Develop Bugs

[Q] Can't ODIN Epic 4g Stuck in Firmware Upgrade encountered an issue?

After trying to ODIN a stock rom I am now stuck on the screen, firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. I can get into the ODIN download mode, but every rom I download fails. I want to through this freaking phone as I've been working on this for hours with many different roms and they ALL fail. Any help please and thank you - Adam

Not sure what your doing or how. Sounds like you got an OTA and tried to install it. Or you're installing something else.
But if you have an Epic 4G Touch (Sprint).
Then here is your solution.
Download sfhub's One-Click here: http://forum.xda-developers.com/showthread.php?t=1721229 [Choose Reset or No data, your choice.
Install the latest Samsung drivers http://org.downloadcenter.samsung.c...342248/Sprint_d710_USB_Driver_v1_3_2360_0.exe
Put your phone into download mode:
Power off completely
Then Hold the Power On + the Volume Down buttons till you get to a 'confirmation' screen and click the Volume Up button to enter 'Download Mode'.
Launch the One Click on your PC.
Then plug you phone into the PC via USB cable. You should see a COMM port light up.
Then click on start and you will be back to stock (and rooted).
If you want a CWM recovery (and kernel, they are together) you can use sfhub's 'Autoroot' package to add that.
The directions there are VERY detailed and simple to follow.
Take your time.
Read through the stickies, how tos and tutorials and through the many posts by the developers. Or you will end up with a pretty paperweight.
Good luck

Still don't know what is wrong with my phone, every time I ODIN=FAIL
I follow the directions to a T, Here is what ODIN spits out at me:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.bin
<ID:0/003>
<ID:0/003>
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks for the help guys, I'm totally scared I bricked my phone but at the same time happy I can still get the computer to recognize it. I just don't know what to do...
leaderbuilder said:
Not sure what your doing or how. Sounds like you got an OTA and tried to install it. Or you're installing something else.
But if you have an Epic 4G Touch (Sprint).
Then here is your solution.
Download sfhub's One-Click here: http://forum.xda-developers.com/showthread.php?t=1721229 [Choose Reset or No data, your choice.
Install the latest Samsung drivers http://org.downloadcenter.samsung.c...342248/Sprint_d710_USB_Driver_v1_3_2360_0.exe
Put your phone into download mode:
Power off completely
Then Hold the Power On + the Volume Down buttons till you get to a 'confirmation' screen and click the Volume Up button to enter 'Download Mode'.
Launch the One Click on your PC.
Then plug you phone into the PC via USB cable. You should see a COMM port light up.
Then click on start and you will be back to stock (and rooted).
If you want a CWM recovery (and kernel, they are together) you can use sfhub's 'Autoroot' package to add that.
The directions there are VERY detailed and simple to follow.
Take your time.
Read through the stickies, how tos and tutorials and through the many posts by the developers. Or you will end up with a pretty paperweight.
Good luck
Click to expand...
Click to collapse

victimless said:
I follow the directions to a T, Here is what ODIN spits out at me:
Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
Checking MD5 finished Sucessfully..
Leave CS..
Odin v.3 engine (ID:3)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
recovery.bin
All threads completed. (succeed 0 / failed 1)
Thanks for the help guys, I'm totally scared I bricked my phone but at the same time happy I can still get the computer to recognize it. I just don't know what to do...
Click to expand...
Click to collapse
Hey Adam, real quick: Just want to confirm you have an e4gt and not the epic 4g as the title says.. I know leaderbuilder stated it, but you didn't confirm.
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2

Epic 4g Touch
Yes, sorry, the title is misleading, Epic 4g Touch.
MoHoGalore said:
Hey Adam, real quick: Just want to confirm you have an e4gt and not the epic 4g as the title says.. I know leaderbuilder stated it, but you didn't confirm.
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2
Click to expand...
Click to collapse

victimless said:
Yes, sorry, the title is misleading, Epic 4g Touch.
Click to expand...
Click to collapse
Can you link to the Odin you attempted or did you try the ff18 LB linked for you?
And please clarify that you used a one click or manual Odin.
:edit: I found this thread that was the exact situation that you're in. Looks like manually using Odin might get you back on track if One clicks keep failing.
http://forum.xda-developers.com/showthread.php?t=1492771
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2

I used the ff18 linked to me one click...
MoHoGalore said:
Can you link to the Odin you attempted or did you try the ff18 LB linked for you?
And please clarify that you used a one click or manual Odin.
:edit: I found this thread that was the exact situation that you're in. Looks like manually using Odin might get you back on track if One clicks keep failing.
http://forum.xda-developers.com/showthread.php?t=1492771
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2
Click to expand...
Click to collapse

victimless said:
I used the ff18 linked to me one click...
Click to expand...
Click to collapse
Take a look at that thread i linked. Try manually using Odin to flash the individual pieces.
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2

YEA!!! Thankyou MoHoGalore, after trying many times I finally had to remove the sd card, make sure everything was setup in odin before plugging my phone in, and the stuff started going through, thanks guys! LOVE XDA, thought I lost my phone and my mind there for a minute....:laugh:
MoHoGalore said:
Take a look at that thread i linked. Try manually using Odin to flash the individual pieces.
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2
Click to expand...
Click to collapse

That's good to know. Thanks for the update on what you did.
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2

tring flashing i9505g stock image on m919

this what i get when trying to do it please if somebody knowhow to do it please let me know
<ID:0/004> Added!!
<ID:0/004> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9505GUEUBMFP_968842_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PLATFORM_I9505GUEUBMFP_968842_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9505GUEUBMFP_968842_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_XAR_I9505GXARBMFP_968842_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)

I9505G has different partition. You can only flash via CWM

macaumen said:
I9505G has different partition. You can only flash via CWM
Click to expand...
Click to collapse
thank you for answering, but since the phone have the same harwere how can i re-partition and install i9505g image with more space and ota updates ?

aniel300 said:
thank you for answering, but since the phone have the same harwere how can i re-partition and install i9505g image with more space and ota updates ?
Click to expand...
Click to collapse
Someone already explained that it's very DANGEROUS to re-partition the device. You have to erase EVERYTHING on the NAND. If anything goes wrong, you will never be able to get it back to work again. I don't know how to do it. You may want to use the search function.

macaumen said:
Someone already explained that it's very DANGEROUS to re-partition the device. You have to erase EVERYTHING on the NAND. If anything goes wrong, you will never be able to get it back to work again. I don't know how to do it. You may want to use the search function.
Click to expand...
Click to collapse
and if for example something goes wrong do Samsung company will know and are they going to repair it ? please i haven't found anything about the procedure can you tell me what they are ?

aniel300 said:
and if for example something goes wrong do Samsung company will know and are they going to repair it ? please i haven't found anything about the procedure can you tell me what they are ?
Click to expand...
Click to collapse
Well, once you start to flash any non-M919 rom onto the M919, you pretty much void the warranty. I don't think Samsung will fix it for free.

Yes but i m not talking about a room, i m talking about flashing i9505g firmware through odin. Please do i have to wioe all the nand first i really need the istuctions
Sent from my GT-I9505G using xda app-developers app

aniel300 said:
Yes but i m not talking about a room, i m talking about flashing i9505g firmware through odin. Please do i have to wioe all the nand first i really need the istuctions
Sent from my GT-I9505G using xda app-developers app
Click to expand...
Click to collapse
You can't Odin the 9505 firmware. Get the firmware for your device and Odin that. Hopefully you haven't messed up your phone too badly yet.

My phone is currently running a gpe rom however i would like to fully convert it into a gpe phone since they have the same hardwere and will get 12 gb and future ota updates
Sent from my GT-I9505G using xda app-developers app

aniel300 said:
My phone is currently running a gpe rom however i would like to fully convert it into a gpe phone since they have the same hardwere and will get 12 gb and future ota updates
Sent from my GT-I9505G using xda app-developers app
Click to expand...
Click to collapse
You can't do that. You should have bought a 9505g if you wanted one.

Doee it has to be with something about write partition protetion enable ?
Sent from my GT-I9505G using xda app-developers app

aniel300 said:
Doee it has to be with something about write partition protetion enable ?
Sent from my GT-I9505G using xda app-developers app
Click to expand...
Click to collapse
I think so, unless someone can figure out how to successfully flash the GPe pit file onto our phone, it will be impossible to convert a regular S4 to a GPe and vice versa.
Sent from my GT-I9505 with 4.3 Touchwiz

iPwnapple said:
I think so, unless someone can figure out how to successfully flash the GPe pit file onto our phone, it will be impossible to convert a regular S4 to a GPe and vice versa.
Sent from my GT-I9505 with 4.3 Touchwiz
Click to expand...
Click to collapse
Thanks very much ipwnapple so i woould no option than wait i dont wanna breack a $600 phone and i red somwere or here that somebody is working on it well i hope some body smart enought find the way because it will be really cool
Sent from my GT-I9505G using xda app-developers app

aniel300 said:
Thanks very much ipwnapple so i woould no option than wait i dont wanna breack a $600 phone and i red somwere or here that somebody is working on it well i hope some body smart enought find the way because it will be really cool
Sent from my GT-I9505G using xda app-developers app
Click to expand...
Click to collapse
Dude search is your friend. There is a guy that actually made it work and the thread is on general of this phone.. Also there is a thread on 9505G that explain how to do it
edit. here is the link http://forum.xda-developers.com/showthread.php?t=2366769

gypsy214 said:
Dude search is your friend. There is a guy that actually made it work and the thread is on general of this phone.. Also there is a thread on 9505G that explain how to do it
edit. here is the link http://forum.xda-developers.com/showthread.php?t=2366769
Click to expand...
Click to collapse
Hey gypsy214 thanks a lot but have u tried it, do u will get ota updates ? And full space
Sent from my GT-I9505G using Tapatalk 4

aniel300 said:
Hey gypsy214 thanks a lot but have u tried it, do u will get ota updates ? And full space
Sent from my GT-I9505G using Tapatalk 4
Click to expand...
Click to collapse
Did you read the thread? They guy wasn't very successful.

jd1639 said:
Did you read the thread? They guy wasn't very successful.
Click to expand...
Click to collapse
He said something about that bootloader gave him some error but everything was working
Sent from my GT-I9505G using Tapatalk 4

[Q] i need help.

when ever i try to use odin to reset my phone or root it it would always fail. it would always say
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006>
<OSM> All threads completed. (succeed 0 / failed 1)
this is really annoying. can anyone help me fix this?

tylersekuris said:
when ever i try to use odin to reset my phone or root it it would always fail. it would always say
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006>
<OSM> All threads completed. (succeed 0 / failed 1)
this is really annoying. can anyone help me fix this?
Click to expand...
Click to collapse
Few things. Need more information. What file are you flashing? What build are you trying to get onto your phone? Why not try a one-click? What phone are you using?
This may belong in the noob friendly thread, but for now, tell us the above.
Thanks!
Sent from my SPH-D710 using inverted blue xda premium

tylersekuris said:
when ever i try to use odin to reset my phone or root it it would always fail. it would always say
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006>
<OSM> All threads completed. (succeed 0 / failed 1)
this is really annoying. can anyone help me fix this?
Click to expand...
Click to collapse
I just seen this... as micmars says.... some more info..
I'll try to help as well...
FYI.... if just trying to root... Framaroot is the easiest way on this device( epic 4g touch )..
After rooting you could use mobile Odin to get a custom recovery or flash a custom rom. ( the custom roms you can flash will depend on what Android build you're on now, because of the system partitions )..you can use one-clicks and Odin to get you're partitions right for the build you want... mainly.. this is in reference to JB roms, but if already on JB you're good to go, as I'm assuming you would want a JB rom not an ICS one.

micmars said:
Few things. Need more information. What file are you flashing? What build are you trying to get onto your phone? Why not try a one-click? What phone are you using?
ive tried to use SPH-D710_FL24_CL1173404_REV2_Stock_Nodata and some of other odin programs. my build number is IMM76I.FL24. i am trying to root my phone. i tried SPH-D710_FI03_CL1083465_Rooted_Nodata_v2 but it came up with the same error. My phone is a galaxy s2 epic 4g touch. model SPH-D710. android version is 4.0.4. it wont let me update my phone either to 4.2.2. do you need any other information?
Click to expand...
Click to collapse

tylersekuris said:
micmars said:
Few things. Need more information. What file are you flashing? What build are you trying to get onto your phone? Why not try a one-click? What phone are you using?
ive tried to use SPH-D710_FL24_CL1173404_REV2_Stock_Nodata and some of other odin programs. my build number is IMM76I.FL24. i am trying to root my phone. i tried SPH-D710_FI03_CL1083465_Rooted_Nodata_v2 but it came up with the same error. My phone is a galaxy s2 epic 4g touch. model SPH-D710. android version is 4.0.4. it wont let me update my phone either to 4.2.2. do you need any other information?
Click to expand...
Click to collapse
No worries... we'll have ya rooted before you know it..
Download Framaroot.... it's an app used to root specific devices... it works great with this phone( e4gt )..
Once downloaded.. ( you can find it on xda )....install it with a file browser/manager...
Then open it and follow the prompts... after you're rooted.. if you want a custom recovery or a custom rom. We'll tackle that.. :good:
Click to expand...
Click to collapse

Gil81 Is the Man...
Gil81 said:
tylersekuris said:
No worries... we'll have ya rooted before you know it..
Download Framaroot.... it's an app used to root specific devices... it works great with this phone( e4gt )..
Once downloaded.. ( you can find it on xda )....install it with a file browser/manager...
Then open it and follow the prompts... after you're rooted.. if you want a custom recovery or a custom rom. We'll tackle that.. :good:
Click to expand...
Click to collapse
Gil81 is the man with the sound advice. Sorry, bro, didn't see the update to my quote. If you want JB4.2.2, you'll want an ICS rooted restore build, and from your post, it appears that you may have a stock one-click for your first of the two. Your second looks like an unofficial build or bad download.
Here's another path (all links to repo One-Clicks, save the USB drivers, which is straight from Samsung)
Jellybean
Go here for GB27 Rooted Restore One Click and Tar files
Video Here.
ICS Build:
Go here for FL24 Rooted Restore
Video here.
Windows USB Drivers here.
I hope this helps. Gil81 may want to nudge me if I have anything incomplete or contrary towards the desired ends.
Click to expand...
Click to collapse

@micmars
Now that is a reply.... I so miss my PC...
Trying to reply to threads and post links off my tab.. sucks.. lol.
Anyway... I think you covered all that needed covered... thanks..
You are really one of the most helpful members I've seen on here... jdsingle76, Stryke, Ryan being some of the others that I see always helping too... I know.. I left out about a dozen other names.. lol. You guys rock... I'm just glad to be able to help when I can. ( I'm such a noob ) lmao...

Dude, You're First Class...
Gil81 said:
@micmars
Now that is a reply.... I so miss my PC...
Trying to reply to threads and post links off my tab.. sucks.. lol.
Anyway... I think you covered all that needed covered... thanks..
You are really one of the most helpful members I've seen on here... jdsingle76, Stryke, Ryan being some of the others that I see always helping too... I know.. I left out about a dozen other names.. lol. You guys rock... I'm just glad to be able to help when I can. ( I'm such a noob ) lmao...
Click to expand...
Click to collapse
Gil81, I've seen your handiwork. I believe you provided that thriller novella a few weeks back that blew my mind.
Your tenacity and perspicacity--lacking all mendacity--are top-drawer, bro.

LMAO
micmars said:
Gil81, I've seen your handiwork. I believe you provided that thriller novella a few weeks back that blew my mind.
Your tenacity and perspicacity--lacking all mendacity--are top-drawer, bro.
Click to expand...
Click to collapse
Lmao... man that is great... I wish I had you're way with words...
You should run for office... my vote is yours... and thanks for the kind words...

[Q] Think i bricked my Galaxy Note 2?

For one reason or another, i had a lot of crap on my internal storage of my Galaxy Note 2. I booted into the volume up + power + menu mode and formatted my sd card thinking that it would wipe the data and start me off fresh. However for some reason i also decided to format everything else, and now my phone is stuck on the samsung logo when i boot up, Any help guys? :/

Can you get into download mode volume down button+power button+home button?
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

yes i can, download mode right?

Cyferous said:
yes i can, download mode right?
Click to expand...
Click to collapse
Then there's hope you have a soft brick... Do you have the note 2 tool kit?... Flash the stock rom using Odin
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

Do i flash with odin or the toolkit?

My friend u only need to restore to factory from within download mode.

I've tried restoring to factory, clearing cache and even flashing a stock rom with Odin. the problem is with odin I now keep getting a error message and the flash fails. I've tried using older and newer versions of odin, switching the cable and usb ports. The error message that i keep getting is:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Enter CS for MD5..
<ID:0/004> Check MD5.. Do not unplug the cable..
<ID:0/004> Please wait..
<ID:0/004> Checking MD5 finished Sucessfully..
<ID:0/004> Leave CS..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
kinda getting desperate for help here, google turned up little to no answers :/

Cyferous said:
For one reason or another, i had a lot of crap on my internal storage of my Galaxy Note 2. I booted into the volume up + power + menu mode and formatted my sd card thinking that it would wipe the data and start me off fresh. However for some reason i also decided to format everything else, and now my phone is stuck on the samsung logo when i boot up, Any help guys? :/
Click to expand...
Click to collapse
Go here download your firmware. Use Odin to flash. http://forum.xda-developers.com/showthread.php?t=1987541
The one with M behind it is Canada
Sent from my SGH-I317 using Tapatalk

Cyferous said:
Do i flash with odin or the toolkit?
Click to expand...
Click to collapse
You can either flash it using toolkit which will automatically open up Odin or just go straight to odin
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

BR7fan said:
Go here download your firmware. Use Odin to flash. http://forum.xda-developers.com/showthread.php?t=1987541
The one with M behind it is Canada
Sent from my SGH-I317 using Tapatalk
Click to expand...
Click to collapse
This HERE^^^^^^^^^^^^^^^:thumbup:
All you need is the original firmware, flash that thru Odin and you'll be back up and running...
Go to section#5 for your firmware.
[Q]
Which GN2 do you have??
Att/TMO or Rogers??
Sent from my SAMSUNG-SGH-I317 using Tapatalk

Alright guys, thanks i fixed it. Apperently i was using the wrong stock rom verson of the N7100 instead of my SGH-T889V. The odin flash worked and now m y phones back up and running. Thanks again for all your help!

Help Soft Bricked Cant Go back to stock

Hello,
So I installed the Rainbow 7 rom and it worked great for 2 days. Next thing I know Im stuck at the Samsung note 2 screen. Im like OK lets open TWRP and restore from Backup. Some how I manage to erase the OS and now I can't even return to Stock. When I try to flash tar I get failed. Phone does go into download mode fine and recovery. TWRP shows my sd and internal as (0) MB but when I use my ext sd card on pc all files are there so cant flash via recovery. Kies does not work either I tried the latest version of TWRP via Latest version of ODIN nothing file is good then I get The Below with OH3
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
With NE2 STOCK in Odin I GET note 2 re-partition operation failed.............
I have always been able to restore my backups or flash back to stock but this time in Stuck. Any Thoughts?
TWRP states no OS found even if I wiped all of the system and data files Should I not be able to go back to stock ? I've tried NE2 and OH3
I have searched and searched and tried but nothing seems to work. If it boots to download mode and recovery it's not a hard bricked it ??
FYI I have tried 2 pc's using different ports and different cables also

When you boot into recovery does it show failure to mount any partitions (system, data, cache)?
Sent from my LG-D851 using XDA-Developers mobile app

cidxtc said:
When you boot into recovery does it show failure to mount any partitions (system, data, cache)?
Sent from my LG-D851 using XDA-Developers mobile app
Click to expand...
Click to collapse
Hello
Yes All of them that your saying. I tried usb on the go and it appears it will install but then same thing error signal 9 and failure to mount any partitions.
Thank you For looking

any suggestions ?
Thank You

travieso1208 said:
any suggestions ?
Thank You
Click to expand...
Click to collapse
I seen a few other users with same issue. Only way that I have seen it fixed is by replacing the main board. Sorry to give bad news.
Sent from my LG-D851 using XDA-Developers mobile app

Ahhh okay thank you

Would you know if switching out the board is just plug and play ?

You could always try to Odin back to stock. Since you can get into recovery i imagine you can get into download mode.Its worth a shot before you order a board and open the phone. Link for the process I was suggest the PC version
http://forum.xda-developers.com/showthread.php?t=2780984
Edit: fixed link to reflect the correct bootloader.
Sent from my SPH-L900 using XDA-Developers mobile app

beansnorice said:
You could always try to Odin back to stock. Since you can get into recovery i imagine you can get into download mode.Its worth a shot before you order a board and open the phone. Link for the process I was suggest the PC version
http://forum.xda-developers.com/showthread.php?t=2780984
Edit: fixed link to reflect the correct bootloader.
Sent from my SPH-L900 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks I'll Give it a shot but it has failed in the past

I dont know if this matters but according to the rainbow 7 install instructions I was supposed to have bootloader of 4.3 or newer.. if i didnt could. This be the cause of everything. I can't believe there isn't a way to fix this without changing the board.

It could very well be why it fails the link above was to the 4.4.2 bootloader if it doest help or fail I have no idea about swapping out the board. I've replaced antanneas and ifixit has a complete teardown of the phone https://www.ifixit.com/Device/Samsung_Galaxy_Note_II hope you figure it out. Sorry I wasn't much more help
Sent from my SPH-L900 using XDA-Developers mobile app

beansnorice said:
It could very well be why it fails the link above was to the 4.4.2 bootloader if it doest help or fail I have no idea about swapping out the board. I've replaced antanneas and ifixit has a complete teardown of the phone https://www.ifixit.com/Device/Samsung_Galaxy_Note_II hope you figure it out. Sorry I wasn't much more help
Sent from my SPH-L900 using XDA-Developers mobile app
Click to expand...
Click to collapse
Okay Thank You I'll Def Try this

travieso1208 said:
Okay Thank You I'll Def Try this
Click to expand...
Click to collapse
Hope it helps
Sent from my SPH-L900 using XDA-Developers mobile app

So I got a clean logic board. Just have to install it and The phone should work fine ?
Thank You

Yes a new logic board should fix your issues. Just remember you'll have to activate that one because it's a totally different meid/esn. I had to swap one on an s3 because of a bad port. Sure it's similar too since it's Samsung.
Sent from my SPH-L900 using XDA-Developers mobile app

travieso1208 said:
Would you know if switching out the board is just plug and play ?
Click to expand...
Click to collapse
Yeah its pretty simple... lol except for the try not to lose all the tiny screws part