this what i get when trying to do it please if somebody knowhow to do it please let me know
<ID:0/004> Added!!
<ID:0/004> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9505GUEUBMFP_968842_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PLATFORM_I9505GUEUBMFP_968842_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9505GUEUBMFP_968842_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_XAR_I9505GXARBMFP_968842_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I9505G has different partition. You can only flash via CWM
macaumen said:
I9505G has different partition. You can only flash via CWM
Click to expand...
Click to collapse
thank you for answering, but since the phone have the same harwere how can i re-partition and install i9505g image with more space and ota updates ?
aniel300 said:
thank you for answering, but since the phone have the same harwere how can i re-partition and install i9505g image with more space and ota updates ?
Click to expand...
Click to collapse
Someone already explained that it's very DANGEROUS to re-partition the device. You have to erase EVERYTHING on the NAND. If anything goes wrong, you will never be able to get it back to work again. I don't know how to do it. You may want to use the search function.
macaumen said:
Someone already explained that it's very DANGEROUS to re-partition the device. You have to erase EVERYTHING on the NAND. If anything goes wrong, you will never be able to get it back to work again. I don't know how to do it. You may want to use the search function.
Click to expand...
Click to collapse
and if for example something goes wrong do Samsung company will know and are they going to repair it ? please i haven't found anything about the procedure can you tell me what they are ?
aniel300 said:
and if for example something goes wrong do Samsung company will know and are they going to repair it ? please i haven't found anything about the procedure can you tell me what they are ?
Click to expand...
Click to collapse
Well, once you start to flash any non-M919 rom onto the M919, you pretty much void the warranty. I don't think Samsung will fix it for free.
Yes but i m not talking about a room, i m talking about flashing i9505g firmware through odin. Please do i have to wioe all the nand first i really need the istuctions
Sent from my GT-I9505G using xda app-developers app
aniel300 said:
Yes but i m not talking about a room, i m talking about flashing i9505g firmware through odin. Please do i have to wioe all the nand first i really need the istuctions
Sent from my GT-I9505G using xda app-developers app
Click to expand...
Click to collapse
You can't Odin the 9505 firmware. Get the firmware for your device and Odin that. Hopefully you haven't messed up your phone too badly yet.
My phone is currently running a gpe rom however i would like to fully convert it into a gpe phone since they have the same hardwere and will get 12 gb and future ota updates
Sent from my GT-I9505G using xda app-developers app
aniel300 said:
My phone is currently running a gpe rom however i would like to fully convert it into a gpe phone since they have the same hardwere and will get 12 gb and future ota updates
Sent from my GT-I9505G using xda app-developers app
Click to expand...
Click to collapse
You can't do that. You should have bought a 9505g if you wanted one.
Doee it has to be with something about write partition protetion enable ?
Sent from my GT-I9505G using xda app-developers app
aniel300 said:
Doee it has to be with something about write partition protetion enable ?
Sent from my GT-I9505G using xda app-developers app
Click to expand...
Click to collapse
I think so, unless someone can figure out how to successfully flash the GPe pit file onto our phone, it will be impossible to convert a regular S4 to a GPe and vice versa.
Sent from my GT-I9505 with 4.3 Touchwiz
iPwnapple said:
I think so, unless someone can figure out how to successfully flash the GPe pit file onto our phone, it will be impossible to convert a regular S4 to a GPe and vice versa.
Sent from my GT-I9505 with 4.3 Touchwiz
Click to expand...
Click to collapse
Thanks very much ipwnapple so i woould no option than wait i dont wanna breack a $600 phone and i red somwere or here that somebody is working on it well i hope some body smart enought find the way because it will be really cool
Sent from my GT-I9505G using xda app-developers app
aniel300 said:
Thanks very much ipwnapple so i woould no option than wait i dont wanna breack a $600 phone and i red somwere or here that somebody is working on it well i hope some body smart enought find the way because it will be really cool
Sent from my GT-I9505G using xda app-developers app
Click to expand...
Click to collapse
Dude search is your friend. There is a guy that actually made it work and the thread is on general of this phone.. Also there is a thread on 9505G that explain how to do it
edit. here is the link http://forum.xda-developers.com/showthread.php?t=2366769
gypsy214 said:
Dude search is your friend. There is a guy that actually made it work and the thread is on general of this phone.. Also there is a thread on 9505G that explain how to do it
edit. here is the link http://forum.xda-developers.com/showthread.php?t=2366769
Click to expand...
Click to collapse
Hey gypsy214 thanks a lot but have u tried it, do u will get ota updates ? And full space
Sent from my GT-I9505G using Tapatalk 4
aniel300 said:
Hey gypsy214 thanks a lot but have u tried it, do u will get ota updates ? And full space
Sent from my GT-I9505G using Tapatalk 4
Click to expand...
Click to collapse
Did you read the thread? They guy wasn't very successful.
jd1639 said:
Did you read the thread? They guy wasn't very successful.
Click to expand...
Click to collapse
He said something about that bootloader gave him some error but everything was working
Sent from my GT-I9505G using Tapatalk 4
Related
I'm on CyanogenMod 9 alpha3 at the moment.
Got the rom from here
http://forum.xda-developers.com/wiki/Samsung_Epic_4G_Touch/ROMs
If your doing the one-click just go to download mode and run it.
Just ran it and it said this
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
It didnt see your phone. did you get a yellow box on the odin screen showing you connected?
Make sure you have the correct drivers installed on your computer. Did you download Samsung Kies?
Sent from my E4GT running AOKP from times_infinity.
rwright64 said:
It didnt see your phone. did you get a yellow box on the odin screen showing you connected?
Click to expand...
Click to collapse
Ok I got it. I used to know all this stuff but when you get a good rom you stick with it so long you forget. lol
Does the data.img take a while to install?
It's been sitting there for a while.
DevilStrider said:
It's been sitting there for a while.
Click to expand...
Click to collapse
How long?
Sent from my SPH-D710 using Tapatalk 2
Something sounds wrong. Try this one. Follow it exactly!
http://www.youtube.com/watch?v=_vmEmheJnyg
KBizzle said:
How long?
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
**** about 10 minutes. I don't think I have kies so stopped it and put it in download mode again and installing kies now.
DevilStrider said:
**** about 10 minutes. I don't think I have kies so stopped it and put it in download mode again and installing kies now.
Click to expand...
Click to collapse
I have heard of folks getting stuck there. Just try again.
Sent from my SPH-D710 using Tapatalk 2
Ok now that i'm back stock I'm going to do a prl update and stuff and go back to CyanogenMod 9 alpha5. Can I install modems with odin while on that rom or any other ICS rom?
Hi all,
I have been using cyanogenmod 10 beta 2 for a long while, this morning after making a call, set the phone down for a bit. later when i picked it up, the screen wasn't coming on, so thinking it was some frozen application, reset the phone by pulling the battery out.
when it started booting up, it wouldn't go past the samsung splash screen. I was able to access cwm recovery (volume up + power button) at this moment though. someone on here advised that i should try a nightly but seeing as how i couldn't get access to put anything on the SD card, i flashed what i had at that moment, cm 10 beta 2 (didn't erase cache or dalvik). flashing this still resulted the phone not being able to get past the samsung splash screen but now i can't get into cwm recovery either. I am able to access odin mode though.
How would I go about solving this dilemma without losing user data if possible?
Flash el26 kernel in odin. Backup the rom in cwm. Either flash a new rom. Or odin a one click. Then use titanium backup pro to extract the apps from the backup. Only way I know how to do it. Others may chime in. As I'm sure that's not the only way
sent from MY BAD A$$ ET4G
patrao_n said:
Flash el26 kernel in odin. Backup the rom in cwm. Either flash a new rom. Or odin a one click. Then use titanium backup pro to extract the apps from the backup. Only way I know how to do it. Others may chime in. As I'm sure that's not the only way
sent from MY BAD A$$ ET4G
Click to expand...
Click to collapse
is this the EL26 kernel file "SPH-D710_FI27_CL1127689_Rooted_Nodata"? the file is from the qbking page on rooting FI27.
trying to flash EL26 stock cwm5 in odin but haven't seen progress beyond zimage for the past 15mins and there's no progress bar.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
ppcpirate said:
trying to flash EL26 stock cwm5 in odin but haven't seen progress beyond zimage for the past 15mins and there's no progress bar.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
Click to expand...
Click to collapse
Just to ask - Did you place your phone in Odin(download) mode prior to starting? (from powered off, hold power+vol down)
MoHoGalore said:
Just to ask - Did you place your phone in Odin(download) mode prior to starting? (from powered off, hold power+vol down)
Click to expand...
Click to collapse
yeah i did, then volume up to go into download mode. there's was no progress bar on the phone after clicking start on the pc so i shut it off. I can still get into odin mode.
was planning on trying this "SPH-D710_FI27_CL1127689_Rooted_Restore_v2" next to see if that would work. really not sure what to do.
Are you sure that the proper drivers were installed? You should reinstall them either ways just to be sure. Then retry Odining your file
Sent from my SPH-D710 using xda premium
Tr0LL-$_$ said:
Are you sure that the proper drivers were installed? You should reinstall them either ways just to be sure. Then retry Odining your file
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
which proper drivers would those be? samsung usb drivers for pc?
ppcpirate said:
yeah i did, then volume up to go into download mode. there's was no progress bar on the phone after clicking start on the pc so i shut it off. I can still get into odin mode.
was planning on trying this "SPH-D710_FI27_CL1127689_Rooted_Restore_v2" next to see if that would work. really not sure what to do.
Click to expand...
Click to collapse
As long as you're aware that a restore will wipe user data, but that'd be my suggestion.
MoHoGalore said:
As long as you're aware that a restore will wipe user data, but that'd be my suggestion.
Click to expand...
Click to collapse
tried that didn't get past hidden.img in odin mode.
so i tried to unbrick/unroot via this file SPH-D710_FI27_CL1127689_Stock_Nodata
also didn't progress that far but now it looks like i've hard bricked my phone. only getting a blue light now. might be new phone time.
ppcpirate said:
tried that didn't get past hidden.img in odin mode.
so i tried to unbrick/unroot via this file SPH-D710_FI27_CL1127689_Stock_Nodata
also didn't progress that far but now it looks like i've hard bricked my phone. only getting a blue light now. might be new phone time.
Click to expand...
Click to collapse
Ouch!
Sent from my SPH-D710 using Xparent ICS Tapatalk 2
MoHoGalore said:
Ouch!
Sent from my SPH-D710 using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
so now it's either a used Evo LTE for $234 or used galaxy s3 for $300.
ppcpirate said:
tried that didn't get past hidden.img in odin mode.
so i tried to unbrick/unroot via this file SPH-D710_FI27_CL1127689_Stock_Nodata
also didn't progress that far but now it looks like i've hard bricked my phone. only getting a blue light now. might be new phone time.
Click to expand...
Click to collapse
Blue light that blinks on and off or blue light that stays on?
On/Off might be saveable, just probably need to charge the battery on another device or external charger.
garwynn said:
Blue light that blinks on and off or blue light that stays on?
On/Off might be saveable, just probably need to charge the battery on another device or external charger.
Click to expand...
Click to collapse
nope, it's a constant blue light. will most likely sell for parts now as the display is in pristine condition (had screen protector from the beginning). whats the going rate for sell for parts?
hey guys!! Need Help!!
This is the error Im getting while trying to root!!
N7100xxmd3
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Bunny2rock said:
hey guys!! Need Help!!
This is the error Im getting while trying to root!!
N7100xxmd3
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
its done install rootchecker in verify.
aukhan said:
its done install rootchecker in verify.
Click to expand...
Click to collapse
Thanks For the reply mate!!! But I'm sure Its not rooted!! There is no SuperSu app installed!! I dont know whats wrong with it??
Bunny2rock said:
Thanks For the reply mate!!! But I'm sure Its not rooted!! There is no SuperSu app installed!! I dont know whats wrong with it??
Click to expand...
Click to collapse
Which Method are you following what link could you share please
would you want try flashing the Pre rooted stock ROM http://forum.xda-developers.com/showthread.php?t=2230250
aukhan said:
Which Method are you following what link could you share please
would you want try flashing the Pre rooted stock ROM http://forum.xda-developers.com/showthread.php?t=2230250
Click to expand...
Click to collapse
Im following Dr.Keton's Post Here is the URL http://forum.xda-developers.com/showpost.php?p=31801060&postcount=2
And Its hardly been a week since i bought the Note 2 So Im kinda not looking forward flashing any Rom's even If its a Pre rooted stock ROM!!
Hope You understand!! I want to enjoy this new Phone feeling
Bunny2rock said:
Im following Dr.Keton's Post Here is the URL http://forum.xda-developers.com/showpost.php?p=31801060&postcount=2
And Its hardly been a week since i bought the Note 2 So Im kinda not looking forward flashing any Rom's even If its a Pre rooted stock ROM!!
Hope You understand!! I want to enjoy this new Phone feeling
Click to expand...
Click to collapse
A.How to root N7100
Advantages and disadvantages of each method of root.
Method 1:Root with stock Recovery
Method 2: Root with CWM recovery
Method 3 : Root with simple APK
Which method here from above ?
aukhan said:
A.How to root N7100
Advantages and disadvantages of each method of root.
Method 1:Root with stock Recovery
Method 2: Root with CWM recovery
Method 3 : Root with simple APK
Which method here from above ?
Click to expand...
Click to collapse
Pardon me for not being clear!!
Method 1:
Its Root With Stock Recovery!!
Bunny2rock said:
Pardon me for not being clear!!
Method 1:
Its Root With Stock Recovery!!
Click to expand...
Click to collapse
ok so you've tried this method 1 ok well would request you try once again try with a different version of Odin.
aukhan said:
ok so you've tried this method 1 ok well would request you try once again try with a different version of Odin.
Click to expand...
Click to collapse
Tried 3.07 ,3.04 ,even 1.85 Bro!! No luck!!!
Try different port (if on PC better on backside)
Don't use any extension cable/usb hub
Disable firewall and antivirus
Uninstall kies and just install samsung usb driver (you get from my thread you are following)
Btw flashing my prerooted rom is exactly same with rooting with option one but even without raising counter.
But if you having problem that also fail flashing prerooted rom.
Sent from my GT-N7100 using xda premium
dr.ketan said:
Try different port (if on PC better on backside)
Don't use any extension cable/usb hub
Disable firewall and antivirus
Uninstall kies and just install samsung usb driver (you get from my thread you are following)
Btw flashing my prerooted rom is exactly same with rooting with option one but even without raising counter.
But if you having problem that also fail flashing prerooted rom.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Thanks a lot bro!! Will follow your steps and get back
There a long pause at Get Pit Mapping!! Still the same result!! Rooting is not successful!! Why is it happening to me??? Faulty note 2???
While in the download mode, nothing is happening, it displays,
ODIN MODE
PRODUCT NAME: GT-N7100
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY:SAMSUNG OFFICIAL
SYSTEM STATUS : OFFICIAL
Are you sure device in download mode?
Vol down +home +power
Then you have to press Vol up in Warning screen to enter right into download mode
Sent from my GT-N7100 using xda premium
dr.ketan said:
Are you sure device in download mode?
Vol down +home +power
Then you have to press Vol up in Warning screen to enter right into download mode
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
YES BRO! I'm very sure!!!
Try on different cable and pc
Otherwise try flashing pit (must be as last resort)
Sent from my GT-N7100 using xda premium
dr.ketan said:
Try on different cable and pc
Otherwise try flashing pit (must be as last resort)
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
No luck mate!!! I'm Screwed!!
What happened?
Sent from my GT-N7100 using xda premium
dr.ketan said:
What happened?
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Tried Different cables and PC but still the same error
There is no other trick except said you. Rarely rae I have seen few cases (on note1)where device getting odin locked and nothing works
Still try calmly and follow to the letter to check nothing is missing. Note2 also reportedly not works on old usb 1 port, make sure pc you are trying having usb 2.0 port. I recommend xp machine.
Sent from my GT-N7100 using xda premium
dr.ketan said:
There is no other trick except said you. Rarely rae I have seen few cases (on note1)where device getting odin locked and nothing works
Still try calmly and follow to the letter to check nothing is missing. Note2 also reportedly not works on old usb 1 port, make sure pc you are trying having usb 2.0 port. I recommend xp machine.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Thanks for the help buddy!! Will try and get back to you guys!!
when ever i try to use odin to reset my phone or root it it would always fail. it would always say
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006>
<OSM> All threads completed. (succeed 0 / failed 1)
this is really annoying. can anyone help me fix this?
tylersekuris said:
when ever i try to use odin to reset my phone or root it it would always fail. it would always say
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006>
<OSM> All threads completed. (succeed 0 / failed 1)
this is really annoying. can anyone help me fix this?
Click to expand...
Click to collapse
Few things. Need more information. What file are you flashing? What build are you trying to get onto your phone? Why not try a one-click? What phone are you using?
This may belong in the noob friendly thread, but for now, tell us the above.
Thanks!
Sent from my SPH-D710 using inverted blue xda premium
tylersekuris said:
when ever i try to use odin to reset my phone or root it it would always fail. it would always say
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006>
<OSM> All threads completed. (succeed 0 / failed 1)
this is really annoying. can anyone help me fix this?
Click to expand...
Click to collapse
I just seen this... as micmars says.... some more info..
I'll try to help as well...
FYI.... if just trying to root... Framaroot is the easiest way on this device( epic 4g touch )..
After rooting you could use mobile Odin to get a custom recovery or flash a custom rom. ( the custom roms you can flash will depend on what Android build you're on now, because of the system partitions )..you can use one-clicks and Odin to get you're partitions right for the build you want... mainly.. this is in reference to JB roms, but if already on JB you're good to go, as I'm assuming you would want a JB rom not an ICS one.
micmars said:
Few things. Need more information. What file are you flashing? What build are you trying to get onto your phone? Why not try a one-click? What phone are you using?
ive tried to use SPH-D710_FL24_CL1173404_REV2_Stock_Nodata and some of other odin programs. my build number is IMM76I.FL24. i am trying to root my phone. i tried SPH-D710_FI03_CL1083465_Rooted_Nodata_v2 but it came up with the same error. My phone is a galaxy s2 epic 4g touch. model SPH-D710. android version is 4.0.4. it wont let me update my phone either to 4.2.2. do you need any other information?
Click to expand...
Click to collapse
tylersekuris said:
micmars said:
Few things. Need more information. What file are you flashing? What build are you trying to get onto your phone? Why not try a one-click? What phone are you using?
ive tried to use SPH-D710_FL24_CL1173404_REV2_Stock_Nodata and some of other odin programs. my build number is IMM76I.FL24. i am trying to root my phone. i tried SPH-D710_FI03_CL1083465_Rooted_Nodata_v2 but it came up with the same error. My phone is a galaxy s2 epic 4g touch. model SPH-D710. android version is 4.0.4. it wont let me update my phone either to 4.2.2. do you need any other information?
Click to expand...
Click to collapse
No worries... we'll have ya rooted before you know it..
Download Framaroot.... it's an app used to root specific devices... it works great with this phone( e4gt )..
Once downloaded.. ( you can find it on xda )....install it with a file browser/manager...
Then open it and follow the prompts... after you're rooted.. if you want a custom recovery or a custom rom. We'll tackle that.. :good:
Click to expand...
Click to collapse
Gil81 Is the Man...
Gil81 said:
tylersekuris said:
No worries... we'll have ya rooted before you know it..
Download Framaroot.... it's an app used to root specific devices... it works great with this phone( e4gt )..
Once downloaded.. ( you can find it on xda )....install it with a file browser/manager...
Then open it and follow the prompts... after you're rooted.. if you want a custom recovery or a custom rom. We'll tackle that.. :good:
Click to expand...
Click to collapse
Gil81 is the man with the sound advice. Sorry, bro, didn't see the update to my quote. If you want JB4.2.2, you'll want an ICS rooted restore build, and from your post, it appears that you may have a stock one-click for your first of the two. Your second looks like an unofficial build or bad download.
Here's another path (all links to repo One-Clicks, save the USB drivers, which is straight from Samsung)
Jellybean
Go here for GB27 Rooted Restore One Click and Tar files
Video Here.
ICS Build:
Go here for FL24 Rooted Restore
Video here.
Windows USB Drivers here.
I hope this helps. Gil81 may want to nudge me if I have anything incomplete or contrary towards the desired ends.
Click to expand...
Click to collapse
@micmars
Now that is a reply.... I so miss my PC...
Trying to reply to threads and post links off my tab.. sucks.. lol.
Anyway... I think you covered all that needed covered... thanks..
You are really one of the most helpful members I've seen on here... jdsingle76, Stryke, Ryan being some of the others that I see always helping too... I know.. I left out about a dozen other names.. lol. You guys rock... I'm just glad to be able to help when I can. ( I'm such a noob ) lmao...
Dude, You're First Class...
Gil81 said:
@micmars
Now that is a reply.... I so miss my PC...
Trying to reply to threads and post links off my tab.. sucks.. lol.
Anyway... I think you covered all that needed covered... thanks..
You are really one of the most helpful members I've seen on here... jdsingle76, Stryke, Ryan being some of the others that I see always helping too... I know.. I left out about a dozen other names.. lol. You guys rock... I'm just glad to be able to help when I can. ( I'm such a noob ) lmao...
Click to expand...
Click to collapse
Gil81, I've seen your handiwork. I believe you provided that thriller novella a few weeks back that blew my mind.
Your tenacity and perspicacity--lacking all mendacity--are top-drawer, bro.
LMAO
micmars said:
Gil81, I've seen your handiwork. I believe you provided that thriller novella a few weeks back that blew my mind.
Your tenacity and perspicacity--lacking all mendacity--are top-drawer, bro.
Click to expand...
Click to collapse
Lmao... man that is great... I wish I had you're way with words...
You should run for office... my vote is yours... and thanks for the kind words...
Hello,
So I installed the Rainbow 7 rom and it worked great for 2 days. Next thing I know Im stuck at the Samsung note 2 screen. Im like OK lets open TWRP and restore from Backup. Some how I manage to erase the OS and now I can't even return to Stock. When I try to flash tar I get failed. Phone does go into download mode fine and recovery. TWRP shows my sd and internal as (0) MB but when I use my ext sd card on pc all files are there so cant flash via recovery. Kies does not work either I tried the latest version of TWRP via Latest version of ODIN nothing file is good then I get The Below with OH3
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
With NE2 STOCK in Odin I GET note 2 re-partition operation failed.............
I have always been able to restore my backups or flash back to stock but this time in Stuck. Any Thoughts?
TWRP states no OS found even if I wiped all of the system and data files Should I not be able to go back to stock ? I've tried NE2 and OH3
I have searched and searched and tried but nothing seems to work. If it boots to download mode and recovery it's not a hard bricked it ??
FYI I have tried 2 pc's using different ports and different cables also
When you boot into recovery does it show failure to mount any partitions (system, data, cache)?
Sent from my LG-D851 using XDA-Developers mobile app
cidxtc said:
When you boot into recovery does it show failure to mount any partitions (system, data, cache)?
Sent from my LG-D851 using XDA-Developers mobile app
Click to expand...
Click to collapse
Hello
Yes All of them that your saying. I tried usb on the go and it appears it will install but then same thing error signal 9 and failure to mount any partitions.
Thank you For looking
any suggestions ?
Thank You
travieso1208 said:
any suggestions ?
Thank You
Click to expand...
Click to collapse
I seen a few other users with same issue. Only way that I have seen it fixed is by replacing the main board. Sorry to give bad news.
Sent from my LG-D851 using XDA-Developers mobile app
Ahhh okay thank you
Would you know if switching out the board is just plug and play ?
You could always try to Odin back to stock. Since you can get into recovery i imagine you can get into download mode.Its worth a shot before you order a board and open the phone. Link for the process I was suggest the PC version
http://forum.xda-developers.com/showthread.php?t=2780984
Edit: fixed link to reflect the correct bootloader.
Sent from my SPH-L900 using XDA-Developers mobile app
beansnorice said:
You could always try to Odin back to stock. Since you can get into recovery i imagine you can get into download mode.Its worth a shot before you order a board and open the phone. Link for the process I was suggest the PC version
http://forum.xda-developers.com/showthread.php?t=2780984
Edit: fixed link to reflect the correct bootloader.
Sent from my SPH-L900 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks I'll Give it a shot but it has failed in the past
I dont know if this matters but according to the rainbow 7 install instructions I was supposed to have bootloader of 4.3 or newer.. if i didnt could. This be the cause of everything. I can't believe there isn't a way to fix this without changing the board.
It could very well be why it fails the link above was to the 4.4.2 bootloader if it doest help or fail I have no idea about swapping out the board. I've replaced antanneas and ifixit has a complete teardown of the phone https://www.ifixit.com/Device/Samsung_Galaxy_Note_II hope you figure it out. Sorry I wasn't much more help
Sent from my SPH-L900 using XDA-Developers mobile app
beansnorice said:
It could very well be why it fails the link above was to the 4.4.2 bootloader if it doest help or fail I have no idea about swapping out the board. I've replaced antanneas and ifixit has a complete teardown of the phone https://www.ifixit.com/Device/Samsung_Galaxy_Note_II hope you figure it out. Sorry I wasn't much more help
Sent from my SPH-L900 using XDA-Developers mobile app
Click to expand...
Click to collapse
Okay Thank You I'll Def Try this
travieso1208 said:
Okay Thank You I'll Def Try this
Click to expand...
Click to collapse
Hope it helps
Sent from my SPH-L900 using XDA-Developers mobile app
So I got a clean logic board. Just have to install it and The phone should work fine ?
Thank You
Yes a new logic board should fix your issues. Just remember you'll have to activate that one because it's a totally different meid/esn. I had to swap one on an s3 because of a bad port. Sure it's similar too since it's Samsung.
Sent from my SPH-L900 using XDA-Developers mobile app
travieso1208 said:
Would you know if switching out the board is just plug and play ?
Click to expand...
Click to collapse
Yeah its pretty simple... lol except for the try not to lose all the tiny screws part