Develop Bugs

[Q] Update to JB

I tried updated to JB from Viper 2.7.1 by attempting to go back to stock using RUU_ENDEAVOR_U_ICS_40_TMO_UK_1.28.110.7_R2_Radio_1.1204.103.14_release 256500_signed.exe & it didnt go to plan.
After I relocked the bootloader I couldnt get any further with the process & my phones battery ran flat, I had to use the battery script to get enough power back into the phone so I could continue, again It wouldnt work, at first I thought my phone had been bricked but when I re-unlocked the bootloader Viper came back to life.
What is the best way to go about updating to JB?
My CID T-MOB005
HBoot 0.94
Radio 1.1204.103.14

Are you sure you got the right version number ?
Do the fastboot command
Fastboot getvar version-main
If it matches this ruu
http://androidfiles.org/ruu/securek...Radio_1.1204.105.14_release_260731_signed.exe
Then you can use it. The 1.28 ruu fails because it wants to downgrade the hboot. Hboot 0.94 is in line with the 1.29 version number. So my guess is that when you use this one you will succeed !

after using fastboot getvar version-main I got 1.28.110.7

Hmm funny .... Download the ruu i linked
Keep the bootloader locked ... And keep the phone in the bootloader and select the ruu.exe by clicking with the right mouse button ...select RUN AS ADMINISTRATOR

C:\x>fastboot getvar version-main
version-main: 1.26.401.2
finished. total time: 0.034s
C:\x>fastboot oem readcid
...
(bootloader) DEBUG: cid: HTC__102
OKAY [ 0.014s]
finished. total time: 0.014s
which ruu should i pick?
hboot 0.43

5had said:
C:\x>fastboot getvar version-main
version-main: 1.26.401.2
finished. total time: 0.034s
C:\x>fastboot oem readcid
...
(bootloader) DEBUG: cid: HTC__102
OKAY [ 0.014s]
finished. total time: 0.014s
which ruu should i pick?
hboot 0.43
Click to expand...
Click to collapse
Sent you PM !

thanks Mr Hofs
does the .exe need to be in a specific folder when run? i.e. platform-tools
is the file OTA_ENDEAVOR_U_ICS_40_TMO_UK_1.28.110.7-1.26.110.5_release256527.zip for updating stock ROMS?
it will probably be Saturday before I can make another attempt, I will let you know how I get on

No afaik you don't need to run it rom a specific place. But running it from within the fastboot can't do any harm

just an update to this thread
ran RUU_ENDEAVOR_U_ICS_40_TMO_UK_1.29.110.11_Radio_1.1204.105.14_release_260731_signed.exe successfully.
performed OTA updates from TMobile culminating in JB :laugh:
finally installed ViperX 3.3.7 & all OK until I restored apps in Titanium, now Sense crashes randomly, I must have restored an old version of Sense by mistake.
Thanks for your help MrHofs

Nice ! :thumbup:
Or did you restore some of the old system ? Either way at least the updates worked fine

it looks like Ive restored something I shoudnt have!
I would recommend the RUU route to updating to JB every time, nice n simple

Unless the ruu is not available !

htc desire (bravo) stuck on htc logoo..

hi,,,
my htc desire stuck in htc logoo , is s off and i try to flash with ruu.exe( RUU_Bravo_HTC_Europe_1.15.405.3_Radio_32.30.00.28U _4.05.00.11_release_121865 )
flashing done.... but no booting....stuck on htc logooo...
i try to bootloader unlock but err
C:\adb>fastboot getvar cid
cid: HTC__E11
finished. total time: 0.000s
C:\adb>fastboot oem get_identifier_token
... INFO[ERR] Command error !!!
OKAY [ 0.016s]
finished. total time: 0.016s
how to unlock bootloader ???
i need help....

Are you s-on now?
Then download the 2.3 ruu in my sig, put it on the root of your sd-card, boot in hboot, and select "yes" when prompted.
Don't change the zip name.
After flashing is complete, you can continue with the s-off process by using revolutionary.

ck.sufail said:
hi,,,
my htc desire stuck in htc logoo , is s off and i try to flash with ruu.exe( RUU_Bravo_HTC_Europe_1.15.405.3_Radio_32.30.00.28U _4.05.00.11_release_121865 )
flashing done.... but no booting....stuck on htc logooo...
i try to bootloader unlock but err
C:\adb>fastboot getvar cid
cid: HTC__E11
finished. total time: 0.000s
C:\adb>fastboot oem get_identifier_token
... INFO[ERR] Command error !!!
OKAY [ 0.016s]
finished. total time: 0.016s
how to unlock bootloader ???
i need help....
Click to expand...
Click to collapse
hold on a min.. wtf. u ended ur post with how to unlock bootloader. u started ur post with ur s-off. why did u try run ruu? if ur s-off then u dont need to unlock bootloader. what exactly r ya trying to do? what does it now say in bootloader?

unlocking the bootloader the easy way http://forum.xda-developers.com/showthread.php?t=2133336
good place to start http://forum.xda-developers.com/showthread.php?t=696189
also confused on what you want to do with your phone,

[Q] HTC ONE X Hang after Update

ENDEAVORU XE SHIP S-OFF RL
CID-11111111
HBOOT-1.12.0000
CPLD-None
MICROP-None
RADIO-2.1204.135.20
eMMC- bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
MODEM PATH: OFF
June 28 2012, 11:31:28
Hi guys can somebody help me.. please
my phone stuck at HTC ONE logo
how can i fix this isssue...
after updating through internet it keeps on reboot again and again
i dont know how to fix this..
please help me.. tnx

chingkit09 said:
ENDEAVORU XE SHIP S-OFF RL
CID-11111111
HBOOT-1.12.0000
CPLD-None
MICROP-None
RADIO-2.1204.135.20
eMMC- bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
MODEM PATH: OFF
June 28 2012, 11:31:28
Hi guys can somebody help me.. please
my phone stuck at HTC ONE logo
how can i fix this isssue...
after updating through internet it keeps on reboot again and again
i dont know how to fix this..
please help me.. tnx
Click to expand...
Click to collapse
Search in the thread have many answare for ENDEAVORU XE it is different from ENDEAVORU PVT try to flash the higher firmware.zip manually

Hi
how can i fix this.. i dont know where i download..
im so stress in this problem.
please someone guide me how to fix this issue.
please please please

chingkit09 said:
how can i fix this.. i dont know where i download..
im so stress in this problem.
please someone guide me how to fix this issue.
please please please
Click to expand...
Click to collapse
ok download latest OTA 4.18,401,4 forom HERE
after read this
How to flash?
(bootloader needs to be relocked)
Re-lock your bootloader (this will most probably wipe content of your device)
Copy downloaded .zip to fastboot.exe location (e.g. c:/SDK/platform-tools/fastboot.exe)
Re-name .zip file to firmware.zip
Open command prompt
Boot your device in fastboot mode (vol down + power ===> fastboot)
Connect device to the PC
In command prompt cd to fastboot.exe location
Make sure you have correct modeid and cidnum (type: fastboot getvar all)
Type: fastboot oem lock (if your device is not relocked yet)
Type: fastboot oem rebootRUU and wait for device to reboot
Type: fastboot flash zip firmware.zip and wait for process to complete
Sometimes flashing for the first time doesn't work, so flash firmware.zip again just to make sure.
Type: fastboot flash zip firmware.zip and wait for process to complete
Type: fastboot reboot
Unlock your bootloader and flash custom recovery if you are going to use custom ROM.

chingkit09 said:
how can i fix this.. i dont know where i download..
im so stress in this problem.
please someone guide me how to fix this issue.
please please please
Click to expand...
Click to collapse
after this..
the correct installing of custom rom is.
to unlock and to flash the recovery CWM 5.8.4.0
den install the rom. One_X_4.18.401.3_odexed
is this correct?
can u guide me.. please..
thank you thant

Thant said:
ok download latest OTA 4.18,401,4 forom HERE
after read this
How to flash?
(bootloader needs to be relocked)
Re-lock your bootloader (this will most probably wipe content of your device)
Copy downloaded .zip to fastboot.exe location (e.g. c:/SDK/platform-tools/fastboot.exe)
Re-name .zip file to firmware.zip
Open command prompt
Boot your device in fastboot mode (vol down + power ===> fastboot)
Connect device to the PC
In command prompt cd to fastboot.exe location
Make sure you have correct modeid and cidnum (type: fastboot getvar all)
Type: fastboot oem lock (if your device is not relocked yet)
Type: fastboot oem rebootRUU and wait for device to reboot
Type: fastboot flash zip firmware.zip and wait for process to complete
Sometimes flashing for the first time doesn't work, so flash firmware.zip again just to make sure.
Type: fastboot flash zip firmware.zip and wait for process to complete
Type: fastboot reboot
Unlock your bootloader and flash custom recovery if you are going to use custom ROM.
Click to expand...
Click to collapse
after this..
the correct installing of custom rom is.
to unlock and to flash the recovery CWM 5.8.4.0
den install the rom. One_X_4.18.401.3_odexed
is this correct?
can u guide me.. please..
thank you thant
sorry for the wrong quote.

after the command i did
C:\fastboot>fastboot flash zip Firmware.zip
sending 'zip' (12377 KB)... OKAY [ 1.779s]
writing 'zip'... INFOCan not find [android-info.txt] in zipped
image!
FAILED (remote: 24 parsing android-info fail)
finished. total time: 5.417s
C:\fastboot>fastboot flash zip Firmware.zip
sending 'zip' (12377 KB)... FAILED (remote: (00030003))
finished. total time: 0.001s
what will i do?
please help me fix this.. huhuhuhu

chingkit09 said:
after the command i did
C:\fastboot>fastboot flash zip Firmware.zip
sending 'zip' (12377 KB)... OKAY [ 1.779s]
writing 'zip'... INFOCan not find [android-info.txt] in zipped
image!
FAILED (remote: 24 parsing android-info fail)
finished. total time: 5.417s
C:\fastboot>fastboot flash zip Firmware.zip
sending 'zip' (12377 KB)... FAILED (remote: (00030003))
finished. total time: 0.001s
what will i do?
please help me fix this.. huhuhuhu
Click to expand...
Click to collapse
Your bootloader must be locked or relocket from this where I see I think it is not= And what happen when you run Fastboot oem rebootRUU the command must be exactly like I write with smal and Capital letters and you must to see black screen with HTC logo and after second flash you will see green line goes up

Thant said:
Your bootloader must be locked or relocket from this where I see I think it is not= And what happen when you run Fastboot oem rebootRUU the command must be exactly like I write with smal and Capital letters and you must to see black screen with HTC logo and after second flash you will see green line goes up
Click to expand...
Click to collapse
C:\fastboot>fastboot getvar all
INFOversion: 0.5a
INFOversion-bootloader: 1.12.0000
INFOversion-baseband: 2.1204.135.20
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 2.17.707.3
INFOserialno: SH27GW101562
INFOimei: 353426058935339
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ461****
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 3778mV
INFOdevpower: 33
INFOpartition-layout: None
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
finished. total time: 0.858s
C:\fastboot>fastboot oem lock
... INFOLock successfully...
FAILED (status read failed (Too many links))
finished. total time: 0.178s
C:\fastboot>fastboot oem lock
... INFODevice was already locked!
OKAY [ 0.017s]
finished. total time: 0.018s
C:\fastboot>fastboot oem lock
... INFODevice was already locked!
OKAY [ 0.018s]
finished. total time: 0.019s
C:\fastboot>fastboot oem rebootRUU
... INFOSave data from original MSC...
INFOSave data from SIF...
INFOUpdate partition data to SIF partition
INFOUpdate partition data from original MSC...
INFO[MSG] OKAY
OKAY [ 0.229s]
finished. total time: 0.230s
C:\fastboot>fastboot flash zip firmware.zip
sending 'zip' (12377 KB)... OKAY [ 1.786s]
writing 'zip'... INFOCan not find [android-info.txt] in zipped
image!
FAILED (remote: 24 parsing android-info fail)
finished. total time: 5.426s
look this thant..
it is already relocked
huhuhu help me

chingkit09 said:
C:\fastboot>fastboot getvar all
INFOversion: 0.5a
INFOversion-bootloader: 1.12.0000
INFOversion-baseband: 2.1204.135.20
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 2.17.707.3
INFOserialno: SH27GW101562
INFOimei: 353426058935339
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ461****
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 3778mV
INFOdevpower: 33
INFOpartition-layout: None
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
finished. total time: 0.858s
C:\fastboot>fastboot oem lock
... INFOLock successfully...
FAILED (status read failed (Too many links))
finished. total time: 0.178s
C:\fastboot>fastboot oem lock
... INFODevice was already locked!
OKAY [ 0.017s]
finished. total time: 0.018s
C:\fastboot>fastboot oem lock
... INFODevice was already locked!
OKAY [ 0.018s]
finished. total time: 0.019s
C:\fastboot>fastboot oem rebootRUU
... INFOSave data from original MSC...
INFOSave data from SIF...
INFOUpdate partition data to SIF partition
INFOUpdate partition data from original MSC...
INFO[MSG] OKAY
OKAY [ 0.229s]
finished. total time: 0.230s
C:\fastboot>fastboot flash zip firmware.zip
sending 'zip' (12377 KB)... OKAY [ 1.786s]
writing 'zip'... INFOCan not find [android-info.txt] in zipped
image!
FAILED (remote: 24 parsing android-info fail)
finished. total time: 5.426s
look this thant..
it is already relocked
huhuhu help me
Click to expand...
Click to collapse
are you take the firmware.zip inside the ota archive? or you trying to flash renamed ota to firmware.zip?
or just download this RUU and run as administrator

Thant said:
Your bootloader must be locked or relocket from this where I see I think it is not= And what happen when you run Fastboot oem rebootRUU the command must be exactly like I write with smal and Capital letters and you must to see black screen with HTC logo and after second flash you will see green line goes up
Click to expand...
Click to collapse
Thant said:
are you take the firmware.zip inside the ota archive? or you trying to flash renamed ota to firmware.zip?
or just download this RUU and run as administrator
Click to expand...
Click to collapse
C:\fastboot>fastboot getvar all
INFOversion: 0.5a
INFOversion-bootloader: 1.12.0000
INFOversion-baseband: 2.1204.135.20
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 2.17.707.3
INFOserialno: SH27GW101562
INFOimei: 353426058935339
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ461****
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 3742mV
INFOdevpower: 21
INFOpartition-layout: None
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
finished. total time: 0.824s
C:\fastboot>fastboot oem lock
... INFODevice was already locked!
OKAY [ 0.022s]
finished. total time: 0.023s
C:\fastboot>fastboot oem rebootRUU
... INFOSave data from original MSC...
INFOSave data from SIF...
INFOUpdate partition data to SIF partition
INFOUpdate partition data from original MSC...
INFO[MSG] OKAY
OKAY [ 0.227s]
finished. total time: 0.228s
C:\fastboot>fastboot flash zip firmware.zip
sending 'zip' (11685 KB)... OKAY [ 1.688s]
writing 'zip'... INFOshift signature_size for header checking.
.
INFOchecking model ID...
INFOchecking custom ID...
INFOstart image[boot] unzipping & flushing...
INFOFormat partition LNX done
INFO[RUU]WP,boot,100
INFOstart image[recovery] unzipping & flushing...
INFOFormat partition SOS done
INFO[RUU]WP,recovery,100
INFOERASE backup cid
OKAY [ 2.678s]
finished. total time: 4.367s
yehey its all ready done
what is the next step on this?
please help me thant please..
waiting for your reply

thant..
how can i install the custom rom
the phone is still stockon HTC one
thant teach me how to fix this please... huhuhuhu

chingkit09 said:
thant..
how can i install the custom rom
the phone is still stockon HTC one
thant teach me how to fix this please... huhuhuhu
Click to expand...
Click to collapse
Now go to htcdev.com and unlock your bootloader after this flash Philz recovery 15.5.9 and mount sd card copy rom sense or AOSP to sd card and flash the boot.img from rom.zip to the phone go in recovery and install rom.zip. If you want to install CM11 you need latest Philz recovery or Latest CWM from CM11 thread. but ont this two recoverys Mount sd card not working first flash Philz 5.15.9 and then copy the rom to the sd card and then if you want to install CM11 flash Philz latest or CWM latest and flash CM11
THIS is latest Philz for One X
THIS is philz 5.15.9
For philz recovery take recovery.img inside from archive
And one more Question now your HBOOT must be 1.72 RIGHT?

Thant said:
Now go to htcdev.com and unlock your bootloader after this flash Philz recovery 15.5.9 and mount sd card copy rom sense or AOSP to sd card and flash the boot.img from rom.zip to the phone go in recovery and install rom.zip. If you want to install CM11 you need latest Philz recovery or Latest CWM from CM11 thread. but ont this two recoverys Mount sd card not working first flash Philz 5.15.9 and then copy the rom to the sd card and then if you want to install CM11 flash Philz latest or CWM latest and flash CM11
THIS is latest Philz for One X
THIS is philz 5.15.9
For philz recovery take recovery.img inside from archive
And one more Question now your HBOOT must be 1.72 RIGHT?
Click to expand...
Click to collapse
where i can find the rom.. huhuhu
thant can i chat you? for fast communication please... huhuhu
my head is going to blow..

chingkit09 said:
where i can find the rom.. huhuhu
thant can i chat you? for fast communication please... huhuhu
my head is going to blow..
Click to expand...
Click to collapse
ROM HERE or HERE the first link is close to stock on second most AOSP and AICP roms and hard modyfied sense roms
But first unlock bootloader and flash philz recovery go in recovery and charge your phone to full
waithing to charge your phone you will check wich ROM you want and download and install it you will see bugs and other think

thant im dead
i dont know what to do.. huhuhu please
can i chat you in yahoo?
please help me.. i dont know what to do.
im so stress and i didn't eat my breakfast,lunch
please help my please..
im so lose
i dont know what to do..
or can we chat on fb? please.

chingkit09 said:
thant im dead
i dont know what to do.. huhuhu please
can i chat you in yahoo?
please help me.. i dont know what to do.
im so stress and i didn't eat my breakfast,lunch
please help my please..
im so lose
i dont know what to do..
or can we chat on fb? please.
Click to expand...
Click to collapse
OK are you unlocked your bootloader via htcdev.com go to the site and take your Unlock_code.bin choice all other supported model on the button unlock bootloader after this fallow the instruction in the site after unlock your bootloader, download philz recovery 5.15.9 take recovery.img from the archive and use this comand to flash it fastboot flash recovery recovery.img after this run fastboot erase cache go in recovery and charge your phone
And one more think I write you on the private I dont use yahoo or facebook and I think you not reading what I write you I must to say something 5 times and after this you will do it. Like @Mr Hofs say READING IS GIFT
Yes you are still on the 1.12 becouse you didnt flash the firmware.zip twice like I write on the 2-3 post up I see your command but I see you runt fastboot flash zip firmware.zip only ane time.

the HBOOT still 1.12.0000
how will i change this? huhuhuhu
super lose..

Thant said:
OK are you unlocked your bootloader via htcdev.com go to the site and take your Unlock_code.bin choice all other supported model on the button unlock bootloader after this fallow the instruction in the site after unlock your bootloader, download philz recovery 5.15.9 take recovery.img from the archive and use this comand to flash it fastboot flash recovery recovery.img after this run fastboot erase cache go in recovery and charge your phone
And one more think I write you on the private I dont use yahoo or facebook and I think you not reading what I write you I must to say something 5 times and after this you will do it. Like @MrHofs say READING IS GIFT
Click to expand...
Click to collapse
already done thant.
now i am in the philZ Touch 5
and the cord is connected how to charger the phone?

And one more think I write you on the private I dont use yahoo or facebook and I think you not reading what I write you I must to say something 5 times and after this you will do it. Like @MrHofs say READING IS GIFT
sorry thant..
how to Like @MrHofs say READING IS GIFT
sorry i dont know

[Q] Unable to boot into Recovery- Can't flash SU

Received phone today - 3rd HTC - Sensation>One S>M8
Just Unlocked via HTC Dev site
Flashed latest TWRP - openrecovery-twrp-2.7.1.0-m8.img - and also tried two previous versions. The two latest versions make the phone load right back into hboot screen. First version hangs for a moment, making me think it will boot into Recovery, then phone just reboots.
Will not boot into recovery
Cannot boot from Fastboot and adb says error: device not found.
Latest drivers installed
I even reinstalled HTC Sync
T-mo US
*** TAMPERED ***
*** UNLOCKED ***
M8_UL PVT SHIP S-ON
HBOOT-3.16.0.0000
RADIO-1.16.21331931.LA24G
Open DSP-v38.2.2-00542-M8974.0311
OS-1.57.531.7
eMMC-boot 2048MB
MAY 8 2004,21:19:27.0
Any recommendations?

Did you turn off the fast boot mode?
Sent from HTC One m8, or maybe not anymore

Yes, fast boot has been disabled from the security settings and USB debugging is on.
Sent from my HTC One_M8 using xda app-developers app

Maybe you flashed recovery into boot partition by omission?
Did you use
fastboot flash recovery openrecovery-twrp-2.7.1.0-m8.img

Yes, as far as I can tell, I flashed the recovery correctly.
Sent from my One S using XDA Free mobile app

I got excactly the same problem, but its the international GSM version...
I would be very happy if someone knew a solution

Very strange. Can you guys try flashing Philz recovery and see if it boots now?

stathis95194 said:
Very strange. Can you guys try flashing Philz recovery and see if it boots now?
Click to expand...
Click to collapse
Just tried that, doesnt work either...
I can boot the phone but not get into the recovery...

tschoesi said:
Just tried that, doesnt work either...
I can boot the phone but not get into the recovery...
Click to expand...
Click to collapse
Can you take a screenshot of the fastboot commands/output?
Did you erase cache/dalvik?

stathis95194 said:
Can you take a screenshot of the fastboot commands/output?
Did you erase cache/dalvik?
Click to expand...
Click to collapse
Code:
C:\adb>fastboot.exe flash recovery philz_touch_6.48.4-m8.img
< waiting for device >
target reported max download size of 1830227968 bytes
sending 'recovery' (14436 KB)...
OKAY [ 1.454s]
writing 'recovery'...
OKAY [ 0.762s]
finished. total time: 2.217s
I cant post pictures yet, because im a new member
And yeah, I tried it with and without erasing the cache...

tschoesi said:
Code:
C:\adb>fastboot.exe flash recovery philz_touch_6.48.4-m8.img
< waiting for device >
target reported max download size of 1830227968 bytes
sending 'recovery' (14436 KB)...
OKAY [ 1.454s]
writing 'recovery'...
OKAY [ 0.762s]
finished. total time: 2.217s
I cant post pictures yet, because im a new member
And yeah, I tried it with and without erasing the cache...
Click to expand...
Click to collapse
What's the output of these commands?
fastboot getvar modelid
fastboot getvar cid

stathis95194 said:
What's the output of these commands?
fastboot getvar modelid
fastboot getvar cid
Click to expand...
Click to collapse
Code:
C:\adb>fastboot.exe getvar cid
cid: HTC__102
finished. total time: 0.001s
C:\adb>fastboot.exe getvar modelid
modelid: 0P6B64000
finished. total time: 0.000s
I have the dual sim version by the way, maybe that makes a difference

tschoesi said:
Code:
C:\adb>fastboot.exe getvar cid
cid: HTC__102
finished. total time: 0.001s
C:\adb>fastboot.exe getvar modelid
modelid: 0P6B64000
finished. total time: 0.000s
I have the dual sim version by the way, maybe that makes a difference
Click to expand...
Click to collapse
oh!!!! that makes all the difference in the world I think you need a different recovery to support dual sim.
Try this one:
https://yadi.sk/d/cMN-N_2hWotAH

stathis95194 said:
oh!!!! that makes all the difference in the world I think you need a different recovery to support dual sim.
Try this one:
Click to expand...
Click to collapse
I feel so dumb now for not thinking of this! Im in the recovery now Thanks alot!

tschoesi said:
I feel so dumb now for not thinking of this! Im in the recovery now Thanks alot!
Click to expand...
Click to collapse
That's great that you have it working now.
All credit goes to @kentilo here:
http://forum.xda-developers.com/htc-one-m8/help/htc-one-m8-dual-sim-european-version-t2816991

I'll be back in front of a computer in about nine hours. I'll try then. Not on the dual SIM but I'll try philz recovery. Thanks.
Sent from my HTC One_M8 using xda app-developers app

stathis95194 said:
Very strange. Can you guys try flashing Philz recovery and see if it boots now?
Click to expand...
Click to collapse
That did it! PHILZ TO THE RESCUE! Pretty cool UI.
Thanks again! Time to s-off!!!

tschoesi said:
Code:
C:\adb>fastboot.exe getvar cid
cid: HTC__102
finished. total time: 0.001s
C:\adb>fastboot.exe getvar modelid
modelid: 0P6B64000
finished. total time: 0.000s
I have the dual sim version by the way, maybe that makes a difference
Click to expand...
Click to collapse
I have LG F180s, I used tinybeen+LGnpst tutorial, I can fastboot which has information like:
Product_name: Mako
Variant: mako 32gb
bootloader version: makoz10f
secure boot: enabled
lock state: unlocked
I tried your fastboot variables i.e.
fastboot.exe getvar cid (returns empty value for cid)
fastboot.exe getvar modelid (returns empty value for modelid)
Its been 3 days, that I am trying to get into recovery. I have tried both TWRP and CWM recoveries (various versions for LS970, Mako, PhilZ). I have also tried flashing stock ROM via LG Flash Tool 2014, completes successfully but phone enters BootLoop.
Therefore teenybins+LGnpst took me out of bootloop but now it cannot enter recovery. Although Teenybins say that they include TWRP

iltaf_k said:
I have LG F180s, I used tinybeen+LGnpst tutorial, I can fastboot which has information like:
Product_name: Mako
Variant: mako 32gb
bootloader version: makoz10f
secure boot: enabled
lock state: unlocked
I tried your fastboot variables i.e.
fastboot.exe getvar cid (returns empty value for cid)
fastboot.exe getvar modelid (returns empty value for modelid)
Its been 3 days, that I am trying to get into recovery. I have tried both TWRP and CWM recoveries (various versions for LS970, Mako, PhilZ). I have also tried flashing stock ROM via LG Flash Tool 2014, completes successfully but phone enters BootLoop.
Therefore teenybins+LGnpst took me out of bootloop but now it cannot enter recovery. Although Teenybins say that they include TWRP
Click to expand...
Click to collapse
Totally wrong part of the forum !

fastboot getvar modelid
modelid: 0PKV10000
finished. total time: -0.000s
fastboot getvar cid
cid: HTC__Y13
finished. total time: -0.000s
What's the correct recovery version for this? i tried a lot of versions. its not opening :/
HTC One M8s
fastboot unlocked.
not rooted(hoping to root through recovery)

Help for write CID Unsuccess

I am trying write CID but unsuccess.
Blow is my command list.
c:\Adb>fastboot oem writecid 11111111
...
FAILED (remote: unknown command)
finished. total time: 0.011s

kevin469 said:
I am trying write CID but unsuccess.
Blow is my command list.
c:\Adb>fastboot oem writecid 11111111
...
FAILED (remote: unknown command)
finished. total time: 0.011s
Click to expand...
Click to collapse
you need S-OFF to change your CID

HI Thant,
Thanks for your reply. I got the method for this issue. My M9 already s-off as command should be at download mode.

kevin469 said:
HI Thant,
Thanks for your reply. I got the method for this issue. My M9 already s-off as command should be at download mode.
Click to expand...
Click to collapse
OK but when you are with M( why you post your question in ONE X forum

Hello Thant,
Thank you for your reply. Sorry my mistake post to ONE X forum, How can i move this post to M9 forums?