Hi guys,
Im really struggling to root my wifes SXS...I think Ive tried every solution on here, but just cant seem to do it. Eventually I want to install Trinity Vengence ROM, but I understand I need to root first.
So I have in my hand:
SXS LT26i locked to Three in the UK
Jellybean 4.1.2
Build No 6.B.1.96
I know I need to get doomlords JB_211-prerooted onto the thing, but I need to root then get CWM installed to do this, and this is where its falling down!
FLASHTOOL - phone recognised, but when it come to inserting the USB cable and pressing back button, nothing happens. Occasionally, it will reboot, but i get the message that USB debugging hasnt been enabled (though it was before the phone rebooted!).
DOOMLORD EasyRoot - wont work on my version of jellybean
Root_with_Restore_by_Bin4ry_v31 - no luck here either. Reboots twice and no root applied.
Im an experienced noob, having installed ROMS on our Galaxy S's and my SGS3, so I can follow instructions well enough, but Im baffled with this!
Any help is greatly appreciated! The wife has another 1.5 years of her contract left and this phone is laggy as hell
Cheers!
TG
tg75 said:
Hi guys,
Im really struggling to root my wifes SXS...I think Ive tried every solution on here, but just cant seem to do it. Eventually I want to install Trinity Vengence ROM, but I understand I need to root first.
So I have in my hand:
SXS LT26i locked to Three in the UK
Jellybean 4.1.2
Build No 6.B.1.96
I know I need to get doomlords JB_211-prerooted onto the thing, but I need to root then get CWM installed to do this, and this is where its falling down!
FLASHTOOL - phone recognised, but when it come to inserting the USB cable and pressing back button, nothing happens. Occasionally, it will reboot, but i get the message that USB debugging hasnt been enabled (though it was before the phone rebooted!).
DOOMLORD EasyRoot - wont work on my version of jellybean
Root_with_Restore_by_Bin4ry_v31 - no luck here either. Reboots twice and no root applied.
Im an experienced noob, having installed ROMS on our Galaxy S's and my SGS3, so I can follow instructions well enough, but Im baffled with this!
Any help is greatly appreciated! The wife has another 1.5 years of her contract left and this phone is laggy as hell
Cheers!
TG
Click to expand...
Click to collapse
Back button? it means volume UP for Xperia S, also check if drivers are installed, you can find them in the flashtool folder or sony developer site
Developer.sonymobile.com > go to downloads
Envious_Data said:
Back button? it means volume UP for Xperia S, also check if drivers are installed, you can find them in the flashtool folder or sony developer site
Developer.sonymobile.com > go to downloads
Click to expand...
Click to collapse
Yep, drivers installed. By back button i mean the "back" soft key area (bottom left hand side)... This is what it says to do ;is this wrong?
Thanks for the quick reply!
TG
tg75 said:
Yep, drivers installed. By back button i mean the "back" soft key area (bottom left hand side)... This is what it says to do ;is this wrong?
Thanks for the quick reply!
TG
Click to expand...
Click to collapse
Its for acro s, so it wrong
for xperia s its volume DOWN i think or maybe up, led color will tell
GREEN LED= flash mode
BLUE LED = fastboot mode
Sent from my LT26i using XDA Premium 4 mobile app
Envious_Data said:
Its for acro s, so it wrong
for xperia s its volume DOWN i think or maybe up, led color will tell
GREEN LED= flash mode
BLUE LED = fastboot mode
Sent from my LT26i using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Nice one, will try that tonight and let you know how it goes!
Cheers,
TG
Flashtool shows the back button because when it was made it was for the X10i which had a had back button to enter flash mode. It's the volume buttons on the XS. Down for flash and up for fastboot if I remember rightly
Both from the phone being off and having the usb cable plugged in at the same time as holding em
Sent from my Nexus 5 using Tapatalk
Ben36 said:
Flashtool shows the back button because when it was made it was for the X10i which had a had back button to enter flash mode. It's the volume buttons on the XS. Down for flash and up for fastboot if I remember rightly
Both from the phone being off and having the usb cable plugged in at the same time as holding em
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Understood, thanks!
Do you reckon thats all it is then? Would me pressing the back "button"/not pressing up or down cause the usb debugging error message?
TG
Hopefully! Lol
Sent from my Nexus 5 using Tapatalk
Ben36 said:
Hopefully! Lol
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
RIGHT! So its down button, soft back button & power button that worked for me to get the green LED on (I think!)
HOWEVER, i get this "Bootloader status : NOT_ROOTABLE" message in flashtool:
18/017/2013 21:17:07 - INFO - Device connected in flash mode
18/017/2013 21:17:07 - INFO - Opening device for R/W
18/017/2013 21:17:07 - INFO - Reading device information
18/017/2013 21:17:07 - INFO - Phone ready for flashmode operations.
18/017/2013 21:17:07 - INFO - Current device : LT26i - BX903E5A5V - 1257-3815_R5H - 1252-0023_6.2.B.0.211 - HUTCH_6.2.B.1.96
18/017/2013 21:17:07 - INFO - Start Flashing
18/017/2013 21:17:07 - INFO - Processing loader.sin
18/017/2013 21:17:07 - INFO - Checking header
18/017/2013 21:17:07 - INFO - Flashing data
18/017/2013 21:17:09 - INFO - Loader : S1_Root_de72 - Version : R5C004 / Boot version : R10C008 / Bootloader status : NOT_ROOTABLE
18/017/2013 21:17:09 - INFO - Processing kernel.sin
18/017/2013 21:17:09 - INFO - Checking header
18/017/2013 21:17:10 - INFO - Flashing data
18/017/2013 21:17:12 - INFO - Ending flash session
18/017/2013 21:17:12 - INFO - Flashing finished.
18/017/2013 21:17:12 - INFO - Please unplug and start your phone
18/017/2013 21:17:12 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
18/017/2013 21:17:13 - INFO - Device connected in flash mode
Any ideas what I can do now?!
Cheers !
TG
That just means that the bootloader is locked. U can't flash custom kernels
Sent from my Nexus 5 using Tapatalk
Ben36 said:
That just means that the bootloader is locked. U can't flash custom kernels
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Hi Ben,
That means I'm stuck then... I believe I need to flash a certain doomlord kernel first, then install his pre rooted rom before I do anything else.
Is that correct? Surely there is another way... Hopefully there is another way!
TG
tg75 said:
RIGHT! So its down button, soft back button & power button that worked for me to get the green LED on (I think!)
HOWEVER, i get this "Bootloader status : NOT_ROOTABLE" message in flashtool:
18/017/2013 21:17:07 - INFO - Device connected in flash mode
18/017/2013 21:17:07 - INFO - Opening device for R/W
18/017/2013 21:17:07 - INFO - Reading device information
18/017/2013 21:17:07 - INFO - Phone ready for flashmode operations.
18/017/2013 21:17:07 - INFO - Current device : LT26i - BX903E5A5V - 1257-3815_R5H - 1252-0023_6.2.B.0.211 - HUTCH_6.2.B.1.96
18/017/2013 21:17:07 - INFO - Start Flashing
18/017/2013 21:17:07 - INFO - Processing loader.sin
18/017/2013 21:17:07 - INFO - Checking header
18/017/2013 21:17:07 - INFO - Flashing data
18/017/2013 21:17:09 - INFO - Loader : S1_Root_de72 - Version : R5C004 / Boot version : R10C008 / Bootloader status : NOT_ROOTABLE
18/017/2013 21:17:09 - INFO - Processing kernel.sin
18/017/2013 21:17:09 - INFO - Checking header
18/017/2013 21:17:10 - INFO - Flashing data
18/017/2013 21:17:12 - INFO - Ending flash session
18/017/2013 21:17:12 - INFO - Flashing finished.
18/017/2013 21:17:12 - INFO - Please unplug and start your phone
18/017/2013 21:17:12 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
18/017/2013 21:17:13 - INFO - Device connected in flash mode
Any ideas what I can do now?!
Cheers !
TG
Click to expand...
Click to collapse
If you want to flash a ROM,first thing to do is root the phone and have an unlocked bootloader. I wont tell u here how to do that as there are tons of guides out there. Just use search and you should be fine
This is the problem I'm having, none of the methods seem to work for me.
Doomlords doesn't work on 6.2.1.64 (or whatever)
And I can't flash a kernel that will allow me to root because the bootloader is locked. In these service menu, bootloader unlock says no.
Surely there's a way round this, no?
tg75 said:
This is the problem I'm having, none of the methods seem to work for me.
Doomlords doesn't work on 6.2.1.64 (or whatever)
And I can't flash a kernel that will allow me to root because the bootloader is locked. In these service menu, bootloader unlock says no.
Surely there's a way round this, no?
Click to expand...
Click to collapse
Firstly flash stock .211 kernel. Root your phone. Than flash .96 kernel. Thats it
Sent from my LT26i using XDA Premium 4 mobile app
Hi abdulkadiro,
That's what I'm trying to flash that gives me the bootloader error in flashtool (shown above)...
Any ideas mate?
TG
ya he is correct.
tg75 said:
Hi abdulkadiro,
That's what I'm trying to flash that gives me the bootloader error in flashtool (shown above)...
Any ideas mate?
TG
Click to expand...
Click to collapse
I just went through your flashtool log... It shows flashing finished... Follow the next step from doomlord's post...not rootable just means locked bl...nothing else...you need to run the perf_ event script after this... Just follow the steps to get root
And did you follow the step where you have to close flashtool before proceeding??
Sent from my Micromax A110 using xda app-developers app
tg75 said:
Hi abdulkadiro,
That's what I'm trying to flash that gives me the bootloader error in flashtool (shown above)...
Any ideas mate?
TG
Click to expand...
Click to collapse
Flashtool says you have succeed with flashing. Just root your phone with doomlords rooting script. Than flash .96 kernel
Sent from my LT26i using XDA Premium 4 mobile app
Hi guys,
thanks for your input...Ive got myself a bit confused now unfortunately!
Ok, Ive managed to get root, and downgraded to ICS as I thought this would make it easier, cocked it up up, re-flashed ICS and lost root...now I cant get root installed again:laugh:idiot!
Ill be honest, Im lost!
TG
tg75 said:
Hi guys,
thanks for your input...Ive got myself a bit confused now unfortunately!
Ok, Ive managed to get root, and downgraded to ICS as I thought this would make it easier, cocked it up up, re-flashed ICS and lost root...now I cant get root installed again:laugh:idiot!
Ill be honest, Im lost!
TG
Click to expand...
Click to collapse
Mate, follow this: http://forum.xda-developers.com/showthread.php?t=2154348
You'll have .55 firmware rooted and with CWM, and then: http://forum.xda-developers.com/showthread.php?t=2302631
You'll have prerooted JB firmware with CWM. And then you just do what you want.
Related
Solved, Thanks all..
Need advise asap
i'm using Flashtool 2.9.1 to flash FW 4.0.A.2.368
Unknown Sources & USB Debugging were ON, but i got this message
Code:
18/054/2011 14:54:37 - INFO - <- This level is successfully initialized
18/057/2011 14:57:10 - INFO - Preparing files for flashing
18/058/2011 14:58:25 - INFO - Searching Xperia....
18/058/2011 14:58:40 - ERROR - Please plug you device in flash mode
18/058/2011 14:58:41 - INFO - Searching Xperia....
18/058/2011 14:58:42 - INFO - Found at USB\VID_0FCE&PID_ADDE\5&10EF021E&0&6
18/058/2011 14:58:42 - INFO - Start Flashing
18/058/2011 14:58:42 - INFO - VER="R9A021";DATE="20110128";TIME="11:49:00";
18/058/2011 14:58:42 - INFO - Flashing loader
18/058/2011 14:58:44 - INFO - PROT_VER="03";DATE="20110217";TIME="15:47:00";VER="R4A066";CXC="1234-5769";TYPE="S1_LOADER";UNIQUE_DEV_ID="2AF218B9120AFF01A96EACF8A76E789469F4E6C5";SEC_LOCK_STATUS="LOCKED";OTP_DATA="4B6D7100471404C81504042800A5F05AB001002000000000";IMEI="35730204399890";AID_VERSION="0004";EROM_AID="0001";LOADER_AID="0001";SW_AID="0001";CUST_AID="0001";SIM_LOCK_AID="0001";HWCONF_AID="0001";PROD_ID="0001";ACTIVE_LOADER_AID="0001";MEMDEVS="02:00:002C:00B3:0000:00002000:00020000:00000800:00000040";MAN_ID="002C";DEV_ID="00B3";SIN_VER="0001";AID_TAMP="NOT_TAMPERED";MAX_PKT_SZ="00010000";AUTH_LEVEL="NONE";AUTH_MET="0001";CARD_PRESENT="NO";LOADER_ROOT="S1_Loader_Root_773f";EROM_ROOT="S1_EROM_Root_d601";SW_ROOT="S1_SW_Root_883f";CUST_ROOT="S1_Cust_Root_9603";SIM_LOCK_ROOT="S1_SL_Root_c422";HW_CONF_ROOT="S1_HWConf_Root_08af";BIM_STATE="DISABLED";
18/058/2011 14:58:44 - INFO - Flashing adsp.sin
18/058/2011 14:58:49 - INFO - Flashing kernel.sin
18/058/2011 14:58:54 - INFO - Flashing amss_fs.sin
18/058/2011 14:58:54 - INFO - Flashing fota1.sin
18/058/2011 14:58:55 - INFO - Flashing fota0.sin
18/058/2011 14:58:56 - INFO - Flashing apps_log.sin
18/058/2011 14:58:56 - INFO - Flashing amss.sin
18/059/2011 14:59:07 - INFO - Flashing cache.sin
18/059/2011 14:59:08 - INFO - Flashing system.sin
[COLOR="Red"]18/059/2011 14:59:25 - ERROR - Error flashing. Aborted[/COLOR]
18/059/2011 14:59:25 - INFO - Now unplug the device and power it on
18/059/2011 14:59:25 - INFO - Then go to application settings
18/059/2011 14:59:25 - INFO - turn on Unknown Sources and Debugging
And now my phone can't boot up.
i'm flashing Recovery and restored my backup but my phone still can't boot up.
Any idea?
Let me camp here..the last time I tried to flash the uk generic firmware, I encountered this problem.. Had to restore via seus and now im rooted after unlocking bl..
If I remember correctly, you need to use the second latest flashtool, not the latest one.
Sent from my R800
captain67 said:
If I remember correctly, you need to use the second latest flashtool, not the latest one.
Sent from my R800
Click to expand...
Click to collapse
2.9.1 is the second latest.
i'm in the same boat here as OP need help please.
Thanks all, it's solved now.
i think the problem is the complicated drivers on my PC.
i use another pc to flash and it's going well..
Glad you got fixed, I did too
I found a different solution, so I'll post in case it helps someone else.
The one thing that was bugging me, was that the flashtool I had was the one I originally downloaded (2.9.1) back when I moded with .145 & this guide quoted 2.9.1 BETA and I don't remember my original as beta. So I downloaded the flashtool again, and when I copied the .exe across over my original it had a different timestamp so clearly a slightly different version.
Worked first time with the beta download.
Rixter757 said:
Glad you got fixed, I did too
I found a different solution, so I'll post in case it helps someone else.
The one thing that was bugging me, was that the flashtool I had was the one I originally downloaded (2.9.1) back when I moded with .145 & this guide quoted 2.9.1 BETA and I don't remember my original as beta. So I downloaded the flashtool again, and when I copied the .exe across over my original it had a different timestamp so clearly a slightly different version.
Worked first time with the beta download.
Click to expand...
Click to collapse
woaa.. it's nice.
can you give me link of the Beta?
veL17 said:
woaa.. it's nice.
can you give me link of the Beta?
Click to expand...
Click to collapse
Sure, no problem. Good luck...
http://www.multiupload.com/7H4JT35B6G
hey, i have the same problem too, but i try using all yr method but it is still not working. can anyone help!? omg.
before i'm going oversea, i hope there will be some solution to encounter my problem when i come back. just to briefly tell u all what i have done on my phone.
First, stupidly me, i have not seen the latest way to root my xperia play. i went to use the step to unlock my bootloader, and find out there is a better way to root my xperia play without unlocking bootloader.
So, i went to check how to relock my bootloader with flashtool and it was succesfully done.
after that, i went to flash with Xperia_Play_Release_Generic_UK, and now, the flashing had failed. i wanted to flash it and use gingerbreak, and use ota to update to 2.3.3. However, it was not successfully done.
1 more thing, just wanna check with u guys, to flash my xperia play, and to get the usb working, am i suppose just to install ggsetup-2.2.0.10 to get it working? sorry if i am asking a stupid question, but just to comfirm with u guys, i'll be appreciated.
hope u guys can help, cause i just bought my xperia play recently only, i dun wanna it to brick so early. someone help. please. ):
weihong892 said:
before i'm going oversea, i hope there will be some solution to encounter my problem when i come back. just to briefly tell u all what i have done on my phone.
First, stupidly me, i have not seen the latest way to root my xperia play. i went to use the step to unlock my bootloader, and find out there is a better way to root my xperia play without unlocking bootloader.
So, i went to check how to relock my bootloader with flashtool and it was succesfully done.
after that, i went to flash with Xperia_Play_Release_Generic_UK, and now, the flashing had failed. i wanted to flash it and use gingerbreak, and use ota to update to 2.3.3. However, it was not successfully done.
1 more thing, just wanna check with u guys, to flash my xperia play, and to get the usb working, am i suppose just to install ggsetup-2.2.0.10 to get it working? sorry if i am asking a stupid question, but just to comfirm with u guys, i'll be appreciated.
hope u guys can help, cause i just bought my xperia play recently only, i dun wanna it to brick so early. someone help. please. ):
Click to expand...
Click to collapse
I'm sorry, this is too late to respond your post.
yes, just install ggsetup / pc companion to get usb driver work.
Hey,
Anyone no why i keep getting this error.
23/034/2011 12:34:41 - INFO - Flashing adsp.sin
23/034/2011 12:34:50 - ERROR - Error flashing. Aborted
Thank You
- Sonny Dickson
I had similar, but i'm having no luck. Mine errors after trying to flash the loader.sin
17/040/2011 15:40:34 - INFO - Flashing loader
17/040/2011 15:40:34 - DEBUG - Streaming from file : .\firmwares\prepared\loader.sin
17/040/2011 15:40:34 - DEBUG - write(cmd=5) (finish)
17/040/2011 15:40:34 - DEBUG - Reply :
17/040/2011 15:40:34 - DEBUG - Reply(Hex) : []
17/040/2011 15:40:34 - DEBUG - write(cmd=7) (finish)
17/040/2011 15:40:34 - ERROR - Error flashing. Aborted
Any help?
Thanks,
chris
Sonny788 said:
Hey,
Anyone no why i keep getting this error.
23/034/2011 12:34:41 - INFO - Flashing adsp.sin
23/034/2011 12:34:50 - ERROR - Error flashing. Aborted
Thank You
- Sonny Dickson
Click to expand...
Click to collapse
Make sure you have also tried different cables too! I spent way to long on this and it was just a cable issue. Although drivers matter too so be sure to try different adb drivers. I have the best luck with short thick blackberry usb cables. Maybe borrow one and try it out.
i had this problem too
i use another pc
and its fixed
hi
i've been recently using this Rom JJ's HYBRID ROM v3.1 with xarc ics kernel ( http://forum.xda-developers.com/showthread.php?t=1653655 )
then decided to relock the bootloader and install the stock ICS via the update service
i used the X10FlashTool to relock the bootloader,, when flashing Xperia_Relock_bootloader.ftf the flashtool asked me to unplug, power on the device and turn on unknown resources and debugging
PHP:
16/027/2012 06:27:05 - INFO - Now unplug the device and power it on
16/027/2012 06:27:05 - INFO - Then go to application settings
16/027/2012 06:27:05 - INFO - turn on Unknown Sources and Debugging
so i've unpluged it and tried to power it on but it only vibrates and nothing happens and the screen doesn't even flash!
i know i'm a beginner and i don't what do i have to do right now and need your help
EDIT*: when i try to turn on the device the small light near the micro usb flashes green once and the the device vibrates (1 second or less) and nothing happens)
and guys please notice that i can't do anything on the phone because it completely doesn't work
LP.Bullets said:
hi
i've been recently using this Rom JJ's HYBRID ROM v3.1 with xarc ics kernel ( http://forum.xda-developers.com/showthread.php?t=1653655 )
then decided to relock the bootloader and install the stock ICS via the update service
i used the X10FlashTool to relock the bootloader,, when flashing Xperia_Relock_bootloader.ftf the flashtool asked me to unplug, power on the device and turn on unknown resources and debugging
PHP:
16/027/2012 06:27:05 - INFO - Now unplug the device and power it on
16/027/2012 06:27:05 - INFO - Then go to application settings
16/027/2012 06:27:05 - INFO - turn on Unknown Sources and Debugging
so i've unpluged it and tried to power it on but it only vibrates and nothing happens and the screen doesn't even flash!
i know i'm a beginner and i don't what do i have to do right now and need your help
Click to expand...
Click to collapse
just out odf curiosity did you have flash back the stock kernel? it wont boot once locked with a custom kernel...
Pvy
pvyParts said:
just out odf curiosity did you have flash back the stock kernel? it wont boot once locked with a custom kernel...
Pvy
Click to expand...
Click to collapse
tried to flash the stock kernel but it says that the device must be rooted!!
but i can't root it again cuz i can't enable usb debugging and unkonow resources because the device doesn't turn on!
LP.Bullets said:
tried to flash the stock kernel but it says that the device must be rooted!!
but i can't root it again cuz i can't enable usb debugging and unkonow resources because the device doesn't turn on!
Click to expand...
Click to collapse
ok you will prob need to either put it in flash mode and exclude everything but the kernel (in flashtool) or flash the entire stock firmware
EDIT* or re-unlock flash stock kernel and then lock again
Pvy.
pvyParts said:
ok you will prob need to either put it in flash mode and exclude everything but the kernel (in flashtool) or flash the entire stock firmware
EDIT* or re-unlock flash stock kernel and then lock again
Pvy.
Click to expand...
Click to collapse
in order to unlock it device must be rooted which is not possible
EDIT* when i try to root,, it says "deamon started successfully" and then nothing happens
NOTE:
when i try to power on the device the small light near the micro-usb flashed green once!
is there anyway to enable usb debugging and unknown resources without turning on the device?
Please help me
Can't anyone help??????
Just download General Global World 4.0.4 from one of the threads and flash it in Flashtool.
Do note that you WILL lose all your data (whatever is on your SD card is safe) but your phone should work again and with the stock ICS. You can then proceed with unlocking your bootloader and rooting it.
Cheers!
xtacy! said:
Just download General Global World 4.0.4 from one of the threads and flash it in Flashtool.
Do note that you WILL lose all your data (whatever is on your SD card is safe) but your phone should work again and with the stock ICS. You can then proceed with unlocking your bootloader and rooting it.
Cheers!
Click to expand...
Click to collapse
the same problem
Code:
16/049/2012 09:49:44 - INFO - Flashing adsp.sin
16/049/2012 09:49:47 - INFO - Flashing kernel.sin
16/049/2012 09:49:49 - INFO - Flashing fota1.sin
16/049/2012 09:49:50 - INFO - Flashing fota0.sin
16/049/2012 09:49:52 - INFO - Flashing apps_log.sin
16/049/2012 09:49:52 - INFO - Flashing amss_fs_ayame.sin
16/049/2012 09:49:52 - INFO - Flashing amss.sin
16/050/2012 09:50:01 - INFO - Flashing cache.sin
16/050/2012 09:50:02 - INFO - Flashing system.sin
16/052/2012 09:52:36 - INFO - Flashing userdata.sin
16/052/2012 09:52:36 - ERROR - Error flashing. Aborted
16/052/2012 09:52:36 - INFO - Now unplug the device and power it on
16/052/2012 09:52:36 - INFO - Then go to application settings
16/052/2012 09:52:36 - INFO - turn on Unknown Sources and Debugging
i have to turn on unknown sources and debugging,, but the device doesn't power on so i'm not able to enable them
but now when i turn it on it shows the Sony logo and then a triangle and a cell phone in front of it
what happened?
LP.Bullets said:
in order to unlock it device must be rooted which is not possible
EDIT* when i try to root,, it says "deamon started successfully" and then nothing happens
Click to expand...
Click to collapse
No, the device doesn't have to be rooted to unlock the bootloader. Just get your password from Sony site, and enter fastboot, just like the first time you did it. Remember, you will lose all your data.
Otherwise, as pvy said, flash stock kernel with FlashTool (tick all the boxes apart from "Exclude Kernel" and "Wipe Data"). That way your data will be intact.
iR¡[email protected]!* via Tapatalk 2
iridaki said:
No, the device doesn't have to be rooted to unlock the bootloader. Just get your password from Sony site, and enter fastboot, just like the first time you did it. Remember, you will lose all your data.
Otherwise, as pvy said, flash stock kernel with FlashTool (tick all the boxes apart from "Exclude Kernel" and "Wipe Data"). That way your data will be intact.
iR¡[email protected]!* via Tapatalk 2
Click to expand...
Click to collapse
but the phone doesn't turn on,, so i can't get the IMEI from my phone to unlock the bootloader!
isn't there any way to get that number?
You can get your IMEI number from the box your arc S came in or just look under that battery. It's a 15 digit number. When you enter it on the Sony unlocking site, just exclude the last digit.
Cheers!
just try what pvy said,.
first you flash the kernel Only.,
then try to un-lock it Or install a full stock firmware.,
xtacy! said:
Just download General Global World 4.0.4 from one of the threads and flash it in Flashtool.
Do note that you WILL lose all your data (whatever is on your SD card is safe) but your phone should work again and with the stock ICS. You can then proceed with unlocking your bootloader and rooting it.
Cheers!
Click to expand...
Click to collapse
at the first time it didn't work
but now it works ))
thank you so much
Hey there! I have just bought an xperia arc s lt18i. I am not a noob or new in android so u can answer my doubts normally, I will understand u lol!
I had a galaxy s sl and I think everything was quite different and easier. galaxy s (i9000) ROMS, firmwares, kernels, mods, etc weren't compatible with mine (i9003) and flashing them automatically bricks the phone. I have been reading a lot here and I still don't understand something...
--Are xperia arc and xperia arc s firmwares, roms, kernels and mods compatible with each other? Because I was going to root my lt18i (currently on official ics), I was downloading everything to follow the steps and I noticed I had downloaded the 2.3.4 firmware: LT15i_4.0.2.A.0.42. Can I flash this with flashtools? Isn't this an arc firmware or can I flash it in my arc s? Everything is being a bit difficult to me since it is absolutely different to samsung devices and since here there are a looot of tutorials saying similar but not same things...
Hope u understand me and can help me with this.
Thank u
Hi
Flashing arc <--> arc S work normally, if you wipe, if you don't, I would say 50:50=work:not work.
Always remember: Settings will always show that, you flashed. E.g you flashed arc FW on arc S, Settings will show arc.
And it's always better to flash the right Firmware.
If you still have questions, ask them. And press Thanks0
Sent from my ICS-powered arc S. From Austria!
PS: PM me if you are a Rubiks Cube lover.
Well, the idea is, that Xperia Arc S is the same to Arc except for the stronger hardware. They share the same software, Arc S just run it smoother, and the games on Arc S feels better, etc.
If a ROM can be run on the Arc then it can run on Arc S. Except for a few cases that the developer HIGHLY CUSTOMIZED the ROM for one of the two device, then the other device will receive bugs (but no brick).
To be honest, I don't feel the difference in Arc and Arc S (I own a few smartphone shops in VietNam). The difference can only be spotted within games, the Arc S does last longer in battery life though
Thanks for ur replies!
My problem is the following...
I flashed LT15i_4.0.2.A.0.42_(1247-1041).ftf with flashtools but when it finished it says
Code:
16/008/2012 14:08:54 - INFO - <- This level is successfully initialized
16/008/2012 14:08:55 - INFO - Flashtool Version 0.9.0.0 built on 2012-07-19 22:57:15
16/008/2012 14:08:55 - INFO - You can drag and drop ftf files here to start flashing them
16/009/2012 14:09:00 - INFO - Device disconnected
16/009/2012 14:09:06 - INFO - Selected LT18i_4.1.A.0.562_Iberia.ftf
16/009/2012 14:09:06 - INFO - Preparing files for flashing
16/009/2012 14:09:09 - INFO - Please connect your device into flashmode.
16/009/2012 14:09:17 - INFO - Device connected in flash mode
16/009/2012 14:09:18 - INFO - Opening device for R/W
16/009/2012 14:09:18 - INFO - Reading device information
16/009/2012 14:09:18 - INFO - Phone ready for flashmode operations.
16/009/2012 14:09:18 - INFO - Start Flashing
16/009/2012 14:09:18 - INFO - Flashing loader
16/009/2012 14:09:20 - INFO - Loader : S1_Loader_Root_773f - Version : R4A066 / Bootloader status : NOT_ROOTABLE
16/009/2012 14:09:20 - WARN - This file is ignored : simlock.ta
16/009/2012 14:09:20 - INFO - Flashing kernel.sin
16/009/2012 14:09:23 - INFO - Flashing fota0.sin
16/009/2012 14:09:25 - INFO - Flashing fota1.sin
16/009/2012 14:09:26 - INFO - Flashing adsp.sin
16/009/2012 14:09:29 - INFO - Flashing amss_fs_ayame.sin
16/009/2012 14:09:29 - INFO - Flashing amss.sin
16/009/2012 14:09:38 - INFO - Flashing apps_log.sin
16/009/2012 14:09:38 - INFO - Flashing system.sin
16/012/2012 14:12:11 - INFO - Ending flash session
[COLOR="Red"]16/012/2012 14:12:11 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_STATIC="HASH_VER";ERR_DYNAMIC="Final data verification failed";
16/012/2012 14:12:11 - ERROR - Error flashing. Aborted[/COLOR]
16/012/2012 14:12:11 - INFO - Device connected in flash mode
16/012/2012 14:12:13 - INFO - Device disconnected
16/012/2012 14:12:14 - INFO - Device connected in flash mode
The phone is stuck in bootlogo (sony) but it doesn't boot. It turns down, tries to restart but stucks... I am downloading LT18i_4.1.A.0.562_Iberia.ftf now and will try to reflash in flashtools to try to make it boot.
What do u think guys?
BIG thanks
I have just flashed that fw but at the end, after flashing everything it says
Code:
16/029/2012 16:29:46 - INFO - Flashing finished.
16/029/2012 16:29:46 - INFO - Please wait. Phone will reboot
16/029/2012 16:29:46 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
16/029/2012 16:29:47 - INFO - Device connected in flash mode
16/031/2012 16:31:22 - INFO - Device disconnected
but it DOESNT reboot. I have to disconnect it and reboot, but is stucked in bootlogo (bootlooping) I think it can be the flashtool version...
Can anybody provide me the correct flashtools program or another idea please??
It booted! I rebooted it manually and didn't stuck! It was a fw problem. Now, I will root it Thank u guys!!
luiseteyo said:
I have just flashed that fw but at the end, after flashing everything it says
Code:
16/029/2012 16:29:46 - INFO - Flashing finished.
16/029/2012 16:29:46 - INFO - Please wait. Phone will reboot
16/029/2012 16:29:46 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
16/029/2012 16:29:47 - INFO - Device connected in flash mode
16/031/2012 16:31:22 - INFO - Device disconnected
but it DOESNT reboot. I have to disconnect it and reboot, but is stucked in bootlogo (bootlooping) I think it can be the flashtool version...
Can anybody provide me the correct flashtools program or another idea please??
It booted! I rebooted it manually and didn't stuck! It was a fw problem. Now, I will root it Thank u guys!!
Click to expand...
Click to collapse
It does reboot. It reboots back into flashmode. Disconnect cable and turn on the phone. It is meant to be so.
Use Flashtool 0.9. I will send a mirror by pm.
Sent from my ICS-powered arc S. From Austria!
PS: PM me if you are a Rubiks Cube lover.
Someguyfromhell said:
It does reboot. It reboots back into flashmode. Disconnect cable and turn on the phone. It is meant to be so.
Click to expand...
Click to collapse
Now u are here. I am trying to root it with DooMLoRD Toolkit v4.0 but it doesn`t let me... It seems like if it couldn't find the device. I have the proper drivers installed but it seems to not connect the device. It is in USB Debugging and Unknown sources... What can be happening?
Which FW do you have now?
Sent from my ICS-powered arc S. From Austria!
PS: PM me if you are a Rubiks Cube lover.
papayayoghurt said:
Which FW do you have now?
Sent from my ICS-powered arc S. From Austria!
PS: PM me if you are a Rubiks Cube lover.
Click to expand...
Click to collapse
I have (LT18i)_4.0.2.A.0.42_CE installed
Open Flashtool and press the Key.
Check that USB debugging is enabled.
Sent from my ICS-powered arc S. From Austria!
PS: PM me if you are a Rubiks Cube lover.
I ve been through this try reading this
http://forum.xda-developers.com/showthread.php?t=1653188
papayayoghurt said:
Open Flashtool and press the Key.
Check that USB debugging is enabled.
Sent from my ICS-powered arc S. From Austria!
PS: PM me if you are a Rubiks Cube lover.
Click to expand...
Click to collapse
Yess I could root it with flashtools Thank u! Now, if I upgrade to ICS the root won't disappear, is it right? Really thanks for ur time
What do u recommend me to do? ICS was a battery drainer and it was too warm. Now I am in 2.3.4 and everything is quite good, also the battery.
luiseteyo said:
Yess I could root it with flashtools Thank u! Now, if I upgrade to ICS the root won't disappear, is it right? Really thanks for ur time
What do u recommend me to do? ICS was a battery drainer and it was too warm. Now I am in 2.3.4 and everything is quite good, also the battery.
Click to expand...
Click to collapse
Any advices?
Sent from my LT18i using xda app-developers app
Try latest ics its good and battery friendly
.587 version posted on general
Sent from my LT18i using xda premium
justkiddinghere said:
Try latest ics its good and battery friendly
.587 version posted on general
Sent from my LT18i using xda premium
Click to expand...
Click to collapse
And does the battery get warm? Thank u very much for ur advice. It is difficult at first
Sent from my LT18i using xda app-developers app
Yep in few roms and with few kernal it does not exactly battry but from camera corner but its common all have not a issue or worry
Sent from my LT18i using xda premium
I am sorry to rebump the thread but i have other questions. Ok, i am rooted and deleted all the unuseful apps. I edited build prop and everything. I wajt to flash a kernel to flash from recovery a rom. I cant access fastboot mode so i cant flash any recovery kernel or anything. I connect the phone pressing menu button but i cant find the blue light anywhere... Probably it is a driver issue or i dont know if somebody could help me with that i would e very grateful. Thanks!!!
Sent from my LT18i using xda app-developers app
luiseteyo said:
I am sorry to rebump the thread but i have other questions. Ok, i am rooted and deleted all the unuseful apps. I edited build prop and everything. I wajt to flash a kernel to flash from recovery a rom. I cant access fastboot mode so i cant flash any recovery kernel or anything. I connect the phone pressing menu button but i cant find the blue light anywhere... Probably it is a driver issue or i dont know if somebody could help me with that i would e very grateful. Thanks!!!
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
Driver has nothing to do with phone not going to fastboot.
If notification LED, the LED next to microUSB, doesn't turn led, then 2 choices:
1) You are doing it wrong - Turn off phone, connect USB cable to PC, hold down Menu button, connect USB cable to phone.
2) Your phone is SIM-locked and/or branded - Fastboot is disabled. Only way is via paid method.
So i have to unlock bootloader? But if there are roms also for locked bl is because locked bl can also access to fastboot mode. Am i right?
So what must i do? How? Where can i unlock it the cheapest way? Thank u very much for ur answers!
Sent from my LT18i using xda app-developers app
Hello.
Have the same problem as this guy. http://forum.xda-developers.com/showthread.php?t=1948822
No led, no sony or kernel logo!l
I have an unlocked bootloader. Help!!!
kaluniguni said:
I have an unlocked bootloader. Help!!!
Click to expand...
Click to collapse
What have you tried?
XperienceD said:
What have you tried?
Click to expand...
Click to collapse
I have tried everything: connecting to flashtool/ PC Companion fails (doesn't recognize), no flashmode, no fastboot, no batery charge...
You Must Change Kernel Wich Recomendation From CusROM. Maybe you ROM needs Unlock and Change Kernel.
And Tham Now You Need reFlashing With Sony PC Companion Or Flashtool. Brick Is Normal Gays, don't wory, Break Is Tje Good For You.
Sory with The Bad Englis
Sent from my ST15i using xda premium
kaluniguni said:
I have tried everything: connecting to flashtool/ PC Companion fails (doesn't recognize), no flashmode, no fastboot, no batery charge...
Click to expand...
Click to collapse
Is this after restarting your PC and removing the battery from your Phone before reconnecting?
XperienceD said:
Is this after restarting your PC and removing the battery from your Phone before reconnecting?
Click to expand...
Click to collapse
Yes it is. Very sad...
BUMP! HELP!
B
u
m
p
what were you doing before that?
Sent from my Xperia Arc S using xda premium
tangosierra_ said:
what were you doing before that?
Sent from my Xperia Arc S using xda premium
Click to expand...
Click to collapse
I simply turned off my phone! It was running Xperia Ultimate HD
I don't think its hard bricked.Devices don't ever get bricked simply after turning off.
I think it is only not booting up.
Use flashtool and flash stock firmware.
Flash again if it does not boot up.
You will be alright.
Sent from my Xperia Arc using xda app-developers app
i think I have similar problem
sandroidnz01 said:
I don't think its hard bricked.Devices don't ever get bricked simply after turning off.
I think it is only not booting up.
Use flashtool and flash stock firmware.
Flash again if it does not boot up.
You will be alright.
Sent from my Xperia Arc using xda app-developers app
Click to expand...
Click to collapse
it happened that I selected the option update software when I was in wifi connection and the phone started to download the files for sometimes, then I put my phone in the pocket waiting for the download to finish , when i took my phone from the pocket it was off , i tried to switch it on but it didn't switch on, i took the battery and charged it separately again didn't switch on, then i dicided to flash it using flashtool 0.9.10.1 and firmware LT15i_4.1.A.0.562.tft but the flashing progress ended in 0% and with an error message03/020/2013 20:20:16 - INFO - <- This level is successfully initialized
03/020/2013 20:20:16 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
03/020/2013 20:20:16 - INFO - You can drag and drop ftf files here to start flashing them
03/020/2013 20:20:21 - INFO - Device disconnected
03/020/2013 20:20:36 - INFO - Selected LT15i_4.1.A.0.562.ftf
03/020/2013 20:20:36 - INFO - Preparing files for flashing
03/020/2013 20:20:38 - INFO - Please connect your device into flashmode.
03/020/2013 20:20:54 - INFO - Device connected in flash mode
03/020/2013 20:20:55 - INFO - Opening device for R/W
03/020/2013 20:20:55 - INFO - Start Flashing
03/020/2013 20:20:55 - INFO - Processing loader
03/020/2013 20:20:55 - INFO - Checking header
03/020/2013 20:20:55 - INFO - Ending flash session
03/020/2013 20:20:55 - ERROR -
03/020/2013 20:20:55 - ERROR - Error flashing. Aborted" what should i do? please help me!
you mean you accepted an OTA updated with your boot loader unlocked?
Sent from my Xperia Arc S using xda premium
Mayever said:
it happened that I selected the option update software when I was in wifi connection and the phone started to download the files for sometimes, then I put my phone in the pocket waiting for the download to finish , when i took my phone from the pocket it was off , i tried to switch it on but it didn't switch on, i took the battery and charged it separately again didn't switch on, then i dicided to flash it using flashtool 0.9.10.1 and firmware LT15i_4.1.A.0.562.tft but the flashing progress ended in 0% and with an error message03/020/2013 20:20:16 - INFO - <- This level is successfully initialized
03/020/2013 20:20:16 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
03/020/2013 20:20:16 - INFO - You can drag and drop ftf files here to start flashing them
03/020/2013 20:20:21 - INFO - Device disconnected
03/020/2013 20:20:36 - INFO - Selected LT15i_4.1.A.0.562.ftf
03/020/2013 20:20:36 - INFO - Preparing files for flashing
03/020/2013 20:20:38 - INFO - Please connect your device into flashmode.
03/020/2013 20:20:54 - INFO - Device connected in flash mode
03/020/2013 20:20:55 - INFO - Opening device for R/W
03/020/2013 20:20:55 - INFO - Start Flashing
03/020/2013 20:20:55 - INFO - Processing loader
03/020/2013 20:20:55 - INFO - Checking header
03/020/2013 20:20:55 - INFO - Ending flash session
03/020/2013 20:20:55 - ERROR -
03/020/2013 20:20:55 - ERROR - Error flashing. Aborted" what should i do? please help me!
Click to expand...
Click to collapse
This looks like Unlocked bootloader OTA brick,this happened to me once,try to lock your bootloader then flashing with flashtool and then unlock again.
Sent from my LT15i using xda premium
I remember there was a fix by fxp in the dev section but the link apparently went dead.
Sent from my Xperia Arc S using xda premium
Here you go
http://forum.xda-developers.com/showthread.php?t=1598160. This thread is fr ppl who unlockd bl nd accepted ota nd hard bricked phone.
Press thanks if I helped
Sent from my MT11i using Tapatalk 2
Yes but he said he was on ultimate hd rom so why would it brick the phone? Just from update?
Sent from my Neo V UHD using Xda Premium
Ota update not of the rom from sony about firmware if ur on unlocked bl and u accept an ota via stock update centre app ur sure to get a hard brick
Sent from my MT11i using Tapatalk 2
But the ota updater on uhd only downloads uhd updates doesnt it?
Sent from my Neo V UHD using Xda Premium
???? I'm confused here
so you accepted an update from the stock update centre app or the uhd one?
Sent from my Xperia Arc S using xda premium
Ota update centre downloads uhd updates bt stock update centre app in app drawer downloads sony updates
Sent from my MT11i using Tapatalk 2
Hi guys. I bought an Xperia M to replace my iphone 4s. I love this phone, makes my old iphone look really craptastic speed wise. I went to do the bootloader unlock, things said they went well but now its stuck in a boot loop. Also if I flash a stock firmware on it does the boot loader stay unlocked if i use the same version that was installed? I have the fixed image to do the cwm recovery adn root, but want to know the phone is ok first. Thanks, Ive tried looking but nothing seems to truely answer my questions.
gcarmichael said:
Hi guys. I bought an Xperia M to replace my iphone 4s. I love this phone, makes my old iphone look really craptastic speed wise. I went to do the bootloader unlock, things said they went well but now its stuck in a boot loop. Also if I flash a stock firmware on it does the boot loader stay unlocked if i use the same version that was installed? I have the fixed image to do the cwm recovery adn root, but want to know the phone is ok first. Thanks, Ive tried looking but nothing seems to truely answer my questions.
Click to expand...
Click to collapse
bro 1st boot after unlock takes times...if u want flash ftf...boot and leave for 0-30mins....dont wry once unlocked is unlocked forever until u manually relock
If you can enter cwm. I would recommend you to flash stock 4.3 using only your phone without pc. Go to development section and find the thread called back up stock and radios by bonoboo. Its so useful and less bricked pisibility.
Sent from my C1905 using XDA Premium 4 mobile app
Hey thanks. Is there a way to see if the bootloader is unlocked? I let it sit for more than a half hour (@ 45 minutes I ended up flashing it as I needed the phone to be a phone) and still didn't complete a boot cycle. I ended up flashing a stock 1.9 and now seems to be much happier. I understand how to flash the kernel, but havent done it yet.
Hi guys. I have the exact same problem. Used fastboot to unlock my bootloader, using the command
>> fastboot -i 0x0fce oem unlock 0xKEY
and it spit out
OKAY [ 0.074s]
finished.
But now the phone is stuck in boot loop.
Now I want to reflash the kernel on it. I found some kernel and downloaded it, and then tried to do
>> fastboot flash kernel kernel.sin
but I get command not allowed error. So I am really baffled. Since my bootloader is unlocked, I can't use Sony PC Companion either.
Some guidance or help would be greatly appreciated!!!
---------- Post added at 01:54 AM ---------- Previous post was at 01:18 AM ----------
HelmetBrain said:
Hi guys. I have the exact same problem. Used fastboot to unlock my bootloader, using the command
>> fastboot -i 0x0fce oem unlock 0xKEY
and it spit out
OKAY [ 0.074s]
finished.
But now the phone is stuck in boot loop.
Now I want to reflash the kernel on it. I found some kernel and downloaded it, and then tried to do
>> fastboot flash kernel kernel.sin
but I get command not allowed error. So I am really baffled. Since my bootloader is unlocked, I can't use Sony PC Companion either.
Some guidance or help would be greatly appreciated!!!
Click to expand...
Click to collapse
Here is an update. I flashed the CWM boot.ini and went to CWM. I noticed that when I wanted to wipe all data, I would get
Error mounting /data!
which may explain the boot loop.
Is there any way to fix this problem?
Thanks!
HelmetBrain said:
Hi guys. I have the exact same problem. Used fastboot to unlock my bootloader, using the command
>> fastboot -i 0x0fce oem unlock 0xKEY
and it spit out
OKAY [ 0.074s]
finished.
But now the phone is stuck in boot loop.
Now I want to reflash the kernel on it. I found some kernel and downloaded it, and then tried to do
>> fastboot flash kernel kernel.sin
but I get command not allowed error. So I am really baffled. Since my bootloader is unlocked, I can't use Sony PC Companion either.
Some guidance or help would be greatly appreciated!!!
---------- Post added at 01:54 AM ---------- Previous post was at 01:18 AM ----------
Here is an update. I flashed the CWM boot.ini and went to CWM. I noticed that when I wanted to wipe all data, I would get
Error mounting /data!
which may explain the boot loop.
Is there any way to fix this problem?
Thanks!
Click to expand...
Click to collapse
Flash the FTF from here if you have the XM single sim, or look for the ftf for XM Dual if you have the dual sim XM.
Esperos said:
Flash the FTF from here if you have the XM single sim, or look for the ftf for XM Dual if you have the dual sim XM.
Click to expand...
Click to collapse
Got my phone squared, can delete the thread.
I didnt get yet that how you solve your problem
gcarmichael said:
Got my phone squared, can delete the thread.
Click to expand...
Click to collapse
I didnt get yet that how you solve your problem
even I have a kind of similar problem, its even not entering into recovery mode or in fast boot mode or flash boot mode,
please help....
thanks in advance :good:
Prashant Pandey 22 said:
I didnt get yet that how you solve your problem
even I have a kind of similar problem, its even not entering into recovery mode or in fast boot mode or flash boot mode,
please help....
thanks in advance :good:
Click to expand...
Click to collapse
Try putting the battery out for 10 minutes and then try reflashing .ftf file
But sadly that sounds like a brick to me. Do the LEDs flash at anytime?
Sent from my C1905 using XDA Premium 4 mobile app
ya LED flashes
RedLedLight said:
Try putting the battery out for 10 minutes and then try reflashing .ftf file
But sadly that sounds like a brick to me. Do the LEDs flash at anytime?
Sent from my C1905 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ya red LED flashes 3 times when I try to switch on.
is it Hard Bricked ? if it is then can you please help me to unbrick it
Prashant Pandey 22 said:
ya red LED flashes 3 times when I try to switch on.
is it Hard Bricked ? if it is then can you please help me to unbrick it
Click to expand...
Click to collapse
Its not hardbrick you just need to charge it .when the red light Lights up leave it for 15 mins then power on your phone .
3 red light indicates that the phone cant turn on because theres no power to turn it on . Happened to me once .but i just plugged the charger then the red light appears and i leave it for 15 mins then power it on . then its done
now boot mode giving the problem
Farsiris said:
Its not hardbrick you just need to charge it .when the red light Lights up leave it for 15 mins then power on your phone .
3 red light indicates that the phone cant turn on because theres no power to turn it on . Happened to me once .but i just plugged the charger then the red light appears and i leave it for 15 mins then power it on . then its done
Click to expand...
Click to collapse
I have charged it and what i see now that it can be boot into fast boot mode or flash boot mode but it is unstable
I had boot it in flash mode and open the flash tool now what here I can see
14/028/2014 09:28:01 - INFO - <- This level is successfully initialized
14/028/2014 09:28:01 - INFO - Flashtool Version 0.9.16.0 built on 19-04-2014 19:00:00
14/028/2014 09:28:03 - INFO - Checking if changes have been made to devices folder.
14/028/2014 09:28:12 - INFO - Pulling changes from github
14/028/2014 09:28:13 - INFO - Devices sync finished.
14/028/2014 09:28:19 - INFO - Device connected in flash mode
14/028/2014 09:28:35 - INFO - Device disconnected
14/028/2014 09:28:40 - INFO - Device connected in flash mode
14/029/2014 09:29:41 - INFO - Device disconnected
14/029/2014 09:29:46 - INFO - Device connected in flash mode
14/030/2014 09:30:46 - INFO - Device disconnected
14/030/2014 09:30:51 - INFO - Device connected in flash mode
please help me to solve this
Prashant Pandey 22 said:
I have charged it and what i see now that it can be boot into fast boot mode or flash boot mode but it is unstable
I had boot it in flash mode and open the flash tool now what here I can see
14/028/2014 09:28:01 - INFO - <- This level is successfully initialized
14/028/2014 09:28:01 - INFO - Flashtool Version 0.9.16.0 built on 19-04-2014 19:00:00
14/028/2014 09:28:03 - INFO - Checking if changes have been made to devices folder.
14/028/2014 09:28:12 - INFO - Pulling changes from github
14/028/2014 09:28:13 - INFO - Devices sync finished.
14/028/2014 09:28:19 - INFO - Device connected in flash mode
14/028/2014 09:28:35 - INFO - Device disconnected
14/028/2014 09:28:40 - INFO - Device connected in flash mode
14/029/2014 09:29:41 - INFO - Device disconnected
14/029/2014 09:29:46 - INFO - Device connected in flash mode
14/030/2014 09:30:46 - INFO - Device disconnected
14/030/2014 09:30:51 - INFO - Device connected in flash mode
please help me to solve this
Click to expand...
Click to collapse
It is your usb cable or the usb slot.. thats a common problem for xperia phones.. try to put your phone higher than your pc so that the pressure of the charger will increase .and flash ftf.
And if this doesn't work, try a different USB cable.
Sent from my C1905 using XDA Premium 4 mobile app
RedLedLight said:
And if this doesn't work, try a different USB cable.
Sent from my C1905 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
+1 ..
Farsiris said:
+1 ..
Click to expand...
Click to collapse
What?
Sent from my C1905 using XDA Premium 4 mobile app
RedLedLight said:
What?
Sent from my C1905 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I assume you haven't used Google Plus. He is agreeing.
theperson333 said:
I assume you haven't used Google Plus. He is agreeing.
Click to expand...
Click to collapse
Yea I was living under a rock ;P
Sent from my C1905 using XDA Premium 4 mobile app
Esperos said:
Flash the FTF from here if you have the XM single sim, or look for the ftf for XM Dual if you have the dual sim XM.
Click to expand...
Click to collapse
Flash stock rom using flash tool.
After the boot loader unlock, I flashed the stock rom, then the cwm kernel, and then rooted it. I freaked out at first as I thought I bricked it. After giving it 25 minutes after the unlock process, did the above. It works fine and has given me 0 problems.