Develop Bugs

Anyone willing to help? Soft bricked.

I got in way over my head, and I'm humbly asking if someone is willing to help.
After messing around with things I had no business messing around with, I get a start up screen that says Samsung Galaxy SII with a caution/warning symbol below it.
I can restart it into Download mode (power, volume down) and Odin recognizes it plugged into my computer.
If I try to get into the Bootloader (power, volume up), I get a few options, but the Enter (power) button doesn't let me select anything.
At this point, I don't even know if I'm using the right terminology. If anyone can talk on the phone or Skype, you will have my eternal gratefulness.
Thanks, and sorry for treading where I shouldn't.

Let's start from the beginning: what did you flash, what recovery do you have now and can you get into download mode?
Sent from my SPH-D710 using xda app-developers app

First thing you need to do is download the EL 29 one click from SFhub. After that going to download mode and use the one click .
Sent from my Nexus S 4G using Tapatalk 2

I followed QBKing77's video on how to root on FF18. It went fine, I did a root check and had the superuser icon.
Then I followed his video on installing CWM. Did that.
Downloaded CM 7 zip and tried installing it through the bootloader (Agat or something like that). It would get to the end, and give me a Status 7 error.
In frustration and stupidity, using Odin, I installed some .tar file, and that killed it.
Yes, I can get into download mode.
I hope that answered your question. I just want to know how to either a) get it to CM7, or b) go back to stock.
Thanks!

Enter is the home button. Also you might be on stock recovery. Ya its recovery not bootloader. Does it say <3e> ?
sent from my BAD A$$ Epic touch

patrao_n said:
Enter is the home button. Also you might be on stock recovery. Ya its recovery not bootloader. Does it say <3e> ?
sent from my BAD A$$ Epic touch
Click to expand...
Click to collapse
Yes. It says 3e. I can use volume keys to move it up and down the list, but the Power/Enter button doesn't do anything.

davidstjohn1 said:
First thing you need to do is download the EL 29 one click from SFhub. After that going to download mode and use the one click .
Sent from my Nexus S 4G using Tapatalk 2
Click to expand...
Click to collapse
I did, and it failed.

How did it fail?

rovar said:
How did it fail?
Click to expand...
Click to collapse
It sat like this for a 20 minutes...
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..

Check your private msgs.

[Q] Can't ODIN Epic 4g Stuck in Firmware Upgrade encountered an issue?

After trying to ODIN a stock rom I am now stuck on the screen, firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. I can get into the ODIN download mode, but every rom I download fails. I want to through this freaking phone as I've been working on this for hours with many different roms and they ALL fail. Any help please and thank you - Adam

Not sure what your doing or how. Sounds like you got an OTA and tried to install it. Or you're installing something else.
But if you have an Epic 4G Touch (Sprint).
Then here is your solution.
Download sfhub's One-Click here: http://forum.xda-developers.com/showthread.php?t=1721229 [Choose Reset or No data, your choice.
Install the latest Samsung drivers http://org.downloadcenter.samsung.c...342248/Sprint_d710_USB_Driver_v1_3_2360_0.exe
Put your phone into download mode:
Power off completely
Then Hold the Power On + the Volume Down buttons till you get to a 'confirmation' screen and click the Volume Up button to enter 'Download Mode'.
Launch the One Click on your PC.
Then plug you phone into the PC via USB cable. You should see a COMM port light up.
Then click on start and you will be back to stock (and rooted).
If you want a CWM recovery (and kernel, they are together) you can use sfhub's 'Autoroot' package to add that.
The directions there are VERY detailed and simple to follow.
Take your time.
Read through the stickies, how tos and tutorials and through the many posts by the developers. Or you will end up with a pretty paperweight.
Good luck

Still don't know what is wrong with my phone, every time I ODIN=FAIL
I follow the directions to a T, Here is what ODIN spits out at me:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.bin
<ID:0/003>
<ID:0/003>
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks for the help guys, I'm totally scared I bricked my phone but at the same time happy I can still get the computer to recognize it. I just don't know what to do...
leaderbuilder said:
Not sure what your doing or how. Sounds like you got an OTA and tried to install it. Or you're installing something else.
But if you have an Epic 4G Touch (Sprint).
Then here is your solution.
Download sfhub's One-Click here: http://forum.xda-developers.com/showthread.php?t=1721229 [Choose Reset or No data, your choice.
Install the latest Samsung drivers http://org.downloadcenter.samsung.c...342248/Sprint_d710_USB_Driver_v1_3_2360_0.exe
Put your phone into download mode:
Power off completely
Then Hold the Power On + the Volume Down buttons till you get to a 'confirmation' screen and click the Volume Up button to enter 'Download Mode'.
Launch the One Click on your PC.
Then plug you phone into the PC via USB cable. You should see a COMM port light up.
Then click on start and you will be back to stock (and rooted).
If you want a CWM recovery (and kernel, they are together) you can use sfhub's 'Autoroot' package to add that.
The directions there are VERY detailed and simple to follow.
Take your time.
Read through the stickies, how tos and tutorials and through the many posts by the developers. Or you will end up with a pretty paperweight.
Good luck
Click to expand...
Click to collapse

victimless said:
I follow the directions to a T, Here is what ODIN spits out at me:
Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
Checking MD5 finished Sucessfully..
Leave CS..
Odin v.3 engine (ID:3)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
recovery.bin
All threads completed. (succeed 0 / failed 1)
Thanks for the help guys, I'm totally scared I bricked my phone but at the same time happy I can still get the computer to recognize it. I just don't know what to do...
Click to expand...
Click to collapse
Hey Adam, real quick: Just want to confirm you have an e4gt and not the epic 4g as the title says.. I know leaderbuilder stated it, but you didn't confirm.
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2

Epic 4g Touch
Yes, sorry, the title is misleading, Epic 4g Touch.
MoHoGalore said:
Hey Adam, real quick: Just want to confirm you have an e4gt and not the epic 4g as the title says.. I know leaderbuilder stated it, but you didn't confirm.
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2
Click to expand...
Click to collapse

victimless said:
Yes, sorry, the title is misleading, Epic 4g Touch.
Click to expand...
Click to collapse
Can you link to the Odin you attempted or did you try the ff18 LB linked for you?
And please clarify that you used a one click or manual Odin.
:edit: I found this thread that was the exact situation that you're in. Looks like manually using Odin might get you back on track if One clicks keep failing.
http://forum.xda-developers.com/showthread.php?t=1492771
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2

I used the ff18 linked to me one click...
MoHoGalore said:
Can you link to the Odin you attempted or did you try the ff18 LB linked for you?
And please clarify that you used a one click or manual Odin.
:edit: I found this thread that was the exact situation that you're in. Looks like manually using Odin might get you back on track if One clicks keep failing.
http://forum.xda-developers.com/showthread.php?t=1492771
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2
Click to expand...
Click to collapse

victimless said:
I used the ff18 linked to me one click...
Click to expand...
Click to collapse
Take a look at that thread i linked. Try manually using Odin to flash the individual pieces.
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2

YEA!!! Thankyou MoHoGalore, after trying many times I finally had to remove the sd card, make sure everything was setup in odin before plugging my phone in, and the stuff started going through, thanks guys! LOVE XDA, thought I lost my phone and my mind there for a minute....:laugh:
MoHoGalore said:
Take a look at that thread i linked. Try manually using Odin to flash the individual pieces.
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2
Click to expand...
Click to collapse

That's good to know. Thanks for the update on what you did.
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2

Galaxy S2 Freezes on Start and Won't Flash Anything

I recently acquired an Epic 4G Touch that wouldn't boot into the stock ROM. I thought "Awesome! The ROM must be corrupted. I'll just Odin it back to stock and have a new SG2." Well, I tried Odining it back to stock. I tried the Gingerbread EL29 stock tar image and it hung on the Sbl.bin. I thought maybe my download was just corrupt but after trying 2 other GB odin images it still wouldn't flash. Then I tried flashing CWM recovery through odin and that hung at NAND Write Start. I've switched cables, USB slots and computers. I'm at a loss as to why this is happening. I would really like to get this phone running so I can upgrade my SGS1.
Edit- Just to clarify, I never tried to flash anything through CWM. I tried flashing a kernel that had CWM through Odin.

I put the ROM into the PDA slot. Here's what happened in Odin:
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_SPH-D710_CL839620_user.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> boot.bin
<ID:0/011> NAND Write Start!!
<ID:0/011> Sbl.bin
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Also tried flashing a PIT file,
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I wish I would get some sort of response...

Since you can still get into download mode, try this thread.
http://forum.xda-developers.com/showthread.php?p=30996944
:edit: And I failed to mention that this seems to be the 4th thread in the past few weeks and the previous posters didn't fair well.
I hope the best for you.
Sent from my SPH-D710 using Xparent ICS Tapatalk 2

MoHoGalore said:
Since you can still get into download mode, try this thread.
http://forum.xda-developers.com/showthread.php?p=30996944
:edit: And I failed to mention that this seems to be the 4th thread in the past few weeks and the previous posters didn't fair well.
I hope the best for you.
Sent from my SPH-D710 using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
Thank you for the response. I cannot get into my recovery and my phone will not flash anything in Odin without some sort of error. I think it hosed. He mentioned sending it off for a jtag repair? What exactly is that?

xDecapitator said:
Thank you for the response. I cannot get into my recovery and my phone will not flash anything in Odin without some sort of error. I think it hosed. He mentioned sending it off for a jtag repair? What exactly is that?
Click to expand...
Click to collapse
This is very confusing... How are you trying to flash with CWM if you can't get into recovery mode?
What exactly is happening with the device when you try to power it on?
What happens when you try to go into download mode using Vol down+power?
What happens when you try to get to recovery using vol up+power?

graydiggy said:
This is very confusing... How are you trying to flash with CWM if you can't get into recovery mode?
What exactly is happening with the device when you try to power it on?
What happens when you try to go into download mode using Vol down+power?
What happens when you try to get to recovery using vol up+power?
Click to expand...
Click to collapse
Agreed.
Op - You're trying to write to the phone and, my guess is, you're making a bad situation worse since your getting partial writes. Especially that first screen where pit was mapped and partial flash took, such as boot.
Dont know where crawrj is, but try reaching out to Garwynn. He knows A LOT.
Sent from my SPH-D710 using Xparent ICS Tapatalk 2

MoHoGalore said:
Agreed.
Op - You're trying to write to the phone and, my guess is, you're making a bad situation worse since your getting partial writes. Especially that first screen where pit was mapped and partial flash took, such as boot.
Dont know where crawrj is, but try reaching out to Garwynn. He knows A LOT.
Sent from my SPH-D710 using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
What? When did I say I was flashing through CWM? I've never even been able to boot to CWM. I said I was trying to flash CWM through download mode which failed. When I try to boot, it sticks at the Samsung Galaxy S2 kernel load screen. When I try to boot into recovery it sticks at the Samsung Galaxy S2 kernel load screen.

xDecapitator said:
What? When did I say I was flashing through CWM? I've never even been able to boot to CWM. I said I was trying to flash CWM through download mode which failed. When I try to boot, it sticks at the Samsung Galaxy S2 kernel load screen. When I try to boot into recovery it sticks at the Samsung Galaxy S2 kernel load screen.
Click to expand...
Click to collapse
Sorry. I misread the OP.
Ok. Try this to get into Recovery
Press and hold the vol up+power button until the splash screen shows up
After the splash shows release the power button and then continue to hold the vol up button. It should take you right to recovery.

graydiggy said:
Sorry. I misread the OP.
Ok. Try this to get into Recovery
Press and hold the vol up+power button until the splash screen shows up
After the splash shows release the power button and then continue to hold the vol up button. It should take you right to recovery.
Click to expand...
Click to collapse
I've done this atleast 20 times (21 now after this post) and it just sticks at the Samsung Galaxy S2 screen. I'm sure I screwed it even further by trying to flash CWM recovery. When I first got it, it booted into the recovery screen but wouldn't actually fully load into recovery. I would just get the Android character but no text. These are the weirdest issues I've ever had with an Android device.

xDecapitator said:
I've done this atleast 20 times (21 now after this post) and it just sticks at the Samsung Galaxy S2 screen. I'm sure I screwed it even further by trying to flash CWM recovery. When I first got it, it booted into the recovery screen but wouldn't actually fully load into recovery. I would just get the Android character but no text. These are the weirdest issues I've ever had with an Android device.
Click to expand...
Click to collapse
That is very strange...
Do you have an external SD card installed? If so, remove it and try to boot into recovery again.

graydiggy said:
That is very strange...
Do you have an external SD card installed? If so, remove it and try to boot into recovery again.
Click to expand...
Click to collapse
Still no luck :|

It fails every time it trys to flash files to the NAND memory. Does this mean the internal storage is screwed?

xDecapitator said:
It fails every time it trys to flash files to the NAND memory. Does this mean the internal storage is screwed?
Click to expand...
Click to collapse
That is possible. You can try to call Sprint and tell them you/a friend was trying to update to ICS and rebooted and it wont boot fully. Act dumb and see if they will replace it. Since it won't boot to anything at all, there is really no way for them to tell. Just say that you bought it from said friend. It is worth a shot. I have done it before with AT&T when I screwed up a Captivate doing a hardware mod.
I just told them that I bought it online and tried to update it but after the update, it wouldn't power on. They let me replace it.
---------- Post added at 09:54 PM ---------- Previous post was at 09:52 PM ----------
Either that or try J-Tag. But I don't know if that will fix it.

That and it's 50 bucks and a time to wait..
Sent from my SPH-D710 using Xparent ICS Tapatalk 2

graydiggy said:
That is possible. You can try to call Sprint and tell them you/a friend was trying to update to ICS and rebooted and it wont boot fully. Act dumb and see if they will replace it. Since it won't boot to anything at all, there is really no way for them to tell. Just say that you bought it from said friend. It is worth a shot. I have done it before with AT&T when I screwed up a Captivate doing a hardware mod.
I just told them that I bought it online and tried to update it but after the update, it wouldn't power on. They let me replace it.
---------- Post added at 09:54 PM ---------- Previous post was at 09:52 PM ----------
Either that or try J-Tag. But I don't know if that will fix it.
Click to expand...
Click to collapse
OK I will definetly try that, thanks. If they don't replace it, I will just sell it for parts and keep using my Epic 4G. Thanks for all of your help

Wait oh wait I have a few questions myself lol what odin are you using? Did you try any one clicks? Did you try removing the sd card and then odin? Did you try to leave battery out all night then try odin again with no sdcard?
Sent from my SPH-D710 using xda premium

I tried 2 different versions of Odin;1.x and 3.x. I used multiple one clicks. I pulled the sd card before flashing. I had to buy a battery for it when I got it and the previous owner had kept the battery out of it for at least a month. I really appreciate all answers but I really feel like I've tried everything :|
Sent from my SPH-D700 using Tapatalk 2

It is possible using a pit file would help. The pit file from when this phone came out would be best. Then run a gb rom in odin along with the pit. If you find the pit link it here before you use it. Wouldn't want more problems.
sent from MY BAD A$$ ET4G

patrao_n said:
It is possible using a pit file would help. The pit file from when this phone came out would be best. Then run a gb rom in odin along with the pit. If you find the pit link it here before you use it. Wouldn't want more problems.
sent from MY BAD A$$ ET4G
Click to expand...
Click to collapse
One Click restores are built with the proper pit of 9-16-11. But it sounds like he's already tried multiple builds.
Flashing each component isn't a bad suggestion but with using the pit, I wouldn't necessarily use just a rom, I'd use a tar since it would contain everything needed to restore the bootloader (boot, Sbl, param, recovery..)
Or try flashing an built bootloader to see if he could get back into recovery alone. There are a few already made in RWilco's Repo..

[Q] Think i bricked my Galaxy Note 2?

For one reason or another, i had a lot of crap on my internal storage of my Galaxy Note 2. I booted into the volume up + power + menu mode and formatted my sd card thinking that it would wipe the data and start me off fresh. However for some reason i also decided to format everything else, and now my phone is stuck on the samsung logo when i boot up, Any help guys? :/

Can you get into download mode volume down button+power button+home button?
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

yes i can, download mode right?

Cyferous said:
yes i can, download mode right?
Click to expand...
Click to collapse
Then there's hope you have a soft brick... Do you have the note 2 tool kit?... Flash the stock rom using Odin
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

Do i flash with odin or the toolkit?

My friend u only need to restore to factory from within download mode.

I've tried restoring to factory, clearing cache and even flashing a stock rom with Odin. the problem is with odin I now keep getting a error message and the flash fails. I've tried using older and newer versions of odin, switching the cable and usb ports. The error message that i keep getting is:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Enter CS for MD5..
<ID:0/004> Check MD5.. Do not unplug the cable..
<ID:0/004> Please wait..
<ID:0/004> Checking MD5 finished Sucessfully..
<ID:0/004> Leave CS..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
kinda getting desperate for help here, google turned up little to no answers :/

Cyferous said:
For one reason or another, i had a lot of crap on my internal storage of my Galaxy Note 2. I booted into the volume up + power + menu mode and formatted my sd card thinking that it would wipe the data and start me off fresh. However for some reason i also decided to format everything else, and now my phone is stuck on the samsung logo when i boot up, Any help guys? :/
Click to expand...
Click to collapse
Go here download your firmware. Use Odin to flash. http://forum.xda-developers.com/showthread.php?t=1987541
The one with M behind it is Canada
Sent from my SGH-I317 using Tapatalk

Cyferous said:
Do i flash with odin or the toolkit?
Click to expand...
Click to collapse
You can either flash it using toolkit which will automatically open up Odin or just go straight to odin
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

BR7fan said:
Go here download your firmware. Use Odin to flash. http://forum.xda-developers.com/showthread.php?t=1987541
The one with M behind it is Canada
Sent from my SGH-I317 using Tapatalk
Click to expand...
Click to collapse
This HERE^^^^^^^^^^^^^^^:thumbup:
All you need is the original firmware, flash that thru Odin and you'll be back up and running...
Go to section#5 for your firmware.
[Q]
Which GN2 do you have??
Att/TMO or Rogers??
Sent from my SAMSUNG-SGH-I317 using Tapatalk

Alright guys, thanks i fixed it. Apperently i was using the wrong stock rom verson of the N7100 instead of my SGH-T889V. The odin flash worked and now m y phones back up and running. Thanks again for all your help!

Help Soft Bricked Cant Go back to stock

Hello,
So I installed the Rainbow 7 rom and it worked great for 2 days. Next thing I know Im stuck at the Samsung note 2 screen. Im like OK lets open TWRP and restore from Backup. Some how I manage to erase the OS and now I can't even return to Stock. When I try to flash tar I get failed. Phone does go into download mode fine and recovery. TWRP shows my sd and internal as (0) MB but when I use my ext sd card on pc all files are there so cant flash via recovery. Kies does not work either I tried the latest version of TWRP via Latest version of ODIN nothing file is good then I get The Below with OH3
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
With NE2 STOCK in Odin I GET note 2 re-partition operation failed.............
I have always been able to restore my backups or flash back to stock but this time in Stuck. Any Thoughts?
TWRP states no OS found even if I wiped all of the system and data files Should I not be able to go back to stock ? I've tried NE2 and OH3
I have searched and searched and tried but nothing seems to work. If it boots to download mode and recovery it's not a hard bricked it ??
FYI I have tried 2 pc's using different ports and different cables also

When you boot into recovery does it show failure to mount any partitions (system, data, cache)?
Sent from my LG-D851 using XDA-Developers mobile app

cidxtc said:
When you boot into recovery does it show failure to mount any partitions (system, data, cache)?
Sent from my LG-D851 using XDA-Developers mobile app
Click to expand...
Click to collapse
Hello
Yes All of them that your saying. I tried usb on the go and it appears it will install but then same thing error signal 9 and failure to mount any partitions.
Thank you For looking

any suggestions ?
Thank You

travieso1208 said:
any suggestions ?
Thank You
Click to expand...
Click to collapse
I seen a few other users with same issue. Only way that I have seen it fixed is by replacing the main board. Sorry to give bad news.
Sent from my LG-D851 using XDA-Developers mobile app

Ahhh okay thank you

Would you know if switching out the board is just plug and play ?

You could always try to Odin back to stock. Since you can get into recovery i imagine you can get into download mode.Its worth a shot before you order a board and open the phone. Link for the process I was suggest the PC version
http://forum.xda-developers.com/showthread.php?t=2780984
Edit: fixed link to reflect the correct bootloader.
Sent from my SPH-L900 using XDA-Developers mobile app

beansnorice said:
You could always try to Odin back to stock. Since you can get into recovery i imagine you can get into download mode.Its worth a shot before you order a board and open the phone. Link for the process I was suggest the PC version
http://forum.xda-developers.com/showthread.php?t=2780984
Edit: fixed link to reflect the correct bootloader.
Sent from my SPH-L900 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks I'll Give it a shot but it has failed in the past

I dont know if this matters but according to the rainbow 7 install instructions I was supposed to have bootloader of 4.3 or newer.. if i didnt could. This be the cause of everything. I can't believe there isn't a way to fix this without changing the board.

It could very well be why it fails the link above was to the 4.4.2 bootloader if it doest help or fail I have no idea about swapping out the board. I've replaced antanneas and ifixit has a complete teardown of the phone https://www.ifixit.com/Device/Samsung_Galaxy_Note_II hope you figure it out. Sorry I wasn't much more help
Sent from my SPH-L900 using XDA-Developers mobile app

beansnorice said:
It could very well be why it fails the link above was to the 4.4.2 bootloader if it doest help or fail I have no idea about swapping out the board. I've replaced antanneas and ifixit has a complete teardown of the phone https://www.ifixit.com/Device/Samsung_Galaxy_Note_II hope you figure it out. Sorry I wasn't much more help
Sent from my SPH-L900 using XDA-Developers mobile app
Click to expand...
Click to collapse
Okay Thank You I'll Def Try this

travieso1208 said:
Okay Thank You I'll Def Try this
Click to expand...
Click to collapse
Hope it helps
Sent from my SPH-L900 using XDA-Developers mobile app

So I got a clean logic board. Just have to install it and The phone should work fine ?
Thank You

Yes a new logic board should fix your issues. Just remember you'll have to activate that one because it's a totally different meid/esn. I had to swap one on an s3 because of a bad port. Sure it's similar too since it's Samsung.
Sent from my SPH-L900 using XDA-Developers mobile app

travieso1208 said:
Would you know if switching out the board is just plug and play ?
Click to expand...
Click to collapse
Yeah its pretty simple... lol except for the try not to lose all the tiny screws part