Related
DISCLAIMER: I AM NOT RESPONSIBLE FOR ANYTHING YOU DO TO YOUR PHONE WHILE USING ANY OF THE INFORMATION LOCATED BELOW. IF YOU DO NOT UNDERSTAND WHAT IS BEING DONE, PLEASE DO NOT TRY ANYTHING DONE HERE!
1) First of all you need is to Root your devices and unlock your Bootloader. (Belive me I tried to Customize without Unlocking BL and got HardBricked, yeah I know I've learnt by the hard way xD)
2) Make a Nanadroid Backup in case you mess up with your phone. To do it, you need to reboot into Recovery (Vol Up + Power --> After that press twice Volume Down and press Power Button. Then click "backup and restore" --> "backup" and continue.
3) Choose the rom (CRom) you want and also make sure it's compatible with your device. Do some research, in many cases the camera is the indicator if it's compatible or not (13M or 8M), any way Do some research. Download it and save it in the palce you want to work with it (I've done it all in my phone).
4) If you can get the Original ROM (ORom) from your device get it, it's better to have it, in my case I couldn't get it but I used the files from my device in "/" folder
5) Extract the CRom in to a New Folder (also extract ORom). Browse in the CRom into "system/" and find build.prop and open it with a Text Editor. Then open from your ORom the build.prop (located in "/system/" in your device or in "system/" in the ORom you downloaded) and here is the important thing. From ORom build.prop Copy the exact values of ro.product.model, ro.product.name, ro.build.description and ro.buildfingerprint and replace them in the CRom Build.prop. It's very important to replace this so your device could get the update fine. Zip it again and save it, it's ready to flash it.
6) Then you need the modem.img, try to find it in http://downloads.codefi.re/houstonn/lgog/modem (Thanks to CodeFire Team), or try to get it from Your device, The dir is "/dev/block/plataform/msm_sdcc.1/by-name/" and there will be 3 files you need to copy "modem", "modemst1" and "modemst2". If you just have "modem" copy it and that's it. Also if you want to preserve your APN list, go to directory "/system/etc/" and copy apns-conf.xml.After flashing put those files again in their places and set up the correct Permissions table (Modem lrwxrwxrwx, apn-conf.xml -rw-r--r--)
**UPDATE: Don't worry to much for the baseband , I was doing some research and found that many baseband are the same for many variants. On the back of the phone find the FCC ID which is the one that determines the baseband frequencies of the device. Google it and check which devices have the same FCC ID as yours. Then download the modem.IMG and flash it **
7) Follow the instuctions for installation of the ROM, and after flashing the CRom that you've created and gapps, if you could found your modem.zip from Codefire team, then flash it.
8) And Voila! Your Custom-Custom ROM it's flashed! Wait for the first time booting and check if everithing is ok! If you're locked out of 4G/3G/2G check the APN's configuration to match with your carrier's. Hope it help you! :fingers-crossed:
**IMPORTANT** Remember to do this everytime you Update the ROM
If you found this usefull, don't forget to click the "Thanks" button
So, what you are saying is, it is possible to use the sprint ROMs on our devices? :highfive:
Yes, everything is possible with a little bit of tweaking
By now I've tested with my E976 ThinkingBridge and CM ROMs and everything is running like Charm
Sent from my LG-E976 CM 10.1 using xda app-developers app
Hey there. I have a f180s and was trying to install cm10 but i encountered an error on build prop. Can u upload a copy of your build prop in .txt form i could download? I'll edit my build prop to match e975. Gracias.
never mind. done. thank you.
Thank you so much, you should post this in the android development section to have more impact
Some weeks a go I got my E976 (mexico) and when I first came to the optimus g forum here I was totally disappointed.. There are so many variants!!. I wasn't sure if I can install any of these roms on my phone. I think you've helped me to find the answer. Thanks!!
Enviado desde mi LG-E976 usando Tapatalk 2
tommyrumbler said:
never mind. done. thank you.
Click to expand...
Click to collapse
Sorry for not answering, good it worked
You're welcome my friend!
manuetsia said:
Thank you so much, you should post this in the android development section to have more impact
Click to expand...
Click to collapse
You're welcome my friend! I wish I could post over there... But I still need to post a little bit more to get access As soon as it's possible I will move the post to developer forum and post a little tool for simplifying the process wait for it
mutesperm said:
Some weeks a go I got my E976 (mexico) and when I first came to the optimus g forum here I was totally disappointed.. There are so many variants!!. I wasn't sure if I can install any of these roms on my phone. I think you've helped me to find the answer. Thanks!!
Enviado desde mi LG-E976 usando Tapatalk 2
Click to expand...
Click to collapse
You are welcome my friend :highfive:
Sent from my LG-E976 CM 10.1 using xda app-developers app
Hi, I got an E976
Let's say the ROM's modem works ok, what's the difference if I just leave the Custom ROM made for E975 build.prop untouched?
pedroren said:
Hi, I got a E976, but I can't find modem.IMG
There's no /system/firmware in mine.
Also tried using the search function of ES File Explorer.
Any suggestions?
Click to expand...
Click to collapse
Yep, I've found the folder, it is "/dev/block/plataform/msm_sdcc.1/by-name/" and there wil be 3 files you need to copy "modem", "modemst1" and "modemst2". If you just have "modem" copy it and that's it. Also if you want to preserve your APN list, go to directory "/system/etc/" and copy apns-conf.xml.
After flashing, put those files again in their places and set up the correct Permissions (Modem lrwxrwxrwx, apn-conf.xml -rw-r--r--)
pedroren said:
Hi, I got an E976
Let's say the ROM's modem works ok, what's the difference if I just leave the Custom ROM made for E975 build.prop untouched?
Click to expand...
Click to collapse
Basically is to preserve the integrity and information of your device. The first time you flash it you need to customize the builp.prop because the update.zip would fail to install the custom rom. After that, you can flash it within problems, but the ro.product.model, ro.product.name, ro.build.description and ro.buildfingerprint , especially the last two will be replace with the info of an other device, and this could bring you problems with your device, thats why you need to customize it each time you update your rom. If you want to modify your device to make it an E-975, the best option is to make a clean install and flash it with a E975.kdz with the exact baseband(as it's mention on the post, many variants have the same baseband). Hope it help you
you really do not need to flash an e975 rom via kdz updater to your e97x device just to flash a rom intended for a different device. follow guide below and you can flash any rom to you e97x :
You do this with 7-Zip/WinRAR
Note: DO NOT EXTRACT ROM!
In the ROM go to:
/META-INF/com/google/android/updater-script
1)Open updater-script with a script editor such as notepad/notepad++ (makes things 10x easier), or gedit if you use linux
2)Delete the first line of code (all the way up to the first semicolon you see) and delete the first semi-colon as well
tommyrumbler said:
you really do not need to flash an e975 rom via kdz updater to your e97x device just to flash a rom intended for a different device. follow guide below and you can flash any rom to you e97x :
You do this with 7-Zip/WinRAR
Note: DO NOT EXTRACT ROM!
In the ROM go to:
/META-INF/com/google/android/updater-script
1)Open updater-script with a script editor such as notepad/notepad++ (makes things 10x easier), or gedit if you use linux
2)Delete the first line of code (all the way up to the first semicolon you see) and delete the first semi-colon as well
Click to expand...
Click to collapse
Just to clarify, the part of flashing through KDZ is to convert a E97X into a NewOutOfBox E975 as it is said in the reply, and it's true, you can delete the ROM verifier line (1st one) if you just want to install the rom within preserving the info of your device in the build.prop .
MODEM
Que tal amigo yo de nuevo, me podrías pasar la imagen del MODEM, de Telcel, ya que la perdí y no la he encontrado en la red. Lo que pasó fue que Flashee con valores Bell (Canada) y si agarra lo de Telcel (sólo para hablar, más no los datos) y tampoco el WIFI.
Saludos y Gracias.
Hi there, Thanks for the guide, it is very helpfull.
I have an E987 (south america's version of lg optimus g, without LTE), i followed your guide but in twrp i'm still getting error (7), in build.prop there is many lines that says e975
For example
ro.build.display.id=pac_e975-userdebug 4.2.2 JDQ39E eng.faust.20130603.184321 test-keys
ro.product.device=e975
ro.build.product=e975
ro.cm.device=e975
ro.pacrom.version=e975_PAC_JB_4.2.2-v22.3.0_20130603-184321
ro.modversion=pa_e975-3.15-03^b2013-184321
ro.aokp.version=e975_jb-mr1_milestone-1
ro.cm.version=10.1.0-RC4-e975
should i change all of them into e987 in order to work?, my device is white in the back, it has no FCC ID text, and it IS an optimus G, not a g pro.
What should i do???
Thanks in advance!!!
P.S. I couldn't find modem.img on the web, so i copied modem modemst1 modemst2 from my device. Thats right? i attach build.prop from my original firmware (btw i couldn't find the flashable file)
P.S 2: I should be able to port Sprint's LG optimus G roms aswell?
Hi, amigo. This would work on the LG E-977?
EddGu said:
Hi, amigo. This would work on the LG E-977?
Click to expand...
Click to collapse
I´ve tested it on my E976 and everything ok. Should work on your E977... try it.
So you say to use any Rom from any OG Modell are just some build.prop edit's??
Hello, my device is the E977, I flashed the Paranoid Android ROM for the E975 and everything works great except that I have no signal, I downloaded the modem from the link you provided and flashed the E977 modem but still got no 3G or even EDGE, what am I doing wrong? I tried the rom Pacman v23 for the E975 and I didnt even had to flash any modems, it worked on my E977 just fine, why this one doesnt? help please
roymouse said:
Que tal amigo yo de nuevo, me podrías pasar la imagen del MODEM, de Telcel, ya que la perdí y no la he encontrado en la red. Lo que pasó fue que Flashee con valores Bell (Canada) y si agarra lo de Telcel (sólo para hablar, más no los datos) y tampoco el WIFI.
Saludos y Gracias.
Click to expand...
Click to collapse
Hi friend!... I have the same problem on my E976. I flashed a stock rom (kdz) form europe, and then i´ve flashed modems from BELL (canada) and ATT (USA), these two are good to get 3G and HSPA, but not LTE. Links are below: (flasheable through CWM)
I don´t know if its a problem ob baseband or the ROM doesn´t admit LTE connection... does anyone knows what´s the problem here?
http://downloads.codefi.re/houstonn/lgog/modem/Canadian/cwm-lgog_e973-JB-bell_NEW_modem.zip
http://downloads.codefi.re/houstonn/lgog/modem/ATT/cwm-lgog_e970_20j-att_jb.modem.zip
Traduccion:
Hola Amigo!, tengo el mismo problema que tu en mi E976. Tuve que flashear un rom stock libre de europa y no me daba señal, asi que he flasheado los modems de ATT y BELL y han funcionado perfecto para 3G y HSPA, pero no para LTE. Te dejo los links (se pueden flashear por CWM).
Lo que no sé es si es problema de la baseband o el ROM no admite la conexión LTE... alguien sabe cual puede ser el problema aqui?.
---------- Post added at 12:47 PM ---------- Previous post was at 12:41 PM ----------
Would be great if someone in stock JB ROM (for E976, mexico) could upload the modem files so we can fix these problems... anyone??
mutesperm said:
Hi friend!... I have the same problem on my E976. I flashed a stock rom (kdz) form europe, and then i´ve flashed modems from BELL (canada) and ATT (USA), these two are good to get 3G and HSPA, but not LTE. Links are below: (flasheable through CWM)
I don´t know if its a problem ob baseband or the ROM doesn´t admit LTE connection... does anyone knows what´s the problem here?
http://downloads.codefi.re/houstonn/lgog/modem/Canadian/cwm-lgog_e973-JB-bell_NEW_modem.zip
http://downloads.codefi.re/houstonn/lgog/modem/ATT/cwm-lgog_e970_20j-att_jb.modem.zip
Traduccion:
Hola Amigo!, tengo el mismo problema que tu en mi E976. Tuve que flashear un rom stock libre de europa y no me daba señal, asi que he flasheado los modems de ATT y BELL y han funcionado perfecto para 3G y HSPA, pero no para LTE. Te dejo los links (se pueden flashear por CWM).
Lo que no sé es si es problema de la baseband o el ROM no admite la conexión LTE... alguien sabe cual puede ser el problema aqui?.
---------- Post added at 12:47 PM ---------- Previous post was at 12:41 PM ----------
Would be great if someone in stock JB ROM (for E976, mexico) could upload the modem files so we can fix these problems... anyone??
Click to expand...
Click to collapse
I did it. Send me a PM.
Sent from my LG-E975 using xda premium
Hi, i brought head unit ES9015V from Erisin. i would like to root/install custom rom, but i can't identify it. Maybe some one could help me.
Model number : rkpx2
Screen :1024*600 HD
CPU : RK3188
MCU version number : LM-AND841PX-8015V1.15
Android version: 4.4.4
Kernel version:3.0.36+
[email protected] #145
Build number
PX2_LEIMA_DAZHONG-V1.00.0043.00.00-2015-07-30
there is link from Erisin www erisinwholesale.com/special-car-dvd/vw/erisin-es9015v-8-vw-android-444-car-dvd-gps-413.html
Thanks.
Pretty simple you need the ROM for an RK3188 with the screenresolution 1024x600.
If you go to Malaysk opened thread you will find your needed firmware.
Gesendet von meinem C6903 mit Tapatalk
9_Mad-Max_5 said:
Pretty simple you need the ROM for an RK3188 with the screenresolution 1024x600.
If you go to Malaysk opened thread you will find your needed firmware.
Gesendet von meinem C6903 mit Tapatalk
Click to expand...
Click to collapse
Hi thanks for response,
but is my device MTCB-Device, because my MCU version number is LM-AND841PX-8015V1.15 as i see all MCU for Malaysk starts with MTCB and mine starts with LM, it confuses me a little what is the worst scenario if i install wrong Malaysk firmware ( i mean RK3188 and 1024x600 selected properly but not MCU)?
Worst case is a hard brick.
Normaly this firmware should work but maybe you should ask Malaysk.
No, its NOT an MTCB device, MTCB would appear at the start of the MCU number if it was an MTCB unit, so youre in the wrong thread.
Not even heard of that one before so cant offer any advice on what type it is I m afraid.
Hello
I recently bought the same device.
What an mistake was, like I know now.
And I got stuck at the same problem but I'm not pretty sure if it is an RK3066 or RK3188 unit.
So I thought about it would it be possible to use another RK3188 SoM-Card with an MTCB MCU in the same device?
That would make it possible to use Malayskis ROMs, I think.
Gesendet von meinem E6653 mit Tapatalk
I just know now that my idea was wrong to change the SoM.
Because the MCU is on antoher Board.
But what would be if the MCU-Hardware is the same and I just install the MTCD-MCU-Software.
After that it should be possible to install the new MTCD-Software or am I wrong?
Hi.
I have the same model.
Do you know if you can do root?
A greeting.
Hola.
Yo tengo el mismo modelo.
¿sabeis si se puede hacer root?
Un saludo.
Dudas!!!
Yo también tengo el ES9015v y querría saber si alguien ha conseguido ROOT, sabe como entrar en recovery y así poder cambiar la ROM a este modelo
I also have the ES9015v and would like to know if anyone has gotten ROOT, you know how to enter recovery and be able to change the ROM to this model
root unit with Kingroot (you will need an internet connection)
Install Supersu-me.
https://androidmtk.com/replace-kinguser-with-supersu
This units have NO user accessible recovery!
If you mess with system files it will turn into a soft brick!
The only way to fix it is with a rom installation.
There is no roms available to the public.
I have A single din unit and i soft bricked it after rooting it and installing some xposed modules.
What saved my unit was after much negotiation etc, i was able to acquired the rom and mcu update for it.
a few other points,
Current roms in the xda are not compatible with this units even though they have the same chips.
The firmware is riddled with bugs, this things are running test firmwares.
dvr crashes every 5 minutes.
Any launcher you install gets disabled after a reboot.
Bluetooth streaming crashes the Bluetooth stack and only a reset makes work again.
Danke. Sie können Firmware hochladen? Bitte
Thanks for the reply.
I try it and I tell you that this has been
Gracias, por la respuesta.
Lo pruebo y os cuento que tal ha ido
donpuen said:
Thanks for the reply.
I try it and I tell you that this has been
Gracias, por la respuesta.
Lo pruebo y os cuento que tal ha ido
Click to expand...
Click to collapse
Have you found any solution on installing malaysk's roms?
Erisin ES9015V
hi there
where I can find the original MCU from Erisin ES9015V??
thanks for help
Sorry for my bad english
I have a ze500cl.
I flashed raw firmware of ze550ml by Asus Flash Tool via Droidboot (fastboot)
Now the phone stuck and detect Cloverview device and show white usb logo on black screen.
Please help me to unbrick like ze550ml ze551ml by xFSTK (dnx_fwr.bin, droidboot_dnx.img.POS_sign.bin, ifwi.bin)
I can't find any one file on internet. in zip firmware included very much bin file but not working
Try this...
http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256
cheers
col
brokey said:
Try this...
http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256
cheers
col
Click to expand...
Click to collapse
That is for ZE550ML/ZE551ML, not for ZE500CL. There is apparently no raw firmware for the ZE500CL variant.
djole94hns said:
That is for ZE550ML/ZE551ML, not for ZE500CL. There is apparently no raw firmware for the ZE500CL variant.
Click to expand...
Click to collapse
There is a firmware. Need RAW? I Have RAW 118 firmware.
Thank for reply, i'm still wait
phdanhlc said:
Thank for reply, i'm still wait
Click to expand...
Click to collapse
You can certainly something to try, but I don't know exact settings, but you can try.
phdanhlc said:
Thank for reply, i'm still wait
Click to expand...
Click to collapse
Did you have found bin files for ze500cl to flash in xftsk?? I really need that
waltermaffy said:
Did you have found bin files for ze500cl to flash in xftsk?? I really need that
Click to expand...
Click to collapse
İ can help you. Because I had same problem and I fixed. You have to stock Rom on by ASUS web site. Later open this Rom file with winrar. There is IFWi.zip. open this file. Ifwi_S_4_DEV_ZE5OOCL.bin and dnx_osr_s_4_dev_ze500cl.bin and and there is droitboot.img. You have to change droitboot.img.bin
That is working . I treid
cRimE34 said:
İ can help you. Because I had same problem and I fixed. You have to stock Rom on by ASUS web site. Later open this Rom file with winrar. There is IFWi.zip. open this file. Ifwi_S_4_DEV_ZE5OOCL.bin and dnx_osr_s_4_dev_ze500cl.bin and and there is droitboot.img. You have to change droitboot.img.bin
That is working . I treid
Click to expand...
Click to collapse
I made this but it gives me the same error, after the "Write--->DnER" it tells me Windriver error: .... , Timeout expired and LogError so the download ofthe firmware abort. I don't know how to solve this
waltermaffy said:
I made this but it gives me the same error, after the "Write--->DnER" it tells me Windriver error: .... , Timeout expired and LogError so the download ofthe firmware abort. I don't know how to solve this
Click to expand...
Click to collapse
I have same problem As above. I am also trying in linux with xfstk but no luck, flashing is always a FAIL. Also if I had the RAW fw I could try to use Intel Phone Flash Tool Lite, but no RAW fw provided.
What is the GP Flag Override Value to ZE500CL (Z00D)?
Try uploading the ROM via TWRP , TWRP but did not work , so try via CWM and I bricked my phone . On power does not pass the Intel logo and when connected to PC recognizes it as a device: Coverview plus. If I try to enter the bootloader only displays a USB icon .
I tried to recover the intel software Xsftk XDA following tutorials without success. I think the problem is that these tutorials are for other models Asus Zenfone and none for ZE500CL ( Z00D ) . I managed to download the .bin files, but I think the problem when trying to update via Xsftk lies in the parameter : GP Flag Override Value , the value for other models are 0x80000245 , 305, 205 and 807 but not the value for ZE500CL appears .
If someone had this problem and has solved much you appreciate report by this route .
Thanks in advance to the whole community. !
--------
Intente subir la rom via twrp, pero twrp no funcionaba, asi que intente via cwm y he brickeado mi telefono. Al encenderlo no pasa del logo de Intel y al conectarlo al PC lo reconoce como un dispositivo: Coverview plus. Si intento entrar al bootloader solo muestra un icono de USB.
He intentado recuperarlo con el software de intel Xsftk siguiendo tutoriales de XDA, sin exito. Creo que el problema radica en que estos tutoriales son para otros modelos Asus Zenfone y ninguno para el ZE500CL (Z00D). He logrado descargar los archivos .bin, pero creo que el problema al intentar actualizar via Xsftk radica en el parametro: GP Flag Override Value, cuyo valor para otros modelos son 0x80000245, 305, 205 y 807 pero no aparece el valor para el ZE500CL.
Si alguien a tenido este problema y lo ha solucionado mucho le agradecería informar por esta via.
Gracias de antemano a toda la comunidad.!
phdanhlc said:
Sorry for my bad english
I have a ze500cl.
I flashed raw firmware of ze550ml by Asus Flash Tool via Droidboot (fastboot)
Now the phone stuck and detect Cloverview device and show white usb logo on black screen.
Please help me to unbrick like ze550ml ze551ml by xFSTK (dnx_fwr.bin, droidboot_dnx.img.POS_sign.bin, ifwi.bin)
I can't find any one file on internet. in zip firmware included very much bin file but not working
Click to expand...
Click to collapse
here the link for raw firmware file. hope you understand how to use it.. ask if any question
https://yadi.sk/d/-OUgI2ZxrkdPR
Ak-0 said:
I have same problem As above. I am also trying in linux with xfstk but no luck, flashing is always a FAIL. Also if I had the RAW fw I could try to use Intel Phone Flash Tool Lite, but no RAW fw provided.
Click to expand...
Click to collapse
Bad choise trying modding an intel phone. My zenfone still be dead in a drawer, do you have any news?
Hola amigo, me ha sucedido recientemente lo mismo, ¿logró recuperarlo, yo no he podido AT&T no da soporte para este modelo, gracias
made this but it gives me the same error, after the "Write--->DnER" it tells me Windriver error: .... , Timeout expired and LogError so the download ofthe firmware abort. I don't know how to solve this
Hi everybody, plz someone have this file NASH_AMX_NPX26.122-69_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.rar, i need it to return to stock my moto z2. Thanks
You can use unbranded retail SW linked in other thread with no issues at all...
Thanks but i need it, i have a problem, im trying to bypass the frp via Moto FRP from iguru4life but always nothing happen in the screen, when the program say that i need to accept enable usb debugging nothing happen, one technician try to make it with sigma box, eft dongle, ultimate multi tools, and nothing happen when they click on enable adb in the screen nothing happen, someone know what i need it. Thanks
bsforte said:
Thanks but i need it, i have a problem, im trying to bypass the frp via Moto FRP from iguru4life but always nothing happen in the screen, when the program say that i need to accept enable usb debugging nothing happen, one technician try to make it with sigma box, eft dongle, ultimate multi tools, and nothing happen when they click on enable adb in the screen nothing happen, someone know what i need it. Thanks
Click to expand...
Click to collapse
I don't get the relation between FRP issue and stock SW...
Have you tried to flash the version I indicated to you using complete provided flash sequence?
Are you bootloader unlocked?
EDIT: anyway there is no frp.bin on mentioned stock fw... :/
Yes i fla**** but nothing happen, i have bootloader locked.
bsforte said:
Yes i fla**** but nothing happen, i have bootloader locked.
Click to expand...
Click to collapse
As I imagined.... you asked on OP for a firmware but it is not a solution for FRP issues...
Have you tried any Moto FRP unlock solution?
Don't you have the needed password?
Yes i tried many solutions, but the problem when the instructions say click yes on the screen to enable usb debugging, nothing happen in the screen of the cellphone, no ask about enable usb debug, dont show nothing.
bsforte said:
Hi everybody, plz someone have this file NASH_AMX_NPX26.122-69_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.rar, i need it to return to stock my moto z2. Thanks
Click to expand...
Click to collapse
What ROM did you install, instead of AMX
@bsforte @rdkai @enetec
I'm also looking for a solution to bypass FRP due to unable to remember or recover forgotten password.
Were you able to bypass FRP on Moto Z2 Force "NASH" ? @enetec Why is firmware not the solution for FRP bypass?
How is this FRP implemented persistently, is it a file on the internal flash disk, which, if the file exists, the rom code then prompts the user to login to g account?
anyone solved the FRP removal on z2 force?
There you go (Aquí tienes)
https://rsdsecure-cloud.motorola.co...742320&Signature=IJPT3ohg46tjjj2tRWuF/Y9Ld1o=
Hi,
I'm getting Access denied, can you share it from another place?
Thank you.
[email protected] said:
Hi,
I'm getting Access denied, can you share it from another place?
Thank you.
Click to expand...
Click to collapse
https://drive.google.com/open?id=1hAshe8f1RYNS4xD7xeWGrSFSi9_eXsMc There you go
Marcowe said:
https://drive.google.com/open?id=1hAshe8f1RYNS4xD7xeWGrSFSi9_eXsMc There you go
Click to expand...
Click to collapse
de casualidad tendras el firmware de telcel pero el de Andriod 8.0?
Saludos
By any chance do you hace the Telcel firmware but Android 8.0?
Regards
williegomezt said:
de casualidad tendras el firmware de telcel pero el de Andriod 8.0?
Saludos
By any chance do you hace the Telcel firmware but Android 8.0?
Regards
Click to expand...
Click to collapse
Claro que sí
Aquí lo tienes:
https://rsdsecure-cloud.motorola.co...312269&Signature=R8aYawlFoct68ARt1c0rnI0prX0=
Marcowe said:
Claro que sí
Aquí lo tienes:
https://rsdsecure-cloud.motorola.co...312269&Signature=R8aYawlFoct68ARt1c0rnI0prX0=
Click to expand...
Click to collapse
Muchas gracias.
Marcowe said:
Claro que sí
Aquí lo tienes:
https://rsdsecure-cloud.motorola.co...312269&Signature=R8aYawlFoct68ARt1c0rnI0prX0=
Click to expand...
Click to collapse
Hola Marcowe, espero se pueda poner en otra ruta como el anterior.
Hi Marcowe, I hope that you can place it in another place like the other one.
Thanks!
Regards
[email protected]
[email protected] said:
Hola Marcowe, espero se pueda poner en otra ruta como el anterior.
Hi Marcowe, I hope that you can place it in another place like the other one.
Thanks!
Regards
[email protected]
Click to expand...
Click to collapse
existe diferencia de esta rom con la retail?
Basically, it's free of the carrier dependencies shu as some applications that you can't uninstall, another one and maybe the most troublesome for some of us is that when Motorola makes a new FW release we need to wait until the carrier gives the ok and that takes much time for Telcel
Marcowe said:
Claro que sí
Aquí lo tienes:
https://rsdsecure-cloud.motorola.co...312269&Signature=R8aYawlFoct68ARt1c0rnI0prX0=
Click to expand...
Click to collapse
Sorry, but the file has already expired on March 17th, 2018 based on the timestamp "Expires=1521312269" param, it only downloads 270 MB of the file and stops everytime because of that.
Perdón, pero el archivo ya expiró el 17 de marzo de 2018, basándose en el parámetro con timestamp: "Expires=1521312269", solo descarga 270 MB del archivo y se detiene debido a eso.
Hi
I have received latest Wanbo model week ago. Have been owning many projectors and android tv sets before but this one is my first projector with embedded Android bought for testing and future mods
Projector has very good hardware for the price, but fails miserably on software level.
Straight of the box with the latest software update many apps do not work well or at all. Netflix returns -80 errors on start. Disney and amazon apps crashing. It is not possible to see projector as cast source from android phone (Poko F3) without app that only cast in SD and displays annoying widgets.
To workaround very poor android experience I have bough cheapest chromecast but because projector requires android tv app to stream from hdmi it is not possible to use chromecast the same way as on tv. Simple actions like changing video quality on chromecast doesn't work and returns user to projector os.
Then I figured out to connect keyboard with touch pad. This allows me to use chrome on projector with youtube and netflix like on PC.
Netflix and other streaming providers are on SD quality due to lack of wildewine support so not really benefiting from projectors full hd features.
After all week of poking with it I would never go with the Android embedded in projector and prefer chromecast or connecting laptop or even phone to normal hdmi only projector that does have good contrast. It is amazing quality hardware but it looks like thet got no time to polish software.
Wanbo T2 seems to be more interested and discussed than T6
i got my T6 Max, and found it's Chinese Version, still searching the Global version firmware for updating it ,
so terrible.....
Good , I recently bought a Wanbo T6 MAX (2gb/16gb GLOBAL VERSION) , the team I mark update by OTA and to update it turned off and does not pass the welcome screen, talk to the provider and I sent this firmware.
Z9-20220407-EN-3.5 1.rar
Compressed (zipped) Folder
1drv.ms
1.I format a pendrive in fat32.
2. I copy the files.
3. I connect the usb and then the power supply.
4. I press the one button on the T6 MAX until it flashes and release it, it comes out with a welcome message but it doesn't go any further.
What can I do?
similar error:
--------------------------------------------------
Buenas , recientemente he comprado un Wanbo T6 MAX (2gb/16gb GLOBAL VERSION) , el equipo me marco actualizacion por OTA y al actualizar se apago y no pasa de la pantalla de bienvenida, hable con el proveedor y me mando este firmware.
Z9-20220407-EN-3.5 1.rar
Compressed (zipped) Folder
1drv.ms
1.Formateo En fat32 un pendrive.
2. Copio los ficheros.
3. Conecto el usb y luego la fuente de alimentacion.
4. Presiono el unico boton del T6 MAX hasta que parpadea y lo suelto, sale mensaje de bienvenida pero no pasa de ahi.
Que puedo hacer¿?
similar error:
elmartin7 said:
Good , I recently bought a Wanbo T6 MAX (2gb/16gb GLOBAL VERSION) , the team I mark update by OTA and to update it turned off and does not pass the welcome screen, talk to the provider and I sent this firmware.
Z9-20220407-EN-3.5 1.rar
Compressed (zipped) Folder
1drv.ms
1.I format a pendrive in fat32.
2. I copy the files.
3. I connect the usb and then the power supply.
4. I press the one button on the T6 MAX until it flashes and release it, it comes out with a welcome message but it doesn't go any further.
What can I do?
similar error:
--------------------------------------------------
Buenas , recientemente he comprado un Wanbo T6 MAX (2gb/16gb GLOBAL VERSION) , el equipo me marco actualizacion por OTA y al actualizar se apago y no pasa de la pantalla de bienvenida, hable con el proveedor y me mando este firmware.
Z9-20220407-EN-3.5 1.rar
Compressed (zipped) Folder
1drv.ms
1.Formateo En fat32 un pendrive.
2. Copio los ficheros.
3. Conecto el usb y luego la fuente de alimentacion.
4. Presiono el unico boton del T6 MAX hasta que parpadea y lo suelto, sale mensaje de bienvenida pero no pasa de ahi.
Que puedo hacer¿?
similar error:
Click to expand...
Click to collapse
Did you checked fw is correct? Try other port and other usb?
And i dont "see" u extract rar file into USB FAT32?
oldman20 said:
¿Has comprobado que fw es correcto? Probar con otro puerto y otro usb?
¿Y no "veo" que extrae el archivo rar en USB FAT32?
Click to expand...
Click to collapse
I doubt the firmware is correct because it was sent to me for the t2 max z9, and I told the supplier.
I tried with several pendrives and in the different usb ports yes.
elmartin7 said:
I doubt the firmware is correct because it was sent to me for the t2 max z9, and I told the supplier.
I tried with several pendrives and in the different usb ports yes.
Click to expand...
Click to collapse
Huh, T2 Max?
oldman20 said:
Huh, T2 Max?
Click to expand...
Click to collapse
Yes....
elmartin7 said:
Yes....
View attachment 5603993
Click to expand...
Click to collapse
Wait! You said that rom for T6Max right?
oldman20 said:
Wait! You said that rom for T6Max right?
Click to expand...
Click to collapse
yes, my model is t6 max, but maybe it is the chinese version the t2max z9 = a t6 max?
send me this :
The provider wrote me again, but he has sent me a recovery to update from the android menu, and it doesn't work, I share it in case any colleague can use it, it includes video.
OneDrive
onedrive.live.com
960.94 MB file on MEGA
mega.nz
I have spoken to the manufacturer and they have sent me a recovery, I am attaching it as well.
1.01 GB file on MEGA
mega.nz
What is different between #11  post? Both them is update from recovery Android menu like you said?
I have problem with wanbo t6 max i want to connect my phone to projector (cast screen)
But can't find any app for this
Before i buying the t6 max , i have a x1 pro and use Miracast official app for cast and work fine, but in t6 max no have options for this
poopoojy said:
I have problem with wanbo t6 max i want to connect my phone to projector (cast screen)
But can't find any app for this
Before i buying the t6 max , i have a x1 pro and use Miracast official app for cast and work fine, but in t6 max no have options for this
Click to expand...
Click to collapse
Using Eshare app built-in
elmartin7 said:
I have spoken to the manufacturer and they have sent me a recovery, I am attaching it as well.
1.01 GB file on MEGA
mega.nz
View attachment 5606887
Click to expand...
Click to collapse
I tried, both of them working, its latest FW 20200419. Im looking solution to make custom recovery from it
oldman20 said:
Using Eshare app built-in
Click to expand...
Click to collapse
Thank you
i install the Eshare but have lag and disconnect issues...
Have alternative app? Work fine Like miracast in x1 pro?
anyone know how to boot into stock recovery? or success connect adb? i tried OK+HOME and OK+BACK but not work!
Hi guys, I bought a Wanbo T6 Max, for the price it's a great entry-level projector. However, some apps like Star+ and HBOmax do not have sound. I think it's a surround codec fault. Because for example when I put an old episode of Simpsons the sound works, but when it is a new episode (with surround sound) there is no sound. The projector doesn't have any sound system settings... Has anyone managed to update via flash drive?
Thank you for your attention!
Hello, I have T6 Max. I was able to use stremio with no problem. But any video I tried to play was pixelated netflix or with usb stick... Does not matter the resolutıon. Like really badly pixelated. Youtube videos were okay if vp9 is selected as codec but avc videos were pixelated too. I returned it to the factory settings because it was getting a little bit slow.
After the factory reset, now all the videos on stremio are pixelated too. The only thing that's watchable is Youtube. Did anyone experience a problem like this before? Is there a way to fix it or I have a faulty product?