im installed yesterday joeldroid on my note 2
but im getting a notification that se for android is disabled
when i click on it it asks to reboot. but my cwm starts wen im reboot my phone again i get a screen with:
firmware update is not correctly installed or somthing
the second time i tried this it boots again in my cwm after the 2nd reboot i get note 2 screen and freezes
after my 3rd reboot my phone starts
please help me
Greets tarbax
Related
I have updated to JPC everything ok, howver erytime i turn my phone off it does not boot up to properly.. i get teh galaxy flash screen then it vibrates and just hangs at a black screen
Now i go into recovery mode do a full clear cache and factory reset and it works fine. I can turn teh phone of and back on and it reboots ok.....
The problem is when the phone is on for three hours or more and i turn teh phone off and back on it goes back to the black screen afterthe galaxy flash message at the start.....
Rhforrester said:
I have updated to JPC everything ok, howver erytime i turn my phone off it does not boot up to properly.. i get teh galaxy flash screen then it vibrates and just hangs at a black screen
Now i go into recovery mode do a full clear cache and factory reset and it works fine. I can turn teh phone of and back on and it reboots ok.....
The problem is when the phone is on for three hours or more and i turn teh phone off and back on it goes back to the black screen afterthe galaxy flash message at the start.....
Click to expand...
Click to collapse
come on guys this must be a known issue... I have tried re flashinh to JP3 and JP1 and JM1 and everthing is ok after I flask but after I turn teh phone of i get the black flash screen with galaxy ,,,,,,, the phone vibrates and it does not reboot.....
I have tried all the factor reset and clear cache...... it seems when i upgraded my firware throiugh kies it has done somthing to the start up screen... I have even tried reflashing in odin an di still get the same issue... help
Try rerepartion and reflash it again, see if the problem persists
Just boot in recovery and restore to factory
Simple.
Weird, I thought I had a working flash (been running for a couple days now) but I turned on compatability mode in settings and restarted.... black screen and 1 - 3 vibration pattern, WTF! Factory reset didn't fix it either, reflashing now :/
I had the same problem and someone posted from another thread that its the samsung task manager updated version 1.14 that is causing the problem. Wiped my phone, installed and updated all my apps except samsung task manager, rebooted my phone and all went well.
Edit: thanks to duracellbunny for finding the app that causing the problem.
Sent from my GT-I9000 using Tapatalk
thanks guys..... working now as mentioned above did not install task manger .
phone rebooting fine as mentioned at start it does work after a factory rest/cache but I always updated all that apps after a factory reset...... this is the problem as I apdate the taskmanager app and this has been the problem
thanks to antz88c for the post duracellbunny for finding the fault...
same here thats actually the last straw that gets me to downgrade to 2.1. I beileve its the samsung app that causes it. factory reset fixes it
Updating Task Manager from Samsung Apps causes this issue.Don't update this app!
Ive got access to Clockwork Mod Recovery i tried to install cyanogen from install zip menu in CMR and my galaxy just boots to the Galaxy s logo with the triangle at the bottom and wont go any further, I can get in to download mode and in to CMR but thats it.
What do i do? Please im crappin my self ive broke my S2
update
Infact now when i turn it off then back on its just booting to the logo then going straight to CMR screen unless i chose reboot from CMR option
Ive re-flashed my phone with CF-Root-SGS2_XW_CLK_KF3-v4.0-CWM4.tar using odin and it just restarts and gets stuck on the galaxy s 2 logo witht he triangle and does nothing.
### FIXED ###
Flashed with ODIN 3.8 with seperate PDA, PHONE and CSC files and its fixed it,Flashed with 2.3.4 from this tutorial incase anyone els hase this problem.
Thank GODDDDD
As it seems - every third or fourth software upgrade fails somehow. At least you can get to download mode again and try again.
Ok
i updated the firmware with odin last version to this OFW T210XXANC2_T210OXXANC2_T210XXANC2_HOME.tar.md5
All worked fine and the tablet kept the data, etc.
Now i installed the cwm and the 'android-armeabi-universal-root-signed.zip' from it.
For some reasson the tablet now is bricked for unknown reassons and its screen doesnt respond to finger touchs.
The tablet buttons and sound and booting works, but because the screen doesnt detect touchings, i cant do anything.
I have tried to install other cwm versions etc, and to reinstall the firware, and also that pre-rooted firmware on this forums, reset factory from cwm, etc. No success unfortunatelly.
Please help
anybody ?
i have installed kitkat firmware, the screen doesnt respond touchs
i have installed last jelly bean firmware, the screen doesnt respond
i have installed stock firmware, stucked in the samsung logo
help !
rotation sensor works, buttons works.
same problem ....
arfgh said:
anybody ?
i have installed kitkat firmware, the screen doesnt respond touchs
i have installed last jelly bean firmware, the screen doesnt respond
i have installed stock firmware, stucked in the samsung logo
help !
rotation sensor works, buttons works.
Click to expand...
Click to collapse
You have installed a rom for ROmanian Tab 3 7' Wifi, if you rezolved the problem please let me know how you did it becouse i have the same proplem and i tried everything , i try to install - uninstall a lot of ROM'S Kernel but no response the TAB3 is suck in Samsung logo or TAB 3 Logo . Please Help with a working rom or kernel ...
I had this when playing around with stock kit kats italy to france holland then back to stock jely bean then nole kat rom
Flash the stock firware for yhe tab with odincheck auto restRt and ftime is only on
Right after its near the end off flashing its gonna reboot keepp cable connect still
And hold home button and volume up when it turns off from downloading screen
get in stock recovery mode wipe cache and factory wipe
And reboot system
As its reboot hold home and volume down to get downloading screen
check at top thats its both offical if yes power off and start up
If no reflash again and do the same then it work to setup
Most off the time 2 flashes off stock does the job
ok, so my tab keeps restarting. heres what is going on
it started popping up this error of systemui has stopped followed by a few others cant remember off the top of my head.
thats not the real issue though, the problem is every time i tap "ok" my tab restarts itself.
i have wiped everything and restored with kies, i have have wiped everything and installed every rom i could find on the net and nothing works. it just constantly restarts and sometimes it just stays on the boot logo untill the battery dies or i power it down. i can flash twrp and flash any rom to it with no problem download mode works fine i have flashed roms with kies, odin, and through recovery, nothing gets it going. please any help would very appreciated
Hey everyone,
For the past 2 weeks im not able to update my miui 10 8.11.15. I see the pop ups where it says a new update is available, i click on it, download it and as soon as I press reboot my screen turns off, goes to the updating miui installation progress but then my phone turns on again after 2 seconds. When my phone turns on again, it says failed to update miui. This is happening for the 8.11.23 update and 8.11.29, my phone is NOT rooted and the only thing i modified is camera2api.
I would like some help , thanks
have you installed any custom recovery?
ThanosMit said:
Hey everyone,
For the past 2 weeks im not able to update my miui 10 8.11.15. I see the pop ups where it says a new update is available, i click on it, download it and as soon as I press reboot my screen turns off, goes to the updating miui installation progress but then my phone turns on again after 2 seconds. When my phone turns on again, it says failed to update miui. This is happening for the 8.11.23 update and 8.11.29, my phone is NOT rooted and the only thing i modified is camera2api.
I would like some help , thanks
Click to expand...
Click to collapse
If you have installed custom recovery like twrp, redwolf etc. to your device then you don't get the OTA Update.