So what do people recommend as the best screen protectors to choose from for the MT4G?
I know everyone has their own opinions on them, but I'm hoping people can post their pros/cons and we can help us all narrow down the choice to a few.
Thanks!
the phantom skinz screen protector! pros: clear, nice feel, covers the whole front. cons: none if installed correctly.
I like the Reallook one. Clear, durable and feels like the glass.
I had the realook and phantom skinz. I settled on phantom skinz. I have the full body matte, plus clear phantom skinz. (Don't install the matte screen protector from PS).
Realook is very good with clear BUT the only thing that sucks is that you get ALOT of oils/fingerprints, etc on it. Easy install and easy clean with soap/water.
Phantom skinz gets oil on the screen too, but not as much. Screen surface is alittle "gummy". (Orange peel is very little to non existant). Watch out as the adhesive backing will attract lint (during installation) and you WILL not be able to get that off. PS also has lifetime warranty = unlimited screen protector replacements. (got the whole kit for $12 during 50% off cyber monday).
Don't bother getting invisible shield, they suck and give you orange peel, and it's thick.
@Jaylito,
Did you notice any kind of cloudiness after you cleaned your screen with alchol/towel? (assuming you've cleaned your screen with alcohol/water) For some reason, mine clouded up on the top.
yeah I have. I guess it's normal tho. goes away if u keep rubbing the screen back & fourth with ur thumb. guess since the material... if it gets wet, it'll cloud a bit cause the moisture seeps thru the inside but it'll dry out bro.
guess I have to do more rubbing then cause it's still cloudy...
oh well....
I tried PhantomSkinz and that was a pain to put on (w/ water and soap), Realook was easy and it didn't peel at the edges.
Zagg Invisishield. Lifetime Warranty.
realook, hands down.
pros: crystal clear, feels like the glass itself, easy to clean, easy to apply, easy to reapply.
cons: a little expensive ($10 for 2, but its totally worth it)
MT4G_Slave said:
I tried PhantomSkinz and that was a pain to put on (w/ water and soap), Realook was easy and it didn't peel at the edges.
Click to expand...
Click to collapse
Weird... for me, PS was MUCH EASIER than realook.
PS allows movement up/down/left/right with ease, and then you just squeeze out water.
For realook, it sucked to align the edges cause you can't move the film once you've "stickered" it on. Then you have to peel it back off and realign, causing lint (in my case) to adhere, and then I have to clean it again.
For me the realook was the best by far. I tried a couple of the wet app kind like invisishield and clear freak on the 4 mt4gs that I had and the realook was the best. I agree its a pain to put on, especially if you have animals because of dust and hair, but if you apply it in the bathroom after letting it steam up from the shower, I've found I can get it on without too much dust or hair falling on the screen. Also, get some extra scotch tape and place it on the front of the realook screen to keep your fingers off the adhesive side while applying it. Another nice thing is that each protector comes with two dots to apply to the camera lens in the back.
The only bad thing is that I think the realook attracts fingerprint grease worse than the wet app kind.
I have a zagg on my nexus s mostly because its all that's out right now and will put a realook on as soon as they are available.
Sent from my Nexus S using XDA App
The Boxwave screen protectores look pretty good too, though I've never tried one myself.
Ghost Armor. Just added it today on my 4G n its cut to fit perfectly, including the sensors n camera. FEELS like the real glass n doesn't take away from the display like the ones Tmo sales. Avoid those *****es like the plague.
I used Zagg for my Nexus S.
I get generic ones from a guy named lcd-protectors on ebay, 5 for $3.50. They're the stiff kind with two protective layers that you peel off, one before you apply and one after. I'm too cheap to pay more.
i just ordered a full body cover kit from stealthguards.com
choosing the clear type and none of the colored ones, it was $2.85 (full body protection, just pay shipping)
$2.85 sure beats dishing out $25 for zagg which is the same crap.
What do you need a screen protector for? I haven't used a screen protector since I bought the G1 at launch, and I've never had a screen scratch. Keys in my pockets, etc. Never been a problem. These screens are incredibly scratch resistant.
I love these screen protectors that I bought on Amazon. Perfect on the first try with no bubbles! Check it out here: http://www.amazon.com/gp/aw/d/B004E49TEG/ref=mp_s_a_1?qid=1294786757&sr=8-1:
BoxWare screen protector is well IDK how to rate it as it is just regular. What I did not like about it was it does "NOT" fully cover the screen as you have little gap very small which bugs me as I am neat. The feeling right now is artificial as I can tell it is there maybe cuz its still new as I applied it just 2hours ago. So lets wait and see how it turns out in long run.
I grabbed a Reallook screen protector off of amazon:
Pros: The feel and clarity are great
Cons: The cut. It has a cutout for the FFC and leaves a fair bit of space on all sides (as a result it's easy to get on) but it's really short on all sides in my opinion.
Part Four said:
What do you need a screen protector for? I haven't used a screen protector since I bought the G1 at launch, and I've never had a screen scratch. Keys in my pockets, etc. Never been a problem. These screens are incredibly scratch resistant.
Click to expand...
Click to collapse
Tell that to the scratch in my screen that I got the first day of having the phone... yeah, needless to say, I have a screen protector now and its helped a lot.
Sent from my HTC Glacier using XDA App
Related
I looking for the best screen protect for my capy
Sent from my SAMSUNG-SGH-I897 using XDA App
Took three tries and a slight trim of the long edge, but 3 ANTI GLARE Screen LCD for Samsung Captivate Galaxy S off ebay gave me what I want: a bubble free matte screen installation. item #380262378182.
Thanks I going to order from ebay
You don't NEED a screen protector.
The Samsung Galaxy S has Gorilla Glass from Corning.
Check a torture test here (on a Dell Streak, which I also have - but it has the same glass) and tell me if you really need a lousy plastic sheet on your beautiful screen.
Check out the gorilla glass website. The got a pictireo of a gorilla with its arse up in the air kissing a pane of glass LOLS
Sent from my SAMSUNG-SGH-I897 using XDA App
FWIW, My phone hangs out in my pocket all day, every day, with keys and loose change etc. I have zero scratches on the glass and the naked glass feels much better than any screen protector IMHO.
Don't get yourself all worked up over choosing the "right" screen protector. Just buy the 3 pack from at&t and call it good
Sent from my SAMSUNG-SGH-I897 using XDA App
Steinheil protectors are fantastic -- only ones I've found that don't leave smudges and fingerprints all over. (They do dull the screen a bit, but since the amoled screen is too bright to begin with, that's not a problem IMO.)
ninjuh said:
Don't get yourself all worked up over choosing the "right" screen protector. Just buy the 3 pack from at&t and call it good
+1
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I897 using XDA App
itsjustaphone said:
FWIW, My phone hangs out in my pocket all day, every day, with keys and loose change etc. I have zero scratches on the glass and the naked glass feels much better than any screen protector IMHO.
Click to expand...
Click to collapse
Look at it in the sun at an angle so it reflects the sun off the screen, you will see lots of micro scratches. This is on both our captivates. Sure, they're not "SCRATCHES" like the usually unsightly ones, they are just micro, or super thin.
Just because it can handle an impact doesn't mean it's scratch resistant. Personally have used the Phantom Skinz protector in the past and am currently using the Realook protector now. If you like the slight rubbery feel of the "skinz" type of protector you have plenty of options. I used the Phantom Skinz because it seemed to have the least orange peel look. After exchanging my captivate for another one (I had the random shut down issue) I used the Realooks static style screen protector. I prefer this one since it's almost nake glass feeling and I can totally say it can take a decent scratch. I got a nice dent from a fall off my desk onto a barbell that dented my chasis and also nicked the screen protector but no scratches. Best thing is you get 2 so if one gets farked you still have a spare. Best screen protector is one you will use and be happy with.
It still scratches even with the Gorilla Glass. Not big scratches, but they are visible at certain angles - it may or may not bother you.
I've used two types, SGP and Realook. Both are highly regarded, and from my experience SGP doesn't have any rainbow effect like Realook, but Realook has a much more natural feel. Both are excellent.
i took off my screen protector a couple months ago and i sometimes regret it. theres a few scratches on the screen but you cant really see them unless you hold the phone at a specific angle in the light. it doesnt really bother me that much. it is kind of annoying having to clean the fingerprints though.
I have invisishield its great only paid twenty for it with a lifetime warranty you I've had mine for about 4 months and it has yet to get a scratch and I even took a knife and scraped it across the screen surely no scratches but in the end I guess it is all up preference
Sent from my Samsung captivate running 2.3b4
Dont mean to hi jack the thread but is there a way to clean a screen protector? I was installing mine and it slipped out of my hand. I have tried using scotch tape to the debris off of it but I cant get all of it. Any ideas????
Invisishield
I've had the Invisishield on my phone since late August. I just recently had to exchange that under warranty and the Invisishield removed easily and installed easily on the new phone, no air pockets at all. Still looks like the day I bought it.
jfuq20 said:
I have invisishield its great only paid twenty for it with a lifetime warranty you I've had mine for about 4 months and it has yet to get a scratch and I even took a knife and scraped it across the screen surely no scratches but in the end I guess it is all up preference
Sent from my Samsung captivate running 2.3b4
Click to expand...
Click to collapse
possible one of the WORST things to put on a phone's screen. Especially a touch screen phone with one of the best glass and screens.
The invisishield and all others LIKE IT offer nothing but horrible viewing and use. The cover often resists your fingers movements, your fingers often drag on it and the smoothness of glass is all gone and replaced by a crappy rubbery and not to mention GRAINY protector.
Surprisingly, the only thing close to being clear, and smooth is the cheap stuff on ebay. I've used them and they offer great protection and are cheap enough to change out every month. I no longer use one.
for what its worth I got the BodyGuardz protectors when they were on thanks giving sale.
It does not feel like the glass, given, but i almost feel like i like that it gives just a little resistance to my touch. it does have the slightest orange peel effect but you can only see it if its off and at an angle.
Its not perfect, but I like it especially since I have a bit of OCD and it would drive me crazy if i got the smallest scratch on the screen. This gives me piece of mind.
ccdoggy said:
for what its worth I got the BodyGuardz protectors when they were on thanks giving sale.
It does not feel like the glass, given, but i almost feel like i like that it gives just a little resistance to my touch. it does have the slightest orange peel effect but you can only see it if its off and at an angle.
Its not perfect, but I like it especially since I have a bit of OCD and it would drive me crazy if i got the smallest scratch on the screen. This gives me piece of mind.
Click to expand...
Click to collapse
http://cgi.ebay.com/3pcs-Clear-LCD-...218142?pt=PDA_Accessories&hash=item5add8f621e
you're better of with these. They're clear and dont have the resistance you feel with other rubbery protectors. I'd use the ebays ones before anything else, especially if you are OCD.
At $1.57 for 3, you can change it every month if you want, but I've had good luck with them in the past.
I got gadgetshieldz they cost around $6 for full body protection. Worked for me, they are quite nice easy to install and quite good in performance. A word of caution though the it took 20 days for it to get to me in Canada.
Sent from my SAMSUNG-SGH-I897 using XDA App
Full Body Kits:
TOP PICK - SGP (Extremely Thin, Glossy, or Matte, $26 per kit) - Recommended by 3 people
Best Skins Ever ($9 per kit) - Recommended by 3 people
Skinomi ($20 per kit) - Recommended by 1 person
Phantom Skinz (Glossy or Matte, 2 kits for $25) - Recommended by 1 person
Use code "spring20" to get 20% off at phantomskinz.com - Thanks for the tip beazie0885
Ghost Armor ($25 per kit) - Recommended by 1 person
Xtreme Guard ($5 per kit) - Recommended by 1 person
BodyGuardz (Regular or "Dry Apply", 2 kits for $25) - Can anyone recommend BodyGuardz? (Generally Neutral offsite)
ZAGG InvisibleSHIELD (Maximum Coverage and Easy Install, $25 per kit) - Not Recommended by 3 people
Screen Protector Only:
SGP Screen Protectors($14-$16 per kit, Crystal, Fine, and Oleophobic) - Recommended by 1 person
EMPIRE Screen Protector (~$5 for one protector) - Recommended by 1 person
Reviews:
SGP Review by Supish
Well its a dry apply screen protector so it is a little by harder to apply than wet applications. However, it is very smooth, almost no resistance and comparable to the naked screen (almost). Absolutely no yellowing as well and still no scratches so far. Good angle visability and not more of a lint/oil magnet than the naked screen. The one I got was advertised as ultra oleophobic meaning it resists oils, I guess it works.
SGP Oleophobic Screen Protector Review by cheetah2k
I've just received the SGP Oleophobic screen protector. It took me a whole 2 minutes to install and is totally bubble free. You get 2 protectors in each packet, plus bubble removal card, cleaning cloth and 4 dust removal stickers.
Definitely the most complete screen protector on the market.
And it works!!! Awesome i give it 10/10
Skinomi Review by djkinetic:
i use the skinomi screen protectors and they are great in my experience, at the time i ordered it it was the only one available, it is a wet apply, put it on align it, and let it dry and its nearly invisible no bubbles, the material is polyurethane, and supposedly has a uv coating to prevent yellowing, it feels smooth when using the touch screen even tho the texture seems rubbery, its weird cuz u can definately tell its a different texture but ur finger still glides over the touch screen like nothin is there. Only downside is that if u knick the protector it doesnt self repair, for example if u press hard on the film with a fingernail it will leave an imprint that doesnt go away. However they do offer lifetime replacements, overall id recommend it.
Ghost Armor Review by cegna09
Used them on my Aria, and now my Atrix. They are awesome if only for the warranty alone. Great coverage of the phone, great protection, awesome at hiding finger grease on the screen. And if you ever need it replaced they send a new one no questions asked, just mail the old one back to them. Had it on my Aria for 6 months without problems, then switched phones.
EMPIRE Screen Protector Review by vin791
bought the empire screen protector from amazon for $4 (free 2 day shipping w/ amazon student) and it rocks. there's a ~.5mm border on the sides and ~1mm border on the top, doesn't both me though and its super clear. i got it perfectly aligned on the 2nd lay down with no bubbles or dust (make sure you wipe it down really good with the cloth they send). its easier when you start from the top of the phone instead of the bottom. i oull the whole sticky side protector off, align the top and kind of guide it straight towards the bottom. the card they send removes any bubbles that are there at first. no worries. as long as you cleaned the surface well and theres no dust, you shouldn't have bubbles when you're done. great and inexpensive product (compared to competitors)
InvisibleSHIELD Maximum Coverage Review by kmiller8:
Immediately after I applied the skin, I could tell instantly I would love it, mainly because of the texture/feel of the plastic "skin" applied to the phone. It added a nice rubbery feel to it while at the same time not making it any harder (maybe even a little easier) to use the OSK and Swype. You can see in the album on pics 2 and 5 where I had a bit of trouble applying, but those could have been easily avoided, had I taken just a few more minutes to make the skin more even throughout the phone. However the edges of the cover are a HUGE lint magnet especially in pockets but I think (hope) that this is just because it was recently applied. Also, it still fits perfectly in the Standard and Car Dock In the pictures it appears as if there are little bubbles throughout the skin, this is not visible under normal lighting, but the flash of the camera seems to have over exaggerated it.
EDIT: After a few weeks with the protector, I ended up removing the part covering the glass, The atrix just looks SOOO much better without a skin protector on the front, but I did keep the ones on the side and back because it adds a much needed grip to the back of the phone.
Fin
I hope this helps someone decide whether or not to get one of these skins, and personally I like the fact that it appears as if it is just the bare phone, but there is a nice layer of protection throughout the phone, however others will equally enjoy a nice OtterBox Defender or Incipio Feather case (two previous options).
If anyone has any questions feel free to ask, or if you have any suggestions to be added to the first post (kit recommendations, personal reviews) reply below!
I've used invisibleshield on other phones and the lint at the edges problem only got worse...
nomisunrider said:
I've used invisibleshield on other phones and the lint at the edges problem only got worse...
Click to expand...
Click to collapse
do you know of any ways to reduce the lint problem? i was thinking of trying to do something along the edges to remove some of the adhesive
Man, i like invisibleshield but i HATE the yellowing that is guaranteed to happen, and even the peeling of the corners that happens VERY often. makes me rage
Yellowing, corner adhesion, edge lint, and texture = no way Invisibleshield is going on my phone. I used it on my Fuze and it was awful.
Is there any other kind of "full body" clear protector that is better?
Phantomskinz.com is the best imo
No joke. And I think its cheaper too
Sent from my MB860 using XDA App
beazie0885 said:
Phantomskinz.com is the best imo
No joke. And I think its cheaper too
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Whats the texture of the phantomskin? like is it smooth like the regular phone or more "rubbery" like the Zagg shields.
Also, they're the same price $25 before shipping, but i do like how phantomskinz has a matte version avialable
EDIT: nevermind, apparently you get two kits for $25. i might just try out a set.
EDIT 2: heavily modified first part of first post to provide links to both Zagg and Phantom Skinz. and other places
Didn't see the Best Skins Ever shield on here. I used their product on my iPhone and its held up good.
Here's the link for their Atrix product http://www.bestskinsever.com/motorola-atrix-4g-skin
Sent from my iPhone using Tapatalk
i have the best skins ever full body on my atrix and i love it. the pieces are cut perfectly and install fairly easily. i love that it adds some much needed grip to an otherwise super slippery device
projekt1 said:
Didn't see the Best Skins Ever shield on here. I used their product on my iPhone and its held up good.
Here's the link for their Atrix product http://www.bestskinsever.com/motorola-atrix-4g-skin
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
hondaguy said:
i have the best skins ever full body on my atrix and i love it. the pieces are cut perfectly and install fairly easily. i love that it adds some much needed grip to an otherwise super slippery device
Click to expand...
Click to collapse
Added to first post.
Looking at total body skin photos on their website.
Does the body cover wrap around and prevent one from pulling the back cover off?
Sort of looks like it does...
i use the skinomi screen protectors and they are great in my experience, at the time i ordered it it was the only one available, it is a wet apply, put it on align it, and let it dry and its nearly invisible no bubbles, the material is polyurethane, and supposedly has a uv coating to prevent yellowing, it feels smooth when using the touch screen even tho the texture seems rubbery, its weird cuz u can definately tell its a different texture but ur finger still glides over the touch screen like nothin is there. Only downside is that if u knick the protector it doesnt self repair, for example if u press hard on the film with a fingernail it will leave an imprint that doesnt go away. However they do offer lifetime replacements, overall id recommend it.
kmiller8 said:
Whats the texture of the phantomskin? like is it smooth like the regular phone or more "rubbery" like the Zagg shields.
Also, they're the same price $25 before shipping, but i do like how phantomskinz has a matte version avialable
EDIT: nevermind, apparently you get two kits for $25. i might just try out a...
Click to expand...
Click to collapse
Its like glass on the screen, ive only used the chromatics on the back of my cappy, but I prefer a tpu case anyways. I did like the chromatics though.
Sent from my MB860 using XDA App
djkinetic said:
i use the skinomi screen protectors and they are great in my experience, at the time i ordered it it was the only one available, it is a wet apply, put it on align it, and let it dry and its nearly invisible no bubbles, the material is polyurethane, and supposedly has a uv coating to prevent yellowing, it feels smooth when using the touch screen even tho the texture seems rubbery, its weird cuz u can definately tell its a different texture but ur finger still glides over the touch screen like nothin is there. Only downside is that if u knick the protector it doesnt self repair, for example if u press hard on the film with a fingernail it will leave an imprint that doesnt go away. However they do offer lifetime replacements, overall id recommend it.
Click to expand...
Click to collapse
Yea I have the skinomi screen protector on the atrix as well, and the first day I nicked it with my fingertip and its still there. Also my buddy tried to use the hard end of a capacitive stylus on it and messed it all up... I just ordered a protector from phantom skinz because I only had one on my captivate the whole time Ive had it (since launch) and it still looks brand new. Feels just like skinomi but repairs itself, and you get two for $9.99...
Edit: Use code "spring20" to get 20% off at phantomskinz.com
Sent from my MB860 using XDA App
djkinetic said:
i use the skinomi screen protectors and they are great in my experience, at the time i ordered it it was the only one available, it is a wet apply, put it on align it, and let it dry and its nearly invisible no bubbles, the material is polyurethane, and supposedly has a uv coating to prevent yellowing, it feels smooth when using the touch screen even tho the texture seems rubbery, its weird cuz u can definately tell its a different texture but ur finger still glides over the touch screen like nothin is there. Only downside is that if u knick the protector it doesnt self repair, for example if u press hard on the film with a fingernail it will leave an imprint that doesnt go away. However they do offer lifetime replacements, overall id recommend it.
Click to expand...
Click to collapse
beazie0885 said:
Edit: Use code "spring20" to get 20% off at phantomskinz.com
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Thank you both for you contributions to the thread, both added to first post!
Get a sgp steinheil screen protector. Now that's a screen protector you can't tell that's on
Sent from my MB860 using XDA Premium App
Supish said:
Get a sgp steinheil screen protector. Now that's a screen protector you can't tell that's on
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
Can you elaboate? Like yellowing? Lint magnent? Angle viewability? Scratch resistant etc etc.
So from this thread and other similar to it:
I should go with either Best skin ever or Phantom Skinz. Question for those that are using the Phantom Skin, did you get the clear or matt finish? What's the difference?
-Roze- said:
Can you elaboate? Like yellowing? Lint magnent? Angle viewability? Scratch resistant etc etc.
So from this thread and other similar to it:
I should go with either Best skin ever or Phantom Skinz. Question for those that are using the Phantom Skin, did you get the clear or matt finish? What's the difference?
Click to expand...
Click to collapse
Well its a dry apply screen protector so it is a little by harder to apply than wet applications. However, it is very smooth, almost no resistance and comparable to the naked screen (almost). Absolutely no yellowing as well and still no scratches so far. Good angle visability and not more of a lint/oil magnet than the naked screen. The one I got was advertised as ultra oleophobic meaning it resists oils, I guess it works.
Sent from my MB860 using XDA Premium App
Supish said:
Well its a dry apply screen protector so it is a little by harder to apply than wet applications. However, it is very smooth, almost no resistance and comparable to the naked screen (almost). Absolutely no yellowing as well and still no scratches so far. Good angle visability and not more of a lint/oil magnet than the naked screen. The one I got was advertised as ultra oleophobic meaning it resists oils, I guess it works.
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
Updated first post with your review. Thank you for that.
I was going to try a Phantom Skinz, but ended up sticking with no screen protector whatsoever
Anyone is using Exim screen protector on I9100? Is it perfect fit? Is it a fingerprint magnet? Can anyone share some photo after having it on?
No one using Exim screen protector???
I an using the exim screen protectors. Got them off ebay, shipped from HK. It took 2+ weeks to get them.
I would consider them a perfect fit. They are a tad undersized, but I prefer that; it makes for an easier install.
Exim quality, very scratch resistant, but average when it comes to finger prints. They wipe off easily.
I will take a picture later on and post it.
Sent from my GT-I9100 using XDA Premium App
Pinkthesink said:
I an using the exim screen protectors. Got them off ebay, shipped from HK. It took 2+ weeks to get them.
I would consider them a perfect fit. They are a tad undersized, but I prefer that; it makes for an easier install.
Exim quality, very scratch resistant, but average when it comes to finger prints. They wipe off easily.
I will take a picture later on and post it.
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Hi,
Thanks for your reply. How do you rate the installation process. Is it tough to install? How about the process of getting the bubble out? Is there any bubble after the installation? It would be great if you could post so picture. Well I feel that as long as fingerprint and oil stain is easily wipe of, this is consider good.
I found installation to be easy, as it's undersized a tad. If you have ever put screen protectors on, this one is no different. peel off a little of the top while folding down the protective layer and line up the top portion. once you have the top lined up and stuck on pull the rest of the films cover off and let it lay down.
If you didn't get the alignment right, get some clear magic tape, apply a little section to the bottom of the screen protector, lift up while holding the top of the protector in place with your thumb and pivot in place.
If you get any dust in between the protector and screen, apply some tape near the area, lift up and with your other hand stick a piece of fresh tape under the screen protector to grab the dust.
On another note, if you have ever applied a invisible skin like zagg, bodyguardz, or skinomi: you can use the same technique of spraying the protector aligning in place and pushing the fluid out with a squeegee.
I'll look for a good video to show what I'm talking about and post it below.
Sent from my Inspire 4G using XDA Premium App
Hi,
I know how the Zagg shield work. Thanks for the pictures. The screen protector look pretty decent and well fitted. May I know the type of Exim screen protector you have. Does it look as if there is no protector on screen? Thanks.
You can't tell it is on at all, crystal clear.
Sent from my Inspire 4G using XDA Premium App
I am using the Exim protector and agree it is pretty good. It is clear but I wouldn't say it's invisible as you can tell from the photos. I am waiting for the Martin Fields ones to be available.
Sent from my GT-I9100 using XDA App
Pinkthesink & PeteRyde , may I know which Exim are you using. Screen Protector Ultra Clear (SPUC)), Screen Protector Ultro Protection (SPUP) or Screen Protector Original Clear (SPOC))
I just checked, it is SPOC. I also received the steinheil ultra oleophobic protector in the mail yesterday from exportprive.com. It is very nice.
Sent from my GT-I9100 using XDA Premium App
Pinkthesink said:
I just checked, it is SPOC. I also received the steinheil ultra oleophobic protector in the mail yesterday from exportprive.com. It is very nice.
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Hmm. That explain why it not that clear. SPUC would be a better choice.
hostet said:
Hmm. That explain why it not that clear. SPUC would be a better choice.
Click to expand...
Click to collapse
I have just ordered a pack of Exim screen protectors SPUC for my SGS2 directly from Exim online store.
It's gonna be shipped to me in 7-21 business days apparently.
jeanclaudevandamme said:
I have just ordered a pack of Exim screen protectors SPUC for my SGS2 directly from Exim online store.
It's gonna be shipped to me in 7-21 business days apparently.
Click to expand...
Click to collapse
Hi,
Do keep us updated of the quality and cutting. Thanks.
hostet said:
Pinkthesink & PeteRyde , may I know which Exim are you using. Screen Protector Ultra Clear (SPUC)), Screen Protector Ultro Protection (SPUP) or Screen Protector Original Clear (SPOC))
Click to expand...
Click to collapse
I'm using SPUC.
PeteRyde said:
I'm using SPUC.
Click to expand...
Click to collapse
How is the quality?
It is pretty good and very clear. Fingerprints are easy to wipe off which is good as it does accumulate them easily. The only thing I don't like about it is the cut. It is as per the picture where the home key is cut to the button and the speaker/camera cut to the top.
Sent from my GT-I9100 using XDA App
Been using the EXiM SPUC protectors on all of my phones since my TouchPro and have found them to be very clear but they are prone to fingerprints. I'd personally prefer fingerprints rather than permanent scratches.
On this phone they fit fairly well. The cut outs are well placed and don't obstruct any of the sensors at the top, but they are a little small around the edges (good if you use one of those TPU style cases because the case will be less likely to push on the edges of the protector).
Not much else I can comment on. They fit, they are clear and they are cheap while remaining high quality.
Hi PeteRyde & zehro,
Thanks for the review on the screen protector. I do agree the cutting is not as great as the rest. But most importantly, it is hard enough to resist scratch and is clear. Further to that, the pricing is pretty competitive.
hostet said:
Hi,
Do keep us updated of the quality and cutting. Thanks.
Click to expand...
Click to collapse
Experiment over. Costly, and I wish I never indulged in it.
Disclaimer: The Exim SPUC would likely be pretty good if the installation went more perfectly than Mary's inception of Jesus H Christ. It felt very smooth, did not scratch or oil at the slightest touch and was extremely clear picture quality wise.
One thing that's wrong with it is that some air bubbles dont' come out, they don't even move, they stay there and become a splodge.
What you really need is about 10 of these in a pack, because if they don't install more perfectly than the inception of Jesus H Christ on your first try, you need to bin them and move on.
Basically my 1st try ended up with lots of air bubbles and some dust/lint underneath beacuse i initially got the positioning wrong, so i lifted it up to realign it, getting more dust in the process.
So I move onto my 2nd try with the second protector in the pack. This time, I get alignment correctly first time. Unfortunately there were still air bubbles and there was a speck of dust where the screen was. The airbubbles wouldn't come out and ended up in sploges, trying to remove that speck of dust ended in more dust on the screen.
So now both protectors were boned. Then I decided to test Exim on it's word that it's protectors are washable, so I blast the silicon side under my tap to get rid of all dust. It did get rid of all dust/lint.
So I try reapplying it wet with just tap water, well it does apply, but the water won't come out properly and leaves skidmarks underneath, even with a squidgee (I have a spare Zagg Invisible shield one).
No good, so I wash it under tap again, then I first of all dry and clean my phone screen with microfibre cloth, then blast it with an air compressor to blast out and dry any escaped water in the bit where the screen joins the side, because I didn't want moisture into phone electronics.
This time I try an "proper" wet solution, I actually have a bottle of that Zagg Invisible shield spray, so I use that and try to reapply the Exim SPUC. It works better than water, but I was becoming increasingly frazzled and another bit of dust got underneath the screen, so I decided to blast screen with air compressor, big mistake, solution streak everywhere. So I take off the Exim protector to wipe excess liquid
I then found the Invisible Shield spray is utterly crap and the whole Zagg thing is just a rip off because the spray solution made a film on my screen, like it was obviously. The I madly scrub with microfibre cloth to get rid of it, thank **** it went.
In a moment of despair, I touch my SGS2 screen with my bare fingers, it was wrong, but felt so right. Like grabbing the fine ass of a lapdancer, something that you're suppposed to look, but not touch.
Then having totally wrecked my new Exim Screen Protectors which costed me $11 or £8. I go back to the 10 pack £1.99 protectors I got of eBay, they're cheap and slutty like the whore of Babylon, but at least they're readily disposable.
I tried and fail to apply 3 more cheap screen pretectors because of dust/link/air bubbles, bin them all and on 4th go, succeed. Experiment over.
jeanclaudevandamme said:
Experiment over. Costly, and I wish I never indulged in it.
Disclaimer: The Exim SPUC would likely be pretty good if the installation went more perfectly than Mary's inception of Jesus H Christ. It felt very smooth, did not scratch or oil at the slightest touch and was extremely clear picture quality wise.
One thing that's wrong with it is that some air bubbles dont' come out, they don't even move, they stay there and become a splodge.
What you really need is about 10 of these in a pack, because if they don't install more perfectly than the inception of Jesus H Christ on your first try, you need to bin them and move on.
Basically my 1st try ended up with lots of air bubbles and some dust/lint underneath beacuse i initially got the positioning wrong, so i lifted it up to realign it, getting more dust in the process.
So I move onto my 2nd try with the second protector in the pack. This time, I get alignment correctly first time. Unfortunately there were still air bubbles and there was a speck of dust where the screen was. The airbubbles wouldn't come out and ended up in sploges, trying to remove that speck of dust ended in more dust on the screen.
So now both protectors were boned. Then I decided to test Exim on it's word that it's protectors are washable, so I blast the silicon side under my tap to get rid of all dust. It did get rid of all dust/lint.
So I try reapplying it wet with just tap water, well it does apply, but the water won't come out properly and leaves skidmarks underneath, even with a squidgee (I have a spare Zagg Invisible shield one).
No good, so I wash it under tap again, then I first of all dry and clean my phone screen with microfibre cloth, then blast it with an air compressor to blast out and dry any escaped water in the bit where the screen joins the side, because I didn't want moisture into phone electronics.
This time I try an "proper" wet solution, I actually have a bottle of that Zagg Invisible shield spray, so I use that and try to reapply the Exim SPUC. It works better than water, but I was becoming increasingly frazzled and another bit of dust got underneath the screen, so I decided to blast screen with air compressor, big mistake, solution streak everywhere. So I take off the Exim protector to wipe excess liquid
I then found the Invisible Shield spray is utterly crap and the whole Zagg thing is just a rip off because the spray solution made a film on my screen, like it was obviously. The I madly scrub with microfibre cloth to get rid of it, thank **** it went.
In a moment of despair, I touch my SGS2 screen with my bare fingers, it was wrong, but felt so right. Like grabbing the fine ass of a lapdancer, something that you're suppposed to look, but not touch.
Then having totally wrecked my new Exim Screen Protectors which costed me $11 or £8. I go back to the 10 pack £1.99 protectors I got of eBay, they're cheap and slutty like the whore of Babylon, but at least they're readily disposable.
I tried and fail to apply 3 more cheap screen pretectors because of dust/link/air bubbles, bin them all and on 4th go, succeed. Experiment over.
Click to expand...
Click to collapse
What an experience you have. I guess it is due to the area you are in when applying the screen protector. It seems to me dust is all around you which is causing all this agony. You can try the suggestion as listed here. Look at post 1, 2, this and this video for the soap method. You may want to contact Exim and check if you can get a replacement. Anyway how many Exim protector you get in the order?
any tips or tricks to putting the screen protectors on without getting bubbles or dust and lint sticking to adhesive side of protector?
If and when you place your screen protector and notice a finger print or lint, you can repair it. I use clear packing tape, cutting two strips about 1/2" wide. Place one on the top near (but not over) the area you are working with. This is used to lift the protector so you can get under it to where the problem is. Then slip the second strip under the protector, facing up or down depending if the problem it on the protector or the glass. I do it one way then the other for good measure. Once the tape is in place, lower the protector, press on the area, raise the protector, remove the piece of tape under the protector, then lower the protector to see if the blemish is gone.
Repeat where needed. Remove the piece of tape on the top by holding the protector beside the tape, and pulling the tape off the top.
This will remove fingerprints underneath the protector whether it is on the protector or the glass. It will also remove dust, fibers, etc.
It is entirely possible to place the screen protector where it is straight and without anything caught underneath, but I have used this method many times.
If you would like to see the process, search Youtube for "removing lint from under screen protectors".
I'm lazy -- I took mine to BestBuy and had them do it. It cost around $12, but they did the job right. I always seem to screw up when putting them on myself.
there is no need to "protect" the screen
http://www.youtube.com/watch?v=ivxlsNLi-9s
only good if protector is fingerprint resistant
danij3l said:
there is no need to "protect" the screen
http://www.youtube.com/watch?v=ivxlsNLi-9s
only good if protector is fingerprint resistant
Click to expand...
Click to collapse
I agree, it makes no sense to use a screen protector on something that has Gorilla Glass like the KF does, other than fingerprints or possibly a privacy screen protector.
I purchased the Skinomi from Amazon. It did not really help with fingerprints like I had planned, nor did it look very good on the screen - contrary to the Skinomi I have on my iPhone 4...
My fire got a light scratch on it in about a week. Never dropped, lived in its case, babied.
Get a screen protector.
(I am anal and hate even the smallest defect. It was indeed a small scratch only noticeable in certain light, but was a scratch.)
brett10 said:
I agree, it makes no sense to use a screen protector on something that has Gorilla Glass like the KF does, other than fingerprints or possibly a privacy screen protector.
Click to expand...
Click to collapse
I disagree. I have Gorilla Glass on my Samsung Epic 4g which survived the same type of 'demonstrations' showed in that video. Not wanting to impact the beauty of the screen (touted as one of its primary features when the phone came out), I left mine unprotected. However, after less than a year of use, there are still a significant number of scratches on it, and even one 'chunk' missing that is visible from all angles.
Came here to see if anyone recommended a specific brand over another. While the anti-glare screens sound nice, I have also read that it impacts viewing in a negative way - sounds like something I don't want for a device designed for reading. Therefore I figured I'd stick with a clear protector, but was looking for reviews.
I've always loved and used the SGP Steinheil Ultra Crystal.
[I'll add link later]
The anti-fingerprint ones they sell are junk. They really muck up the screen. But the ultra-crystals are great and provide another layer of protection. I haven't installed mine on my Fire yet, but I will once I get around to it.
Though Gorilla Glass is amazing stuff, it is not scratch-proof. I'll continue using screen protectors regardless of what type of glass.
Interesting. I have a 2 year old Incredible with a perfect screen and never used a screen protector. I must be the most careful person on earth.
.46caliber said:
The anti-fingerprint ones they sell are junk. They really muck up the screen.
Click to expand...
Click to collapse
Agree and disagree. While it does hinder the quality a tiny tiny bit, I personally love the feel of the matte surface while reading a book. That, combined with anti-glare, make the clear protectors utterly useless to me. If I'm reading / watching anything, I certainly don't want to have to tilt the device to get rid of glare to see the screen clearly.
I bought the Acase matte screen protectors and absolutely recommend them to anyone. 3 pack for $12.99 shipped on Amazon. (Girlfriend loves them too)
I have an XO Skin on my Nexus and love the look of it. You really can barely tell its there and it helps a ton with the finger prints. They make one for the Fire as well: http://xoskins.com/amazon-kindle-fire-screen-protector
Be aware that this is a wet applied protector. I find the best way to apply them is the steam up the bathroom really well for a few minutes, then turn the water off for a few minutes to let any dust in the room settle. Then do a really good wipe down of the screen with a non lint towel and blow it completely clean with compressed air.
When applying the protector, use a lot of the application liquid, on the protector and your fingers.
I just installed a Skinomi protector. Still waiting for it to dry and all, but as far as I can see I removed pretty much all of the bubbles. It was around 9 bucks shipped, came well packaged with clear instructions and a lifetime warranty. As long as it the picture quality isn't disturbed, I think it's going to be a winner.
I do want to try one of those matte protectors now though...
After dealing with cheap screen protectors I ordered a couple different well reviewed protectors.
I got the armorsuit militaryshield.
It installed great, but had to apply it wet (which i don't like) and let sit for 12 hours.
It turned out very nice, you really couldn't tell it was there besides very minor screen distortion. I really didn't like how it felt, a little sticky.
I had to rma that kindle and couldn't save the shield.
So I got a greatshield ezseal
If you're looking for a protector this is the one to get.
Best protector Ive ever used.
Its basically just like the moshi ivisor for ipad.
It doesn't stick to the screen, the adhesive is on the outer edges and it basically lies on the screen -so no bubbles. you can even take it off and wash it.
I tried the Acase matte screen protectors on Amazon and they looked awful. They mute the color palette and give everything a fuzzy look. Tried the Acase clear screen protectors instead and they worked out fine. Can't see the fingerprints and the screen still looks good.
yeah matte will make it a bit fuzzy/greasy looking
the ezshield is matte
Got this:
http://www.amazon.com/gp/product/B000ALDUFG/ref=oh_o00_s00_i00_details
BoxWave Amazon Kindle Fire ClearTouch Anti-Glare Screen Protector
I really like how it fits, it really make the display look better.
Don't really care about scratches, but the reflections on the KF can be pretty annoying outside.
It's not really anti-Fingerprint but it's way more easy to clean.
It's also reusable.
I thk a screen protector is ideal if your banging it around or throwing stuff of it but other than theres no reason to really.
ive only had i protector on 1 one the phones ive had, all the rest of the stuff I dont have any SP on them.
I have never had any prob with the screen getting scratched.
---------- Post added at 02:20 PM ---------- Previous post was at 02:18 PM ----------
If I could find something that would let me see the screen in the sun now that would be worth it. LOL
Is it making the screen use better outside then? And what about the use inside?
Sent from my MIUI.us Sensation 4G using XDA App
I'd definitely speak against screen protectors; I purchased a highly rated myGear one with my Fire and noticed that though fingerprints didn't seem to appear as easily, they were almost impossible to wipe off completely. It also noticeably detracts from what is such a good screen.
I just thought I should share a valuable lesson: DON'T BUY CHEAP SCREEN PROTECTORS!
I have been fine in the past with cheap screen protectors from eBay. They got the job done, and they were only a dollar or two. And you got six of them.
Anticipating the arrival of my N5, I bought a Spigen Neo-Hybrid case (Which is excellent), and some cheap screen protectors for $2. (12 to be exact)
http://www.ebay.com/itm/231089059032?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
I bought a bunch because that gives ample headroom if you mess up a few times.
I try to install the first one, and it ends up with bubbles near the cutouts for the speaker and camera. Okay, I'll just try another one.
I've gone through six of them, and they all have the same bubble problem near the cutouts.
I ended up buying higher-end screen protectors: http://www.amazon.com/gp/product/B00EV97UD6/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
I'll be sure to report on those when they arrive.
But the lesson is to be cautious with cheap screen protectors.
The xtremeguard screen protectors are really good, and they can be found for under $2.
mprasolov said:
I just thought I should share a valuable lesson: DON'T BUY CHEAP SCREEN PROTECTORS!
I have been fine in the past with cheap screen protectors from eBay. They got the job done, and they were only a dollar or two. And you got six of them.
Anticipating the arrival of my N5, I bought a Spigen Neo-Hybrid case (Which is excellent), and some cheap screen protectors for $2. (12 to be exact)
http://www.ebay.com/itm/231089059032?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
I bought a bunch because that gives ample headroom if you mess up a few times.
I try to install the first one, and it ends up with bubbles near the cutouts for the speaker and camera. Okay, I'll just try another one.
I've gone through six of them, and they all have the same bubble problem near the cutouts.
I ended up buying higher-end screen protectors: http://www.amazon.com/gp/product/B00EV97UD6/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
I'll be sure to report on those when they arrive.
But the lesson is to be cautious with cheap screen protectors.
Click to expand...
Click to collapse
I've got some of the iSmooth protectors and they are quite good...once I properly installed them. Dry apply are a little tricky but there are enough tutorials and videos to help. I also have the Neo Hybrid and I'm quite happy with it.
BigOkie said:
I've got some of the iSmooth protectors and they are quite good...once I properly installed them. Dry apply are a little tricky but there are enough tutorials and videos to help. I also have the Neo Hybrid and I'm quite happy with it.
Click to expand...
Click to collapse
I guess I lucked out with my choice of screen protector!
Not necessarily. I bought these SAMAR crystal clear screen protectors, managed to apply one without getting any dust or air bubbles. It has all the cutouts, the fit is good, and it is quite smooth when swiping, very happy with it so far. To top it all off it is dirt cheap and you get 6 protectors all with cleaning cloths! I've read others on here who have been happy with this brand too. Would definitely recommend.
use a drop of water when u install. it'll help take out bubbles.
also you can reapply these, just rinse in soap water then water, then shake off excess and apply. squeegee out the water - should be next to nothing.
ktamondo said:
The xtremeguard screen protectors are really good, and they can be found for under $2.
Click to expand...
Click to collapse
True. And even with that. I got one first and tested before I got backups.
I use an IQshield screen protector and it's nothing short of pure awesome. No bubbles at all, and it's so smooth and dried hard. It feels like glass.
You get what you pay for. I bought the spiegen Crystal for 10 bucks and they went on perfect and looked perfect and felt pretty good to you cant even tell its on unless you look at the earpiece closely. But there's always better! I just recently bought a Nillkin Glass screen protector with 9h hardness and olephobic with rounded edges and its gonna be getting here in a week or so and that should be way better than a cheap or high quality screen protector!
This sounds silly, but whenever I install a cheap screen protector, I do two things: first, i make sure the side that's going to be applied to the screen is FACE DOWN. Never face it up, under any circumstances. if I do, its before removing from packaging. I even remove the adhesive that protects the protector itself, with the screen protector face down. this doesn't give a chance for dust to sit on the bottom of the screen when facing up. Yes im sure any dust flying around will still find a way to stick, but this reduces the chances. Plus, you make sure you are applying in a clean environment anyway. I usually vaccum the house (or area at least) prior to applying, and give the dust time to settle afterwards.
second, and heres the silly part: I make sure the screen is completely wiped, and blow on the screen itself with DRY LIPS as im applying the screen protector face down. This blows off any dust that may settle between the time you apply the screen, and make sure lips are dry as to not blow moisture onto the screen.
There really isn't any fool proof method for applying screen protectors without dust, but without some sort of clean box with a built in HEPA filtration system, this seems to work well for me 80-90% of the time, versus just applying like normal.
unvaluablespace said:
This sounds silly, but whenever I install a cheap screen protector, I do two things: first, i make sure the side that's going to be applied to the screen is FACE DOWN. Never face it up, under any circumstances. if I do, its before removing from packaging. I even remove the adhesive that protects the protector itself, with the screen protector face down. this doesn't give a chance for dust to sit on the bottom of the screen when facing up. Yes im sure any dust flying around will still find a way to stick, but this reduces the chances. Plus, you make sure you are applying in a clean environment anyway. I usually vaccum the house (or area at least) prior to applying, and give the dust time to settle afterwards.
.
Click to expand...
Click to collapse
You can skip all the surgical-precision vacuuming if you do the application in the bathroom. Turn on the shower, hot as it'll go. Leave it run for 5-10 minutes til the bathroom is steamy. That knocks all the dust out of the air.
Then you can apply your screen protector in peace.
Caelrie said:
You can skip all the surgical-precision vacuuming if you do the application in the bathroom. Turn on the shower, hot as it'll go. Leave it run for 5-10 minutes til the bathroom is steamy. That knocks all the dust out of the air.
Then you can apply your screen protector in peace.
Click to expand...
Click to collapse
but wouldn't that cause moisture in the air? I could see that getting in between the screen during application. I bought a ton of screen protectors like OP though, so I'll have to give this idea a shot lol
The moisture will get out over time. Its just like having windows tinted
Sent from my Nexus 5 using Tapatalk
unvaluablespace said:
but wouldn't that cause moisture in the air? I could see that getting in between the screen during application. I bought a ton of screen protectors like OP though, so I'll have to give this idea a shot lol
Click to expand...
Click to collapse
It doesn't matter. Even dry-applied screen protectors go on better this way, and any moisture completely dries out quickly anyway.
Spend a few hundred dollars on a phone and then buy the cheapest cases and screen protectors you can? Doesn't make sense.
I'll pay the extra $8 for a Spigen screen protector and a quality case that match the quality of my Nexus.
Sent from my Nexus 5 using Tapatalk
Spigen could've tried a bit harder and made all the cutouts. Even the temporary screen protector that comes with the phone has those. I think most screen protectors will be similar at the $1+ range but you can't expect much from ones that cost $0.25.
xtremeguards didn't have bubbles for me. Buying 6 of the same screen protectors and then saying all of them have problems doesn't make sense.
I'm assuming the OP means the bubbles are from the edge of the cutouts not sticking down which is a common issue with cheap screen protectors.
the cutouts are not made well so the screen protector itself is warped at the cutouts for the speakers etc so its not flat and does not stick down creating bubbles there.
Just install in steamy bathroom. The steam prevents dust from floating in the air.
Sent from my Nexus 7 using XDA Premium HD app
I got this Nillkin one: http://dx.com/p/277084. I only had one. Applied by using the "hinge" method. Went perfectly. Cutouts are perfect and bubbles are removed very easy (easier than other screen protectors I've had).
I used a little wet cloth to make my screen wet and to remove dust. At first it feels very rubbery, but after using it for a day or even less, it feels just like the glass!