Hello, I have a problem with my SCH-R760, I really want to root it, but whenever I plug it to my computer, it says "MTP Connected" but it doesn't show up on the computer. I have tried the mass storage thing in the settings, but it doesn't work. It says connect USB to use mass storage, when I connect it, the dialog message just disappears without connecting me.
Do I have to buy a special cable? I know I have the right drivers, I got them from Samsung.
Sent from my SCH-R760 using Tapatalk 2
Adan_Jr said:
Hello, I have a problem with my SCH-R760, I really want to root it, but whenever I plug it to my computer, it says "MTP Connected" but it doesn't show up on the computer. I have tried the mass storage thing in the settings, but it doesn't work. It says connect USB to use mass storage, when I connect it, the dialog message just disappears without connecting me.
Do I have to buy a special cable? I know I have the right drivers, I got them from Samsung.
Sent from my SCH-R760 using Tapatalk 2
Click to expand...
Click to collapse
Wrong forum, bro.
Try here:
http://forum.xda-developers.com/showthread.php?t=2388433
Also check our the Team US Cellular site. Some fine devs and themes. Buckleberry has some nice inverted apps, and the only inverted Skydrive I've found.
Good luck.
Sent from my SM-N900P using Xparent BlueTapatalk 2
Related
i am trying to connect my phone to my computer but when i connect it the option that says usb debugging comes up but the options for charge only, disk drive, etc.. dont come up..
quikswitch said:
i am trying to connect my phone to my computer but when i connect it the option that says usb debugging comes up but the options for charge only, disk drive, etc.. dont come up..
Click to expand...
Click to collapse
Firstly, what rom are you running? Have you tried a different usb port on your computer? Ive run into this problem a few times, but usually if I plug into a different usb port it shows me the options.
Are you saying you don't get the pop up notification? If so just slide your notification bar down and change it from there...not too sure what you mean but hope that helps
Sent from my PC36100 using XDA App
I just bought a galaxy s2 running stock gb on ebay and whenever I plug it in any pc it only charges. There is no usb notification nor does computer play a sound when the phone is connected. The phone makes a sound and just charges no matter what I do, I have tried usb debugging on/off and nothing. When I go into wifi/connection settings and select usb mode it says to connect a cable when the usb cable is already connected. I have tried many usb cables including the original samsung one.
Did I just buy a defective phone or am I missing something?
You need the drivers, either Google it or wait for someone to post a link, your call.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
http://bit.ly/QOTfdW
Try all usb ports as well! Even without the drivers you should still be able to use it as mass storage device
Sent from my SGH-T989 using xda premium
Are you using the right cable?
OneOneSix said:
I just bought a galaxy s2 running stock gb on ebay and whenever I plug it in any pc it only charges. There is no usb notification nor does computer play a sound when the phone is connected. The phone makes a sound and just charges no matter what I do, I have tried usb debugging on/off and nothing. When I go into wifi/connection settings and select usb mode it says to connect a cable when the usb cable is already connected. I have tried many usb cables including the original samsung one.
Did I just buy a defective phone or am I missing something?
Click to expand...
Click to collapse
Are you using a data cable and not just a regular charging cable? You still see the option to connect mount the SD card evn without the drivers.
OneOneSix said:
I just bought a galaxy s2 running stock gb on ebay and whenever I plug it in any pc it only charges. There is no usb notification nor does computer play a sound when the phone is connected. The phone makes a sound and just charges no matter what I do, I have tried usb debugging on/off and nothing. When I go into wifi/connection settings and select usb mode it says to connect a cable when the usb cable is already connected. I have tried many usb cables including the original samsung one.
Did I just buy a defective phone or am I missing something?
Click to expand...
Click to collapse
I'm not sure if this works on stock gb buy try going to settings/storage. Then press menu and if another settings option comes up then go there and see if there is an option to mount as mass storage device
Sent from my SGH-T989 using xda premium
Having the same issue, can it be that I am using a backed up ROM? I know that there are times when having a backed up ROM changes your system to R/O instead of R/W
---------- Post added at 06:12 PM ---------- Previous post was at 06:09 PM ----------
MY PC basically does three quick beeps, like the ones it would make when connecting to the phone.... the only difference is when properly connected it would make one beep. I have 6 USB ports and have used all of them. In Root Explorer it states "Cannot detect SD card" that happened after i clicked on SD card to see what files were there.
I did a fresh flash of a ROM and now I am not having issues connecting to PC.
similar problem
I have the same problem of my gs2 not connecting to the computer. The only difference is that it isn't new, and I've been connecting to the computer using the exact same cord for a while.
I'm not really sure what the problem could be, it was working fine as recently as yesterday
Had the same issue I had to send it in for repairs USB port on the phone was effed up
Sent from my SAMSUNG-SGH-T989 using xda premium
Download kies and confirm cable is include data transfer
Sent from my SAMSUNG-SGH-T989 using xda premium
Galaxy s2 not don't detect on pc
JBMe94 said:
Download kies and confirm cable is include data transfer
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
Hi. I have the same problem on my galaxy s2. running jelly bean. it all started after i updated the new firmware. when i connect my phone to my pc it does nothing. it only charges. iv'e done everything i can think off. installed Kies. changed cables. changed Pc's. tried on my laptop nothing its not picking up anything.even went into the USB utilities and it says connect USB cable to use mass storage. . it keeps on saying that. iv'e tried the debugging thing switch it on and off it doesn't work. i have even dialed *#7284# and my device is on PDA. like i said i have tried everything and no luck . Help
OneOneSix said:
I just bought a galaxy s2 running stock gb on ebay and whenever I plug it in any pc it only charges. There is no usb notification nor does computer play a sound when the phone is connected. The phone makes a sound and just charges no matter what I do, I have tried usb debugging on/off and nothing. When I go into wifi/connection settings and select usb mode it says to connect a cable when the usb cable is already connected. I have tried many usb cables including the original samsung one.
Did I just buy a defective phone or am I missing something?
Click to expand...
Click to collapse
Install moboro on ur PC, make sure developer options is enabled, and debugging is ticked, moboro will install needed drivers for phone to be seen, check to see if the phone is rooted y downloading root checker from play store, if it is rooted it may be an issue with the rom, try downloading Odin and putting the phone in download mode, Odin should see the device and say "added", if so go to sammobile.com find ur devices newest firmware and DL the file, use odin to flash the firmware on the phone, should solve all issue, u can also use Odin without being rooted too so, if u need more info, links or whatever, just let me know
Sent from my SGH-T989 using xda premium
WARNING
I had the same problem about a month ago. I had sent it to Samsung and they replaced the USB part of my phone. So if nothing works, DON'T PREFORM A FACTORY RESET IF YOU'RE ON STOCK! THAT CAN MAKE YOU STUCK ON A BOOT LOOP! but if you're lucky then everything will work fine. I only say this because it happened to me.
Just came back from holiday so I've got some pictures to store on my computer, but I can't get my phone to connect to it. It charges fine when connected which is also bemusing, since it can't do anything else. It's definitely not my computer's problem as I've tried other computers to no avail. I've been looking around the internet but none of the solutions worked for me.
My Nexus is rooted with stock ROM on 4.2.1 Jelly Bean and hasn't had many other problems in it's lifetime, although sometimes when I go into the Gallery app it will tell me "No external storage available" and I cannot use it until I restart the phone, where the problem diminishes and reappears after a few days. I was wondering if these problems were linked in any way perhaps?
Thanks for any input guys, would really appreciate it
FullSpe3d said:
Just came back from holiday so I've got some pictures to store on my computer, but I can't get my phone to connect to it. It charges fine when connected which is also bemusing, since it can't do anything else. It's definitely not my computer's problem as I've tried other computers to no avail. I've been looking around the internet but none of the solutions worked for me.
My Nexus is rooted with stock ROM on 4.2.1 Jelly Bean and hasn't had many other problems in it's lifetime, although sometimes when I go into the Gallery app it will tell me "No external storage available" and I cannot use it until I restart the phone, where the problem diminishes and reappears after a few days. I was wondering if these problems were linked in any way perhaps?
Thanks for any input guys, would really appreciate it
Click to expand...
Click to collapse
You tried a different USB cable? Just a thought...
Is USB fast charge enabled?
I had the same problem - turns out it wouldn't connect on my PC's front USB ports, but does work on the rear ones.
first be sure that fast charging is disabled, second try other usb port if not try other usb cable if not try another computer, if not...i dont know!
Maybe usb-debugging is on and your PC has a driver Problem with usb-debugging?
Else: Go to device management and look if the device is properly shown also galaxy nexus.
Else2: I don't know. Maybe open the window and throw your PC as far as you can
Sent from my Galaxy Nexus using xda app-developers app
lag3o said:
Maybe usb-debugging is on and your PC has a driver Problem with usb-debugging?
Else: Go to device management and look if the device is properly shown also galaxy nexus.
Else2: I don't know. Maybe open the window and throw your PC as far as you can
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
That cannot be the issue. I did not have USB debugging enabled but I was still able to transfer the files. But, you can try re-installing the Google USB Driver or Samsung Driver for I9250 or was it I515?
Cheers
Check on computer that device is showing in devices and has correct drivers installed. If not samsung official manuals and downloads website (google it) has a driver pack (approx 30mb) which when installed should have every samsung driver you could need, download and run then reboot computer and plug in phone, all drivers needed should now install correctly.
Also check in usb options when first connected that mtp is checked so storage is visible to computer. Best of luck and if all else fails pc out of window sounds like fun
P.S. try flashing latest gapps to fix gallery issue, after dalvik and cache wipe, may solve gallery issue...
sent via xda premium from starkissed noozxoide maguro gnex paranoid beta9.5
hi guys am facing this problem after the new update i cannot connect my note 2 to my laptop through usb cable i changed the cable download the samsung driver turned off the anti virus reboot the laptop and the phone i did factory reset to the phone i even connect it to a different laptop but still the same problem its just charging not making any data or media connection it does through the wifi not through the usb cable
Maybe try over n over again it takes me like 10 tries so my computer can recognize it
Sent from my SPH-L900 using Tapatalk 2
I have the same issue. The most reliable way I find is to remove all drivers for the phone from the PC. Connect it, and just let Windows install part of the drivers. It will not install the Samsung drivers, but will connect reliably via USB. I did on thread a while back on it: linky. It's a limited solution because of the lack of Samsung drivers, there is no ADB access.
There is some issue with the Samsung drivers not have the correct hardware reference or something. I think it's tied into Kies, but I've had Kies installed and still had issue. Plus, since Google changed how the storage is organized to allow for difference user profiles, the phone does not work like normal USB thumb drive anymore. I use it to store school projects, and I have to copy and paste them from the phone to the PC and vice versa; not all files require this. Some are can be accessed while stored on the phone on the PC.
I can almost guarantee you're using Windows 8 .... and it has something to do with the driver signature stuff
Sent from my SPH-L900 using Xparent BlueTapatalk 2
Thanks guys for sharing ideas but nothing really worked out I will take my phone n laptop to best buy coz I bought them both there n let them figure it out ..will get back with solution
Here is your fix ....search is your friend
http://forum.xda-developers.com/showthread.php?t=2127257
Sent from my SPH-L900 using Xparent BlueTapatalk 2
Epix4G said:
Here is your fix ....search is your friend
http://forum.xda-developers.com/showthread.php?t=2127257
Sent from my SPH-L900 using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
thanks folks for your help i did take both my laptop n note 2 to bestbuy and they fix soething in my window about driver signutre or something like that so i guess you were right my friend the right solution is the one this guy above suggested ..thanks again for all
When I plugin the S3 (Sprint non rooted) I no longer get the option for mtp or ptp. I suspect it may have happened after updating to 4.1.2. Ive tried multiple pcs and usb cables. To make it even worse, it works on my note 2 for sprint. Any help is something
I don't have my phone hooked up to my computer at the moment, so this might be a little vague.
I've had this happen a number of times. Plug your phone into the computer via USB and go into the Windows Device Manager (assuming you're running Windows) and uninstall the driver for your phone. Look for something like "Samsung Android Phone" or something like that.
If there is an option to delete the driver DO NOT delete it, since we want don't want to remove it from the computer.
After it's uninstalled, unplug your phone from USB and then plug it in again. Windows should do its automatic driver thing, and hopefully you'll be back in business.
Hopefully this helps. Good luck!
Also make sure you turn usb debugging off prior to connecting the phone.
Sent from the future via Tapatalk 4
If you have drivers installed and is still not working go to your dialer and do ##diag# click cdma then use setting make sure it's set to mtp + adb
Sent from my SPH-L710 using Tapatalk 2
Apeleon said:
If you have drivers installed and is still not working go to your dialer and do ##diag# click cdma then use setting make sure it's set to mtp + adb
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
+1
This is what it should look like after you hit "Qualcomm USB setting"
The Thanks button is just to avoid "THANKS" posts in threads. Don't defeat the purpose of why it was introduced.