Ok
i updated the firmware with odin last version to this OFW T210XXANC2_T210OXXANC2_T210XXANC2_HOME.tar.md5
All worked fine and the tablet kept the data, etc.
Now i installed the cwm and the 'android-armeabi-universal-root-signed.zip' from it.
For some reasson the tablet now is bricked for unknown reassons and its screen doesnt respond to finger touchs.
The tablet buttons and sound and booting works, but because the screen doesnt detect touchings, i cant do anything.
I have tried to install other cwm versions etc, and to reinstall the firware, and also that pre-rooted firmware on this forums, reset factory from cwm, etc. No success unfortunatelly.
Please help
anybody ?
i have installed kitkat firmware, the screen doesnt respond touchs
i have installed last jelly bean firmware, the screen doesnt respond
i have installed stock firmware, stucked in the samsung logo
help !
rotation sensor works, buttons works.
same problem ....
arfgh said:
anybody ?
i have installed kitkat firmware, the screen doesnt respond touchs
i have installed last jelly bean firmware, the screen doesnt respond
i have installed stock firmware, stucked in the samsung logo
help !
rotation sensor works, buttons works.
Click to expand...
Click to collapse
You have installed a rom for ROmanian Tab 3 7' Wifi, if you rezolved the problem please let me know how you did it becouse i have the same proplem and i tried everything , i try to install - uninstall a lot of ROM'S Kernel but no response the TAB3 is suck in Samsung logo or TAB 3 Logo . Please Help with a working rom or kernel ...
I had this when playing around with stock kit kats italy to france holland then back to stock jely bean then nole kat rom
Flash the stock firware for yhe tab with odincheck auto restRt and ftime is only on
Right after its near the end off flashing its gonna reboot keepp cable connect still
And hold home button and volume up when it turns off from downloading screen
get in stock recovery mode wipe cache and factory wipe
And reboot system
As its reboot hold home and volume down to get downloading screen
check at top thats its both offical if yes power off and start up
If no reflash again and do the same then it work to setup
Most off the time 2 flashes off stock does the job
Related
I have tried to install [ROM][N7105] AOKP JB 4.2.1 [PUB] [FeB - 5] & the Nightly's on my 7105. It soft bricks every time. It tries to reboot after installing the roms and then flickers twice or so and goes black and has no more activity till I take the battery out and put it back. I have to install the stock rom through Odin to get it going again. I always do a factory reset & wipe cache before I install. What might I do to run custom roms? Thanks in advance for any help.
Hi. I have the same problem on my N7100. I could not install any custom rom. Tried CM 10.1 + gapps ( full wipe and cache wipe before install ) after install and reboot system screen flicks 2 times and goes black without any response. Must return to stock via Odin . Tried several times... result is the same. Before Note 2 used S3 and never had such problems with installing CM10.1. Hope someone will help.
Sent from my GT-N7100 using xda premium
I used my Note i717 and installed rom's on it all the issues as long as I didn't flash the wrong ones.
Any help?
Sent from my GT-N7100 using xda premium
I reckon these phones must be too new for us to get help.
My N2 screen flickers as well, just pressed the sleep button after awhile, and unlock it as usual via home screen.
Hope it works for you too
Your screen flickers after you install custom rom?
Almost every ROM I flash I have issues around booting. Some boot up how they should, but MOST don't...
I flash the rom and then I boot. The Samsung Note 2 screen shows but then flashes all crazy and stuff a couple times and then goes blank. I just wait a while and after a minute or so I start pressing the power button, and the screen will come up as it should on the lock screen or if its a brand new rom it will be at the set up screen.
What helps me to know when it has finished booting, is to connect the phone via USB to my Macbook, and when it is booted the mac will ask me to allow it access to the phone.
Just don't worry too much about it, coz it is ok and will work. Another way to see if it is finished booting is to wave your finger over the menu and back button, and it will light up when the phone has booted; you just have to keep trying to wake up the phone with button presses, but don't go crazy and keep pressing and/or holding buttons
Is there any custom ROM's for the Hong Kong version of the 7105 that I can try since the others won't boot?
Already searched in some areas of the forum, but nothing helpful.
I have got a N7100XXDLL4 Note 2. It has a H3G Italian Rom (as i've taken in a H3G store).
All of those useless apps... it's an umbearable pain.
So... i decided to change that rom to another one.
I don't remember all the steps i've done... but surely i've used the toolkit of mskip and all go flawlessly. No Fails or something.
I've noticed that CWM (or TWRP) while loading causes a "tremolo" screen all vibrating on the first "Galaxy Note 2 Gt N7100" screen
nevermind...
Cwm loaded, full wipe, rom installed (ParanoidAndroid, to be precise) and rom started
I've noticed that the rom... in charging... doesn't show the bootscreen or welcome screen (it was all black, and i've got to tap on the capacitive buttons to understand if the device was on or off) then... pressing home buttons several times screen wake up in the pin code (without the classic config wizard).
Several soft reboot to get the rom doesn't manifest that black screen problem, nothing
Several tries to get the rom working properly flashed, but nothing
So... i don't remember all the steps i've done with the toolkit... but now changing roms it causes a stuck on the bootscreen/samsung logo
Tried to find a solution and someone used this thread, but again nothing useful.
I need a solution to perform a FULL reset of the phone (any rom, any firmware) with odin, kies, whatever.
Doesn't matter if the flash counter is down or not
Thanks for reading and sorry for my bad english
http://forum.xda-developers.com/showthread.php?t=2088809
Thanks in advance, i'll try it very soon
thanks mate... problem solved with Kies!!!
(it was stucked again in the blue pulsing logo, but once in recovery mode after a cache/data wipe, it started without problems)
Many many thanks... life solver ^^
Blackbeast said:
(it was stucked again in the blue pulsing logo, but once in recovery mode after a cache/data wipe, it started without problems)
Click to expand...
Click to collapse
Thats only you needed after flashing any ROM at first place.
Coming from a SGSII and never done a full wipe after flash
(always done before flashing.. good to know so i'm always learning)
thanks to all of you!
My Phone wont start at all i installed the stock rom via TWRP and after i pressed reboot it just wont start
power buttons unresponsive and i cant get into download or recovery
Tried battery out and in no luck
the samsung splash screen dosent even come up
just a black screen
What stock rom did you flash? 4.1.2 or 4.3?
Hi all,
I just rooted my G Pad on 4.2.2 and installed CWM 6.0.5.1, and then flashed the latest CM12 from their website. Now I'm stuck on the blue android loading screen. I've tried to get back into recovery, but I can't seem to boot into it with the key presses. It will show me the factory reset screen and then just tries to restart again. Any ideas on how to proceed from here?
EDIT: Was able to get into download mode and reflash stock 4.2. nothing to see here
Hey. Thought I should flash cyanogenmod 11 into my mom's phone. When I did it, realized that Ace couldn't connect to carrier for some reason. Anyways I decided to get back to stock GB. I've already tried to flash maybe four stock builds of GB and JB (they were all from "SamMobile") through Odin, but none of them really boot up, I get stuck at Samsung logo.
Recovery won't work, even if I flash a new one through odin ( f.e. this one: http://forum.xda-developers.com/showthread.php?t=2532591 )
Download mode does work.
I saw there was this 3-part GB installation file from a russian guy, which I should have used, but it's already deleted in "Yandex". I live in Lithuania, so I'm supposed to use SEB version of firmware. I was wondering could someone reupload it ?
I tried to fix Ace through Kies, but it says that GT-I8160 recovery isn't available for some reason...
Any answers greatly appreciated.
Thanks!
After flashing the sammobile rom with odin, if it doesn't boot, go to recovery (the original one coming with the original rom), and do a factory reset/wipe data. This helped for me.
The problem is that even if I try to enter recovery (power + vol up + home), it stays stuck at samsung logo
You can try to insist by continuing pressing the 3 buttons for recovery even if the phone reboot. If you're stuck in a boot loop, you can also try to remove the battery to switch it off and switch it on again by pressing the 3 buttons.
For me the odin flash of JB rom + recovery clean up always solved the problem. I don't know any other way.
galac44 said:
You can try to insist by continuing pressing the 3 buttons for recovery even if the phone reboot. If you're stuck in a boot loop, you can also try to remove the battery to switch it off and switch it on again by pressing the 3 buttons.
For me the odin flash of JB rom + recovery clean up always solved the problem. I don't know any other way.
Click to expand...
Click to collapse
Do the official ROMs (tar.md5) come with official recovery, or do I have to flash one seperately ?
The official ROM include an official recovery, you don't need to flash another one.
i too needed to go back to the stock from from cm11, because i cannot get wi-fi direct to work.
i flashed an xxmf1 rom, but when the phone rebooted, a message said samsung set up wizard has stopped, and i cannot get past it. this is even after doing a factory reset.
i went back to cm 11, and flashed the stock rom again. this time, the rom flashes in odin, but takes long to go from reset to pass, and windows now says hardware id is missing.
the phone goes black after the samsung logo, and cwm is still installed.
any help would be appreciated.
edit: fixed by flashing the three-part gb rom - http://forum.xda-developers.com/showthread.php?t=2141930
Turns out I disconnected my Ace 2 too early (dammit). As soon as I saw "RESET" in odin, I thought it has finished flashing and I disconnected it before it goes into recovery and flashes everything. Never thought I could be that stupid.
Thanks for replies tho :good::good::good: