So, I updated to 4.4 Kit Kat with this Play Edition ROM. But after the flash, now I'm not getting 3G. After I register on the T-Mobile network, it works until the phone goes to sleep. Everyone in the thread says to flash I9505XXUEMKE_Modem as a solution. But when I try, in Odin I get
<ID:0/007> NAND Write Start!!
<ID:0/007> Transmission Complete..
<ID:0/007> Now Writing.. Please wait about 2 minutes
<ID:0/007> Receive Response from boot-loader
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone it'self, it also says "SECURE CHECK FAIL: mdm"
Am I using the wrong modem or what? Is there some trick I'm missing?
This in the modem I flashed. Worked great. http://forum.xda-developers.com/showthread.php?t=2544612
Sent from my SGH-M919 using XDA Premium 4 mobile app
Pharylon said:
So, I updated to 4.4 Kit Kat with this Play Edition ROM. But after the flash, now I'm not getting 3G. After I register on the T-Mobile network, it works until the phone goes to sleep. Everyone in the thread says to flash I9505XXUEMKE_Modem as a solution. But when I try, in Odin I get
<ID:0/007> NAND Write Start!!
<ID:0/007> Transmission Complete..
<ID:0/007> Now Writing.. Please wait about 2 minutes
<ID:0/007> Receive Response from boot-loader
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone it'self, it also says "SECURE CHECK FAIL: mdm"
Am I using the wrong modem or what? Is there some trick I'm missing?
Click to expand...
Click to collapse
You are lucky that failed. If's the wrong modem for your phone. Flashing that could have killed the device. At best it would have soft bricked it and you would have had do an Odin flash back to stock.
Be very careful what you try to flash. The i9505 is very similar to the T Mobile model but it's not the same. The ROM's are mostly interchangable but the modems and recoveries and kernels and stuff like that aren't. You absolutely need the T MObile specific versions of those kinds of things.
The thread Okcxb linked for you is your salvation. It shoudl work fine. But be careful in the future with what you flash.
okcxb said:
This in the modem I flashed. Worked great. http://forum.xda-developers.com/showthread.php?t=2544612
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You, sir, are a gentleman and a scholar.
Skipjacks said:
The thread Okcxb linked for you is your salvation. It shoudl work fine. But be careful in the future with what you flash.
Click to expand...
Click to collapse
Thanks for the kind words Skip
Sent from my SGH-M919 using XDA Premium 4 mobile app
Related
I'm following the steps in the "[How to] Restore a semi-bricked Epic ..." thread, but my phone is getting stuck on cache.rfs. Odin sits there for about 30 mins, then fails.
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> cache.rfs
<ID:0/003> Removed!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm using a different cable, I've tried different ports, and no SD. Any suggestions?
This is a common noob mistake, but make sure you're flashing via pda, NOT Phone.
Just double checked, I'm pretty sure I was using PDA before, but just in case I redid it. Same thing tho... stuck at cache.rfs
Differnt USB ports that's what helped me
that epic be a sendin
Try another tar. That one might be bad or it was a bad download. Grab EC05 from here:
http://forum.xda-developers.com/showthread.php?t=1052813
That was it. I redowned Odin and the driver, but didn't think about the tar.
Thanks for the help!
Shinydude100 said:
This is a common noob mistake, but make sure you're flashing via pda, NOT Phone.
Click to expand...
Click to collapse
You can put it in either.
Sent from my SPH-D700
enjid said:
That was it. I redowned Odin and the driver, but didn't think about the tar.
Thanks for the help!
Click to expand...
Click to collapse
Glad to help...we all have been there.
Sent from my SPH-D700 using XDA App
ac16313 said:
You can put it in either.
Sent from my SPH-D700
Click to expand...
Click to collapse
Really? There's something that can't be odin'd under phone, its had me stuck on factory.fs until I put it in pda.
Shinydude100 said:
Really? There's something that can't be odin'd under phone, its had me stuck on factory.fs until I put it in pda.
Click to expand...
Click to collapse
I think it might have been the older Odin's
But yeah with the epic its either I believe, I was the same but it was actually the .tar
Sent from my SPH-D700
I'll take a look at what version I have, I know its not spanking new, but I totally trust you on this one, I can relate when I was rooting my cousin's boost mobile android phone, I followed a guide entirely, but rooting failed entirely because it wasn't the exact version number of odin that was on the guide, lol.
I have a sph-d700 on EI22 ginger bread and followed these instuctions >>>>>
http://forum.xda-developers.com/showthread.php?t=1339478
Odin is giving this error when i flash ACSRecovery1.0.0.5.tar.tar>>>>>>
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> ‹
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
---------------------------------------------------------------------------------------------------------
Now my phone will only display a phone and a computer when i try to turn it on unless i go back into download mode.
can some one please helpe me???
Run it again with a Blackberry cable.
Sent from my SPH-L710 using xda premium
Why ACS Recovery? That's very out of date.
Like Kenny already suggested, use another cable.
I would also suggest doing everything in here:
http://forum.xda-developers.com/showthread.php?p=13245831
Then follow my guide in the General stickies or google qbking77's video on how to root samsung epic on FC09.
XDA Moderator
nikon120 said:
Why ACS Recovery? That's very out of date.
Like Kenny already suggested, use another cable.
Click to expand...
Click to collapse
Thank you all for you reply.... I have tried two diff cables, none of them came with the phone. i have one more i think but it has copper showing and am afraid to use it. im going to ask some family if they have some i can borrow.
As for as the recovery, I dont care witch one, that one was on the forum for EI22 rooting, bc thats the one I have. Its old sprint rom but i figure it would have been easier to root then the newer OTA.
So besides using a differant cable is there anything else. Just wondering why i would follow your rooting method for FC02 if im not on that build?
The FC09 root method is universal
Sent from my SPH-D700 using Tapatalk 2
EI22 and FC09 root method are the same because they're both Gingerbread. You need to use ODIN to root.
Gingerbread requires ODIN to root for our device, whereas Froyo did not.
You want to be on FC09 because it was the last official code release. It's obviously not necessary to be on the latest code release, but is recommended. Now, you could go the other way and flash CM or any CM derivative.
Good cables can be found on eBay, Amazon, or Monoprice and for surprisingly cheap.
I'd recommend getting the up to date version of CWM for our device, or you can flash TWRP. All found in the dev forum. As for ROMs, try all the FC09 and CM derivatives out to see which fits your needs/style.
Thank you. I did the fix for semi brick and it worked great. Same cable too. Then I flashed ICS ROM. THANK YOU SO MUCH FOR YOU'RE HELP.....
Sent from my EVO using xda app-developers app
hey guys!! Need Help!!
This is the error Im getting while trying to root!!
N7100xxmd3
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Bunny2rock said:
hey guys!! Need Help!!
This is the error Im getting while trying to root!!
N7100xxmd3
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
its done install rootchecker in verify.
aukhan said:
its done install rootchecker in verify.
Click to expand...
Click to collapse
Thanks For the reply mate!!! But I'm sure Its not rooted!! There is no SuperSu app installed!! I dont know whats wrong with it??
Bunny2rock said:
Thanks For the reply mate!!! But I'm sure Its not rooted!! There is no SuperSu app installed!! I dont know whats wrong with it??
Click to expand...
Click to collapse
Which Method are you following what link could you share please
would you want try flashing the Pre rooted stock ROM http://forum.xda-developers.com/showthread.php?t=2230250
aukhan said:
Which Method are you following what link could you share please
would you want try flashing the Pre rooted stock ROM http://forum.xda-developers.com/showthread.php?t=2230250
Click to expand...
Click to collapse
Im following Dr.Keton's Post Here is the URL http://forum.xda-developers.com/showpost.php?p=31801060&postcount=2
And Its hardly been a week since i bought the Note 2 So Im kinda not looking forward flashing any Rom's even If its a Pre rooted stock ROM!!
Hope You understand!! I want to enjoy this new Phone feeling
Bunny2rock said:
Im following Dr.Keton's Post Here is the URL http://forum.xda-developers.com/showpost.php?p=31801060&postcount=2
And Its hardly been a week since i bought the Note 2 So Im kinda not looking forward flashing any Rom's even If its a Pre rooted stock ROM!!
Hope You understand!! I want to enjoy this new Phone feeling
Click to expand...
Click to collapse
A.How to root N7100
Advantages and disadvantages of each method of root.
Method 1:Root with stock Recovery
Method 2: Root with CWM recovery
Method 3 : Root with simple APK
Which method here from above ?
aukhan said:
A.How to root N7100
Advantages and disadvantages of each method of root.
Method 1:Root with stock Recovery
Method 2: Root with CWM recovery
Method 3 : Root with simple APK
Which method here from above ?
Click to expand...
Click to collapse
Pardon me for not being clear!!
Method 1:
Its Root With Stock Recovery!!
Bunny2rock said:
Pardon me for not being clear!!
Method 1:
Its Root With Stock Recovery!!
Click to expand...
Click to collapse
ok so you've tried this method 1 ok well would request you try once again try with a different version of Odin.
aukhan said:
ok so you've tried this method 1 ok well would request you try once again try with a different version of Odin.
Click to expand...
Click to collapse
Tried 3.07 ,3.04 ,even 1.85 Bro!! No luck!!!
Try different port (if on PC better on backside)
Don't use any extension cable/usb hub
Disable firewall and antivirus
Uninstall kies and just install samsung usb driver (you get from my thread you are following)
Btw flashing my prerooted rom is exactly same with rooting with option one but even without raising counter.
But if you having problem that also fail flashing prerooted rom.
Sent from my GT-N7100 using xda premium
dr.ketan said:
Try different port (if on PC better on backside)
Don't use any extension cable/usb hub
Disable firewall and antivirus
Uninstall kies and just install samsung usb driver (you get from my thread you are following)
Btw flashing my prerooted rom is exactly same with rooting with option one but even without raising counter.
But if you having problem that also fail flashing prerooted rom.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Thanks a lot bro!! Will follow your steps and get back
There a long pause at Get Pit Mapping!! Still the same result!! Rooting is not successful!! Why is it happening to me??? Faulty note 2???
While in the download mode, nothing is happening, it displays,
ODIN MODE
PRODUCT NAME: GT-N7100
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY:SAMSUNG OFFICIAL
SYSTEM STATUS : OFFICIAL
Are you sure device in download mode?
Vol down +home +power
Then you have to press Vol up in Warning screen to enter right into download mode
Sent from my GT-N7100 using xda premium
dr.ketan said:
Are you sure device in download mode?
Vol down +home +power
Then you have to press Vol up in Warning screen to enter right into download mode
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
YES BRO! I'm very sure!!!
Try on different cable and pc
Otherwise try flashing pit (must be as last resort)
Sent from my GT-N7100 using xda premium
dr.ketan said:
Try on different cable and pc
Otherwise try flashing pit (must be as last resort)
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
No luck mate!!! I'm Screwed!!
What happened?
Sent from my GT-N7100 using xda premium
dr.ketan said:
What happened?
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Tried Different cables and PC but still the same error
There is no other trick except said you. Rarely rae I have seen few cases (on note1)where device getting odin locked and nothing works
Still try calmly and follow to the letter to check nothing is missing. Note2 also reportedly not works on old usb 1 port, make sure pc you are trying having usb 2.0 port. I recommend xp machine.
Sent from my GT-N7100 using xda premium
dr.ketan said:
There is no other trick except said you. Rarely rae I have seen few cases (on note1)where device getting odin locked and nothing works
Still try calmly and follow to the letter to check nothing is missing. Note2 also reportedly not works on old usb 1 port, make sure pc you are trying having usb 2.0 port. I recommend xp machine.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Thanks for the help buddy!! Will try and get back to you guys!!
For one reason or another, i had a lot of crap on my internal storage of my Galaxy Note 2. I booted into the volume up + power + menu mode and formatted my sd card thinking that it would wipe the data and start me off fresh. However for some reason i also decided to format everything else, and now my phone is stuck on the samsung logo when i boot up, Any help guys? :/
Can you get into download mode volume down button+power button+home button?
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
yes i can, download mode right?
Cyferous said:
yes i can, download mode right?
Click to expand...
Click to collapse
Then there's hope you have a soft brick... Do you have the note 2 tool kit?... Flash the stock rom using Odin
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Do i flash with odin or the toolkit?
My friend u only need to restore to factory from within download mode.
I've tried restoring to factory, clearing cache and even flashing a stock rom with Odin. the problem is with odin I now keep getting a error message and the flash fails. I've tried using older and newer versions of odin, switching the cable and usb ports. The error message that i keep getting is:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Enter CS for MD5..
<ID:0/004> Check MD5.. Do not unplug the cable..
<ID:0/004> Please wait..
<ID:0/004> Checking MD5 finished Sucessfully..
<ID:0/004> Leave CS..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
kinda getting desperate for help here, google turned up little to no answers :/
Cyferous said:
For one reason or another, i had a lot of crap on my internal storage of my Galaxy Note 2. I booted into the volume up + power + menu mode and formatted my sd card thinking that it would wipe the data and start me off fresh. However for some reason i also decided to format everything else, and now my phone is stuck on the samsung logo when i boot up, Any help guys? :/
Click to expand...
Click to collapse
Go here download your firmware. Use Odin to flash. http://forum.xda-developers.com/showthread.php?t=1987541
The one with M behind it is Canada
Sent from my SGH-I317 using Tapatalk
Cyferous said:
Do i flash with odin or the toolkit?
Click to expand...
Click to collapse
You can either flash it using toolkit which will automatically open up Odin or just go straight to odin
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
BR7fan said:
Go here download your firmware. Use Odin to flash. http://forum.xda-developers.com/showthread.php?t=1987541
The one with M behind it is Canada
Sent from my SGH-I317 using Tapatalk
Click to expand...
Click to collapse
This HERE^^^^^^^^^^^^^^^:thumbup:
All you need is the original firmware, flash that thru Odin and you'll be back up and running...
Go to section#5 for your firmware.
[Q]
Which GN2 do you have??
Att/TMO or Rogers??
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Alright guys, thanks i fixed it. Apperently i was using the wrong stock rom verson of the N7100 instead of my SGH-T889V. The odin flash worked and now m y phones back up and running. Thanks again for all your help!
Hello,
So I installed the Rainbow 7 rom and it worked great for 2 days. Next thing I know Im stuck at the Samsung note 2 screen. Im like OK lets open TWRP and restore from Backup. Some how I manage to erase the OS and now I can't even return to Stock. When I try to flash tar I get failed. Phone does go into download mode fine and recovery. TWRP shows my sd and internal as (0) MB but when I use my ext sd card on pc all files are there so cant flash via recovery. Kies does not work either I tried the latest version of TWRP via Latest version of ODIN nothing file is good then I get The Below with OH3
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
With NE2 STOCK in Odin I GET note 2 re-partition operation failed.............
I have always been able to restore my backups or flash back to stock but this time in Stuck. Any Thoughts?
TWRP states no OS found even if I wiped all of the system and data files Should I not be able to go back to stock ? I've tried NE2 and OH3
I have searched and searched and tried but nothing seems to work. If it boots to download mode and recovery it's not a hard bricked it ??
FYI I have tried 2 pc's using different ports and different cables also
When you boot into recovery does it show failure to mount any partitions (system, data, cache)?
Sent from my LG-D851 using XDA-Developers mobile app
cidxtc said:
When you boot into recovery does it show failure to mount any partitions (system, data, cache)?
Sent from my LG-D851 using XDA-Developers mobile app
Click to expand...
Click to collapse
Hello
Yes All of them that your saying. I tried usb on the go and it appears it will install but then same thing error signal 9 and failure to mount any partitions.
Thank you For looking
any suggestions ?
Thank You
travieso1208 said:
any suggestions ?
Thank You
Click to expand...
Click to collapse
I seen a few other users with same issue. Only way that I have seen it fixed is by replacing the main board. Sorry to give bad news.
Sent from my LG-D851 using XDA-Developers mobile app
Ahhh okay thank you
Would you know if switching out the board is just plug and play ?
You could always try to Odin back to stock. Since you can get into recovery i imagine you can get into download mode.Its worth a shot before you order a board and open the phone. Link for the process I was suggest the PC version
http://forum.xda-developers.com/showthread.php?t=2780984
Edit: fixed link to reflect the correct bootloader.
Sent from my SPH-L900 using XDA-Developers mobile app
beansnorice said:
You could always try to Odin back to stock. Since you can get into recovery i imagine you can get into download mode.Its worth a shot before you order a board and open the phone. Link for the process I was suggest the PC version
http://forum.xda-developers.com/showthread.php?t=2780984
Edit: fixed link to reflect the correct bootloader.
Sent from my SPH-L900 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks I'll Give it a shot but it has failed in the past
I dont know if this matters but according to the rainbow 7 install instructions I was supposed to have bootloader of 4.3 or newer.. if i didnt could. This be the cause of everything. I can't believe there isn't a way to fix this without changing the board.
It could very well be why it fails the link above was to the 4.4.2 bootloader if it doest help or fail I have no idea about swapping out the board. I've replaced antanneas and ifixit has a complete teardown of the phone https://www.ifixit.com/Device/Samsung_Galaxy_Note_II hope you figure it out. Sorry I wasn't much more help
Sent from my SPH-L900 using XDA-Developers mobile app
beansnorice said:
It could very well be why it fails the link above was to the 4.4.2 bootloader if it doest help or fail I have no idea about swapping out the board. I've replaced antanneas and ifixit has a complete teardown of the phone https://www.ifixit.com/Device/Samsung_Galaxy_Note_II hope you figure it out. Sorry I wasn't much more help
Sent from my SPH-L900 using XDA-Developers mobile app
Click to expand...
Click to collapse
Okay Thank You I'll Def Try this
travieso1208 said:
Okay Thank You I'll Def Try this
Click to expand...
Click to collapse
Hope it helps
Sent from my SPH-L900 using XDA-Developers mobile app
So I got a clean logic board. Just have to install it and The phone should work fine ?
Thank You
Yes a new logic board should fix your issues. Just remember you'll have to activate that one because it's a totally different meid/esn. I had to swap one on an s3 because of a bad port. Sure it's similar too since it's Samsung.
Sent from my SPH-L900 using XDA-Developers mobile app
travieso1208 said:
Would you know if switching out the board is just plug and play ?
Click to expand...
Click to collapse
Yeah its pretty simple... lol except for the try not to lose all the tiny screws part