Hey. Thought I should flash cyanogenmod 11 into my mom's phone. When I did it, realized that Ace couldn't connect to carrier for some reason. Anyways I decided to get back to stock GB. I've already tried to flash maybe four stock builds of GB and JB (they were all from "SamMobile") through Odin, but none of them really boot up, I get stuck at Samsung logo.
Recovery won't work, even if I flash a new one through odin ( f.e. this one: http://forum.xda-developers.com/showthread.php?t=2532591 )
Download mode does work.
I saw there was this 3-part GB installation file from a russian guy, which I should have used, but it's already deleted in "Yandex". I live in Lithuania, so I'm supposed to use SEB version of firmware. I was wondering could someone reupload it ?
I tried to fix Ace through Kies, but it says that GT-I8160 recovery isn't available for some reason...
Any answers greatly appreciated.
Thanks!
After flashing the sammobile rom with odin, if it doesn't boot, go to recovery (the original one coming with the original rom), and do a factory reset/wipe data. This helped for me.
The problem is that even if I try to enter recovery (power + vol up + home), it stays stuck at samsung logo
You can try to insist by continuing pressing the 3 buttons for recovery even if the phone reboot. If you're stuck in a boot loop, you can also try to remove the battery to switch it off and switch it on again by pressing the 3 buttons.
For me the odin flash of JB rom + recovery clean up always solved the problem. I don't know any other way.
galac44 said:
You can try to insist by continuing pressing the 3 buttons for recovery even if the phone reboot. If you're stuck in a boot loop, you can also try to remove the battery to switch it off and switch it on again by pressing the 3 buttons.
For me the odin flash of JB rom + recovery clean up always solved the problem. I don't know any other way.
Click to expand...
Click to collapse
Do the official ROMs (tar.md5) come with official recovery, or do I have to flash one seperately ?
The official ROM include an official recovery, you don't need to flash another one.
i too needed to go back to the stock from from cm11, because i cannot get wi-fi direct to work.
i flashed an xxmf1 rom, but when the phone rebooted, a message said samsung set up wizard has stopped, and i cannot get past it. this is even after doing a factory reset.
i went back to cm 11, and flashed the stock rom again. this time, the rom flashes in odin, but takes long to go from reset to pass, and windows now says hardware id is missing.
the phone goes black after the samsung logo, and cwm is still installed.
any help would be appreciated.
edit: fixed by flashing the three-part gb rom - http://forum.xda-developers.com/showthread.php?t=2141930
Turns out I disconnected my Ace 2 too early (dammit). As soon as I saw "RESET" in odin, I thought it has finished flashing and I disconnected it before it goes into recovery and flashes everything. Never thought I could be that stupid.
Thanks for replies tho :good::good::good:
Related
I am not new to the concept of rooting and loading a custom rom. This is the 3rd android phone that I have bothered with. However it is the first one I have had to use Odin to root or push files to.
I have used CarpeNoctem's writeup on how to root and utkanos' CWMR port writeup. Ofter verifying I had root, I decided I would try out Carpe's OsiMood. No problem right? Here is where I am wondering what if anything went wrong on the previous steps.
I made a back up ofter finally getting it to recovery mode, and when I tried flashing the new rom, it would not complete the process.
As it sits, when I choose recovery from CWM it reboots to the android with triangle screen(see attached video). What concerns me is the lack of fluidity into the recovery, the fact that it loads in only after the battery is removed and the phone is turned back on and lastly that I cannot flash a new rom.
It appears as though I need more posts to add my link for youtube.
Please add standard youtube weblink before this to watch the video.
/watch?v=qpQyQB1aozs
What would you recommend my first action be?
Thanks,
Steve
This also quite unfortunate for ROM manager, "somewhat", not working fully for the Glide (yet). I can't really go into 3e/CWM recovery with the app, but manually (volume down + power/lock button) has no problems. This also happens on my Captivate (SGH-I896/7), I need to restart the device for a second time to boot into recovery. As per your flashing issues, you might need to mount /system manually and then flash the ROM, when it fails, try and try again, always happens to me from stock rogers ROM. Also, if you have Titanium Backup, it now supports reboot device features (recovery and hard reboot)
Thanks for your insight. I tried volume down and power before but when I saw the samsung logo pop up I figured it wouldn't work.
I will try flashing again and report back. Thanks again.
-Steve
Tried flashing again, worked great. If only the glide had more support. Lol.
Currently running OsiMood.
Sent from my SAMSUNG-SGH-I927R using Tapatalk
gabby131 said:
This also quite unfortunate for ROM manager, "somewhat", not working fully for the Glide (yet). I can't really go into 3e/CWM recovery with the app, but manually (volume down + power/lock button) has no problems. This also happens on my Captivate (SGH-I896/7), I need to restart the device for a second time to boot into recovery. As per your flashing issues, you might need to mount /system manually and then flash the ROM, when it fails, try and try again, always happens to me from stock rogers ROM. Also, if you have Titanium Backup, it now supports reboot device features (recovery and hard reboot)
Click to expand...
Click to collapse
My glide does not boot. I can get into Download Mode. I can NOT get into de recovery mode. I think my NAND is corrupted.
How can I mount the /system partition? Because I flashed too many roms with ODIN, but nothing, still not booting, I get stuck in the samsung logo.
Use Odin to reflash recovery,you backups should still be there unless like you say maybe they got corrupted as well,but its worth a shot.
Here is a link to the latest,with instructions:
http://forum.xda-developers.com/showthread.php?p=34479219#post34479219
Kodiack99 said:
Use Odin to reflash recovery,you backups should still be there unless like you say maybe they got corrupted as well,but its worth a shot.
Here is a link to the latest,with instructions:
http://forum.xda-developers.com/showthread.php?p=34479219#post34479219
Click to expand...
Click to collapse
I've already flashed the stock recovery, the CWM, a lot of kernels, even I tried to flash the kernel and bootloader of the Galaxy S II, but nothing.
I'm starting to think that maybe is a hardware problem. Hope not, but I'm not moving foward.
If you havent already,pull out the sim and sd card.
Reboot your pc and download a fresh up to date Odin.
So when you flash it says it successful and then just doesnt boot?
I had a boot loop once ,had me stumped and it turned out to be my sd card was poached and caused the loop.
Kodiack99 said:
If you havent already,pull out the sim and sd card.
Reboot your pc and download a fresh up to date Odin.
So when you flash it says it successful and then just doesnt boot?
Click to expand...
Click to collapse
Exactly... It goes all over the process bar, says succesfull, the phone turns off, and nothing. The phone not even restart itself, I have to remove the battery, put it back again, and then it turns on, but just to show me the samsung logo.
I've used the ODIN version 1.85 and the new one 3.04. But nothing. This is so frustating.
---------- Post added at 04:23 AM ---------- Previous post was at 04:04 AM ----------
I've opened a thread with all the symptoms of my bricked phone:
http://forum.xda-developers.com/showthread.php?t=2035742
Please, tell me there is a solution...
There are one alternative to boot
1. Shut down and then restart phone in recovery mode. For the Samsung Captivate Glide, this required pressing the power, volume down and home keys all at the same time.
2. The initial screen which appears gives you a choice of loading a replacement OS (volume up) or entering recovery mode (volume down). Note you have to hold the volume down key for several seconds before the recovery mode menu appears.
Hi all,
I'm new to android. I did root my note 2 using the instruction by dr.ketan. I used method#1, flashing with changelu's cwm6-root-note2.tar, everything was successful. However, I can not boot into cwm recovery. I tried press and hold vol up+home+power when the text samsung galaxy note ii appeared let go the power, but nothing happen. My device would reboot again. I tried to use rom manager to reboot to the recovery, the device would show the samsung galaxy note ii and keep rebooting. Any tips on accessing the cwm recovery?
As I could access the download mode just fine, I will tried to reinstall the stock rom again and hope that it will be normal again.
I used stock rom, namely the N7100XXALIE_N7100OLBALI9_THL, and changelu's cwm6-root-note2.tar
One more thing about OTA, from what I understand, if I rooted with stock rom then using TriangleAway to reset the counter.
I will still have System Status: Custom which I read that it could be set to Official by using cwm then clear cache and wipe the device.
With binary counter: no, everything else is official, will I be able to update using OTA?
Thank you,
beau
Have you reset counter?
to boot into recovery it's necessary to press the power button only till the "galaxy note2" screen comes up, then you have to hold the vol button and the center button until the recovery shows up. maybe you'll have to try it one or two times to get the proper timing, after you've done it a few times you're into it!
regarding the reboot issue:
i had this on several devices sometimes, i fixed it always by reflashing kernel and recovery. so don't panic, its no brick for sure! had this today when i swapped my note2 for another one (due to display flaws, same old story as with sgs2 and note1). after rooting the new one i could not shut down the phone, after restoring the nandroid all was fine again!
hope that helped!
Update on my status:
I just finished reflash the stock rom. Everthing seems normal now. I just saw in dr.ketan thread that someone else also had the same issue, can't boot into recovery after using triangleway to reset the counter.
Thanks dr.ketan & TML1504 :good:
But i can't fix my problem.my phone always logo hang on startup.i try to recovery mode but phone not getting to recovery.
I think its another soft brick.i try kerner,cwm recovery & 5 different version of firmware but ODIN just says fail & there is no pit partition.
4 times Pm to dr.ketan but he also Silent.
What to do now?
I was using PA rom for a few months and everything was fine until my gnex suddenly bootloop for no reason. Wasn't flashing a new rom, or tweaking anything. Phone just crash and when i try to reboot it, it just stuck in a bootloop. Showing google, then animation screen and afterwards reboot again back to google and animation and keeps repeating.
Phone info:
-rooted
-bootloader unlocked
-on custom rom (PA ROM)
Attempt to fix problem:
-flash a diff rom ( still boot loop )
-factory reset,wipe system cache etc. ( still boot loop )
-flash factory image 4.3 ( still boot loop ) [All is done through adb, manually flash each radio,bootloader, system etc one by one ]
-flash factory image 4.0 ( still boot loop )
So currently i'm on stock android, stock recovery, stock bootloader, stock baseband etc. But it is still bootlooping, anyone know what can i do?
ps, i did search through the forum, most people got pass this problem through flashing stock image, but mine doesn't
did you erase and then flash userdata?
Similar to my problem, hope it someone knows an answer.
Same problem!
Not to hijack your thread, but I'm having the same problem -
My phone was charging and working fine. I left the room and came back and the phone was stuck at the "Google" bootloader screen. I pulled the battery and reinserted. It went to the Cyanagen boot animation, then froze. Subsequent battery pulls resulted in it freezing at the Google screen.
I can not access recovery (power + vol up + vol down), but I can access the Odin download screen (power + vol down). Odin will connect to my phone, but I can't reflash the stock firmware. After attempting to flash the firmware my phone shows the phone-triangle-computer screen regardless of what buttons I push during start up. I can still connect to Odin, but can't reflash stock. I receive the "complete write failure" message each time. I've tried switching USB ports and USB cords without success.
Sprint SPH 700
Rooted with bootloader unlocked
Running Cyanagen ROM
Any tips? Do I need to reload the PIT file? Thank you!
TSRibeye said:
Not to hijack your thread, but I'm having the same problem -
My phone was charging and working fine. I left the room and came back and the phone was stuck at the "Google" bootloader screen. I pulled the battery and reinserted. It went to the Cyanagen boot animation, then froze. Subsequent battery pulls resulted in it freezing at the Google screen.
I can not access recovery (power + vol up + vol down), but I can access the Odin download screen (power + vol down). Odin will connect to my phone, but I can't reflash the stock firmware. After attempting to flash the firmware my phone shows the phone-triangle-computer screen regardless of what buttons I push during start up. I can still connect to Odin, but can't reflash stock. I receive the "complete write failure" message each time. I've tried switching USB ports and USB cords without success.
Sprint SPH 700
Rooted with bootloader unlocked
Running Cyanagen ROM
Any tips? Do I need to reload the PIT file? Thank you!
Click to expand...
Click to collapse
I finally got thru the phone to pc fail screen by using a older version of Odin(3.04).Then the flash went thru w/o a hitch. Is your PC recognizing the Phone? If not the drivers may need to be uninstalled and reinstalled. I had to use the samsung usb cord and no other also.
Zepius said:
did you erase and then flash userdata?
Click to expand...
Click to collapse
yup i did that....fastboot erase userdata and also fastboot erase data. still boot loops
Flash factory image via fastboot,
Sent from my maguro using xda app-developers app
bunodosoma said:
I finally got thru the phone to pc fail screen by using a older version of Odin(3.04).Then the flash went thru w/o a hitch. Is your PC recognizing the Phone? If not the drivers may need to be uninstalled and reinstalled. I had to use the samsung usb cord and no other also.
Click to expand...
Click to collapse
Yup, my PC recognizes the phone. I can push partial tar files (for example, recovery only) to the phone just fine. I'll try a different version of Odin. Thanks!
I've got a Galaxy Tab P5210 that's stuck in a constant boot loop. I flashed it with the correct stock firmware from SamMobile using Odin, but it fails to boot properly. It automatically boots to the stock recovery screen, but the problem is it will instantly reboot as soon as it reaches this screen. I see the dead android with the red triangle and exclamation point for just a second, and it instantly reboots. Is that normal? I don't think that's normal. From what I've been reading, this screen is supposed to stay there until you push the volume keys to bring up a menu, but it reboots so fast that I don't have a chance to even push anything.
I've tried flashing it with other recovery images. I tried using CWM, and it almost worked. With that, as soon as the tablet booted, I'd see the CWM splash screen, and it would instantly reboot. Similarly to how it's booting now but with stock recovery.
I'd like to point out that I've never messed with anything like this before. I work in a computer/small electronic repair shop and a customer brought it to me. She ended up getting into stock recovery and a friend of hers did some serious damage in there which prevented it from booting properly. Normally we don't mess with things like this but, with it being how it was, I figured there was no way I could make it even worse than it already is by working on it. I thought if I flashed the original stock firmware back to it, it would fix it, but that looks like a no-go since it's still booting the same way it was when she first brought it to me.
Is this thing completely broken or is there still hope for it?
No - it should be recoverable. However - any data will most likely be lost.
When you flash with Odin, make sure only F. Reset Time is checked. Use Odin 3.07. Make sure again that firmware is correct before you flash. After it flashes, power off and then on again
Latest KK firmware for the US version of the 5210 is P5210UEU0CNK1_P5210XAR0CNK1_HOME.TAR
Good luck. If you're trying to root, then there are threads in the 10.1 Dev section that should help
M,
this firmware was always my goto for device recovery/restoration https://www.androidfilehost.com/?fid=23060877490005046
posted by user chpettit , flash with odin 3.07
m
OKAstro said:
No - it should be recoverable. However - any data will most likely be lost.
When you flash with Odin, make sure only F. Reset Time is checked. Use Odin 3.07. Make sure again that firmware is correct before you flash. After it flashes, power off and then on again
Latest KK firmware for the US version of the 5210 is P5210UEU0CNK1_P5210XAR0CNK1_HOME.TAR
Good luck. If you're trying to root, then there are threads in the 10.1 Dev section that should help
Click to expand...
Click to collapse
Not interested in rooting, just wanna get the stock firmware back on. Maintaining data isn't a necessity, the customer just wants it back in working order. I tried using that firmware, but I had Auto-Reboot checked.
EDIT
Yeah, it's still doing the same thing. When I first boot it up post-firmware flash I see an Android with a loading bar underneath it, and then it reboots. When it boots again, I see the same Android and then it suddenly changes to the dead one with the red triangle. Maybe I'm just doing something wrong here with the button presses following the flash?
EDIT2
It looks to me like the stock recovery image is just broken, since the tablet just automatically reboots the instant it attempts to load it up. Flashing a new firmware replaces that though, so I don't know how or why it would even be corrupted. Odin reports no errors, so I don't know what's going on. And every guide I'm reading with fixing bootloops all say "go into stock recovery and clear the cache", but I can't even boot into stock recovery. It's like it's not even there. And I know it's not a power button issue causing it to shut down, I can power the device off fully with it, and it will stay off until I press it again. I'm banging my head against the desk here.
What if you flashed a TWRP recovery in Odin. Then if that's successful, boot into recovery and wipe/format everything except ext SD, Then try the ODIN flash again with filr your stock tar
I'm having the same problem and that didn't work for me. It shows the twrp splash screen and reboots. I'm looking for the .pit file it has to be the recovery partition right?
Sent from my LG-D851 using Tapatalk
I did a search and maybe not correctly but I did not find my particular problem.
So I have stock root66 rom flashed with odin 3.11 on my phone goes into boot loop.
I flashed twrp 3.1.1-0 with odin and I can go into recovery but as soon as I select any rom (OCT-N-WEEKLY-20170811-1427-d2tmo) it starts to do something and just reboots the phone and back into the boot loop. I reboots to fast for me to even figure out what it says on the phone.
Has anyone else experienced this? Battery is charged to 80%+
edit: tried CWM same symptoms reboots right away. Only thing I can flash with is odin otherwise with any recovery reboots right away. I was able to flash a modem with twrp and that works but no roms work.
update 2: I finally was able to get root66 installed. Gets to the set up part. Once I finish the setup the phone turned off on its own. It never turns on on its own so leads me to believe the power button isnot stuck but why does it turn off on its own? I turned back on and goes into bootloop.
The power button may be stuck in the "pressed" position.
Have you tried TWRP 2.87? You're sure you are flashing the correct TWRP version for the phone?
audit13 said:
The power button may be stuck in the "pressed" position.
Have you tried TWRP 2.87? You're sure you are flashing the correct TWRP version for the phone?
Click to expand...
Click to collapse
Thanks for the reply. I have tried 6.0.1.2_CWM_Touch-recovery-image & twrp-3.0.2-0-d2tmo.img but not 2.87.
However, as I stated above I was able to flash a modem but just not flash any roms which is weird.
If the power button pressed and the phone reboots when i pull the battery and put back in wouldn't the phone turn back on? I'm just finding it odd the phone keeps rebooting but when I pull the battery and put back in it doesnt turn on automatically.
update: So 2.8.6 twrp worked which is odd installing as we speak phone has not rebooted yet so lets see how it does once rom is flashed. I did odin root66 and after that installed it kept rebooting so fingers crossed this works. Using OCT-N-WEEKLY-20170811-1427-d2tmo hopefully this works
so after the flash seems to just back to the bootloop. I'm still not convinced my power button is stuck since it doesnt auto turn on and during the whole process of flashing it didnt reboot on its own only after the flash. Any ideas?
Literally gets to the samsung galaxy siii logo and reboots right away.
Try flashing the latest stock ROM, not a rooted stock ROM.
audit13 said:
Try flashing the latest stock ROM, not a rooted stock ROM.
Click to expand...
Click to collapse
same bootloop. Gets to the tmobile animation and then reboots.
It's possible that the memory chip is damaged. You could take it to a repair shop and have it flashed via jtag.