Develop Bugs

[GUIDE]The Easy Way to Port any ROM E-97X to your E-97X

DISCLAIMER: I AM NOT RESPONSIBLE FOR ANYTHING YOU DO TO YOUR PHONE WHILE USING ANY OF THE INFORMATION LOCATED BELOW. IF YOU DO NOT UNDERSTAND WHAT IS BEING DONE, PLEASE DO NOT TRY ANYTHING DONE HERE!
1) First of all you need is to Root your devices and unlock your Bootloader. (Belive me I tried to Customize without Unlocking BL and got HardBricked, yeah I know I've learnt by the hard way xD)
2) Make a Nanadroid Backup in case you mess up with your phone. To do it, you need to reboot into Recovery (Vol Up + Power --> After that press twice Volume Down and press Power Button. Then click "backup and restore" --> "backup" and continue.
3) Choose the rom (CRom) you want and also make sure it's compatible with your device. Do some research, in many cases the camera is the indicator if it's compatible or not (13M or 8M), any way Do some research. Download it and save it in the palce you want to work with it (I've done it all in my phone).
4) If you can get the Original ROM (ORom) from your device get it, it's better to have it, in my case I couldn't get it but I used the files from my device in "/" folder
5) Extract the CRom in to a New Folder (also extract ORom). Browse in the CRom into "system/" and find build.prop and open it with a Text Editor. Then open from your ORom the build.prop (located in "/system/" in your device or in "system/" in the ORom you downloaded) and here is the important thing. From ORom build.prop Copy the exact values of ro.product.model, ro.product.name, ro.build.description and ro.buildfingerprint and replace them in the CRom Build.prop. It's very important to replace this so your device could get the update fine. Zip it again and save it, it's ready to flash it.
6) Then you need the modem.img, try to find it in http://downloads.codefi.re/houstonn/lgog/modem (Thanks to CodeFire Team), or try to get it from Your device, The dir is "/dev/block/plataform/msm_sdcc.1/by-name/" and there will be 3 files you need to copy "modem", "modemst1" and "modemst2". If you just have "modem" copy it and that's it. Also if you want to preserve your APN list, go to directory "/system/etc/" and copy apns-conf.xml.After flashing put those files again in their places and set up the correct Permissions table (Modem lrwxrwxrwx, apn-conf.xml -rw-r--r--)
**UPDATE: Don't worry to much for the baseband , I was doing some research and found that many baseband are the same for many variants. On the back of the phone find the FCC ID which is the one that determines the baseband frequencies of the device. Google it and check which devices have the same FCC ID as yours. Then download the modem.IMG and flash it **
7) Follow the instuctions for installation of the ROM, and after flashing the CRom that you've created and gapps, if you could found your modem.zip from Codefire team, then flash it.
8) And Voila! Your Custom-Custom ROM it's flashed! Wait for the first time booting and check if everithing is ok! If you're locked out of 4G/3G/2G check the APN's configuration to match with your carrier's. Hope it help you! :fingers-crossed:
**IMPORTANT** Remember to do this everytime you Update the ROM
If you found this usefull, don't forget to click the "Thanks" button

So, what you are saying is, it is possible to use the sprint ROMs on our devices? :highfive:

Yes, everything is possible with a little bit of tweaking
By now I've tested with my E976 ThinkingBridge and CM ROMs and everything is running like Charm
Sent from my LG-E976 CM 10.1 using xda app-developers app

Hey there. I have a f180s and was trying to install cm10 but i encountered an error on build prop. Can u upload a copy of your build prop in .txt form i could download? I'll edit my build prop to match e975. Gracias.

never mind. done. thank you.

Thank you so much, you should post this in the android development section to have more impact

Some weeks a go I got my E976 (mexico) and when I first came to the optimus g forum here I was totally disappointed.. There are so many variants!!. I wasn't sure if I can install any of these roms on my phone. I think you've helped me to find the answer. Thanks!!
Enviado desde mi LG-E976 usando Tapatalk 2

tommyrumbler said:
never mind. done. thank you.
Click to expand...
Click to collapse
Sorry for not answering, good it worked
You're welcome my friend!
manuetsia said:
Thank you so much, you should post this in the android development section to have more impact
Click to expand...
Click to collapse
You're welcome my friend! I wish I could post over there... But I still need to post a little bit more to get access As soon as it's possible I will move the post to developer forum and post a little tool for simplifying the process wait for it
mutesperm said:
Some weeks a go I got my E976 (mexico) and when I first came to the optimus g forum here I was totally disappointed.. There are so many variants!!. I wasn't sure if I can install any of these roms on my phone. I think you've helped me to find the answer. Thanks!!
Enviado desde mi LG-E976 usando Tapatalk 2
Click to expand...
Click to collapse
You are welcome my friend :highfive:
Sent from my LG-E976 CM 10.1 using xda app-developers app

Hi, I got an E976
Let's say the ROM's modem works ok, what's the difference if I just leave the Custom ROM made for E975 build.prop untouched?

pedroren said:
Hi, I got a E976, but I can't find modem.IMG
There's no /system/firmware in mine.
Also tried using the search function of ES File Explorer.
Any suggestions?
Click to expand...
Click to collapse
Yep, I've found the folder, it is "/dev/block/plataform/msm_sdcc.1/by-name/" and there wil be 3 files you need to copy "modem", "modemst1" and "modemst2". If you just have "modem" copy it and that's it. Also if you want to preserve your APN list, go to directory "/system/etc/" and copy apns-conf.xml.
After flashing, put those files again in their places and set up the correct Permissions (Modem lrwxrwxrwx, apn-conf.xml -rw-r--r--)
pedroren said:
Hi, I got an E976
Let's say the ROM's modem works ok, what's the difference if I just leave the Custom ROM made for E975 build.prop untouched?
Click to expand...
Click to collapse
Basically is to preserve the integrity and information of your device. The first time you flash it you need to customize the builp.prop because the update.zip would fail to install the custom rom. After that, you can flash it within problems, but the ro.product.model, ro.product.name, ro.build.description and ro.buildfingerprint , especially the last two will be replace with the info of an other device, and this could bring you problems with your device, thats why you need to customize it each time you update your rom. If you want to modify your device to make it an E-975, the best option is to make a clean install and flash it with a E975.kdz with the exact baseband(as it's mention on the post, many variants have the same baseband). Hope it help you

you really do not need to flash an e975 rom via kdz updater to your e97x device just to flash a rom intended for a different device. follow guide below and you can flash any rom to you e97x :
You do this with 7-Zip/WinRAR
Note: DO NOT EXTRACT ROM!
In the ROM go to:
/META-INF/com/google/android/updater-script
1)Open updater-script with a script editor such as notepad/notepad++ (makes things 10x easier), or gedit if you use linux
2)Delete the first line of code (all the way up to the first semicolon you see) and delete the first semi-colon as well

tommyrumbler said:
you really do not need to flash an e975 rom via kdz updater to your e97x device just to flash a rom intended for a different device. follow guide below and you can flash any rom to you e97x :
You do this with 7-Zip/WinRAR
Note: DO NOT EXTRACT ROM!
In the ROM go to:
/META-INF/com/google/android/updater-script
1)Open updater-script with a script editor such as notepad/notepad++ (makes things 10x easier), or gedit if you use linux
2)Delete the first line of code (all the way up to the first semicolon you see) and delete the first semi-colon as well
Click to expand...
Click to collapse
Just to clarify, the part of flashing through KDZ is to convert a E97X into a NewOutOfBox E975 as it is said in the reply, and it's true, you can delete the ROM verifier line (1st one) if you just want to install the rom within preserving the info of your device in the build.prop .

MODEM
Que tal amigo yo de nuevo, me podrías pasar la imagen del MODEM, de Telcel, ya que la perdí y no la he encontrado en la red. Lo que pasó fue que Flashee con valores Bell (Canada) y si agarra lo de Telcel (sólo para hablar, más no los datos) y tampoco el WIFI.
Saludos y Gracias.

Hi there, Thanks for the guide, it is very helpfull.
I have an E987 (south america's version of lg optimus g, without LTE), i followed your guide but in twrp i'm still getting error (7), in build.prop there is many lines that says e975
For example
ro.build.display.id=pac_e975-userdebug 4.2.2 JDQ39E eng.faust.20130603.184321 test-keys
ro.product.device=e975
ro.build.product=e975
ro.cm.device=e975
ro.pacrom.version=e975_PAC_JB_4.2.2-v22.3.0_20130603-184321
ro.modversion=pa_e975-3.15-03^b2013-184321
ro.aokp.version=e975_jb-mr1_milestone-1
ro.cm.version=10.1.0-RC4-e975
should i change all of them into e987 in order to work?, my device is white in the back, it has no FCC ID text, and it IS an optimus G, not a g pro.
What should i do???
Thanks in advance!!!
P.S. I couldn't find modem.img on the web, so i copied modem modemst1 modemst2 from my device. Thats right? i attach build.prop from my original firmware (btw i couldn't find the flashable file)
P.S 2: I should be able to port Sprint's LG optimus G roms aswell?

Hi, amigo. This would work on the LG E-977?

EddGu said:
Hi, amigo. This would work on the LG E-977?
Click to expand...
Click to collapse
I´ve tested it on my E976 and everything ok. Should work on your E977... try it.

So you say to use any Rom from any OG Modell are just some build.prop edit's??

Hello, my device is the E977, I flashed the Paranoid Android ROM for the E975 and everything works great except that I have no signal, I downloaded the modem from the link you provided and flashed the E977 modem but still got no 3G or even EDGE, what am I doing wrong? I tried the rom Pacman v23 for the E975 and I didnt even had to flash any modems, it worked on my E977 just fine, why this one doesnt? help please

roymouse said:
Que tal amigo yo de nuevo, me podrías pasar la imagen del MODEM, de Telcel, ya que la perdí y no la he encontrado en la red. Lo que pasó fue que Flashee con valores Bell (Canada) y si agarra lo de Telcel (sólo para hablar, más no los datos) y tampoco el WIFI.
Saludos y Gracias.
Click to expand...
Click to collapse
Hi friend!... I have the same problem on my E976. I flashed a stock rom (kdz) form europe, and then i´ve flashed modems from BELL (canada) and ATT (USA), these two are good to get 3G and HSPA, but not LTE. Links are below: (flasheable through CWM)
I don´t know if its a problem ob baseband or the ROM doesn´t admit LTE connection... does anyone knows what´s the problem here?
http://downloads.codefi.re/houstonn/lgog/modem/Canadian/cwm-lgog_e973-JB-bell_NEW_modem.zip
http://downloads.codefi.re/houstonn/lgog/modem/ATT/cwm-lgog_e970_20j-att_jb.modem.zip
Traduccion:
Hola Amigo!, tengo el mismo problema que tu en mi E976. Tuve que flashear un rom stock libre de europa y no me daba señal, asi que he flasheado los modems de ATT y BELL y han funcionado perfecto para 3G y HSPA, pero no para LTE. Te dejo los links (se pueden flashear por CWM).
Lo que no sé es si es problema de la baseband o el ROM no admite la conexión LTE... alguien sabe cual puede ser el problema aqui?.
---------- Post added at 12:47 PM ---------- Previous post was at 12:41 PM ----------
Would be great if someone in stock JB ROM (for E976, mexico) could upload the modem files so we can fix these problems... anyone??

mutesperm said:
Hi friend!... I have the same problem on my E976. I flashed a stock rom (kdz) form europe, and then i´ve flashed modems from BELL (canada) and ATT (USA), these two are good to get 3G and HSPA, but not LTE. Links are below: (flasheable through CWM)
I don´t know if its a problem ob baseband or the ROM doesn´t admit LTE connection... does anyone knows what´s the problem here?
http://downloads.codefi.re/houstonn/lgog/modem/Canadian/cwm-lgog_e973-JB-bell_NEW_modem.zip
http://downloads.codefi.re/houstonn/lgog/modem/ATT/cwm-lgog_e970_20j-att_jb.modem.zip
Traduccion:
Hola Amigo!, tengo el mismo problema que tu en mi E976. Tuve que flashear un rom stock libre de europa y no me daba señal, asi que he flasheado los modems de ATT y BELL y han funcionado perfecto para 3G y HSPA, pero no para LTE. Te dejo los links (se pueden flashear por CWM).
Lo que no sé es si es problema de la baseband o el ROM no admite la conexión LTE... alguien sabe cual puede ser el problema aqui?.
---------- Post added at 12:47 PM ---------- Previous post was at 12:41 PM ----------
Would be great if someone in stock JB ROM (for E976, mexico) could upload the modem files so we can fix these problems... anyone??
Click to expand...
Click to collapse
I did it. Send me a PM.
Sent from my LG-E975 using xda premium

Moto z2 force telcel mexico

Hi everybody, plz someone have this file NASH_AMX_NPX26.122-69_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.rar, i need it to return to stock my moto z2. Thanks

You can use unbranded retail SW linked in other thread with no issues at all...

Thanks but i need it, i have a problem, im trying to bypass the frp via Moto FRP from iguru4life but always nothing happen in the screen, when the program say that i need to accept enable usb debugging nothing happen, one technician try to make it with sigma box, eft dongle, ultimate multi tools, and nothing happen when they click on enable adb in the screen nothing happen, someone know what i need it. Thanks

bsforte said:
Thanks but i need it, i have a problem, im trying to bypass the frp via Moto FRP from iguru4life but always nothing happen in the screen, when the program say that i need to accept enable usb debugging nothing happen, one technician try to make it with sigma box, eft dongle, ultimate multi tools, and nothing happen when they click on enable adb in the screen nothing happen, someone know what i need it. Thanks
Click to expand...
Click to collapse
I don't get the relation between FRP issue and stock SW...
Have you tried to flash the version I indicated to you using complete provided flash sequence?
Are you bootloader unlocked?
EDIT: anyway there is no frp.bin on mentioned stock fw... :/

Yes i fla**** but nothing happen, i have bootloader locked.

bsforte said:
Yes i fla**** but nothing happen, i have bootloader locked.
Click to expand...
Click to collapse
As I imagined.... you asked on OP for a firmware but it is not a solution for FRP issues...
Have you tried any Moto FRP unlock solution?
Don't you have the needed password?

Yes i tried many solutions, but the problem when the instructions say click yes on the screen to enable usb debugging, nothing happen in the screen of the cellphone, no ask about enable usb debug, dont show nothing.

bsforte said:
Hi everybody, plz someone have this file NASH_AMX_NPX26.122-69_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.rar, i need it to return to stock my moto z2. Thanks
Click to expand...
Click to collapse
What ROM did you install, instead of AMX

@bsforte @rdkai @enetec
I'm also looking for a solution to bypass FRP due to unable to remember or recover forgotten password.
Were you able to bypass FRP on Moto Z2 Force "NASH" ? @enetec Why is firmware not the solution for FRP bypass?
How is this FRP implemented persistently, is it a file on the internal flash disk, which, if the file exists, the rom code then prompts the user to login to g account?

anyone solved the FRP removal on z2 force?

There you go (Aquí tienes)
https://rsdsecure-cloud.motorola.co...742320&Signature=IJPT3ohg46tjjj2tRWuF/Y9Ld1o=

Hi,
I'm getting Access denied, can you share it from another place?
Thank you.

[email protected] said:
Hi,
I'm getting Access denied, can you share it from another place?
Thank you.
Click to expand...
Click to collapse
https://drive.google.com/open?id=1hAshe8f1RYNS4xD7xeWGrSFSi9_eXsMc There you go

Marcowe said:
https://drive.google.com/open?id=1hAshe8f1RYNS4xD7xeWGrSFSi9_eXsMc There you go
Click to expand...
Click to collapse
de casualidad tendras el firmware de telcel pero el de Andriod 8.0?
Saludos
By any chance do you hace the Telcel firmware but Android 8.0?
Regards

williegomezt said:
de casualidad tendras el firmware de telcel pero el de Andriod 8.0?
Saludos
By any chance do you hace the Telcel firmware but Android 8.0?
Regards
Click to expand...
Click to collapse
Claro que sí
Aquí lo tienes:
https://rsdsecure-cloud.motorola.co...312269&Signature=R8aYawlFoct68ARt1c0rnI0prX0=

Marcowe said:
Claro que sí
Aquí lo tienes:
https://rsdsecure-cloud.motorola.co...312269&Signature=R8aYawlFoct68ARt1c0rnI0prX0=
Click to expand...
Click to collapse
Muchas gracias.

Marcowe said:
Claro que sí
Aquí lo tienes:
https://rsdsecure-cloud.motorola.co...312269&Signature=R8aYawlFoct68ARt1c0rnI0prX0=
Click to expand...
Click to collapse
Hola Marcowe, espero se pueda poner en otra ruta como el anterior.
Hi Marcowe, I hope that you can place it in another place like the other one.
Thanks!
Regards
[email protected]

[email protected] said:
Hola Marcowe, espero se pueda poner en otra ruta como el anterior.
Hi Marcowe, I hope that you can place it in another place like the other one.
Thanks!
Regards
[email protected]
Click to expand...
Click to collapse
existe diferencia de esta rom con la retail?

Basically, it's free of the carrier dependencies shu as some applications that you can't uninstall, another one and maybe the most troublesome for some of us is that when Motorola makes a new FW release we need to wait until the carrier gives the ok and that takes much time for Telcel

Marcowe said:
Claro que sí
Aquí lo tienes:
https://rsdsecure-cloud.motorola.co...312269&Signature=R8aYawlFoct68ARt1c0rnI0prX0=
Click to expand...
Click to collapse
Sorry, but the file has already expired on March 17th, 2018 based on the timestamp "Expires=1521312269" param, it only downloads 270 MB of the file and stops everytime because of that.
Perdón, pero el archivo ya expiró el 17 de marzo de 2018, basándose en el parámetro con timestamp: "Expires=1521312269", solo descarga 270 MB del archivo y se detiene debido a eso.

How to install Android 8.1 on the Moto G5s model XT1790?

Hi, I have a Motorola Moto G5S, model XT1790. As much as I look for how to update the system I can not find any compatible firmware. If anyone knows or has managed to update the Android in this mobile model, I would appreciate it if you can help me.

joseulloa said:
Hi, I have a Motorola Moto G5S, model XT1790. As much as I look for how to update the system I can not find any compatible firmware. If anyone knows or has managed to update the Android in this mobile model, I would appreciate it if you can help me.
Click to expand...
Click to collapse
You have to wait for the update, or else use this method (which is unofficial and might void your warranty): https://forum.xda-developers.com/moto-g5s/development/rom-android-8-1-0-oreo-stock-firmware-t3845501

Hola yo tengo el mismo modelo
Si el que te respondió arriba , con ese método vía twrp lo instale y todo bien hasta ahora perfecto, suerte bro

IMEI problem after downgrade

I was testing the January update in the phone a couple days ago but it had a lot of bugs (maybe it didn't install correctly via OTA) so I tried to downgrade mi phone to the November patch, it worked but now I don't have neither of my 2 IMEIs. Can I do something to fix it?
I would appreciate a lot your help people from the internet
Thanks for reading!

Polahr said:
I was testing the January update in the phone a couple days ago but it had a lot of bugs (maybe it didn't install correctly via OTA) so I tried to downgrade mi phone to the November patch, it worked but now I don't have neither of my 2 IMEIs. Can I do something to fix it?
I would appreciate a lot your help people from the internet
Thanks for reading!
Click to expand...
Click to collapse
did you try to update again to january patch? had this problem only with my s6 before, i think flashing stock image again solved it. hope you did not brick your device

Polahr said:
I was testing the January update in the phone a couple days ago but it had a lot of bugs (maybe it didn't install correctly via OTA) so I tried to downgrade mi phone to the November patch, it worked but now I don't have neither of my 2 IMEIs. Can I do something to fix it?
I would appreciate a lot your help people from the internet
Thanks for reading!
Click to expand...
Click to collapse
to fix sim cards try this https://forum.xda-developers.com/showpost.php?p=78736646&postcount=195

android 9
Polahr said:
I was testing the January update in the phone a couple days ago but it had a lot of bugs (maybe it didn't install correctly via OTA) so I tried to downgrade mi phone to the November patch, it worked but now I don't have neither of my 2 IMEIs. Can I do something to fix it?
I would appreciate a lot your help people from the internet
Thanks for reading!
Click to expand...
Click to collapse
Me paso lo mismo exactamente, la única solución hasta el momento fue actualizar nuevamente a la ultima versión de android 9 la 10.0.3 de enero y volvió a funcionar correctamente
a la espera de otra solución ya que no me gusta android 9 :crying::crying:
Saludos espero te sirva igual que ami

TWRP
eremitein said:
to fix sim cards try this https://forum.xda-developers.com/showpost.php?p=78736646&postcount=195
Click to expand...
Click to collapse
Hey!, thanks for the suggestion, but that method requires TWRP and I'm currently unable to install it yet. Which method worked for you to install TWRP?

N4RC0X1X said:
Me paso lo mismo exactamente, la única solución hasta el momento fue actualizar nuevamente a la ultima versión de android 9 la 10.0.3 de enero y volvió a funcionar correctamente
a la espera de otra solución ya que no me gusta android 9 :crying::crying:
Saludos espero te sirva igual que ami
Click to expand...
Click to collapse
Lo flashee nuevamente pero siguen sin aparecer los IMEI :/

Polahr said:
Hey!, thanks for the suggestion, but that method requires TWRP and I'm currently unable to install it yet. Which method worked for you to install TWRP?
Click to expand...
Click to collapse
solution)
https://forum.xda-developers.com/showpost.php?p=78687212&postcount=25

How To Guide MOTO G60/40F STOCK ROM FLASH GUIDE

HOW TO FLASH STOCK ROM FOR MOTO G60 / MOTOG40F​
REQUIREMENTS
TAKE BACKUP I WILL NOT BE RESPONCIBLE FOR ANY DATA LOSS
MOTO G60 / 40F DEVICE
Working Internet
PC
#METHOD 1 : Flashing Through RSA tool by Motorola ​(Sometimes RSA do not detect the firmware automatically e.g. when you come from any custom rom or gsi or port hence in that case go with method two)
Step 1 Download and install RSA or LMSA tool in PC
Step 2 Put device into bootloader mode and connect to PC, RSA tool will automatically detect device and suggest you to download correct firmware for your device.
Step 3 After downloading firmware, click on START rescue
Step 4 Enjoy stock rom
#METHOD 2 : Direct Flashing ​
Step 1 : Download the firmware for your device Here
(Many variants are available there such as retin and retail choose according your machine )
Step 2 : Put device into bootloader mode and connect to PC
Step 3 : Download and put Flash Script .Bat into the folder of your firmware ( Download here )
Step 4 : Let it complete the flashing process and at end you press any key to reboot your phone
Discussion : Here
Updates : Here
# Credits
Guide brought to you by : Sach Boi
Resources in this guide : Motorola Stock Files and RSA or LMSA tool
Server : Lolinet mirror servers

Just one thing I wanted to add.
If you're trying to go back to stock ROM after flashing a custom ROM...which is probably the case for most of the users reading this, LMSA might not automatically detect the device. So...you'll have to attempt to do it by entering the IMEI. So my advice would be having the IMEI close by in case you need it.

im getting android corrupt try again ,factory reset option. i already reset it but it goes back to try again. used LMSA with imei
EDIT: Fixed tried fastboot -w then fastboot earse userdata , rebooted works fine

I have not unlocked my bootloader. My phone is in stock rom Android 12. Can I use this method to downgrade to Android 11?

Capapp said:
I have not unlocked my bootloader. My phone is in stock rom Android 12. Can I use this method to downgrade to Android 11?
Click to expand...
Click to collapse
No ! And make sure to never re-lock your bootloader once you unlock it.

sarveshmeena said:
No ! And make sure to never re-lock your bootloader once you unlock it.
Click to expand...
Click to collapse
So will it work if i unlock my bootloader? I want to go back to Android 11....

Capapp said:
So will it work if i unlock my bootloader? I want to go back to Android 11....
Click to expand...
Click to collapse
Yes it'll. Join https://t.me/MotoG60. you'll get required files to do so.

sarveshmeena said:
Yes it'll. Join https://t.me/MotoG60. you'll get required files to do so.
Click to expand...
Click to collapse
Thanks, I'll try this after unlocking my bootloader.

sarveshmeena said:
No ! And make sure to never re-lock your bootloader once you unlock it.
Click to expand...
Click to collapse
Hello friend. So, I have this custom ROM and I'm going back to STOCK ROM and I want to re-lock bootloader. Can't anymore? Are there risks? I saw in other topics blocking again with fastboot oem lock.

Yes, you can.
Yes, there are risks.
I've already done it twice on this model and countless times on other models. Yes, you CAN brick your phone. Doesn't mean that you have to! Just do it right from the beginning and you should be fine.

arsradu said:
Sim você pode.
Sim, há riscos.
Já fiz duas vezes neste modelo e inúmeras vezes em outros modelos. Sim, você PODE bloquear seu telefone. Não significa que você tem que! Basta fazê-lo desde o início e você deve ficar bem
Click to expand...
Click to collapse
Thanks again, friend!

Ewer_B said:
Thanks again, friend!
Click to expand...
Click to collapse
you're welcome. I was afraid to try this after reading so many horror stories about locking the bootloader on this phone. But then I decided to give it a try anyway. And it was ok.
Just have to do it carefully. Use LMSA to Rescue (reflash stock ROM) the device. Make sure you can boot BEFORE locking the bootloader. And, optionally, you can also do an extra wipe data from Recovery (this way, you can also make sure you're using the STOCK recovery). After that, you can go ahead and lock the bootloader using command:
fastboot oem lock
That's it. Good luck!

arsradu said:
de nada. Eu estava com medo de tentar isso depois de ler tantas histórias de terror sobre o bloqueio do bootloader neste telefone. Mas então eu decidi tentar de qualquer maneira. E estava tudo bem.
Só tem que fazer com cuidado. Use LMSA para resgatar (reflash stock ROM) o dispositivo. Certifique-se de que você pode inicializar ANTES de bloquear o bootloader. E, opcionalmente, você também pode fazer uma limpeza extra de dados da Recuperação (assim, você também pode se certificar de que está usando a recuperação STOCK). Depois disso, você pode prosseguir e bloquear o bootloader usando o comando:
bloqueio de inicialização rápida
É isso. Boa sorte!
Click to expand...
Click to collapse
haha! Exactly that was my fear too. That's why you must have seen several questions in different threads . The fear was present, but reading other responses and especially yours, encouraged more to do the procedure. Now everything is working perfectly. Custom ROMs are great, but I use NFC a lot for payments and Netflix for example, which don't work on bootloaders unlocked (Here's a tip for anyone installing Custom ROMS). Thanks again!

Ewer_B said:
haha! Exactly that was my fear too. That's why you must have seen several questions in different threads . The fear was present, but reading other responses and especially yours, encouraged more to do the procedure. Now everything is working perfectly. Custom ROMs are great, but I use NFC a lot for payments and Netflix for example, which don't work on bootloaders unlocked (Here's a tip for anyone installing Custom ROMS). Thanks again!
Click to expand...
Click to collapse
The NFC payments is one of the reasons I switched back to stock. For NFC payments, the problem might actually be on the ROM itself... I'm still trying to figure this out myself. But yes, Netflix wants a locked bootloader... I'm not sure there's a workaround for that. But NFC payments do generally work with custom ROMs. They just don't work with the current ROMs we have for G60.
Maybe...maybe one they, this will also be fixed.

arsradu said:
Os pagamentos NFC são uma das razões pelas quais voltei ao estoque. Para pagamentos NFC, o problema pode estar na própria ROM ... Ainda estou tentando descobrir isso sozinho. Mas sim, a Netflix quer um bootloader bloqueado... Não tenho certeza se há uma solução alternativa para isso. Mas os pagamentos NFC geralmente funcionam com ROMs personalizados. Eles simplesmente não funcionam com as ROMs atuais que temos para o G60.
Talvez... talvez um deles, isso também será consertado.
Click to expand...
Click to collapse
What good news! I believe that when the NFC payment works, I will go back to the Custom ROM. That would already be a good reason to go back to Custom. Netflix can wait , I don't really care.

Ewer_B said:
What good news! I believe that when the NFC payment works, I will go back to the Custom ROM. That would already be a good reason to go back to Custom. Netflix can wait , I don't really care.
Click to expand...
Click to collapse
Same here. That's why I'm hoping it can be fixed... But in the meantime, I switched back to stock ROM and locked the bootloader.