you are on android 4.3. It will Hard Brick your phone.
Does anyone know how to get to the network lock from the service more for a sm910a?
i bought a unlock code from the celluar unlock.net..failed...didnt get any PUK error so all good there
ive tried numerious ways of entering the defreeze code and call that still failed... now they want me to do a factory reset and i dont want to do that just yet...
Ive done the non att sim trick...ive done
The following code brought up the network unlock prompt #7465625*638*# tells me unlock cone is sucessful
im trying to get to the network lock function through the service menu. Ive tried :
· Dial *#197328640#
· Press the Menu > Back > Menu
· Open the Key input and enter 1, then press OK
· Press Menu > Back
· Press UMTS > Debug Screen > Phone Control > Network Lock
· Press Options > Perso SHA256 OFF
· Press Menu > Back
· Press COMMON > NW Lock NV Data INITIALLIZ
· Your Samsung Galaxy Note 3 is now SIM unlocked
None of that above gets me there:
This takes me to the debug screen but from there I cant get to the network lock:
Do the same for *#197328640#. That will open the Debug Screen.
service mode *#27663368378#
*#6328378#
One thing I havent tried is because the phone is ATT but I have it on a Straight Talk SIM for the BYOP is to go into the APN settings and switch it from the Straight talk APN settings to the ATT Nextgenphone option and then prompt to do the sim there... NEVERMIND DID THAT AND IT FAILED
Any ideas guys??
Ive read place online to unlock it via usb cable but it says it wipes the data so im wondering how that works
might have to see if there is any option for KIES.....
.....no wonder why people already buy them unlocked...
hello i have a s8 edge how can i get access on network lock menu?
Root work with kingroot 456
Baseband/modem I747UCUFNJ2, stock 4.4.2 rooted. Phone from AT&T working ok with Claro Brazil (code unlocked) . After upgrading, lost IMEI. Flashed new modem and IMEI and IMEISV ok now. Checked IMEI number, is the same printed behind battery on phone. But now can not make calls. Got message 'No SIM card'. Ordered a Sim card tray, replaced it, but got same message. Phone has strong carrier signal. After reading a lot, I ordered a paid unlock code, but seller stated that code doesnt work in android 4.2.2. Even though, I tried to insert it once. (#@7465625*638*# - have to use it since phone doesnt ask for code at starting). As stated by seller, got message 'unlocked unsucessfull'. So now, what can I do to unlock the fone ? I have access to a hiden menu by dialing *#197328640# , but dont know how to use it. I have read a lot during this week. Did no find any helpfull information. Any help will be apreciated. Sorry for my bad english.
Sounds like the baseband and bootloader and too new for the ROM. You probably need to upgrade from stock 4.2.2 to stock 4.4.2 or flash a custom ROM based on a TW-kernel.
I edited/corrected my wrong information. The phone is on 4.4.2 stock already.
Try this:
Method 1:
Go to the dial screen and press #7465625*638*#
Once prompted for code, enter 8 digit Unlock Code.
Method 2:
Turn off your Samsung phone
Insert a non-accepted sim card (different from the original carrier) and turn your phone back on.
When prompted for the unlock code type the UNFREEZE code provided. If you are not prompted, go to your dial screen and type the UNFREEZE code, now press enter, send or call. You will receive an unsuccesfull message, don't worry.
Once the phone freeze is disabled, the Network lock or SP Lock screen will appear
For Network lock enter the UNLOCK code provided. For SP Lock enter the SERVICE PROVIDER code
Your phone is now fully unlocked!
If you get "unsuccessful" again then hit Dismiss button and type *2767*3855# on phone keypad and try this procedure again (CAUTION! This will reformat all your data!).
Method 3:
You can try this method without the sim card or with the original sim card
Type #7465625*638*CODE# (CODE is the Unlock Code)
Phone deactivated message means its unlocked