i have a orange m3100 version of the hermes.
recently i flashed it with schaps 3.54b rom
now i can't use my wifi router/network @ home nor another wifi router/network @ work.
in fact i'm well connected, i'm sure of this because from another computer of the networks, i can ping the (static) ip of my hermes. i tried changing and changing again my ip and tested it.
but the hermes cant go on internet.
i use the right gateway and DNS in each case but no surf in pocket ie.
any solutions or other tests i can do?
in french if possible since i and my rom are in french.
thank you.
update : i made some tests :
it is nos a dns problem : i put the right gateway and dns on the smartphone but i cant get a website by typing its ip in pocket ie adress bar (other browsers dont work better) and i cant even access my router admin interface.
when i'm trying wifi with static ip or dhcp on my m3100, i can ping its ip from another computer of my networks and the smartphone responds ok, and i can see its mac adress in the connected clients on my router config screen. But the smartphone can't ping anyone.
i asked a friend who told me that the proxy (192.168.10.100 :8080 ) used for the connection to orangeworld in gprs/edge is also used when i try to connect via wifi and that is why it cant connect nowhere because my personal network is configured differently and without a proxy.
if i delete the proxy my connections will cost me more when i use gprs.
if i configure my router like this (192.168.10.xxx) with a proxy on 8080 it could work but only on my network and not @ my workplace or somewhere else where network params will be different.
any ideas or solutions ?
wow ! so many people trying to help :/
well i found a temporary solution to my problem, probably not the best one but the best i can do by myself so if someone wants to help : thank you
it was actually a proxy problem.
i looked in the registry and found a key where the proxy adress was detailed : 192.168.10.100:8080
i have exported this value as "proxon.reg"
then i modified the value by deleting its content and i exported the empty value as "proxoff.reg"
now i have my "proxy switch".
before activating the wifi and starting ie, i lauch "proxoff.reg" which clean the registry for the proxy data and magic : ie connects fine.
and when i want tu surf via my provider orange, i desactivate the wifi and launch "proxon.reg" which restore the correct proxy data to the registry. and i can surf on gprs/edge.
all this is fine when i switch off the phone functions in the comm manager.
but now i need someone to tell me how i can automatize this for the wifi and edge connections because if the wifi signal gets too weak, i dont want my phone to switch to the gsm when the proxy is desactivated.
i hope you can understand my english.
please help.
In the last version of BatteryStatus (http://forum.xda-developers.com/showthread.php?t=270751) you can find,among the others stuffs, the "Disable Proxy for WiFi" option (see the Tools tab)... Maybe more simple than "regg-in" on and off? I'm ok with it, try and see if it's ok for you also...
Bye!
hey kamaal i just downloaded the batterstatus program but im not seeing the "Disable Proxy for WiFi" option in the Tools tab
***edit:
sorry i downloaded the extended version beta and it was there
Hi,
Can anybody pls teach me how to set up multiple wireless network adaptor profiles so that i don't have to do it manually everytime i change access points?
Example, my home has an access point which uses 'use server asigned ip address' but my work place requires me to use 'specific assigned ip address'. And its really troublesome to switch them manually everytime.
Is there a way to create a profile such that when its at work, my pda knows to use the specific ip address and when at home, it can automaticly switch to server assigned ip address?
help will be very much appreciated.
Hi !!
I had the same problem and I tried several programa but the best I found was WiFi profile, maybe a little bit ostic to configure but then very usefull to use.
You can find the latest here, is on developing.
http://blog.renestein.net/Wifi+Profiles+For+Windows+Mobile+English+Version.aspx
Bye, Carlo.
Hey everyone,
I just got a brand new HTC Desire yesterday and I can't seem to connect my phone to the internet via WiFi. I don't know why but I entered the right password and everything... Every time it goes 'Obtaining IP address from (router name)', but ends up unsuccessful. I tried forgetting and doing it again but still does not work. Anyone have any ideas? Please let me know what information I should post to solve this matter quicker. I'm running on 2.1 update1
[SOLVED]
It seems that most HTC Android phones are very fussy about the routers they will reliably connect to. Whether it's a really a phone problem, or the router that is at fault isn't really known.
Try changing the channel and/or encryption method on your router, as this may help.
Regards,
Dave
Solution
I found my way around solving this issue. Here's how I solved my problem:
Problem: Unable to connect to WiFi. Able to scan network but 'Unsuccessful' everytime WiFi attempts to 'Obtain IP Address from (network name)'.
Solution:
1) Press Menu key under WiFi window on HTC Desire
2) Choose Advanced Settings
3) Under IP Settings, Check 'Use Static IP'
4) Insert all the information below that: IP address, Gateway, Netmask, DNS1, DNS2 (it should all be in numbers)(I only had one DNS1, so I typed the same numbers in DNS2)
You can get the information via Laptop:
Right Click on your network>select 'Status'>select 'Details' under signal quality>All the information you need
5) Once all information is filled in, press 'Return' key and it SHOULD connect successfully.
Additional Notes: I selected the WiFi network and entered the passkey before I did all the steps above.
Hopefully this helps those who had the same problem I did!
Haven't you just given your Desire the same IP address as your laptop??
If your wireless network is set up to use DHCP, you shouldn't need to do any of this.
Regards,
Dave
I dont understand why also but IT WORKS! Rightfully, mine is running on dynamic IP. Will it have any problem connecting again once IP address is refreshed?
jxleung said:
I found my way around solving this issue. Here's how I solved my problem:
Problem: Unable to connect to WiFi. Able to scan network but 'Unsuccessful' everytime WiFi attempts to 'Obtain IP Address from (network name)'.
Solution:
1) Press Menu key under WiFi window on HTC Desire
2) Choose Advanced Settings
3) Under IP Settings, Check 'Use Static IP'
4) Insert all the information below that: IP address, Gateway, Netmask, DNS1, DNS2 (it should all be in numbers)(I only had one DNS1, so I typed the same numbers in DNS2)
You can get the information via Laptop:
Right Click on your network>select 'Status'>select 'Details' under signal quality>All the information you need
5) Once all information is filled in, press 'Return' key and it SHOULD connect successfully.
Additional Notes: I selected the WiFi network and entered the passkey before I did all the steps above.
Hopefully this helps those who had the same problem I did!
Click to expand...
Click to collapse
A BIG THANK YOU..have been trying to connect with all possibilities minus setting up the static as Im using dynamic which doesnt make sense.
Keep in mind that you have to give all your devices on that network then a static ip-adres, because otherwise you run the risk of another device already having the ip you assigned to your phone.
So is there a valid (non-static IP) solution????
I just got this problem both at home and at other places as well.
I can't find any errors in Android, and wifi scans as it should, it connects but as the topic starter stats, it can't assign an IP-adress!
Static IP is not a solution for me, nor should be for anyone, this is basic function that should work with out issues.
Please advise if there is any, thanks in advance!
Connecting to Wifi Unsuccessful [NOT SOLVED]
boas said:
Static IP is not a solution for me, nor should be for anyone, this is basic function that should work with out issues.
Please advise if there is any, thanks in advance!
Click to expand...
Click to collapse
I was able to connect but noted that my phone wouldn't even completely charge, got hot and emptied in about an hour, so I installed "Startup Auditor" and" JuiceDefender" but somehow these seem to have broken the Wifi. I uninstalled JuiceDefender and there's nothing disabled in Startup Auditor that could explain it. But the phone can see Wifi points, but can't connect.
Wassup?
Of course it's possible that as the phone is rooted, juicedefencer changed something as root and I have no idea how to change it back.
glad u got it fixed!
i'm using alcaltel one touch idol x 6040D. I did try to update my phone by using the Mobile Upgrade S4.0.6. Followed the instructions but then interrupted due to I dont know. When i switch on back the phone, i try turn on the wifi and bluetooth and it didnt work. Then I checked at the phone status and apparently it shows that wifi mac address and bluetooth address are unavailable. So how to solve this? Any solutions for this?
I had same problem .. Stay here for solution
My S4 mini (GT-9192) running cm13 cannot connect to the WiFi network and the mac address shows 02:00:00:00:00:00 rather that the unique address it is supposed to have. My question is how can I fix this? any help will be appreciated.
EDIT: a soft reboot fixes the problem temporarily. If there is any permanent solutions,please let me know