hi guys..
I flashed 4.2-THL-CWM-Touch-6.0.3.6-Baffin-Odin using ODin.
Rooted using UPDATE-SuperSU-v1.51
Later cleared cache and dalvik cache...
After this i flashed AdiFlyMIUI.zip from my sdcard also It got installed in 5-10sec is this correct ??
Again cleared cache and dalvik cache.
But after this when i restarted my phone..it just got stuck at "Samsung galaxy grand i9082" screen and rebooted again coming back o same boot screen..
can some one help me with it??
have you created a backup??
which was your previous rom 4.1 or 4.2
you stuck on a soft brick.. but it can be resolve.
restore your backup you have via recovery mode..
if you don't have a backup than you need to download stock firmware & need to be flash via odin..
you should be on 4.1 to flash miui based rom.
psuedodevil said:
have you created a backup??
which was your previous rom 4.1 or 4.2
Click to expand...
Click to collapse
yaa i have created backup using cwm..and also restored it back..
currently after restoring it its showing me android 4.2.2 version.
was you on 4.1 before flashing
psuedodevil said:
have you created a backup??
which was your previous rom 4.1 or 4.2
you stuck on a soft brick.. but it can be resolve.
restore your backup you have via recovery mode..
if you don't have a backup than you need to download stock firmware & need to be flash via odin..
you should be on 4.1 to flash miui based rom.
Click to expand...
Click to collapse
So now how should i downgrade to it??
wer can i get it??
Also should i go to 4.1 or 4.2.1 is ok??
you can get 4.1.2 stock firmware from sammobile.
or you can enjoy cm10.2 to flash over 4.2.2 stock
Related
I tried installing the tegraowners ics v144 rom for a500 and it stayed at the android boot up screen forever
1.I backed up and wiped all data
2.I flashed the rom
3.I restored the a100 boot.img
help!
WeegeePwn said:
I tried installing the tegraowners ics v144 rom for a500 and it stayed at the android boot up screen forever
1.I backed up and wiped all data
2.I flashed the rom
3.I restored the a100 boot.img
help!
Click to expand...
Click to collapse
That rom doesn't work on our device. Do a full restore in CWM.
oh
OK, then, thanks
Hi there!
Im having problems with returning to stock rom. Im flashing the latest firmware via ODIN and it goes into a boot loop. Tried two different versions and it doesn't starts at all. Flashing CWM again and a custom rom runs without problem. What should i try? And is there any possibility to flash the stock rom via CWM?
darky2106 said:
Hi there!
Im having problems with returning to stock rom. Im flashing the latest firmware via ODIN and it goes into a boot loop. Tried two different versions and it doesn't starts at all. Flashing CWM again and a custom rom runs without problem. What should i try? And is there any possibility to flash the stock rom via CWM?
Click to expand...
Click to collapse
before and also after flashing with odin you must do a wipe data or you will have bootloop
So you mean after i flash with odin the stock rom to do a data wipe? Wont this be a problem for the stock rom? One question out of the topic, facebook app and facebook messenger app are still supported in 2.3.6 right?
darky2106 said:
So you mean after i flash with odin the stock rom to do a data wipe? Wont this be a problem for the stock rom? One question out of the topic, facebook app and facebook messenger app are still supported in 2.3.6 right?
Click to expand...
Click to collapse
Format/Wipe Your System,Data,Cache First using clockworkmod. because you trying to rollback your android version 4.0 to 2.3.
darky2106 said:
So you mean after i flash with odin the stock rom to do a data wipe? Wont this be a problem for the stock rom? One question out of the topic, facebook app and facebook messenger app are still supported in 2.3.6 right?
Click to expand...
Click to collapse
i mean 1)wipe data and cache with cwm 2)odin 3)wipe data and cache
Thanks guys, all done! It all went well without clearing the data and cache after odin.
Hello, my name is Sebastian. First time I post here. I´ve been reading a lot here in Xda, but no posting before.
I have a little question for you all, experts, and I think its kinda simple but I can´t figure it out.
My N7100 was running fine with a stock rom (Android 4.1) and then flashed a custom rom, I think Phoenix Rom (Android 4.1) and working very fine too..
Now I wanted to flash a newer rom, and I've tried a lot, with no good results:
PHOENIX ROM V15 (ANDROID 4.3)
DR KETAN CUSTOM ROM V6.1 (ANDROID 4.3)
DN3 V3.1 (ANDROID 4.3)
HURRICANE V6.0 (ANDROID 4.3)
I can install them all very fine, but when I restart the phone, it get stuck at the Galaxy Note II N7100 logo.
My CWM is version 6.0.3.7 and I`m using Philz touch 5.15.0 (I've tried Philz touch 6 with the same results).
I tried installing a new radio with Odin, version DDUMJ9 Modem and still the same result, stuck at boot logo.
Its weird cause I can install very fine the custom rom PROBAM 5.0 (Android 4.3) and it don´t get stuck at the boot logo, and the system runs very fine. I also can install custom rom REVOLUTION HD 19.0 (Android 4.1 based).
So, my problem its with Android 4.3 and most of the custom roms based in that system that are holded here in Xda.
What can i do? What I'm doind wrong? What is missing?
I'll be very grateful for any help that you can give me.
Best regards.
you stuck at bootloader..what bootloader you use ?
try flash mj5 bootloader
sora9009 said:
you stuck at bootloader..what bootloader you use ?
try flash mj5 bootloader
Click to expand...
Click to collapse
Ok I will try that and post later...any link to download MJ5 bootloader?
Thank you
Ok I flashed MJ5 bootloader using joeldroid instructions (post found here in Xda) via Odin.
Then went to recovery, wipe cache, wipe full/factory reset and installed Phoenix ROM v15 and....still no luck, I'm stuck at the boot logo.
here its the post from joeldroid:
http:// forum. xda-developers .com/ showpost.php?p=46901976&postcount=741 (without spaces)
melankoly said:
Ok I flashed MJ5 bootloader using joeldroid instructions (post found here in Xda) via Odin.
Then went to recovery, wipe cache, wipe full/factory reset and installed Phoenix ROM v15 and....still no luck, I'm stuck at the boot logo.
here its the post from joeldroid:
http:// forum. xda-developers .com/ showpost.php?p=46901976&postcount=741 (without spaces)
Click to expand...
Click to collapse
Phoenix ROM V15 has some issues installing first time.. try complete wipe (keep installation zip on external SD card and format internal SD card in order to clean every thing) then try couple of times... alos select less apps and mods.. you can download app later..
I was on phoenix and gave me troubles installing but was able to in 2-3 attempts always...
ameyamg said:
Phoenix ROM V15 has some issues installing first time.. try complete wipe (keep installation zip on external SD card and format internal SD card in order to clean every thing) then try couple of times... alos select less apps and mods.. you can download app later..
I was on phoenix and gave me troubles installing but was able to in 2-3 attempts always...
Click to expand...
Click to collapse
Thanks a lot man, but I've tried to install Phoenix ROM like...7 times? And before every installation I do the following:
1. Wipe dalvik cache
2. Wipe cache
3. Wipe cache/full factory reset
4. Wipe and clean to install a new ROM (Philz touch option)
And then I perform the installation. Like I said in my first post this is happening to me with every Android 4.3 custom ROM, not just Phoenix ROM.
Do you have any other idea? Thanks in advance.
Best regards.
from what you said,you only do factory reset before install.
did you do factory reset after install ?
sora9009 said:
from what you said,you only do factory reset before install.
did you do factory reset after install ?
Click to expand...
Click to collapse
Yes I've done factory reset to every installation I've made, and I even done it more than one time several times.
I did a new test, I formatted the internal SD and did all the wipe steps and tried to install Dr Ketan ROM (android 4.3 based) with no luck.
After all the new tests I did, finally decided to go back to Android 4.1 and flashed Revolution HD 19.0 and now my phone is working flawlessly.
What is missing in my phone to be able to run Android 4.3? I've seen other people with the same problem, but none seems to give and straight answer.
Here's is an example of the same problem:
http:// forum.xda-developers.com / showthread.php?t=2556414
melankoly said:
Yes I've done factory reset to every installation I've made, and I even done it more than one time several times.
I did a new test, I formatted the internal SD and did all the wipe steps and tried to install Dr Ketan ROM (android 4.3 based) with no luck.
After all the new tests I did, finally decided to go back to Android 4.1 and flashed Revolution HD 19.0 and now my phone is working flawlessly.
What is missing in my phone to be able to run Android 4.3? I've seen other people with the same problem, but none seems to give and straight answer.
Here's is an example of the same problem:
http:// forum.xda-developers.com / showthread.php?t=2556414
Click to expand...
Click to collapse
hurmm..this is weird..
why don't you try mj5 leak stock rom..since mj5 leak is a stock rom..i don't think you will face any problem..
after done mj5 flashing, apply patch from here then flash custom rom.
if that also not working, i dunno what wrong with your phone.
sora9009 said:
hurmm..this is weird..
why don't you try mj5 leak stock rom..since mj5 leak is a stock rom..i don't think you will face any problem..
after done mj5 flashing, apply patch from here then flash custom rom.
if that also not working, i dunno what wrong with your phone.
Click to expand...
Click to collapse
Ok I will try that and I will comeback to post my results.
I will use this guide from Dr Ketan if anyone need the same as me:
http:// forum.xda-developers.com / showthread.php?t=2500823
Best regards
melankoly said:
Thanks a lot man, but I've tried to install Phoenix ROM like...7 times? And before every installation I do the following:
1. Wipe dalvik cache
2. Wipe cache
3. Wipe cache/full factory reset
4. Wipe and clean to install a new ROM (Philz touch option)
And then I perform the installation. Like I said in my first post this is happening to me with every Android 4.3 custom ROM, not just Phoenix ROM.
Do you have any other idea? Thanks in advance.
Best regards.
Click to expand...
Click to collapse
Have you tried zoot's script mega wipe ?
Android 4.3 I notice there's a change on the usb internal storage folder. If the MJ5 bootloader you have tried already, you can try this megawipe. It will wipe very clean your internal storage. Don't worry, it won't wipe your EFS
I always use this script everytime I want to jump to new Android base, and so far never give me a problem.
Good luck!
Sent from the corner of this rounded earth.
You must use a Super Wipe script before the factory reset when installing a 4.3 Rom for the first time.
sent from somewhere
Agree because they change the partitioning.
Sent from the corner of this rounded earth (N7105 v4.3, powered by LionROM)
You can Flash leaked 4.3 mi6 rom via pc odin and it will automatically wipe your all data and int storage. You still will have old boot loader. After that,you can try any 4.3 custom rom.
Sent from my GT-N7100 using Tapatalk
M nt able 2 flash GENNXT/Pyramidk3 rom over either stock rooted 4.2.2 or on Resurrection remix 4.4..
Actually i tried flashing both these roms, after upgrading to CWM 6.0.4.5(which was neccesity for cm11/rr 4.4)
On flashing these roms it says install from sdcard complete, n it takes just a sec. to flash both (one @ stancel) roms, n wen i reboot my phone it stucks @ galaxy grand logo
Plzz help me how can i flash one of these ROMs
darpan1041 said:
M nt able 2 flash GENNXT/Pyramidk3 rom over either stock rooted 4.2.2 or on Resurrection remix 4.4..
Actually i tried flashing both these roms, after upgrading to CWM 6.0.4.5(which was neccesity for cm11/rr 4.4)
On flashing these roms it says install from sdcard complete, n it takes just a sec. to flash both (one @ stancel) roms, n wen i reboot my phone it stucks @ galaxy grand logo
Plzz help me how can i flash one of these ROMs
Click to expand...
Click to collapse
You need to wipe data, cache and dalvik cache like all ROMs but also you need to go to Mounts and Storage > Format /system, then flash the ROM you want.
EDIT: Recovery is not the issue with any ROM, but the /system is not formatted in some of them and that can cause problems at times, so formatting /system will give you a much cleaner install. 6.0.4.5 should work for all 4.2.2 as well as 4.4 ROMs
darpan1041 said:
M nt able 2 flash GENNXT/Pyramidk3 rom over either stock rooted 4.2.2 or on Resurrection remix 4.4..
Actually i tried flashing both these roms, after upgrading to CWM 6.0.4.5(which was neccesity for cm11/rr 4.4)
On flashing these roms it says install from sdcard complete, n it takes just a sec. to flash both (one @ stancel) roms, n wen i reboot my phone it stucks @ galaxy grand logo
Plzz help me how can i flash one of these ROMs
Click to expand...
Click to collapse
install cwm 6.0.3.6 and rename pyramid to pyramid.zip and flash again
if u help you please hit thanks
iceyhotguy said:
You need to wipe data, cache and dalvik cache like all ROMs but also you need to go to Mounts and Storage > Format /system, then flash the ROM you want.
EDIT: Recovery is not the issue with any ROM, but the /system is not formatted in some of them and that can cause problems at times, so formatting /system will give you a much cleaner install. 6.0.4.5 should work for all 4.2.2 as well as 4.4 ROMs
Click to expand...
Click to collapse
I flashed it after complete wipe only..Factoryreset, cache, system, data, dalvik... Evrything though it didnk worked
darpan1041 said:
I flashed it after complete wipe only..Factoryreset, cache, system, data, dalvik... Evrything though it didnk worked
Click to expand...
Click to collapse
Then you might need to do a fresh 4.2.2 firmware install for the 4.2.2 bootloader before installing a custom ROM
iceyhotguy said:
Then you might need to do a fresh 4.2.2 firmware install for the 4.2.2 bootloader before installing a custom ROM
Click to expand...
Click to collapse
Come on.. Its totally nt acceptable.. I flash 4.4 ROMS over any firmware.. N d same compatibility i need for 4.2 custom ROM.. Dnt want such tediousness
darpan1041 said:
M nt able 2 flash GENNXT/Pyramidk3 rom over either stock rooted 4.2.2 or on Resurrection remix 4.4..
Actually i tried flashing both these roms, after upgrading to CWM 6.0.4.5(which was neccesity for cm11/rr 4.4)
On flashing these roms it says install from sdcard complete, n it takes just a sec. to flash both (one @ stancel) roms, n wen i reboot my phone it stucks @ galaxy grand logo
Plzz help me how can i flash one of these ROMs
Click to expand...
Click to collapse
Do this
1) Copy the file to the root of your internal storage.
2) Rename it pyramid.zip
3) FLASH
Sent from my GT-I9082 using Tapatalk
I use Samsung Grand I-9082. I don't know much about android's workings and followed a youtube video to root my phone. I was then on 4.2.2 and then out of curiosity upgraded to Cyanogenmod 10.1. It was fine so when Cyanogenmod 11 came out i flashed it too using the same CWM recovery. Since about a month ago my phone is becoming unresponsive sometimes especially at lock screen and occasionally it reboots by itself while i'm in the middle of something.
Is there any way i can go back to android 4.2 from CM 11? I should also mention here that i don't want to unroot, just downgrade to a stable rom that my phone will be able to adequately function with, without causing any trouble.
So suggest some good stable roms with dual sim capability. I'm considering gennxt custom rom.
I'm not much technology literate, so kindly give me instructions for the procedure. Thanks in advance.
You can flash any stock custom rom
Or restore your stock rom backup through cmw recovery If you have
osas514 said:
You can flash any stock custom rom
Or restore your stock rom backup through cmw recovery If you have
Click to expand...
Click to collapse
I read that for flashing gennxt rom i must have a 4.2.2 base. Can i just flash it from 4.4.3 that i have now?
ramachandram said:
I read that for flashing gennxt rom i must have a 4.2.2 base. Can i just flash it from 4.4.3 that i have now?
Click to expand...
Click to collapse
Yes you can
Wipe cache partition
Wipe data
Flash gennxt
Wipe cache partition and dalvik cache after installation
I'm gonna do it now.
osas514 said:
Yes you can
Wipe cache partition
Wipe data
Flash gennxt
Wipe cache partition and dalvik cache after installation
Click to expand...
Click to collapse
I'll come back if there's any problem and to click the thanks if it works fine.