Related
So what do people recommend as the best screen protectors to choose from for the MT4G?
I know everyone has their own opinions on them, but I'm hoping people can post their pros/cons and we can help us all narrow down the choice to a few.
Thanks!
the phantom skinz screen protector! pros: clear, nice feel, covers the whole front. cons: none if installed correctly.
I like the Reallook one. Clear, durable and feels like the glass.
I had the realook and phantom skinz. I settled on phantom skinz. I have the full body matte, plus clear phantom skinz. (Don't install the matte screen protector from PS).
Realook is very good with clear BUT the only thing that sucks is that you get ALOT of oils/fingerprints, etc on it. Easy install and easy clean with soap/water.
Phantom skinz gets oil on the screen too, but not as much. Screen surface is alittle "gummy". (Orange peel is very little to non existant). Watch out as the adhesive backing will attract lint (during installation) and you WILL not be able to get that off. PS also has lifetime warranty = unlimited screen protector replacements. (got the whole kit for $12 during 50% off cyber monday).
Don't bother getting invisible shield, they suck and give you orange peel, and it's thick.
@Jaylito,
Did you notice any kind of cloudiness after you cleaned your screen with alchol/towel? (assuming you've cleaned your screen with alcohol/water) For some reason, mine clouded up on the top.
yeah I have. I guess it's normal tho. goes away if u keep rubbing the screen back & fourth with ur thumb. guess since the material... if it gets wet, it'll cloud a bit cause the moisture seeps thru the inside but it'll dry out bro.
guess I have to do more rubbing then cause it's still cloudy...
oh well....
I tried PhantomSkinz and that was a pain to put on (w/ water and soap), Realook was easy and it didn't peel at the edges.
Zagg Invisishield. Lifetime Warranty.
realook, hands down.
pros: crystal clear, feels like the glass itself, easy to clean, easy to apply, easy to reapply.
cons: a little expensive ($10 for 2, but its totally worth it)
MT4G_Slave said:
I tried PhantomSkinz and that was a pain to put on (w/ water and soap), Realook was easy and it didn't peel at the edges.
Click to expand...
Click to collapse
Weird... for me, PS was MUCH EASIER than realook.
PS allows movement up/down/left/right with ease, and then you just squeeze out water.
For realook, it sucked to align the edges cause you can't move the film once you've "stickered" it on. Then you have to peel it back off and realign, causing lint (in my case) to adhere, and then I have to clean it again.
For me the realook was the best by far. I tried a couple of the wet app kind like invisishield and clear freak on the 4 mt4gs that I had and the realook was the best. I agree its a pain to put on, especially if you have animals because of dust and hair, but if you apply it in the bathroom after letting it steam up from the shower, I've found I can get it on without too much dust or hair falling on the screen. Also, get some extra scotch tape and place it on the front of the realook screen to keep your fingers off the adhesive side while applying it. Another nice thing is that each protector comes with two dots to apply to the camera lens in the back.
The only bad thing is that I think the realook attracts fingerprint grease worse than the wet app kind.
I have a zagg on my nexus s mostly because its all that's out right now and will put a realook on as soon as they are available.
Sent from my Nexus S using XDA App
The Boxwave screen protectores look pretty good too, though I've never tried one myself.
Ghost Armor. Just added it today on my 4G n its cut to fit perfectly, including the sensors n camera. FEELS like the real glass n doesn't take away from the display like the ones Tmo sales. Avoid those *****es like the plague.
I used Zagg for my Nexus S.
I get generic ones from a guy named lcd-protectors on ebay, 5 for $3.50. They're the stiff kind with two protective layers that you peel off, one before you apply and one after. I'm too cheap to pay more.
i just ordered a full body cover kit from stealthguards.com
choosing the clear type and none of the colored ones, it was $2.85 (full body protection, just pay shipping)
$2.85 sure beats dishing out $25 for zagg which is the same crap.
What do you need a screen protector for? I haven't used a screen protector since I bought the G1 at launch, and I've never had a screen scratch. Keys in my pockets, etc. Never been a problem. These screens are incredibly scratch resistant.
I love these screen protectors that I bought on Amazon. Perfect on the first try with no bubbles! Check it out here: http://www.amazon.com/gp/aw/d/B004E49TEG/ref=mp_s_a_1?qid=1294786757&sr=8-1:
BoxWare screen protector is well IDK how to rate it as it is just regular. What I did not like about it was it does "NOT" fully cover the screen as you have little gap very small which bugs me as I am neat. The feeling right now is artificial as I can tell it is there maybe cuz its still new as I applied it just 2hours ago. So lets wait and see how it turns out in long run.
I grabbed a Reallook screen protector off of amazon:
Pros: The feel and clarity are great
Cons: The cut. It has a cutout for the FFC and leaves a fair bit of space on all sides (as a result it's easy to get on) but it's really short on all sides in my opinion.
Part Four said:
What do you need a screen protector for? I haven't used a screen protector since I bought the G1 at launch, and I've never had a screen scratch. Keys in my pockets, etc. Never been a problem. These screens are incredibly scratch resistant.
Click to expand...
Click to collapse
Tell that to the scratch in my screen that I got the first day of having the phone... yeah, needless to say, I have a screen protector now and its helped a lot.
Sent from my HTC Glacier using XDA App
any tips or tricks to putting the screen protectors on without getting bubbles or dust and lint sticking to adhesive side of protector?
If and when you place your screen protector and notice a finger print or lint, you can repair it. I use clear packing tape, cutting two strips about 1/2" wide. Place one on the top near (but not over) the area you are working with. This is used to lift the protector so you can get under it to where the problem is. Then slip the second strip under the protector, facing up or down depending if the problem it on the protector or the glass. I do it one way then the other for good measure. Once the tape is in place, lower the protector, press on the area, raise the protector, remove the piece of tape under the protector, then lower the protector to see if the blemish is gone.
Repeat where needed. Remove the piece of tape on the top by holding the protector beside the tape, and pulling the tape off the top.
This will remove fingerprints underneath the protector whether it is on the protector or the glass. It will also remove dust, fibers, etc.
It is entirely possible to place the screen protector where it is straight and without anything caught underneath, but I have used this method many times.
If you would like to see the process, search Youtube for "removing lint from under screen protectors".
I'm lazy -- I took mine to BestBuy and had them do it. It cost around $12, but they did the job right. I always seem to screw up when putting them on myself.
there is no need to "protect" the screen
http://www.youtube.com/watch?v=ivxlsNLi-9s
only good if protector is fingerprint resistant
danij3l said:
there is no need to "protect" the screen
http://www.youtube.com/watch?v=ivxlsNLi-9s
only good if protector is fingerprint resistant
Click to expand...
Click to collapse
I agree, it makes no sense to use a screen protector on something that has Gorilla Glass like the KF does, other than fingerprints or possibly a privacy screen protector.
I purchased the Skinomi from Amazon. It did not really help with fingerprints like I had planned, nor did it look very good on the screen - contrary to the Skinomi I have on my iPhone 4...
My fire got a light scratch on it in about a week. Never dropped, lived in its case, babied.
Get a screen protector.
(I am anal and hate even the smallest defect. It was indeed a small scratch only noticeable in certain light, but was a scratch.)
brett10 said:
I agree, it makes no sense to use a screen protector on something that has Gorilla Glass like the KF does, other than fingerprints or possibly a privacy screen protector.
Click to expand...
Click to collapse
I disagree. I have Gorilla Glass on my Samsung Epic 4g which survived the same type of 'demonstrations' showed in that video. Not wanting to impact the beauty of the screen (touted as one of its primary features when the phone came out), I left mine unprotected. However, after less than a year of use, there are still a significant number of scratches on it, and even one 'chunk' missing that is visible from all angles.
Came here to see if anyone recommended a specific brand over another. While the anti-glare screens sound nice, I have also read that it impacts viewing in a negative way - sounds like something I don't want for a device designed for reading. Therefore I figured I'd stick with a clear protector, but was looking for reviews.
I've always loved and used the SGP Steinheil Ultra Crystal.
[I'll add link later]
The anti-fingerprint ones they sell are junk. They really muck up the screen. But the ultra-crystals are great and provide another layer of protection. I haven't installed mine on my Fire yet, but I will once I get around to it.
Though Gorilla Glass is amazing stuff, it is not scratch-proof. I'll continue using screen protectors regardless of what type of glass.
Interesting. I have a 2 year old Incredible with a perfect screen and never used a screen protector. I must be the most careful person on earth.
.46caliber said:
The anti-fingerprint ones they sell are junk. They really muck up the screen.
Click to expand...
Click to collapse
Agree and disagree. While it does hinder the quality a tiny tiny bit, I personally love the feel of the matte surface while reading a book. That, combined with anti-glare, make the clear protectors utterly useless to me. If I'm reading / watching anything, I certainly don't want to have to tilt the device to get rid of glare to see the screen clearly.
I bought the Acase matte screen protectors and absolutely recommend them to anyone. 3 pack for $12.99 shipped on Amazon. (Girlfriend loves them too)
I have an XO Skin on my Nexus and love the look of it. You really can barely tell its there and it helps a ton with the finger prints. They make one for the Fire as well: http://xoskins.com/amazon-kindle-fire-screen-protector
Be aware that this is a wet applied protector. I find the best way to apply them is the steam up the bathroom really well for a few minutes, then turn the water off for a few minutes to let any dust in the room settle. Then do a really good wipe down of the screen with a non lint towel and blow it completely clean with compressed air.
When applying the protector, use a lot of the application liquid, on the protector and your fingers.
I just installed a Skinomi protector. Still waiting for it to dry and all, but as far as I can see I removed pretty much all of the bubbles. It was around 9 bucks shipped, came well packaged with clear instructions and a lifetime warranty. As long as it the picture quality isn't disturbed, I think it's going to be a winner.
I do want to try one of those matte protectors now though...
After dealing with cheap screen protectors I ordered a couple different well reviewed protectors.
I got the armorsuit militaryshield.
It installed great, but had to apply it wet (which i don't like) and let sit for 12 hours.
It turned out very nice, you really couldn't tell it was there besides very minor screen distortion. I really didn't like how it felt, a little sticky.
I had to rma that kindle and couldn't save the shield.
So I got a greatshield ezseal
If you're looking for a protector this is the one to get.
Best protector Ive ever used.
Its basically just like the moshi ivisor for ipad.
It doesn't stick to the screen, the adhesive is on the outer edges and it basically lies on the screen -so no bubbles. you can even take it off and wash it.
I tried the Acase matte screen protectors on Amazon and they looked awful. They mute the color palette and give everything a fuzzy look. Tried the Acase clear screen protectors instead and they worked out fine. Can't see the fingerprints and the screen still looks good.
yeah matte will make it a bit fuzzy/greasy looking
the ezshield is matte
Got this:
http://www.amazon.com/gp/product/B000ALDUFG/ref=oh_o00_s00_i00_details
BoxWave Amazon Kindle Fire ClearTouch Anti-Glare Screen Protector
I really like how it fits, it really make the display look better.
Don't really care about scratches, but the reflections on the KF can be pretty annoying outside.
It's not really anti-Fingerprint but it's way more easy to clean.
It's also reusable.
I thk a screen protector is ideal if your banging it around or throwing stuff of it but other than theres no reason to really.
ive only had i protector on 1 one the phones ive had, all the rest of the stuff I dont have any SP on them.
I have never had any prob with the screen getting scratched.
---------- Post added at 02:20 PM ---------- Previous post was at 02:18 PM ----------
If I could find something that would let me see the screen in the sun now that would be worth it. LOL
Is it making the screen use better outside then? And what about the use inside?
Sent from my MIUI.us Sensation 4G using XDA App
I'd definitely speak against screen protectors; I purchased a highly rated myGear one with my Fire and noticed that though fingerprints didn't seem to appear as easily, they were almost impossible to wipe off completely. It also noticeably detracts from what is such a good screen.
Hi everyone. I searched the forums for screen protectors, and what I found was a whole lot of threads on various screen protectors out there, but nothing centralizing these discussions. So I thought I'd create this thread.
1. What type of screen protector do you use?
2. How has it held up?
3. Have you gone without a screen protector?
4. If so, do you have any scratches?
5. What's the most you have paid for one?
6. What's the cheapest you have paid for one?
7. Any Rants? Any Raves?
8. Any you would recommend?
9. Any you would want to try?
10. Any tips to putting certain ones on?
Let's help each other out by sharing our knowledge on screen protectors for the HTC One.
Top screen protectors according to you guys.
1. Mime Feather Glass Screen Protector - $27.95 http://mimeusa.com/product/htc-one-feather-glass-tempered-glass-screen-protector/
2. Zagg Clear HD Screen - $19.99 http://www.zagg.com/invisibleshield/htc-one-cases-screen-protectors-covers-skins-shields
3. Verizon 3 Pack Anti-scratch Protectors - $12.99 http://www.verizonwireless.com/acce...-protectors-3-pack-w-screen-wipe-for-htc-one/
Installation videos
1. Android Authority demonstrating how to install wet and dry screen protectors such as the Zagg and ScreenWear http://youtu.be/sf0a-c7WH8U
2. Danny Winget demonstrating how to install a glass screen protector such as the Spigen Glass http://youtu.be/F4_wtcmWVv4
Reviews via Amazon
1. Zagg HD http://www.amazon.com/ZAGG-HDHTCM7S...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
2. Zagg Original http://www.amazon.com/ZAGG-HTCM7S-i...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
3. Mime Ghost Glass http://www.amazon.com/MIME-Tempered...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
4. AmFilm http://www.amazon.com/Protector-Inv...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
5. Tech Armor http://www.amazon.com/Tech-Armor-De...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
6. Skinomi http://www.amazon.com/Skinomi-TechS...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
Drop Test
1. Zagg Shield drop test http://youtu.be/NxcUMZ4bTCM
2. Tempered Glass drop test http://youtu.be/33T1Qun7jsQ
Zagg HTC One High Def Screen Protector - Amazon
I think Zagg makes the best screen protectors, I have used them on both the HTC Droid Incredible and the HTC One. The Zagg screen protectors are not the cheapest option for screen protectors especially if you go for the ultra clear model but I think the cost is worth it, especially since zagg offers warranty replacements, you only pay for shipping. With the warranty replacements, registering your product on the Zagg website is quick and easy, there are no serial numbers you need to have or anything, you only need to tell them what device you got it for and which model screen protector you got.
Another benefit of the zagg shields is the lifetime of the screen protector, in my experience the screen protectors lasted almost 2 years for my Droid Incredible before I replaced it, the screen protector started to come off around the edges of my phone. While the screen protectors do age, I would much prefer the aged screen protector opposed to any damage to my screen. In my entire life of my Droid Incredible, bought in April 2010 and still used as an e-reader by my girlfriend today, there is not one scratch on the screen thanks to the Zagg shield.
While I have not personally tried the Verizon 3 pack of screen protectors, I have had friends use them and they were disappointed with the quality of them, the biggest issue was having the screen protector stay on.
Zagg screen protectors have done such a great job in my opinion I have not wanted or even thought of trying another brand.
As for tips to putting the Zagg brand on, make sure you wash your hands before you do anything, clean the screen so their is no oil, fingerprints, dust or anything else on the phone, make sure the spray gets on both the screen protector and the screen but do not soak either, just enough spray to cover the phone and protector. I found it best when applying the screen protector to start at the top of the screen in one of the corners and work your way to the opposite top corner then work your way down, make sure to use the applying tool they put in the packaging, be sure to use a good amount of force when use the tool but be careful not to apply too much pressure and crack the screen.
If you do not want to try putting the screen protector on yourself, you can go to the Cell Phone employees at Best Buy and have them put the screen protector on. You do not need to purchase the protector from Best Buy, but they charge you a fee to do it. The major benefit of this is that if they screw up and ruin your protector they will replace it.
I tried the Verizon 3-pack when initially purchasing the one. While they are decent, I knew I wanted something a little more rugged.
I did some research and ended up settling on the Mime USA Feather lite tempered glass screen protector. It's super thin and flexes nicely when unboxed, so it's highly unlikely to actually shatter like other tempered glass protectors. It's extremely scratch resistent. I tested car keys, nails, and knives on the screen protector after applying it to the phone and absolutely no marks showed up. It fits perfectly to the parameters of the screen and is hardly noticable after application. I would highly recommend this product. I ordered it from the Mime USA website for about $28, they even threw in a code for free shipping!
Sent from my HTC6500LVW using xda app-developers app
I usually don't use screen protectors and whenever I put on a case, I take it off an hour later. I've had the phone for like 9 months now and the screen is fine. There are tiny little scratches but you can't notice them unless you try really hard to, they don't affect the clarity of the screen in any way. I just don't like using screen protectors because they attract finger prints and smudges so easily even when I try a more expensinve screen protector. Honestly the screen will be fine for a long time. Yes there will be extremely tiny scratches but you won't care because they're almost non-existant. But one thing to keep in mind though, is that sand is crazy harsh on the screens, so I'm extra careful when I go to the beach with my phone. That's when I suggest putting on a case and a screen protector. Because even if a tiny bit of sand getes in your pocket, it might cause a little damage. Right now my phone is brand new since I got it replaced because of a camera issue, and I just can't get myself to stick with putting on a case or screen protector, I had a screen protector on it but I took it off 2 weeks later because I miss the naked screen.
Spitfire91726 said:
I did some research and ended up settling on the Mime USA Feather lite tempered glass screen protector. It's super thin and flexes nicely when unboxed, so it's highly unlikely to actually shatter like other tempered glass protectors. It's extremely scratch resistent.
Click to expand...
Click to collapse
Reviews go with what you said. I think when I buy my next screen protector when my zagg wears down, I'm going to try one of these.
i'm using an invisible shield screen protector. Went on pretty easy, there were no bubbles, and it's pretty thick. I've only had it on for a week, so I can't say much about durability, but it's pretty good as far as a screen protector goes. I'm still very partial to those matte finish screen protectors, so i'll probably be picking up one of those in the future.
BygSii said:
Reviews go with what you said. I think when I buy my next screen protector when my zagg wears down, I'm going to try one of these.
Click to expand...
Click to collapse
Got a MIME Feather myself about a month ago or so now, and I must say that it's the best choice I've ever made as far as screen protection. I'd had a Spigen and some other tempered glass brand, but they were both just too thick and noticeable on the screen. The Feather is perfect because it's hard to even tell it's on there, plus it has the Oleophobic coating to prevent smudges and fingerprints. Seriously, don't even waste your money on another screen protector. You can't beat the MIME Feather.
tyler.durden said:
Got a MIME Feather myself about a month ago or so now, and I must say that it's the best choice I've ever made as far as screen protection. I'd had a Spigen and some other tempered glass brand, but they were both just too thick and noticeable on the screen. The Feather is perfect because it's hard to even tell it's on there, plus it has the Oleophobic coating to prevent smudges and fingerprints. Seriously, don't even waste your money on another screen protector. You can't beat the MIME Feather.
Click to expand...
Click to collapse
+1 what he said, minus the experience with Spigen. The MIME Feather is the first glass screen protector I've tried, and I don't think I'll ever use anything else. It's superb and well worth the premium price. With that on the screen and a Ballistic Shell Gel case on the rest of the phone, I don't worry about it too much.
I got a EBay $6.99, Chinese made, 0.4mm thick tempered glass screen protector a few weeks ago.
Went on really well, no bubbles and sticking down along all edges and corners. Has the beveled edges on the glass so no sharp edges.
Far better than ANY plastic one i have used on any phone. Touchscreen works well with it on.
Actually hard to notice now its on unless you run your finger from the speaker onto the screen , so the REALLY thin ones must be pretty close to invisible.
I polish up the screen every 2-3 days. Does get prints on it, so maybe the expensive ones have a better oleophobic coating??
For the price, most excellent.
astmacca said:
I got a EBay $6.99, Chinese made, 0.4mm thick tempered glass screen protector a few weeks ago.
Went on really well, no bubbles and sticking down along all edges and corners. Has the beveled edges on the glass so no sharp edges.
Far better than ANY plastic one i have used on any phone. Touchscreen works well with it on.
Actually hard to notice now its on unless you run your finger from the speaker onto the screen , so the REALLY thin ones must be pretty close to invisible.
I polish up the screen every 2-3 days. Does get prints on it, so maybe the expensive ones have a better oleophobic coating??
For the price, most excellent.
Click to expand...
Click to collapse
so it's basically putting another layer of glass on top of your screen? Like putting a slide cover on a microscope slide? I wonder if that'll make screen touching a little imprecise (or any more than having a screen protector.
xzyragon said:
so it's basically putting another layer of glass on top of your screen? Like putting a slide cover on a microscope slide? I wonder if that'll make screen touching a little imprecise (or any more than having a screen protector.
Click to expand...
Click to collapse
Its definitely putting another layer of glass on the screen. You have to be careful and get it in the right position 1st time as they dont move around once stuck down. Removing them without breaking is, i suspect, very difficult. The "tape hinge" method of application works pretty well.
I have found the touch sensitivity on mine to be great. Certainly there is no difference to the "usability" of the phone, and the smoothness an feel is as good as the original screen.
I did read one review where the buttons on screen wouldn't work with a glass screen protector, but that has certainly NOT been my experience. From what i have read the thickness of these has come down from around 0.6mm in early incarnations to something like 0.15mm and being flexible in some brands.
I got a 0.4mm one. No scratches as yet. Its supposed to be very hard (9H??). I had no issues with fitting my case on after installing the screen protector.. Its a cheap silicone and hardback model that provides good corner protection. Hopefully the screen protector will help if it falls on its face sometime.
What about Just Like Glass?
Has anyone tried it?
Didnt know protectors like the Mime feather existed. Will have to try it out.
Xeternall said:
Didnt know protectors like the Mime feather existed. Will have to try it out.
Click to expand...
Click to collapse
Just bought my first one a month ago (MIME Ghost), best screen protector I have ever used. It's definitely scratch resistant and feels like the original screen. Not sure how it will hold up to drops, but that's not something I am willing to test.
Had a friend buy some Write Guard screen protectors for his HTC One. I installed one on his HTC One. Screen protector was all ready getting all kinds of scratches in it. No Bueno.
I used the XtremeGuard screen protector for a very long time on my HTC One, but recently I decided I wanted a matte finish screen protector, so I switched to Tech Armor Anti-Glare. Feels much nicer to me and gets a lot less fingerprints and smudges.
I was using the protector that came with the UG case. After reading this thread, I picked up a MIME. Very impressed. It goes on dry, was easy to remove and reposition and left absolutly no bubles (these drive me CRAZY). It has somewhat finger print resistant and I did not heave to deal with wetting the protector, then waiting 24 hours to see if all the bubles went away. Best screen protector I have purchased and believe me, I have tried at least 20 different types over the years.
I have had no issues with the touch sensitivity. You can't even notice it's on unless you look really closely at the top edge.
Using the screen protector that came with my otterbox comuter and it is quite terrible.
The screen protector has been on since April and it is already deteriorating. The spots where I'd swype, type show heavy signs of use. With a faint finger swipe over the screen you can actually feel the difference.
Other than that, the actual performance isn't the worst. Glare and all in the sun is bad, indoors though I don't have any issues.
Will look into MIME.
Cheers,
Hi, I want to share my experience with skinomi techskin screen protectors.
Skinomi screen protectors are wet application screen protectors.
They are supposed to hold advantages such as:
Better Light Penetration
UV protection
Tough Skin for anti scratch
Anti yellowing
Self healing
No Orange Peel
Application
They are not simple to apply at all. Easy to align but hard to have no dust underneath. You have to spray the screen protector with the application liquid. And then put over the phone screen. But in doing so, you cannot see the small specks of dust that is trapped under the screen protector until you have completely applied it. This is because the screen protector has many microbubbles underneath it and seeing dust and removing them is very difficult. If you use your fingers to reapply then what tends to happen is that more dust goes in. This is because the dust sticks to wet surfaces easier than dry surfaces.
Furthermore, you are not really supposed to touch your device for half a day until after application to allow for micro bubbles to disappear. So you can't really tell you messed up until later. When reapplication can result in stretched skin.
Micro-Bubbles
They do disappear after 48hrs. They are generally not a problem. Sometimes if you reapply too many times, the micro bubbles do not disappear. They didn't disappear after the 3rd reapplication when i simply gave up.
Post Application/ Results
My sample had vertical rainbow streaks on it. This is what looks like single pixel lines that run vertically for about 5mm to 10mm. They are scattered across the screen and is very annoying when you are viewing a white background. I was told they were supposed to go away but they never did. Not even after 4days. They agreed to give me a second copy after i emailed them pictures of the faulty product. They sent me a new one free of charge with shipping paid for. But this also had the same problem even though I applied it more perfectly.
Again Also they both had a bad orange peel problem that make the screen protector have a uneven pattern on it. This problem does not fix itself and will not go away after 3 days. This could be the cause of the skin also feeling very grippy, which is not a feeling that i enjoy.
Customer Service
Very good. They responded to the emails within 2 days. They agreed to work out my problem and send me a replacement.
Overall/ Was it worth it
Oh Hell No! Both had defects. They cost 7pounds on amazon uk. Although you get replacements for life you do have to send them your previous product meanings shipping fees. I didn't but that wasn't the conventional protocol as stated on their website. I got some 1pound for 6 cheapo screen protectors that did the job much better (more clear, no orange peel, no dust, easy to apply, more slip) than the expensive skinomi.
I would not recommend this product.
I would recommend you get yourself some cheap $2 for 6 screen protectors to hold you out until you get yourself some china tempered glass screen protectors. Those are nice.
I highly recommend this screen protector. I'm sorry for your bad experiences =(
Sent from my Nexus 5 using Tapatalk
Agree with geminiworld8
I just checked Gearmaxx Ultra screen protector. Really it's a good one.
...my naked N5 slipped from my cold, numb fingers and landed flat but face down on a NYC sidewalk a couple days ago. At first it looked like a "soft landing" but no such luck and now I'm looking at a screen replacement (screen itself OK, but glass cracked all to hell).
So now I'm wondering if this could have been prevented simply by a case and not necessarily a screen protector as well. I've used cases such as an Otterbox Commuter in the past but never dropped any of those phones to the extent this one went down. It seems to me that any case with a slight lip on the front -- as most of them must have -- would be enough since the screen itself would not hit the ground.
From research on this forum and web sites I'm currently favoring the Spigen Thin Armor case but am wondering if a high-quality screen protector would also be worth it. My screen at the time it was damaged really had no scratches at all, so the Gorilla Glass was doing its job. Would one of those tempered glass protectors also provide shatter protection? Or would a decent case by itself be sufficient?
FWIW, I've used thin-film protectors in the past but always found them annoying due to bubbles, making the screen less readable, and/or affecting the touch response.
Even with a case on, if there was a small rock or a jagged edge on the ground that nicks the screen, it would have still been toast anyway. This is regardless of if there was a lip protecting it or not. It all depends on what's on the ground by chance.
A tempered glass protector probably could have saved the screen though, since you said it landed flat on its face. Tempered glass protectors are perfect for impacts that land face down, not so much on edges or sides. You will see most demonstrations of tempered glass done with nails, hammers, drop tests, etc. with the phone being impacted directly on the face. If it impacts from the side, there is a good chance the screen could still break as tempered glass isn't really designed to protect from those types of impacts.
That is where the case with a lip comes in. Those are meant to protect from side and edge impacts. Most drops generally don't land flat like yours, they tend to bounce around on corners first, so the case would absorb most of the impact and not the phone directly.
Your best bet is to both have a tempered glass screen protector (for flat impacts), and a bumper frame or TPU case (for the rest).
I use a Nillkin H+ Tempered Glass screen protector and a bumper frame (back not covered as I put a skin on the back) and I'm pretty much covered for most brain lapse moments.
rochrunner said:
FWIW, I've used thin-film protectors in the past but always found them annoying due to bubbles, making the screen less readable, and/or affecting the touch response.
Click to expand...
Click to collapse
Once you learn the hinge method for putting on screen protectors, you won't have air bubbles or dust underneath. You can't even tell my phone has a screen protector on it. Youtube has several videos on how to do it properly.
I refuse to pay big $$$ for glass protectors because you only get one of them, and you either do it right, or throw it away. With plastic protectors, you get several for a few dollars.
wolfen69 said:
I refuse to pay big $$$ for glass protectors because you only get one of them, and you either do it right, or throw it away. With plastic protectors, you get several for a few dollars.
Click to expand...
Click to collapse
That's not true. I applied and removed my Nillkin more then 10 times during the application to get rid of the dust I missed trapped underneath because I suck at applying screen protectors. It reapplied the same every time. All you have to do is make sure you don't firmly press it down and you're fine. This is even after you see the adhesion process occur. It will still peel up. The adhesive takes a few hours to a day (depending on brand) to fully stick/cure.
If a person like me can apply one glass screen protector, anyone else will do it better. One is all you need.
Plastic will only give basic scratch protection and leave a greasy screen after a while. If it takes the same fall his did, the screen would still be done for.
mmmmBACON said:
I use a Nillkin H+ Tempered Glass screen protector and a bumper frame (back not covered as I put a skin on the back) and I'm pretty much covered for most brain lapse moments.
Click to expand...
Click to collapse
What bumper frame do you use? I've been looking for one myself for a while now...
Cases protect the actual body of the phone, and maybe the screen if it happens to land flat. But if a rock of some other elevated object hits the screen then it will be done for. And a plastic screen protector will do nothing, that protects against scratches like from sand. A glass one would be the best bet for shatter protection. I've seen a person take a hammer to a screen with a glass screen protector on. The protector was rekt but the phone screen was fine.
Awesomepie85 said:
What bumper frame do you use? I've been looking for one myself for a while now...
Cases protect the actual body of the phone, and maybe the screen if it happens to land flat. But if a rock of some other elevated object hits the screen then it will be done for. And a plastic screen protector will do nothing, that protects against scratches like from sand. A glass one would be the best bet for shatter protection. I've seen a person take a hammer to a screen with a glass screen protector on. The protector was rekt but the phone screen was fine.
Click to expand...
Click to collapse
There are 2 that I would probably recommend. I'm currently using a transparent bumper case off of ebay. I did a review here http://forum.xda-developers.com/google-nexus-5/accessories/lucency-transparent-bumper-case-review-t2690108. It is $2.88 shipped. If you do choose this one, I would stick to black. After using them for a while now, the various colours tend to stain easily, but the black doesn't. It is just for light drop protection, but since the main body is a harder plastic, it won't absorb a higher drop like a softer bumper frame, or a TPU case would. I personally like it because it is transparent and you can still see the sides of the phone and the skin through it.
The other is the replica Nexus 4 bumper, for the Nexus 5. Mine is still in the mail so I haven't tried it out yet, but others have bought it and it seems to have gotten pretty good reviews overall. http://forum.xda-developers.com/google-nexus-5/accessories/replica-official-nexus-4-bumper-nexus-5-t2698422. It's a little bit pricier at $12.99 off Amazon, or around $8 - $10 off Aliexpress.
rochrunner said:
...my naked N5 slipped from my cold, numb fingers and landed flat but face down on a NYC sidewalk a couple days ago. At first it looked like a "soft landing" but no such luck and now I'm looking at a screen replacement (screen itself OK, but glass cracked all to hell).
So now I'm wondering if this could have been prevented simply by a case and not necessarily a screen protector as well. I've used cases such as an Otterbox Commuter in the past but never dropped any of those phones to the extent this one went down. It seems to me that any case with a slight lip on the front -- as most of them must have -- would be enough since the screen itself would not hit the ground.
From research on this forum and web sites I'm currently favoring the Spigen Thin Armor case but am wondering if a high-quality screen protector would also be worth it. My screen at the time it was damaged really had no scratches at all, so the Gorilla Glass was doing its job. Would one of those tempered glass protectors also provide shatter protection? Or would a decent case by itself be sufficient?
FWIW, I've used thin-film protectors in the past but always found them annoying due to bubbles, making the screen less readable, and/or affecting the touch response.
Click to expand...
Click to collapse
There are many choices for thicker protection cases. Properly applied screen protectors don't have any bubbles.
Sent from my Nexus 5 using Tapatalk
Hey! There's a kickstarter project for someone: A case with airbags that deploy when the phone finds itself in free-fall .
Claghorn said:
Hey! There's a kickstarter project for someone: A case with airbags that deploy when the phone finds itself in free-fall .
Click to expand...
Click to collapse
Those sly people at Honda have already done it.
Claghorn said:
Hey! There's a kickstarter project for someone: A case with airbags that deploy when the phone finds itself in free-fall .
Click to expand...
Click to collapse
I don't think I'd feel comfortable having that in my side pocket close to my family jewels or especially not in my back pocket.
BCSC said:
Those sly people at Honda have already done it.
Click to expand...
Click to collapse
Sent from my Nexus 5 using Tapatalk