Hi everyone,
pardon me for my noobiness
I have tried cf autoroot step by step with caution. but my device still stays unrooted.
i have i747 at&t with 4.1.2
in odin i does see everything as good, but no SuperSU app.
root checker goes in infinte loop returns nothing, Tibu says device not rooted.
do i have options?
i want to stick to 4.1.2 TW stock with root access, twrp and triangle away to reset my counter.
as I already used CW 10.2 JB 4.3 and was missing my ugly touchwiz, camera, multiwindow
mr.squiggly said:
Hi everyone,
pardon me for my noobiness
I have tried cf autoroot step by step with caution. but my device still stays unrooted.
i have i747 at&t with 4.1.2
in odin i does see everything as good, but no SuperSU app.
root checker goes in infinte loop returns nothing, Tibu says device not rooted.
do i have options?
i want to stick to 4.1.2 TW stock with root access, twrp and triangle away to reset my counter.
as I already used CW 10.2 JB 4.3 and was missing my ugly touchwiz, camera, multiwindow
Click to expand...
Click to collapse
If the auto root worked (rebooted into recovery and did it's thing) than just download SuperSU from the play store. Update the binary by opening the app and than recheck for root.
Sent from my SGH-I747 using xda app-developers app
after trying for 5 times, it worked.
i am rooted now.
but have another issue, gave my google account for phone setup. also used mrrobinson debloater.
noticed that none of my apps from playstore are getting installed on my phone.
is it because mrrobinsoon debloater deleted something or its just me , a noob..
pls help.
I have looked around and can't seem to get a straight answer about this. I have a stock rooted gn2, if i update over the air will it brick it? At the moment i have the att updater frozen with titanium backup. Any insight would be greatly appreciated, happy holiday!
where have you been searching? This has been covered dozens of times...
sorry
could you possibly provide a link sir?
generally speaking you can NOT take/install any OTA update when you are rooted...most OTA updates wont install if a custom recovery is detected.
99% of the time it wont work, .09% of the time it might install but you will have all sorts of issues, and .01% of the time it will work..
I think that pretty much covers it; you should probably just be patient and wait until the dev's incorporate it into a custom rom, and then you wont have to unroot to "enjoy" what ever the wonderful features are that ATT was so kind to include in their update..
And the install checks for stock system
You can install if you have stock rom. Root doesn't matter. My phone was rooted with stock room and twrp recovery. I just flashed stock recovery back. I had my superuser integrated in system partition. After Ota, i upgraded superuser apk. It then disabled Knox and download latest su binary.
So successful update with root preserved. Pm me of you need help
Sent from my SAMSUNG-SGH-I317 using Tapatalk
WARNING :
If you take the official OTA to 4.3 while root is present...you WILL trip the KNOX counter in your boot loader.
And if you root after an official 4.3 update you WILL trip KNOX anyway..
My .02....DO NOT UPDATE....
Stay rooted on the old bootloader and flash a custom 4.3 rom.....g
Wife is getting a new AT&T note 2 on the 24th (it already shipped). I would assume it doesn't have the OTA on it yet. Can you just reject the OTA when it arrives? Or will it try to install automatically on the new phone. Any way to prevent that until I can get my hands on it (have time tio mess with it).
Anyone try flashing a rom After ota update?
Did you thank your Developer today?
Same boat
I too have a stock rooted 4.1.2. OTA fails as root present, got that. All I need is a stock 4.3 root. I have read several posts and still unclear as to what to do. I have either missed it or just not found the answer.
Do I need to unroot via SuperSU? then OTA? Odin flash a stock ROM?
Please don't bash as I am only seeking an answer. And any help is greatly appreciated!
cordless89 said:
I too have a stock rooted 4.1.2. OTA fails as root present, got that. All I need is a stock 4.3 root. I have read several posts and still unclear as to what to do. I have either missed it or just not found the answer.
Do I need to unroot via SuperSU? then OTA? Odin flash a stock ROM?
Please don't bash as I am only seeking an answer. And any help is greatly appreciated!
Click to expand...
Click to collapse
I had stock rooted 4.1.2 with cwm as my recovery. I did the ota update. After the update, cwm wanted to fix root but couldn't. Essentially I lost root. Next, I re-rooted with CF-Auto-Root. I then installed SuperSU from play store which disabled Knox. Using GooManager I flashed TWRP. The last issue was wifi wasn't working. I used Odin to flash this file: http://d-h.st/OYC (unzip and use the tar in Odin). Wifi restored. Overall I like this update. It's faster and smoother.
Having said all this, I do not recommend anyone use this method. It's much cleaner to unroot then update. Or better yet, as suggested before, use one of the custom 4.3 roms.
flymacs said:
I had stock rooted 4.1.2 with cwm as my recovery. I did the ota update. After the update, cwm wanted to fix root but couldn't. Essentially I lost root. Next, I re-rooted with CF-Auto-Root. I then installed SuperSU from play store which disabled Knox. Using GooManager I flashed TWRP. The last issue was wifi wasn't working. I used Odin to flash this file: link removed (unzip and use the tar in Odin). Wifi restored. Overall I like this update. It's faster and smoother.
Having said all this, I do not recommend anyone use this method. It's much cleaner to unroot then update. Or better yet, as suggested before, use one of the custom 4.3 roms.
Click to expand...
Click to collapse
I noticed the OTA did not work on my nine as I got the "unable to update" after the OTA downloaded. I initially rooted via the CF-Auto flash.
Just curious as to next step.
flymacs said:
I had stock rooted 4.1.2 with cwm as my recovery. I did the ota update. After the update, cwm wanted to fix root but couldn't. Essentially I lost root. Next, I re-rooted with CF-Auto-Root. I then installed SuperSU from play store which disabled Knox. Using GooManager I flashed TWRP. The last issue was wifi wasn't working. I used Odin to flash this file: http://d-h.st/OYC (unzip and use the tar in Odin). Wifi restored. Overall I like this update. It's faster and smoother.
Having said all this, I do not recommend anyone use this method. It's much cleaner to unroot then update. Or better yet, as suggested before, use one of the custom 4.3 roms.
Click to expand...
Click to collapse
So you had no trouble flashing TWRP? I went back to 4.1.1 from Skynote, OTA'd 4.1.2 and was going to flash another ROM but my wife got my phone the next morning to play slots and she accepted the 4.3 official update before I woke up. I did root with CF Auto and disabled Knox, but was wondering if Goomanager would work.
The next question is can we flash some ROMS with the rooted OTA 4.3?
Geeve
Is there a pre-rooted stock 4.3 for the i317 AT&T available?
geeve420 said:
So you had no trouble flashing TWRP? I went back to 4.1.1 from Skynote, OTA'd 4.1.2 and was going to flash another ROM but my wife got my phone the next morning to play slots and she accepted the 4.3 official update before I woke up. I did root with CF Auto and disabled Knox, but was wondering if Goomanager would work.
The next question is can we flash some ROMS with the rooted OTA 4.3?
Geeve
Click to expand...
Click to collapse
Goomanager worked fine. No problems with twrp either.
As far as flashing on from ota 4.3, I'm not brave enough yet.
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
---------- Post added at 01:24 PM ---------- Previous post was at 01:17 PM ----------
cordless89 said:
I noticed the OTA did not work on my nine as I got the "unable to update" after the OTA downloaded. I initially rooted via the CF-Auto flash.
Just curious as to next step.
Click to expand...
Click to collapse
Did you debloat or remove any apps from the stock 4.1.2?
flymacs said:
Goomanager worked fine. No problems with twrp either.
As far as flashing on from ota 4.3, I'm not brave enough yet.
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
---------- Post added at 01:24 PM ---------- Previous post was at 01:17 PM ----------
Did you debloat or remove any apps from the stock 4.1.2?
Click to expand...
Click to collapse
Nope, pretty much as stock as you can get plus root. OTA failed but I assume reason being the root... but I'm a newbie on this stuff.
cordless89 said:
Nope, pretty much as stock as you can get plus root. OTA failed but I assume reason being the root... but I'm a newbie on this stuff.
Click to expand...
Click to collapse
Then the next question I have is if you are using the stock recovery? I was using cwm on stock rooted 4.1.2. When I did the ota, the phone rebooted into cwm. Cwm asked if I wanted to do the update. I selected yes. When it completed, the Samsung installer gave a failed to install message, but cwm showed that it completed and wanted to fix root. It couldn't fix since I was unrooted at this point. I rebooted into 4.3 non-rooted. Re-rooted...etc.
I want to say again that I don't recommend anyone follow this procedure. I'm just trying to describe how I solved my own mess and hopefully answer any questions.
I feel i have a peculiar situation. I have a Samsung Galaxy SIII SGH-T999 with the Hellfire 4.4.2 rom flashed to it. The default superuser app worked fine. But, i downloaded superuser because i like it better. I tried to update the binary but it always got stuck at the checking to make sure it is working part of the update. So, i downloaded the binary to flash through clockworkmod recovery. Now i have no root access whatsoever. I have no idea what to do. So my question is how do i regain root access and update the binary?
Hi guys,
I am sick of 4.3, My battery drains 15% in 3 hours while screen is off and phone is not in use. I want to go back to 4.1.2.
I rooted with Kingo root. It said OK.
But when i booted into the 4.3, i get an SU error, Knox is blocking it. I updated SU and it says no binary installed, manually reroot again.
Also where can i find the stock 4.1.2 Sprint rom?
Life was good then, Everything just worked, great battery life.
Thanks for the help fellas, its much appreciated.
With some trepidation, i tried to rerooth using kingo root and udated SU, and this time it asked if i wised to disable knox. *got lucky*
Which recovery should i install?
And where do i get the 4.1.2 rom from?
Appreciate the help folks.
for those in the same boat as me that need to know.
i installed Philz and went for smoothest rom. went without a hitch and am exploring it now.
asmd.
hi;
I have a roger GS3(SGH-I747M) and recently I have updated to stock 4.4.2; then I flash cf-root throuth odin; trying to get root access; however, after I boot into the phone, I always gets a force close message on the phone and cannot get root access. Does anybody know what I can do to get root access on stock 4.4.2.
Please help!!!
Watch this: https://www.youtube.com/watch?v=AZgEVM2hSnI or search for towelroot.
TWRP or CWM?
audit13 said:
Watch this: https://www.youtube.com/watch?v=AZgEVM2hSnI or search for towelroot.
Click to expand...
Click to collapse
Towelroot seems quite easy. Once I do that, what's the best way to install latest TWRP or CWM on rooted 4.4.2? I had always heard GooManager, but now it's showing as not supported and unavailable.
No need to root. Just load a custom recovery and flash a custom ROM.
Flash recovery with odin.
pokerplayer999 said:
hi;
I have a roger GS3(SGH-I747M) and recently I have updated to stock 4.4.2; then I flash cf-root throuth odin; trying to get root access; however, after I boot into the phone, I always gets a force close message on the phone and cannot get root access. Does anybody know what I can do to get root access on stock 4.4.2.
Please help!!!
Click to expand...
Click to collapse
Like someone mentioned earlier, try flashing a custom recovery (I like philz touch myself) via odin. Once you access Recovery, if your phone isn't rooted upon trying to reboot you'll see a message that says "root priviliges may be lost, root (or something like it) binary su). Choose yes and your phone will be rooted once it boots. Install SuperSU (or kush's Superuser if you'd like) and then you'll see your phone is rooted.
I used TowelRoot and had absolutely no problems whatsoever. However, 4.4.2 seems to run extremely slow on the I747 so you might consider a custom ROM. That is the route I am looking into.