I had downloaded the NOS 2.0.0 and flashed it. but how to update to NOS 2.0.1?
neptune2yu said:
I had downloaded the NOS 2.0.0 and flashed it. but how to update to NOS 2.0.1?
Click to expand...
Click to collapse
as soon as you flash 2.0.0 without rebooting, flash 2.0.1 on top of it. At least that's what I did and it worked without a hitch.
hac rupunl
neptune2yu said:
I had downloaded the NOS 2.0.0 and flashed it. but how to update to NOS 2.0.1?
Click to expand...
Click to collapse
Download the NOS 2.0.1 Zip and place on internal SD card. Boot to recovery and flash the zip. Wipe cache and dalvik then reboot.
mademan420 said:
as soon as you flash 2.0.0 without rebooting, flash 2.0.1 on top of it. At least that's what I did and it worked without a hitch.
Click to expand...
Click to collapse
yes, I flash 2.0.1 on top of 2.0.0, but it alway 2.0.0...
reboot, recovery, sideload, adb flash 2.0.1?
Related
Guys today I tried installing MIUI v4. I followed all the steps mentioned in the thread. I installed everything properly but my phone is stuck onthe android logo. This happened when I rebooted my phone after installing MIUI. So please tell me what is the problem. Also when I am truing to restore some type of error is cropping up. Please help.
pranjaldixit said:
Guys today I tried installing MIUI v4. I followed all the steps mentioned in the thread. I installed everything properly but my phone is stuck onthe android logo. This happened when I rebooted my phone after installing MIUI. So please tell me what is the problem. Also when I am truing to restore some type of error is cropping up. Please help.
Click to expand...
Click to collapse
Before installing make backup wipe dalvik cache , cache, do factory reset and try again .. hope it helps
Sent from my Hero using xda premium
Actually I tell the whole story now. When I was making backup of my stock ROM the sd card showed low on space. So I removed that SD card and inserted the one which came with the Phone. On that I installed all the required zip files. Then I made backup of the stock ROM and the data. After that I followed these steps mentioned here -:
http://forum.xda-developers.com/showthread.php?t=1863260
According to the steps I did not did wipe davik cache etc. after instaling the ROM I did wipe factory and data reset and wipe cache partition. After following all the steps mentioned I rebooted my phone as mentioned. But after rebooting the phone is stuck on android logo. I then again went into recovery and tried to wipe dalvik cache the confirmation page that appears before wiping anything is not coming. Also when I tried to restore my phone to the stock ROM an error message is coming. So I am not able to restore to the stock ROM. This is the whole thing. So guys please help. I hope I have not bricked my phone. Any solutions?
Thanks
As long as your phone can go to recovery mode it wasnt bricked..
May i know what recovery that you use to install the rom??
Sent from my GT-S5660 using Tapatalk 2
AiphNday said:
As long as your phone can go to recovery mode it wasnt bricked..
May i know what recovery that you use to install the rom??
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
Mate I used latest version of ClockWork Mod to install the ROM.
pranjaldixit said:
Mate I used latest version of ClockWork Mod to install the ROM.
Click to expand...
Click to collapse
What version it is??
If you are install custom rom from stock rom,its better to use px-cwmV2..
If test it,and it minimize the risk of stuck on android logo..
After that you can change the recovery to other version that you want..
Sent from my GT-S5660 using Tapatalk 2
AiphNday said:
What version it is??
If you are install custom rom from stock rom,its better to use px-cwmV2..
If test it,and it minimize the risk of stuck on android logo..
After that you can change the recovery to other version that you want..
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
I think the version is 5.0.2.7. Also when I am switching off the phone after sometime it is automatically switching on by itself. So for the time being I have removed the battery.
pranjaldixit said:
I think the version is 5.0.2.7. Also when I am switching off the phone after sometime it is automatically switching on by itself. So for the time being I have removed the battery.
Click to expand...
Click to collapse
If you use that version,use the version that can support rfs+ext4 file system..
Stock rom use rfs file system and custom rom usually use ext4 file system,so therefore you have to use recovery that support both..
Sent from my GT-S5660 using Tapatalk 2
AiphNday said:
If you use that version,use the version that can support rfs+ext4 file system..
Stock rom use rfs file system and custom rom usually use ext4 file system,so therefore you have to use recovery that support both..
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
Could you please tell me how to proceed? Because the backup of stock ROM is showing problems.
pranjaldixit said:
Could you please tell me how to proceed? Because the backup of stock ROM is showing problems.
Click to expand...
Click to collapse
I suggest that you flash your phone to stock rom again via odin..
Then change your recovery,i was preffered px-cwmV2,but i dont know is the link still alive or not..
Flash the recovery,reboot..
Then enter recovery mode again,install rom..
Sent from my GT-S5660 using Tapatalk 2
How to do flash stock ROM as the backup that I made is not working properly.
pranjaldixit said:
How to do flash stock ROM as the backup that I made is not working properly.
Click to expand...
Click to collapse
With odin,
Search ! there are allot of guide howto flash gio to stock with odin
Sent from my HTC Hero using xda app-developers app
If you have working recovery it's no use to flash stock ROM, just flash px-cwmV2 http://www.mediafire.com/file/y1xy6g2y5tpp1fg/px-cwm-v2.zip.
Then wipe all, including dalvik, flash desired ROM, wipe all again (including dalvik), and you should be good to go.
phreak_or said:
If you have working recovery it's no use to flash stock ROM, just flash px-cwmV2 http://www.mediafire.com/file/y1xy6g2y5tpp1fg/px-cwm-v2.zip.
Then wipe all, including dalvik, flash desired ROM, wipe all again (including dalvik), and you should be good to go.
Click to expand...
Click to collapse
I hope you must have read my post about the problem. I have clockwork 5.0.2.7. The backup I made is alao showing some error when I tried to restore it using CWM. So please guide how to proceed.
pranjaldixit said:
I hope you must have read my post about the problem. I have clockwork 5.0.2.7. The backup I made is alao showing some error when I tried to restore it using CWM. So please guide how to proceed.
Click to expand...
Click to collapse
I have. As i said, you could just try CWM v2.
BUT to be absolutely safe flash a stock ROM using Odin, see http://forum.xda-developers.com/showpost.php?p=20397915&postcount=3.
After u flash the stock ROM, go to default recovery, factory reset, boot the rom, shutdown.
Flash the desired version of CWM using Odin or trough recovery, and then flash the custom ROM u want.
For me CWM 5.0.2.7 ext4+ RFS couldn't wipe dalvik, nor could it mount /system. So I used cwmV2.
Good luck!
phreak_or said:
I have. As i said, you could just try CWM v2.
BUT to be absolutely safe flash a stock ROM using Odin, see http://forum.xda-developers.com/showpost.php?p=20397915&postcount=3.
After u flash the stock ROM, go to default recovery, factory reset, boot the rom, shutdown.
Flash the desired version of CWM using Odin or trough recovery, and then flash the custom ROM u want.
For me CWM 5.0.2.7 ext4+ RFS couldn't wipe dalvik, nor could it mount /system. So I used cwmV2.
Good luck!
Click to expand...
Click to collapse
Thanks a lot. So first I have to download firmware and then using odin flash it on my phone. After that I have to install clockworkmod v2 amd then install the MIUI ROM? Can the CWM be flashed through recovery?
Thanks
pranjaldixit said:
Thanks a lot. So first I have to download firmware and then using odin flash it on my phone. After that I have to install clockworkmod v2 amd then install the MIUI ROM? Can the CWM be flashed through recovery?
Thanks
Click to expand...
Click to collapse
yes
And please tell me how to install CWM v2 as I already have version 5.0.2.7 of clockwork mod installed in my phone? Pease let me know the procedure for the same.
Thanks
pranjaldixit said:
And please tell me how to install CWM v2 as I already have version 5.0.2.7 of clockwork mod installed in my phone? Pease let me know the procedure for the same.
Thanks
Click to expand...
Click to collapse
when you flash firmware with odin, it will also flash a new recovery.
just enter recovery like normally, and flash cwm-v2.zip
after its done you pull the battery out, and boot into recovery again.
now you have clockworkmod installed
voetbalremco said:
when you flash firmware with odin, it will also flash a new recovery.
just enter recovery like normally, and flash cwm-v2.zip
after its done you pull the battery out, and boot into recovery again.
now you have clockworkmod installed
Click to expand...
Click to collapse
I am not installing firmware right now. I am just wanting to install CWM v2 and try whether it is able to install MIUI successfully or not. If this one also fails then I will install the firmwares via odin. Hope you ate able to understand what I am saying. Please help.
Hi
I have successfully downgraded to 2.3.3 and installed Clock work mod recovery.I want to install the but I have lost the wifi capability as when i try to turn wifi on, it says error.
Secondly,I cannot install superuser from this thread.
http://forum.xda-developers.com/showthread.php?t=1742522
I downloaded the 2nd zip file(SuperSU_V0.93_-efghi-signed_Stable_Update.zip) ,put into sd card,booted into CWM recovery,install zip from sd card,reboot and then the phone stuck at White boot screen with HTC text on it.
I tried restarting but I had to take out battery finally to restart it,and it stuck there again.
. I was having a nandroid backup and I restored boot from there.
Does anyone know what am I doing wrong.Shall I download the first one rar file also then convert it to zip and flsh it with CWM recovery?I want to install this ROM(http://forum.xda-developers.com/showthread.php?t=1830675)
Did you go through revolutionary after downgrading to get S-OFF?
brymaster5000 said:
Did you go through revolutionary after downgrading to get S-OFF?
Click to expand...
Click to collapse
Yes,I have also installed CWM.I can see the seperuser installed but whenever I try to install some application that requires root,the superuser crashes and asks me to Force Close.
I am trying to flash superuser zip but that just gives me bootloops.Same thing happens when I try to flash a ROM zip.Any solutions???
This is the one you need and flash it via recovery
http://download.chainfire.eu/204/SuperSU/CWM-SuperSU-v0.94.zip
sjpritch25 said:
This is the one you need and flash it via recovery
http://download.chainfire.eu/204/SuperSU/CWM-SuperSU-v0.94.zip
Click to expand...
Click to collapse
Thanks.Problem solved.I simply installed from market.It upgraded and root apps are working now.Thanks everyone:victory:
Please help!
After upgrading to twrp 2.6.3.1, then
wiping cache/data/Dalvik, then
format data, then
installing OMNI 4.4 + supersu + gapps....the ROM works fine but i have NO BASEBAND!
HELP!
tdaniels17 said:
Please help!
After upgrading to twrp 2.6.3.1, then
wiping cache/data/Dalvik, then
format data, then
installing OMNI 4.4 + supersu + gapps....the ROM works fine but i have NO BASEBAND!
HELP!
Click to expand...
Click to collapse
I had the identical issue with the CM11 4.4 Rom that willl03 put together. The issue with that one is TWRP.
I'm guessing TWRP is the most recent version available, yes? Have you tried CWM?
InertiaticFlow said:
I had the identical issue with the CM11 4.4 Rom that willl03 put together. The issue with that one is TWRP.
I'm guessing TWRP is the most recent version available, yes? Have you tried CWM?
Click to expand...
Click to collapse
Yes, and Yes.
Flash the latest CWM recovery ...g
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
gregsarg said:
Flash the latest CWM recovery ...g
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Tried with latest cwm already with the same results.
I also formatted complete drive when trying with cwm as well. No baseband still.
tdaniels17 said:
Tried with latest cwm already with the same results.
I also formatted complete drive when trying with cwm as well. No baseband still.
Click to expand...
Click to collapse
Did u flash it from rom manager app? I did it that way. Not the touch version. The classic style. I did that and all is fine
softballjunkee13 said:
Did u flash it from rom manager app? I did it that way. Not the touch version. The classic style. I did that and all is fine
Click to expand...
Click to collapse
Sure did. Still not working
cant update
softballjunkee13 said:
Did u flash it from rom manager app? I did it that way. Not the touch version. The classic style. I did that and all is fine
Click to expand...
Click to collapse
tdaniels17 said:
Sure did. Still not working
Click to expand...
Click to collapse
Happening to me also.
Not able to update to latest 2.6.3.1. it keeps failing. Rom Pro successfully updated to 2.6.3.0.
I downloaded the lastest recovery image from here: http://www.clockworkmod.com/rommanager (because the rom manager app was not installing the latest ewr 6.04.3 for me it kept installing 6.0.4.1 ,
Then uses this app (https://play.google.com/store/apps/d....recoverytools) to install the .img file (open app and choose the recovery you want to install [.img file on your sdcard].
note:
click on "flash other recovery" and find the .img file you downloaded from the link i posted.
I had this happen to me on my Sprint Note 2.
I tried flashing from TWRP and it failed, after updating twrp to 2.6.3.1 it flashed but baseband, imie, network etc was wiped. I restored my previous nandroid, flashed clockwork, then omni and it's working now.. I really do like twrp, plus the Omi OTA updates seem to require it for incremental live updates. But I'm really hesitant to switch back until this is confirmed fixed.
Hi all...I got a problem...
today I updated my phone with s-off and both recovery and firmware to the latest.
When I try flashing the viper 3.1.0 I got Failed...
It seems it's impossible to open zip file. It happens also with other rom. The only one I can install is maximus hd 6.0
Any help?
Thanks
davidebeatrice said:
Hi all...I got a problem...
today I updated my phone with s-off and both recovery and firmware to the latest.
When I try flashing the viper 3.1.0 I got Failed...
It seems it's impossible to open zip file. It happens also with other rom. The only one I can install is maximus hd 6.0
Any help?
Thanks
Click to expand...
Click to collapse
what recovery do you use? CWM or TWRP? I have problems flashing certain roms with certain recoveries, and as far as my experiences go, TWRP works flawlessly with ViperOne
davidebeatrice said:
Hi all...I got a problem...
today I updated my phone with s-off and both recovery and firmware to the latest.
When I try flashing the viper 3.1.0 I got Failed...
It seems it's impossible to open zip file. It happens also with other rom. The only one I can install is maximus hd 6.0
Any help?
Thanks
Click to expand...
Click to collapse
Billchen0014 said:
what recovery do you use? CWM or TWRP? I have problems flashing certain roms with certain recoveries, and as far as my experiences go, TWRP works flawlessly with ViperOne
Click to expand...
Click to collapse
It says it the ViperOne OP to use TWRP, and for good reason. There are issues with CWM, and Philzz is dead with no updates for a while.
I use twrp. ..
Try tom unzip the rom on your PC and if you are unable to unzip means it's a bad download and download the rom again and see how
The error
The zip file is working on PC. ..md5 is correct... I got the same error both with 2.7.0 and 2.8.1 twrp.
No problem with insert coin last rom...Any guess.?
davidebeatrice said:
The zip file is working on PC. ..md5 is correct... I got the same error both with 2.7.0 and 2.8.1 twrp.
Click to expand...
Click to collapse
try formating data.
There is no way to flash supersu on my phone on any rom, on freedomos rom when i select install supersu doesnt work with neither elementalx or stock patched kernel, i tried flashing stock unpatched kernel and then supersu neither that work, it always comes to boot image patcher and then says failure aborting, i had the same problem with other roms, can someone tell me whats the problem ?
Flash modded twrp http://forum.xda-developers.com/devdb/project/dl/?id=21065
Credits to @ eng.stk for this. I had the same issue.
ungeeked said:
Flash modded twrp http://forum.xda-developers.com/devdb/project/dl/?id=21065
Credits to @ eng.stk for this. I had the same issue.
Click to expand...
Click to collapse
Can I use this recovery for every rom in future or I have to go back to official one?
ach3fck said:
Can I use this recovery for every rom in future or I have to go back to official one?
Click to expand...
Click to collapse
No need to go back to official
ungeeked said:
No need to go back to official
Click to expand...
Click to collapse
Ok thanks, sorry to bother you, but should I flash the ROM again via Aroma or I should just flash SuperSu?
Just flash SuperSU. That should do it
Flashed SuperSU and got stuck in a bootloop, did a clean flash again and it worked, thanks a lot!
And now this, f*ck, maybe it could be because I restored backed up data partition, will try to do a clean flash and let you know.
I had this issue yesterday and fixed it today.
try deleting the su binary in twrp.
goto: /data/system/xbin
delete su
flash your SuperSU.zip again.
worked for me, because i had an systemless supersu installed, but an old su file in xbin.