Hi, I have a xda o2 exec , thats in bootloader mode ( v2.01 )
I have uploaded radio verion 1:15 which went to 100% no problem
but when i try to mount a rom ( and I have tried a few different ones ) it only gets to 9% then stops and returns an error message (the error message is shown in the RUU on the pc )
Any ideas ?
ps i dont know if hard SPL, CID or SIM unlock has been run on it before hand as I recieved the phone like this, just wondering what my next option would be?- pleeeeease help
many thanks to BUZZ LIGHTYEAR for the following thread :
http://buzzdev.net/viewtopic.php?f=40&t=36475
problem solved, storage formatted, 6.5 rom installed ....nice
cheers buzz ...
Hi just got my Desire, been a devoted WM user and all android is a bit strange to me. I have a Nexus 1 and love it but i thought i would try the Desire as my friend bought one and was able to use it to sync with our MS exchange server which i was never able to do with the Nexus 1. I was very impressed when i bought the phone that connecting to our VPN and syncing with exchange seemed to work well. I purchased the phone while on a convention trip to prague, as i was needing to connect to our exchange mail. After a few days with the phone It began rebooting on data connections without any notice and would often not reboot some times just flashing the white HTC screen and continually rebooting itself. I decided to try and root the phone to possibley stop this from happening using the excellent instructions from benko286 http://forum.xda-developers.com/showthread.php?t=696189 .
i'm attempting this on a Windows 32 machine so im using the "Guide to root using Windows" after step 5 and running "step1-windows.bat" my Desire screen appears with HTC in the middle and each of the four corners of the screen has a triangel caution symbol. at the end of running the bat file in the command window just before rebooting to boot loader the last line said "FAILED (remote: 51 partition update fail)
and my Desire went into the aboved mentioned screen. I am able from the command prompt to re-run the step1-windows.bat file so I still have usb connection obviously but the same issue continues. I am not sure where to go from here.
My machine if restarted turned off (remove battery) continually comes up with this above mentioned screen, I am hoping that this is not an idicaction of a bricked device. I have tryed my best to go through the vast amounts of great information on XDA- developers, but can't find any pertaining to my situation. Is there anyone out there that can give me a point int he right direction?
Much appreciated.
Blaiz
I can't really help you with this, but am just posting to give this thread a little bump and keep it on the top of the list.
Hopefully someone here might be able to help you out. Good luck,
What is going on? This is the second time i've heard of this thing with the HTC logo in the centre with four triangles in each corner. No one seems to have any idea what this is and i've personally never heard of it throughout the last few months of owning a Desire.
hi thanks so much for the support, I guess lokoing back i should have put this in the tutorial thread. im not sure where i can go from here other than only using the Nexus lol.
this is what it finished with at the command prompt
-----------------------------------------------
INFO[RUU]WP,system,99
INFO[RUU]WP,system,100
INFOstart image[userdata] unzipping & flushing...
INFO[RUU]UZ,userdata,0
INFO[RUU]UZ,userdata,100
INFO[RUU]WP,userdata,0
INFO[RUU]WP,userdata,100
INFOstart image[sp1] unzipping & flushing...
INFO[RUU]UZ,sp1,0
INFO[RUU]UZ,sp1,100
INFO[RUU]WP,sp1,0
INFO[RUU]WP,sp1,100
FAILED (remote: 51 partition update fail)
Rebooting to bootloader...
rebooting into bootloader... OKAY
Step 1 complete - now use the bootloader menu to enter recovery mode.
To do this, press the power button, wait a few seconds, then use the volume keys
and power button to select the RECOVERY option.
C:\TEMP\r5-desire-root-alt\r5-desire-root-alt>
------------------------------------------------------
the step1-windows.bat file seems to run in succession 2 times the first time looks fine then it begins once again to start the flash. at the end of the second run is what i have copied and pasted above. I'm really to much of a newbee to understand what the error is "FAILED (remote: 51 partition update fail)"
as i unplug the usb cable the screen now goes white with
------------------------------------------
BRAVO PVT1 SHIP S-ON
HBOOT-0.80.000
MI CROP-031D
TOUCH PANEL-SYNT0101
RADIO-4.06.00.02-2
Mar 29 2010, 21:34:33
RUU
-------------------------------------
with 2 caution icons in both bottom corners, when i pull out the battery and restart the machine it goes back to the original black screen with HTC and the four caution icons in the corners.
Thanks for any suggestions or information from any sources with similar issues.
All the best,
Blaiz
is there a microsd card in the unit when you try this? Is your phone unbranded? Have you created a gold card?
I have tryed with the original SD card inserted and i have tryed with it removed i have also reformatted the SD card and inserted it then removed it again. The phone i bought is from The Czech Republic, Prague, it was bought unlocked and unbranded i believe from an O2 phone shop in Prague 10 days ago.
I will try the gold card method next but im not sure how to go about this state.
as i am unable to boot the device I can't seem to get adb shell to find the device.
Blaiz said:
as i am unable to boot the device I can't seem to get adb shell to find the device.
Click to expand...
Click to collapse
Open up the phone in RUU mode and plug in your phone.
Download this and execute it
http://shipped-roms.com/shipped/Bra...io_32.30.00.28U_4.05.00.11_release_122704.exe
thanks abc27 downloading now
only question i have is should i not stay with the a similar rom and use a current stock ROM of 1.21.* instead of the 15 or will it matter to get me out of this situation?
Blaiz
such as the
RUU_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4. 06.00.02_2_release_126984_signed.exe
instead as my original bootloader was 0.80.*
Blaiz said:
such as the
RUU_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4. 06.00.02_2_release_126984_signed.exe
instead as my original bootloader was 0.80.*
Click to expand...
Click to collapse
Then you should use that release instead.
I thought you were hboot 0.75 and I didn't want to upgrade your bootloader.
cheers thanks again abc27
is it fixed with it? ^^
i cant believe my luck or lack of it
downloaded the
RUU_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4. 06.00.02_2_release_126984_signed.exe
and i get to about 85% of the Rom image update and it gives me an error!
------------------------------------
ERROR[110]: FILE OPEN ERROR
The ROM Update Utility cannot open the requested files or the files are damaged. The RUU cannot continue with the update.
Please get a complete RUU package and try again.
---------------------------------------
I have tryed 5 times to flash and no luck maybe i should try another ROM file but which one?
Hmm that sounds quite odd.
Try redownloading ROM.
try this one http://www.wuala.com/HTC_Desire/RUU...00.28U_4.06.00.02_2_release_126984_signed.zip
seems the file u downloaded is corrupted
tryed redownloading still exact same issue with
RUU_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4. 06.00.02_2_release_126984_signed.exe
from
http://shipped-roms.com/shipped/Bra...00.28U_4.06.00.02_2_release_126984_signed.exe
Alkymia the file you are directing me to is a zip file no? it doesnt seem to contain the RUU file.
it is a zip to flash it on ur bootloader, u must put the zip onto ur SD card and then try to flash it as u flashed the rom to root it, r u able to enter into bootloader?
Hi folks, I have a WILDFIRE S & have rooted the device and unlocked it also. The only issue iam haveing is turning s-on to s-off, i have tryd several times now to make a gold card, i have gotten this far......
Gold card made, When going to HBoot it says wrong zip, then just hangs on the Jumping to DIAG file.
My HBoot reads as follows...
*** UNLOCKED ***
MARVEL PVT SHIP S-ON RL
HBOOT-1.09.0099
MICROP-0451
RADIO-7.53.39.03M
Feb 8 2012, 18:29:31
i have tryed tons of threads that recon they have done it etc etc. and followed the steps to the letter (even searching
for a diff site to get the reversed key required for making said goldcard).
info on the device its-self...
Model ... HTC Mildfire S A510e
Brand ... Virgin _mobile
Device ... Marvel
Andriod version ... 2.3.5 (Gingerbread) ive not gotten around to doing custom roms on this device as of yet, i want to get this s-on to s-off first.
update...
well i have gold card made yet again from scratch, and have now tryed multiple diag files from diff places , only 2 do anything the rest just hang on Jumping to DIAG.
The ones that do actualy do something get to a grey screen that says Get SW Version ( pressing anything at this time does nothing ), then it says
Verify (something else but it was too quick)
then
Get OEMSBL time out!
Pls chk security flag
Press VOLDN to exit
so i press vol down, (have done this several times now with diff PG76DIAG.nbh from over the net (ie 4 share, filehost, mediafile, u guys also who post links for said file, alot dont work).
then says
Waiting for
GSM ready
then
Power =) Reflash
Vol -Dn =) DIAG so diag is selected and TP Calibration goes on , says all is ok, format goes ok , then i get
Clean S58 Data
Device Info
I select Clean S58 Data and then confirm to clean data and it doesnt say clean ok or anything like i have seen over the net, it just reboots, and has not turn'd S-ON to S-Off, some help i think is needed as i shouldnt be getting Get OEMSBL time out!, Pls chk security flag, Press VOLDN to exit happening.
You'll need an XTC-Clip to get S-Off on the WFS. See this topic.
Hello, few days back it was hanged and i restarted it by taking the battery out, from then its digitizer is not working.
i believe that its is corrupt and i want to reinstall its android operating system.
as now i cant install apps on it so i have it rely on pc and hboot.
BUZZ PVT SHIP S-ON
HBOOT-1.01.0002
MICRO-0622
RADIO 3.35.20.10
DEC 2 2010
Made in Taiwan PC49100
I have tried to install
1- some RUU.exe from pc but they leave me with error : customer id error 131 obtain correct utility for your device.
2 - Update.zip also give signature verification error.
now what can be done.
this problem should be resolved my some software or this device hardware is dead and a punch in software face.
hope to resolve.
Developer150 said:
Hello, few days back it was hanged and i restarted it by taking the battery out, from then its digitizer is not working.
i believe that its is corrupt and i want to reinstall its android operating system.
as now i cant install apps on it so i have it rely on pc and hboot.
BUZZ PVT SHIP S-ON
HBOOT-1.01.0002
MICRO-0622
RADIO 3.35.20.10
DEC 2 2010
Made in Taiwan PC49100
I have tried to install
1- some RUU.exe from pc but they leave me with error : customer id error 131 obtain correct utility for your device.
2 - Update.zip also give signature verification error.
now what can be done.
this problem should be resolved my some software or this device hardware is dead and a punch in software face.
hope to resolve.
Click to expand...
Click to collapse
Look at the downgrade your hboot to 1.01.001 thread and follow its steps. It will fix your ROM and downgrade your hboot as well ( an issue when trying to run an ruu)
Sent from my HTC Desire S using Tapatalk
Ok so here is what happened.
I bought this phone (HTC ONE M8) online on ebay. It says it shipped from Honk Kong.
Everything was all hunky dooreey until...
One day (last week) it asked me to do an update, I kept saying "remind me after 4 hours", I mean who has time for an update right?
Then I accidentally clicked it... and voila! I can now only access the android recovery screen and the bootloader menu.
So I went banging on HTC's door. I talked to a few of their agents and was told my phone was american (AT&T) and I was in the UK, so the UK agents could not help me.
So I went to the US guys and chatted with them. The agent told me my phone had an american OS installed and I resided in the UK, so when I updated my phone, it crashed... or something like that.
They then escalated my case and I was talking to the HTC dev agent. I gave him my 'fastboot getvar all' code and he said he could provide "limited help".
BUT... he gave me the link for this site and so I'm guessing If that guy thought you can help me, (and he works for HTC), you guys are the one's who will help a brother in need.
It had no problems prior to this...
here is what it says on the bootloader screen:
*** Software status: Official ***
*** LOCKED ***
M8_UL_CA PVT SHIP S-OFF
CID-11111111
HBOOT-3.19.0.0000
RADIO-1.29.214500021.12G
OpenDSP-v51.2.2-00593-M8974_FO.1015
OS-6.12.401.4
What should I do?
Can I manually install the UK OS onto my device?
I come full of hope....
Read this : http://forum.xda-developers.com/htc-one-m8/help/help-htc-one-m8-bricked-t3298412
especially post no. 4 & 6
and need the details as post #5
I'll check your reply tomorrow
***UPDATE***
ckpv5 said:
Read this : http://forum.xda-developers.com/htc-one-m8/help/help-htc-one-m8-bricked-t3298412
especially post no. 4 & 6
and need the details as post #5
I'll check your reply tomorrow
Click to expand...
Click to collapse
It says: 'fastboot' is not recognized as an internal or external command, operable program or batch file.
***UPDATE***
I did not download the adb file from post #4.
After downloading it, I did not click on it and select :
Y;
Y;
N.
Once I did, it was working, and now so is my phone...
I guess the HTC agent was right in sending me to you guys... Thanks man! Much appreciated bredren. :highfive: