Develop Bugs

XDA II GPS Bluetooth dock

I Received a Blue Angel ( HTC XDA II ) ROM #( 1.03.00 USA ) 9/24/03 IMEI #(351938000193819)
I Bought the Bluetooth Dock For a Pharos i360 GPS.
My XDA II will not find the com port to communicate with the Blutooth Dock on the Pharos Unit. I have called tech support for Pharos and determined that:
There seems to be no prompt screen to get to a
Serial Profile for Bluetooth ( to set Outbound and Inbound Com setting) on my PDA.
I should be able to set the Com-port in the PDA, not just in the Pharos Program.
I only get a Rename, or Delete option, no Connect or Configure options
Any Sugestions?

Read Blackstone Phonebook while connected with bluetooth Audi MMI

I'm looking to have access to the Blackstone phonebook when I connect it in rSAP mode to my Audi MMI.
Because I dont have the very brand new MMI with harddisk navigation and new integrated phone) I can only select numbers from SIM card.
Any comments/suggestions?

I've got an Audi A6 and I use software from jetwaremobile.com to sync my HTC with the MMI.
First try to install the demo version and then look for a config file that lets you SWITCH PHONEBOOKS (between SIM and Outlook).
In my Audi I've got to sync the Outlook Phonebook, Incoming/ Missed/ Outgoing calls and signal strenght.
NOTE: Do not try the AUDI MMI configuration that appears on the web page. It's not necessary and doesn't work.

Mode Handsfree vs. rSAP
thx for your answer.
It sounds to me you are connected in "handsfree mode" - could you check the small sign at the MMI display?
Should show 2 x symbols (1 bluetooth-symbol and 1 signal bar symbol) - right?

I have got the same issue with my VW Passat. It worked fine with Nokia phones, but I also cannot get the phone book over SAP with Win Mob. Tried all version patches etc. But have not been able to find a solution.
The work-around: Copy the needed contacts to your SIM, hide SIM contacts in the phone and let the car sync with the SIM card. It is not the best solution but at least it works.
Grtz Remko

Teh reason why...
The reason is the use of a proprietary use of a Nokia phone unit in the car of VAG in the past.
All new cars are able to communicate in the right way of bluetooth..
(I tried it successfuly with my HTC Touch HD and a brand new A6 - all worked perfect!)

Did you use the "Handsfree" profile in the Audi, cause I know this works fine? I've tried this with a few rentals.
The problem arises as soon as you want to connect using the Bluetooth SAP profile. In my Passat I have no other option as SAP and I actually like this function, just this phone book issue...

Handsfree
I dont like "Handsfree" because I have to use my inbuilt phoneunit of my Audi - and so I need the SIM access- Biggest advantage is the us of an external antenna with very strong signal.

Nobody else with a hint?

OldFellow said:
thx for your answer.
It sounds to me you are connected in "handsfree mode" - could you check the small sign at the MMI display?
Should show 2 x symbols (1 bluetooth-symbol and 1 signal bar symbol) - right?
Click to expand...
Click to collapse
Sorry for the delayed answer.
Yes I've got two symbols, the bluetooth and the signal bar.
I realized that symbols on MMI depends on the implementation of the bluetooth protocol of the phone. For instance, with sony-ericsson I used to have bluetooth, signal bar, SIM entrys (not phone contacs), incoming, outgoing, missed calls, etc.
But with Motorola the only thing I used to get was the bluetooth symbol (no contacts, calls, etc.)
This is exactly what happend when I first connected my HTC, so I searched for a solution. Since I have JetweareMobile I've got the same features than with sony-ericsson, and even more, because I can sync both SIM and PHONE contacts.
It's nicely resolve because when you toggle to PHONE CONTACTS, you get your contact's names in the MMI with a /W, /H and /M for work, home and mobile numbers (you may have several numbers per contact)
If you have the bluetooth car kit and you're having problems, give it a try.

Same result without jetwaremobile.com
ok pitaXDA - thx for your answer.
So I was right - your are using the HTC in "Handsfree" mode - this works fine with the standard Bluetooth Software installed on the HTC - you will not need this extra peace of software.
I don't like the handsfree-mode, because it only uses the Bluetooth connection for the phonebook.
I'm using the rSAP mode - because I want to use the external phone antenna of my A6 and also the phone funtion at the HTC is disabled (like Airplane mode) to save power. The disadvantage for me is the use of phonenumbers stored on SIM only (there is no synch of the "normal" phonbook in that mode)

TP2 / Kenwood BT Contacts Download Issue

I have a Kenwood KDC-MP642U car audio system with Bluetooth capabilities and I have my HTC Touch Pro 2 [t-mobile] successfully paired and working great with 1 annoying exception.
As soon as the units connect to each other the contacts / phone book start downloading from the phone to the Kenwood system which is fine, however..... after EVERY call the contacts download fully again making the phone barely usable [slow] until the full phone book is downloaded. [90 secs for 150 contacts]
There is no setting on the Kenwood unit to not allow automatic download... if the phone supports it.... it will download. I was told by sales rep that his Kenwood did that as well and just to live with it ? ? ? ? ? ?
I have tried to find the appropriate registry setting on TP2 to deny auto PBAP access and download and cant find any help on this...... any help would be greatly appreciated.

I have the same setup, and noticed it on my prior phone as well (Motorola KRZR K1). I believe that the phone is updating the "recent calls" list on the headunit. I know for me the second download is MUCH faster than the first.
I haven't seen any information about preventing the update download.

this should do the trick:
http://forum.xda-developers.com/showthread.php?p=3848325
Question: does it show up as one of the profiles under the bluetooth paired devices list?

Touch Pro 2 - Bluetooth Compatability

I have a compatability problem between my new HTC Touch Pro 2 and my new Volvo XC 60 as detailed below. HTC say the following
The Bluetooth stack refers to the suite of protocols that are compiled to provide Bluetooth functionality. At this time, there is currently no official software available that will correct this issue. It may be possible for you to obtain third-party software
Is there anyone who may know if such a Third Party Software provider who can resolve this, many thanks
Regards
Symptoms of failure of the Bluetooth set up
Does dial out but doesn’t ring inside the phone
Does connect to other end but no voice can be heard at either end
Does download the phonebook
Background
Phone shipped as HTC Touch Pro 2 with Windows Mobile 6.5 – ROM 1.86.401.0 (401 Designates English)
Car delivered as follows Volvo XC 60 – 04.22_R Bluetooth
Phone publicised on Volvo Cars web site as compatible
Firmware must be version ROM 1.19.413.2
Downgraded the phone to ROM 1.19.413.2, phone becomes Swedish + Windows Mobile 6.1
Downgrade the phone to ROM 1.19.401.1 phone becomes English + Windows Mobile 6.1
Without setting up the e-mail the phone becomes compatible with car Bluetooth for voice and phonebook
Setting up e-mail the phone returns to the original issue as per symptoms
Upgrade back to ROM 1.86.401.0 + Windows Mobile 6.5
Without setting up the e-mail the phone becomes compatible with car Bluetooth for voice, says that it downloads the phonebook, but no data is available from car side
Setting up e-mail the phone returns to the original issue as per symptoms
Yesterday upgrade car so that latest version of Bluetooth for Volvo is installed namely 04.23_R
Phone has ROM 1.86.401.0 + Windows Mobile 6.5 installed and email set up, upgrade fails to resolve problem
I hope that this makes sense, if please mail

There are several threads in this forum that provide some answers.
I have a new S80 - experienced the identical problem to yours - and I did the following registry changes:
BlueTooth Fix:
1.Navigate to HKLM\Security\Policies\Policies\
Click "Values" soft-key
Change "00001001" value to 1 (decimal) (recovery note: default is 2)
Change "00001005" value to 40 (decimal) (recovery note: default is 16)
Reboot device.
2. Modify the HandsFree plug-in:
HKLM\Software\WIDCOMM\Plugin\HandsFree
i. Change SupportedFeatures to 45 (default is 1135)
ii. Add value HFBDA binary, set to same value as LastConnectedBda
iii. Add value HFDeviceType decimal 2
3. Modify the WIDCOMM bluetooth general settings:
HKLM\Software\WIDCOMM\BtConfig\General
i. Change bdaddr to (no value)
ii. Change DisableReopenAudio to 0 (default is 1)
4. Reboot device
To find other threads on this forum (and PPC Geeks) search for "Pairing bluetooth with car".

@prubin
you, sir are a genius! I went from having one of the worst wm bluetooth experiences to one of the best! thanks!

Phonebook
Look at this thread if you want the phonebook to work.
http://forum.xda-developers.com/showthread.php?t=591322&page=3
/MrFredd

Touch Pro 2 vs Pioneer Avic x9115bt
I couldn't answer incoming calls. This worked perfectly. Thank you

I have had quite similar problems with my HTC TP2 an a Volvo V50.
Then I found out that there was an update of the BT-software of the car. The Volvo-Service installed the free update of the software in the car. Now it works fine without any problems.

Bluetooth need to press "OK"

Hi, when i connect ZE551ML to my car by Bluetooth, a pop up with "Your Bluetooth is assigned to SIM1" pop up and i need to press OK and close the SIM configuration page.
I have only 1 sim installed and i want an automatic connection. How i can do it?
P.S. my zenfone is configured in "Italian" so i have translate the message in "Your Bluetooth is assigned to SIM1" but it can be different if english language is configured on the Zenfone.

bruceas said:
Hi, when i connect ZE551ML to my car by Bluetooth, a pop up with "Your Bluetooth is assigned to SIM1" pop up and i need to press OK and close the SIM configuration page.
I have only 1 sim installed and i want an automatic connection. How i can do it?
P.S. my zenfone is configured in "Italian" so i have translate the message in "Your Bluetooth is assigned to SIM1" but it can be different if english language is configured on the Zenfone.
Click to expand...
Click to collapse
With V2.14.40.19 the problem is solved