Hi, i brought head unit ES9015V from Erisin. i would like to root/install custom rom, but i can't identify it. Maybe some one could help me.
Model number : rkpx2
Screen :1024*600 HD
CPU : RK3188
MCU version number : LM-AND841PX-8015V1.15
Android version: 4.4.4
Kernel version:3.0.36+
[email protected] #145
Build number
PX2_LEIMA_DAZHONG-V1.00.0043.00.00-2015-07-30
there is link from Erisin www erisinwholesale.com/special-car-dvd/vw/erisin-es9015v-8-vw-android-444-car-dvd-gps-413.html
Thanks.
Pretty simple you need the ROM for an RK3188 with the screenresolution 1024x600.
If you go to Malaysk opened thread you will find your needed firmware.
Gesendet von meinem C6903 mit Tapatalk
9_Mad-Max_5 said:
Pretty simple you need the ROM for an RK3188 with the screenresolution 1024x600.
If you go to Malaysk opened thread you will find your needed firmware.
Gesendet von meinem C6903 mit Tapatalk
Click to expand...
Click to collapse
Hi thanks for response,
but is my device MTCB-Device, because my MCU version number is LM-AND841PX-8015V1.15 as i see all MCU for Malaysk starts with MTCB and mine starts with LM, it confuses me a little what is the worst scenario if i install wrong Malaysk firmware ( i mean RK3188 and 1024x600 selected properly but not MCU)?
Worst case is a hard brick.
Normaly this firmware should work but maybe you should ask Malaysk.
No, its NOT an MTCB device, MTCB would appear at the start of the MCU number if it was an MTCB unit, so youre in the wrong thread.
Not even heard of that one before so cant offer any advice on what type it is I m afraid.
Hello
I recently bought the same device.
What an mistake was, like I know now.
And I got stuck at the same problem but I'm not pretty sure if it is an RK3066 or RK3188 unit.
So I thought about it would it be possible to use another RK3188 SoM-Card with an MTCB MCU in the same device?
That would make it possible to use Malayskis ROMs, I think.
Gesendet von meinem E6653 mit Tapatalk
I just know now that my idea was wrong to change the SoM.
Because the MCU is on antoher Board.
But what would be if the MCU-Hardware is the same and I just install the MTCD-MCU-Software.
After that it should be possible to install the new MTCD-Software or am I wrong?
Hi.
I have the same model.
Do you know if you can do root?
A greeting.
Hola.
Yo tengo el mismo modelo.
¿sabeis si se puede hacer root?
Un saludo.
Dudas!!!
Yo también tengo el ES9015v y querría saber si alguien ha conseguido ROOT, sabe como entrar en recovery y así poder cambiar la ROM a este modelo
I also have the ES9015v and would like to know if anyone has gotten ROOT, you know how to enter recovery and be able to change the ROM to this model
root unit with Kingroot (you will need an internet connection)
Install Supersu-me.
https://androidmtk.com/replace-kinguser-with-supersu
This units have NO user accessible recovery!
If you mess with system files it will turn into a soft brick!
The only way to fix it is with a rom installation.
There is no roms available to the public.
I have A single din unit and i soft bricked it after rooting it and installing some xposed modules.
What saved my unit was after much negotiation etc, i was able to acquired the rom and mcu update for it.
a few other points,
Current roms in the xda are not compatible with this units even though they have the same chips.
The firmware is riddled with bugs, this things are running test firmwares.
dvr crashes every 5 minutes.
Any launcher you install gets disabled after a reboot.
Bluetooth streaming crashes the Bluetooth stack and only a reset makes work again.
Danke. Sie können Firmware hochladen? Bitte
Thanks for the reply.
I try it and I tell you that this has been
Gracias, por la respuesta.
Lo pruebo y os cuento que tal ha ido
donpuen said:
Thanks for the reply.
I try it and I tell you that this has been
Gracias, por la respuesta.
Lo pruebo y os cuento que tal ha ido
Click to expand...
Click to collapse
Have you found any solution on installing malaysk's roms?
Erisin ES9015V
hi there
where I can find the original MCU from Erisin ES9015V??
thanks for help
Related
Hi all,
I have HTM A9500 chinese phone with Spreadtrum 6820 cpu. I tried to install a new firmware after rooting it. But the phone was bricked. Now I installed another firnware with ResearchDownloader and finally the phone worked but the screen is all white. Nothing appears on the screen.
I need the original firmware for the phone but I can't find it anywhere. Has anybody made a backup (.pac) file for this phone? Who can share it? I really need your help.
If I have that file I can save my phone. Please help!:angel:
This is the phone:
http://www.aliexpress.com/item/HTM-...citive-touch-HD-screen-mobile/1334730551.html
ultrakif said:
Hi all,
I have HTM A9500 chinese phone with Spreadtrum 6820 cpu. I tried to install a new firmware after rooting it. But the phone was bricked. Now I installed another firnware with ResearchDownloader and finally the phone worked but the screen is all white. Nothing appears on the screen.
I need the original firmware for the phone but I can't find it anywhere. Has anybody made a backup (.pac) file for this phone? Who can share it? I really need your help.
If I have that file I can save my phone. Please help!:angel:
This is the phone:
http://www.aliexpress.com/item/HTM-...citive-touch-HD-screen-mobile/1334730551.html
Click to expand...
Click to collapse
The one you posted the pic of is an MTK one are you sure your phone is of Spreadturm Chipset??
a9500
is0l4ted said:
The one you posted the pic of is an MTK one are you sure your phone is of Spreadturm Chipset??
Click to expand...
Click to collapse
hello
did you find any thing any pac file ??
i need the same file
thanks
I am sure that it is Spreadtrum. The info at aliexpress is wrong.
is0l4ted said:
The one you posted the pic of is an MTK one are you sure your phone is of Spreadturm Chipset??
Click to expand...
Click to collapse
Tambien necesito Rom .pac para HTM A9500
ultrakif said:
I am sure that it is Spreadtrum. The info at aliexpress is wrong.
Click to expand...
Click to collapse
este movil lleva un procesador spreadtrum de 1.0 Ghz , y android 2.3 (en el menu de Acerca del telefono pone que lleva una quad-core y android 4.0 aparte que tambien pone que lleva una imagen de mtk cosa que tambien es mentira), la cuestion es que necesito alguna rom ,,
Estas son las especificaciones reales de dicho trasto.
Feature
Spreadtrum 6820 platform, frequency: 1.0GHz,
Platform equipped with Andriod 2.3.6
5.0 FWVGA-HD-LCD, capacitive screen laminating technology, highlighting the product quality
Dual camera, front camera, 300000, 3000000 rear camera, support flash
5.0 inch capacitive multi-touch screen
Memory：4GB（ROM）+512MB（RAM）
Slim ID, the thickness of only 9.5mm
Technical Specifications
Network frequency
GSM：850/900/1800/1900 MHz
Mobile platform
Spreadtrum 6820 platform
Operating system
Andorid 2.3.6
Phone frequency
1.0GHz
Size
142.5*72.5*9.5mm
Weight
160g（Nose）
Screen parameter
5.0-inch high-definition LCD FWVGA
Touchscreen
Panel touch keys
Standard
Side buttons
Side switch / Side Volume + / - buttons
Extended Memory
T_Flash card, support up to 32GB
Webcam
Dual camera, front 30W, Rear 300W, support flash
SIM card
Dual SIM
Internet formats and rates
GPRS（53.6Kbps)
Gracias y felices fiestas
same here!
any 1 could help us ?
Hi everybody, plz someone have this file NASH_AMX_NPX26.122-69_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.rar, i need it to return to stock my moto z2. Thanks
You can use unbranded retail SW linked in other thread with no issues at all...
Thanks but i need it, i have a problem, im trying to bypass the frp via Moto FRP from iguru4life but always nothing happen in the screen, when the program say that i need to accept enable usb debugging nothing happen, one technician try to make it with sigma box, eft dongle, ultimate multi tools, and nothing happen when they click on enable adb in the screen nothing happen, someone know what i need it. Thanks
bsforte said:
Thanks but i need it, i have a problem, im trying to bypass the frp via Moto FRP from iguru4life but always nothing happen in the screen, when the program say that i need to accept enable usb debugging nothing happen, one technician try to make it with sigma box, eft dongle, ultimate multi tools, and nothing happen when they click on enable adb in the screen nothing happen, someone know what i need it. Thanks
Click to expand...
Click to collapse
I don't get the relation between FRP issue and stock SW...
Have you tried to flash the version I indicated to you using complete provided flash sequence?
Are you bootloader unlocked?
EDIT: anyway there is no frp.bin on mentioned stock fw... :/
Yes i fla**** but nothing happen, i have bootloader locked.
bsforte said:
Yes i fla**** but nothing happen, i have bootloader locked.
Click to expand...
Click to collapse
As I imagined.... you asked on OP for a firmware but it is not a solution for FRP issues...
Have you tried any Moto FRP unlock solution?
Don't you have the needed password?
Yes i tried many solutions, but the problem when the instructions say click yes on the screen to enable usb debugging, nothing happen in the screen of the cellphone, no ask about enable usb debug, dont show nothing.
bsforte said:
Hi everybody, plz someone have this file NASH_AMX_NPX26.122-69_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.rar, i need it to return to stock my moto z2. Thanks
Click to expand...
Click to collapse
What ROM did you install, instead of AMX
@bsforte @rdkai @enetec
I'm also looking for a solution to bypass FRP due to unable to remember or recover forgotten password.
Were you able to bypass FRP on Moto Z2 Force "NASH" ? @enetec Why is firmware not the solution for FRP bypass?
How is this FRP implemented persistently, is it a file on the internal flash disk, which, if the file exists, the rom code then prompts the user to login to g account?
anyone solved the FRP removal on z2 force?
There you go (Aquí tienes)
https://rsdsecure-cloud.motorola.co...742320&Signature=IJPT3ohg46tjjj2tRWuF/Y9Ld1o=
Hi,
I'm getting Access denied, can you share it from another place?
Thank you.
[email protected] said:
Hi,
I'm getting Access denied, can you share it from another place?
Thank you.
Click to expand...
Click to collapse
https://drive.google.com/open?id=1hAshe8f1RYNS4xD7xeWGrSFSi9_eXsMc There you go
Marcowe said:
https://drive.google.com/open?id=1hAshe8f1RYNS4xD7xeWGrSFSi9_eXsMc There you go
Click to expand...
Click to collapse
de casualidad tendras el firmware de telcel pero el de Andriod 8.0?
Saludos
By any chance do you hace the Telcel firmware but Android 8.0?
Regards
williegomezt said:
de casualidad tendras el firmware de telcel pero el de Andriod 8.0?
Saludos
By any chance do you hace the Telcel firmware but Android 8.0?
Regards
Click to expand...
Click to collapse
Claro que sí
Aquí lo tienes:
https://rsdsecure-cloud.motorola.co...312269&Signature=R8aYawlFoct68ARt1c0rnI0prX0=
Marcowe said:
Claro que sí
Aquí lo tienes:
https://rsdsecure-cloud.motorola.co...312269&Signature=R8aYawlFoct68ARt1c0rnI0prX0=
Click to expand...
Click to collapse
Muchas gracias.
Marcowe said:
Claro que sí
Aquí lo tienes:
https://rsdsecure-cloud.motorola.co...312269&Signature=R8aYawlFoct68ARt1c0rnI0prX0=
Click to expand...
Click to collapse
Hola Marcowe, espero se pueda poner en otra ruta como el anterior.
Hi Marcowe, I hope that you can place it in another place like the other one.
Thanks!
Regards
[email protected]
[email protected] said:
Hola Marcowe, espero se pueda poner en otra ruta como el anterior.
Hi Marcowe, I hope that you can place it in another place like the other one.
Thanks!
Regards
[email protected]
Click to expand...
Click to collapse
existe diferencia de esta rom con la retail?
Basically, it's free of the carrier dependencies shu as some applications that you can't uninstall, another one and maybe the most troublesome for some of us is that when Motorola makes a new FW release we need to wait until the carrier gives the ok and that takes much time for Telcel
Marcowe said:
Claro que sí
Aquí lo tienes:
https://rsdsecure-cloud.motorola.co...312269&Signature=R8aYawlFoct68ARt1c0rnI0prX0=
Click to expand...
Click to collapse
Sorry, but the file has already expired on March 17th, 2018 based on the timestamp "Expires=1521312269" param, it only downloads 270 MB of the file and stops everytime because of that.
Perdón, pero el archivo ya expiró el 17 de marzo de 2018, basándose en el parámetro con timestamp: "Expires=1521312269", solo descarga 270 MB del archivo y se detiene debido a eso.
What's up! How are you? I am nuvo here if I miss one of your rules I ask you please let me know ... I have a problem with the motor z2 force .. xt1789-05 when flashing via ota to oreo android 8.0 lost base band again lower the NASH_AMX_NPX26.122-69_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
but I realized that the version I need is NPX26.122-69-74 and this NASH_AMX_NPX26.122-69_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml is
NPX26.122-69-14 how can I recover the bandbase? since it does not let me see the imei nor serves the wifi nor the bluetoth I already did flash by several commands NON-HLOS.bin and I do not find the indicated .. someone to help me ??
Hi,
Have you tried flashing complete (no OTA) Oreo retail FW?? that may help you. Here in the forum, there is tread where you can download Oreo retail and try.
Good luck!
Regards
[email protected]
[email protected] said:
Hi,
Have you tried flashing complete (no OTA) Oreo retail FW?? that may help you. Here in the forum, there is tread where you can download Oreo retail and try.
Good luck!
Regards
[email protected]
Click to expand...
Click to collapse
how about first of all thanks for answering and install it and leave me baseband in the same way. I already downloaded several sw and leave the same without wifi any other idea? I restart it from the factory and return the baseband but it marks another baseband that is not giving me this NASH TMO OCX27.109 I found it here in the forums but checking another team of a friend the one I need is this m8998_20207.117.02.41R NRS
Hi Radick_11
Go to this thread: https://forum.xda-developers.com/z2-force/how-to/android-o-variants-t3746862
go to post #9, use the FW recomended and flash using that instructions, I have m8998_20207.117.02.41R NRS baseband, that is in the FW mentioned in that threat.
Ve a ese ling al post #9, usa el FW que te recomienda bajar, y flashealo con las intrucciones que ahi indica, yo tengo la base band m8998_20207.117.02.41R NRS que biene en ese firmware de ese post.
Saludos
[email protected]
[email protected] said:
Hi Radick_11
Go to this thread: https://forum.xda-developers.com/z2-force/how-to/android-o-variants-t3746862
go to post #9, use the FW recomended and flash using that instructions, I have m8998_20207.117.02.41R NRS baseband, that is in the FW mentioned in that threat.
Ve a ese ling al post #9, usa el FW que te recomienda bajar, y flashealo con las intrucciones que ahi indica, yo tengo la base band m8998_20207.117.02.41R NRS que biene en ese firmware de ese post.
Saludos
[email protected]
Click to expand...
Click to collapse
how can I thank you for replying that I'm desperate and I've done everything and I can not find the modem I need to download NASH_RETAIL_8.0.0_OPX27.109-34_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip hoping it would work for me but now since I'm on android 8 I realize that now I need opx27.109-49 that is the compilation that Telcel Mexico manages
Radick_11 said:
how can I thank you for replying that I'm desperate and I've done everything and I can not find the modem I need to download NASH_RETAIL_8.0.0_OPX27.109-34_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip hoping it would work for me but now since I'm on android 8 I realize that now I need opx27.109-49 that is the compilation that Telcel Mexico manages
Click to expand...
Click to collapse
In this post you can find the Oreo Firmware for Telcel Mexico
https://forum.xda-developers.com/showpost.php?p=75957537&postcount=23
En este post puedes encontrar el firmware de Oreo para Telcel Mexico
Saludos
williegomezt said:
In this post you can find the Oreo Firmware for Telcel Mexico
https://forum.xda-developers.com/showpost.php?p=75957537&postcount=23
En este post puedes encontrar el firmware de Oreo para Telcel Mexico
Saludos
Click to expand...
Click to collapse
that such a friend williegomezt indeed that is from Mexico! if it is the compilation that I need, I will load it but still the baseband does not recover me. I have heard that the modem of 7.1.1 has to be inserted, or it will not recover the baseband imei wifi etc, everything that it loses .. I will upload the files with cmd and with umt box without success ..in version 7.1.1 I need the baseband npx.26.122.69.14 what will you bro?
Radick_11 said:
that such a friend williegomezt indeed that is from Mexico! if it is the compilation that I need, I will load it but still the baseband does not recover me. I have heard that the modem of 7.1.1 has to be inserted, or it will not recover the baseband imei wifi etc, everything that it loses .. I will upload the files with cmd and with umt box without success ..in version 7.1.1 I need the baseband npx.26.122.69.14 what will you bro?
Click to expand...
Click to collapse
You have to read the forums, all the information you're looking for is already posted here
https://forum.xda-developers.com/showpost.php?p=75798285&postcount=13
Regards
williegomezt said:
You have to read the forums, all the information you're looking for is already posted here
https://forum.xda-developers.com/showpost.php?p=75798285&postcount=13
Regards
Click to expand...
Click to collapse
I also thought the same bro but as I commented that version and the probe is the BUILD REQUEST INFO:
SW Version: nash_amx-user 7.1.1 NPX26.122-69 74 and I need the BUILD REQUEST INFO:
SW Version: nash_amx-user 7.1.1 NPX26.122-69 14 is the one I can not find anywhere
I need this baseband
williegomezt said:
You have to read the forums, all the information you're looking for is already posted here
https://forum.xda-developers.com/showpost.php?p=75798285&postcount=13
Regards
Click to expand...
Click to collapse
I just realized that this version that I have is Toshiba, not Samsung, as the others usually are, I believe that my problem is born (where says UFS)
Solution
try with firmware opx20.109-34-13
Radick_11 said:
I just realized that this version that I have is Toshiba, not Samsung, as the others usually are, I believe that my problem is born (where says UFS)
Click to expand...
Click to collapse
Did you manage to fix it?
someone knows about some telegram group
Sent from my Moto Z2 Force using XDA Labs
Radick_11 said:
I need this baseband
Click to expand...
Click to collapse
Ya tuviste solución estoy en el mismo aprieto saludos
Hi, I have a Motorola Moto G5S, model XT1790. As much as I look for how to update the system I can not find any compatible firmware. If anyone knows or has managed to update the Android in this mobile model, I would appreciate it if you can help me.
joseulloa said:
Hi, I have a Motorola Moto G5S, model XT1790. As much as I look for how to update the system I can not find any compatible firmware. If anyone knows or has managed to update the Android in this mobile model, I would appreciate it if you can help me.
Click to expand...
Click to collapse
You have to wait for the update, or else use this method (which is unofficial and might void your warranty): https://forum.xda-developers.com/moto-g5s/development/rom-android-8-1-0-oreo-stock-firmware-t3845501
Hola yo tengo el mismo modelo
Si el que te respondió arriba , con ese método vía twrp lo instale y todo bien hasta ahora perfecto, suerte bro
Hi
I have received latest Wanbo model week ago. Have been owning many projectors and android tv sets before but this one is my first projector with embedded Android bought for testing and future mods
Projector has very good hardware for the price, but fails miserably on software level.
Straight of the box with the latest software update many apps do not work well or at all. Netflix returns -80 errors on start. Disney and amazon apps crashing. It is not possible to see projector as cast source from android phone (Poko F3) without app that only cast in SD and displays annoying widgets.
To workaround very poor android experience I have bough cheapest chromecast but because projector requires android tv app to stream from hdmi it is not possible to use chromecast the same way as on tv. Simple actions like changing video quality on chromecast doesn't work and returns user to projector os.
Then I figured out to connect keyboard with touch pad. This allows me to use chrome on projector with youtube and netflix like on PC.
Netflix and other streaming providers are on SD quality due to lack of wildewine support so not really benefiting from projectors full hd features.
After all week of poking with it I would never go with the Android embedded in projector and prefer chromecast or connecting laptop or even phone to normal hdmi only projector that does have good contrast. It is amazing quality hardware but it looks like thet got no time to polish software.
Wanbo T2 seems to be more interested and discussed than T6
i got my T6 Max, and found it's Chinese Version, still searching the Global version firmware for updating it ,
so terrible.....
Good , I recently bought a Wanbo T6 MAX (2gb/16gb GLOBAL VERSION) , the team I mark update by OTA and to update it turned off and does not pass the welcome screen, talk to the provider and I sent this firmware.
Z9-20220407-EN-3.5 1.rar
Compressed (zipped) Folder
1drv.ms
1.I format a pendrive in fat32.
2. I copy the files.
3. I connect the usb and then the power supply.
4. I press the one button on the T6 MAX until it flashes and release it, it comes out with a welcome message but it doesn't go any further.
What can I do?
similar error:
--------------------------------------------------
Buenas , recientemente he comprado un Wanbo T6 MAX (2gb/16gb GLOBAL VERSION) , el equipo me marco actualizacion por OTA y al actualizar se apago y no pasa de la pantalla de bienvenida, hable con el proveedor y me mando este firmware.
Z9-20220407-EN-3.5 1.rar
Compressed (zipped) Folder
1drv.ms
1.Formateo En fat32 un pendrive.
2. Copio los ficheros.
3. Conecto el usb y luego la fuente de alimentacion.
4. Presiono el unico boton del T6 MAX hasta que parpadea y lo suelto, sale mensaje de bienvenida pero no pasa de ahi.
Que puedo hacer¿?
similar error:
elmartin7 said:
Good , I recently bought a Wanbo T6 MAX (2gb/16gb GLOBAL VERSION) , the team I mark update by OTA and to update it turned off and does not pass the welcome screen, talk to the provider and I sent this firmware.
Z9-20220407-EN-3.5 1.rar
Compressed (zipped) Folder
1drv.ms
1.I format a pendrive in fat32.
2. I copy the files.
3. I connect the usb and then the power supply.
4. I press the one button on the T6 MAX until it flashes and release it, it comes out with a welcome message but it doesn't go any further.
What can I do?
similar error:
--------------------------------------------------
Buenas , recientemente he comprado un Wanbo T6 MAX (2gb/16gb GLOBAL VERSION) , el equipo me marco actualizacion por OTA y al actualizar se apago y no pasa de la pantalla de bienvenida, hable con el proveedor y me mando este firmware.
Z9-20220407-EN-3.5 1.rar
Compressed (zipped) Folder
1drv.ms
1.Formateo En fat32 un pendrive.
2. Copio los ficheros.
3. Conecto el usb y luego la fuente de alimentacion.
4. Presiono el unico boton del T6 MAX hasta que parpadea y lo suelto, sale mensaje de bienvenida pero no pasa de ahi.
Que puedo hacer¿?
similar error:
Click to expand...
Click to collapse
Did you checked fw is correct? Try other port and other usb?
And i dont "see" u extract rar file into USB FAT32?
oldman20 said:
¿Has comprobado que fw es correcto? Probar con otro puerto y otro usb?
¿Y no "veo" que extrae el archivo rar en USB FAT32?
Click to expand...
Click to collapse
I doubt the firmware is correct because it was sent to me for the t2 max z9, and I told the supplier.
I tried with several pendrives and in the different usb ports yes.
elmartin7 said:
I doubt the firmware is correct because it was sent to me for the t2 max z9, and I told the supplier.
I tried with several pendrives and in the different usb ports yes.
Click to expand...
Click to collapse
Huh, T2 Max?
oldman20 said:
Huh, T2 Max?
Click to expand...
Click to collapse
Yes....
elmartin7 said:
Yes....
View attachment 5603993
Click to expand...
Click to collapse
Wait! You said that rom for T6Max right?
oldman20 said:
Wait! You said that rom for T6Max right?
Click to expand...
Click to collapse
yes, my model is t6 max, but maybe it is the chinese version the t2max z9 = a t6 max?
send me this :
The provider wrote me again, but he has sent me a recovery to update from the android menu, and it doesn't work, I share it in case any colleague can use it, it includes video.
OneDrive
onedrive.live.com
960.94 MB file on MEGA
mega.nz
I have spoken to the manufacturer and they have sent me a recovery, I am attaching it as well.
1.01 GB file on MEGA
mega.nz
What is different between #11  post? Both them is update from recovery Android menu like you said?
I have problem with wanbo t6 max i want to connect my phone to projector (cast screen)
But can't find any app for this
Before i buying the t6 max , i have a x1 pro and use Miracast official app for cast and work fine, but in t6 max no have options for this
poopoojy said:
I have problem with wanbo t6 max i want to connect my phone to projector (cast screen)
But can't find any app for this
Before i buying the t6 max , i have a x1 pro and use Miracast official app for cast and work fine, but in t6 max no have options for this
Click to expand...
Click to collapse
Using Eshare app built-in
elmartin7 said:
I have spoken to the manufacturer and they have sent me a recovery, I am attaching it as well.
1.01 GB file on MEGA
mega.nz
View attachment 5606887
Click to expand...
Click to collapse
I tried, both of them working, its latest FW 20200419. Im looking solution to make custom recovery from it
oldman20 said:
Using Eshare app built-in
Click to expand...
Click to collapse
Thank you
i install the Eshare but have lag and disconnect issues...
Have alternative app? Work fine Like miracast in x1 pro?
anyone know how to boot into stock recovery? or success connect adb? i tried OK+HOME and OK+BACK but not work!
Hi guys, I bought a Wanbo T6 Max, for the price it's a great entry-level projector. However, some apps like Star+ and HBOmax do not have sound. I think it's a surround codec fault. Because for example when I put an old episode of Simpsons the sound works, but when it is a new episode (with surround sound) there is no sound. The projector doesn't have any sound system settings... Has anyone managed to update via flash drive?
Thank you for your attention!
Hello, I have T6 Max. I was able to use stremio with no problem. But any video I tried to play was pixelated netflix or with usb stick... Does not matter the resolutıon. Like really badly pixelated. Youtube videos were okay if vp9 is selected as codec but avc videos were pixelated too. I returned it to the factory settings because it was getting a little bit slow.
After the factory reset, now all the videos on stremio are pixelated too. The only thing that's watchable is Youtube. Did anyone experience a problem like this before? Is there a way to fix it or I have a faulty product?