Hi all...I got a problem...
today I updated my phone with s-off and both recovery and firmware to the latest.
When I try flashing the viper 3.1.0 I got Failed...
It seems it's impossible to open zip file. It happens also with other rom. The only one I can install is maximus hd 6.0
Any help?
Thanks
davidebeatrice said:
Hi all...I got a problem...
today I updated my phone with s-off and both recovery and firmware to the latest.
When I try flashing the viper 3.1.0 I got Failed...
It seems it's impossible to open zip file. It happens also with other rom. The only one I can install is maximus hd 6.0
Any help?
Thanks
Click to expand...
Click to collapse
what recovery do you use? CWM or TWRP? I have problems flashing certain roms with certain recoveries, and as far as my experiences go, TWRP works flawlessly with ViperOne
davidebeatrice said:
Hi all...I got a problem...
today I updated my phone with s-off and both recovery and firmware to the latest.
When I try flashing the viper 3.1.0 I got Failed...
It seems it's impossible to open zip file. It happens also with other rom. The only one I can install is maximus hd 6.0
Any help?
Thanks
Click to expand...
Click to collapse
Billchen0014 said:
what recovery do you use? CWM or TWRP? I have problems flashing certain roms with certain recoveries, and as far as my experiences go, TWRP works flawlessly with ViperOne
Click to expand...
Click to collapse
It says it the ViperOne OP to use TWRP, and for good reason. There are issues with CWM, and Philzz is dead with no updates for a while.
I use twrp. ..
Try tom unzip the rom on your PC and if you are unable to unzip means it's a bad download and download the rom again and see how
The error
The zip file is working on PC. ..md5 is correct... I got the same error both with 2.7.0 and 2.8.1 twrp.
No problem with insert coin last rom...Any guess.?
davidebeatrice said:
The zip file is working on PC. ..md5 is correct... I got the same error both with 2.7.0 and 2.8.1 twrp.
Click to expand...
Click to collapse
try formating data.
Related
after 2 weeks of total depression, i succesfull unlocked my bootloader, and installed the cwm Recovery.
and i read a thread about installing custom roms after unlocking bootloader,
i downloaded the latest cyanogenmod for my desire HD and installed it with the "choose zip from sd" option,
i forgot to make a backup ( biggest fail ever), and now , when i try to start the device, it stops on the "Softbank" logo,
(for 1 week, i completely crashed it, and installed the JP softbank android)
i only wanted a custom rom, and thebest irony was, the most videos said me: "Custom rom in 5 minutes",
can anyone please help me?, thanks
Flash the boot.img from the ROM zip using fastboot.
bananagranola said:
Flash the boot.img from the ROM zip using fastboot.
Click to expand...
Click to collapse
which rom.zip?,
Karianos said:
which rom.zip?,
Click to expand...
Click to collapse
The one you tried to install...? Didn't you say you downloaded the latest CM?
i had installed the: "Softbank JP android version" then i tried to install "cm-7.2.0-ace" the latest Cyanogen mod via CWM Recovery , after this the device didn't started
Karianos said:
i had installed the: "Softbank JP android version" then i tried to install "cm-7.2.0-ace" the latest Cyanogen mod via CWM Recovery , after this the device didn't started
Click to expand...
Click to collapse
I don't know the softbank one, but the CM one should be packaged in a zip file. Flash it in recovery (sounds like you already did that) and then move it to your computer, unzip it, and flash the boot.img inside it from fastboot. Clearer directions are linked in the Ace Think Tank thread in DHD General.
Hi,
I can't flash this ROM onto my N5100: [ROM][N5100]Official CM 10.2[JLS36I][11/18/13]
I have twrp 2.6.0 installed and everytime I try to install the zip it says error executing updater binary in zip and it fails.
Also tried this with other recovery, but always getting the same error.
I must be doing something fundamentally wrong, can anyone help me out?
Thanks for any hints.
Try the version of TWRP that I made here or one of civatos CWM recovery.
Cool, thanks, worked like a charm. :good:
nickdollahz said:
Try the version of TWRP that I made here or one of civatos CWM recovery.
Click to expand...
Click to collapse
Another solution
500e said:
Hi,
I can't flash this ROM onto my N5100: [ROM][N5100]Official CM 10.2[JLS36I][11/18/13]
I have twrp 2.6.0 installed and everytime I try to install the zip it says error executing updater binary in zip and it fails.
Also tried this with other recovery, but always getting the same error.
I must be doing something fundamentally wrong, can anyone help me out?
Thanks for any hints.
Click to expand...
Click to collapse
Here is another solution.
Hello to everyone ,
i installed miui v6 to my M8 and after that i cant flash any other rom.
I install a new rom from zip but after the reboot it stucks on the first screen of the new rom.
Waited for 3 hours but nothing.
What do you suggest ?
alexis333 said:
Hello to everyone ,
i installed miui v6 to my M8 and after that i cant flash any other rom.
I install a new rom from zip but after the reboot it stucks on the first screen of the new rom.
Waited for 3 hours but nothing.
What do you suggest ?
Click to expand...
Click to collapse
simple question, do you flashed the boot.img inside the rom using fastboot?(fastboot flash boot boot.img)
Simple answer.
No.
Now what ?
Husky34 said:
simple question, do you flashed the boot.img inside the rom using fastboot?(fastboot flash boot boot.img)
Click to expand...
Click to collapse
This isn't normally required on the M8, unless its some quirk specific to MIUI (which is a ROM I don't a have much knowledge of).
Make sure your TWRP version is up to date.
Make sure your hboot is up to date.
Wipe user data and cache (default wipe in TWRP) before flashing the ROM.
Those are the most common reasons for no boot after flashing multiple ROMs.
I dont use TWRP. I use Philz Touch recovery.
Where can i download latest TWRP ?
alexis333 said:
I dont use TWRP. I use Philz Touch recovery.
Where can i download latest TWRP ?
Click to expand...
Click to collapse
That may be the issue right there. I know some folks are still using it, but Philz hasn't been updated in a long time. And since some newer ROMs have issues with older TWRP builds, I would assume the same would be true with Philz.
You can get TWRP here: https://dl.twrp.me/m8/
alexis333 said:
I dont use TWRP. I use Philz Touch recovery.
Where can i download latest TWRP ?
Click to expand...
Click to collapse
https://twrp.me/devices/htconem8gsm.html
I flashed TPWR and then flashed the new ROM and everything ok.
Thanx for your help men ..
alexis333 said:
Thanx for your help men ..
Click to expand...
Click to collapse
There's a button for that.
Happy it worked for you.
Hey guys im having issues installing custom roms, it dosnt get past installing system files when ever installing any rom but im not sure if its the twrp that im using or what any help please?
Use TWRP official version just released few weeks back.
I found the one from Bluspark the best, haven't had any issues yet
https://forum.xda-developers.com/devdb/project/dl/?id=22806
vjendra said:
Use TWRP official version just released few weeks back.[/QUOT
flashed the current 3.0.3 and 3.0.4 and they both hang on the twrp screen
Click to expand...
Click to collapse
@shadowcreeper_1
Try using bluspark version : https://forum.xda-developers.com/devdb/project/dl/?id=22806
vjendra said:
@shadowcreeper_1
Try using bluspark version : https://forum.xda-developers.com/devdb/project/dl/?id=22806
Click to expand...
Click to collapse
no luck again im trying to flash 2 diffrent roms and it just stays stuck like 25% system installation
shadowcreeper_1 said:
no luck again im trying to flash 2 diffrent roms and it just stays stuck like 25% system installation
Click to expand...
Click to collapse
Instead of installing TWRP, try fastboot to TWRP with the TWRP recovery image file and once there mount system and try Flashing the ROM and see.
Hey guys,
i had CM13 on my phone an i wanted to try a new rom. So i did all the steps like it is written in the thread. After i used the wipe function my phone is always starting in twrp and i cant install a new rom and i also can't update my twrp.
Is my phone now ****ed up or can i do anything to save?
Thx
dg89 said:
Hey guys,
i had CM13 on my phone an i wanted to try a new rom. So i did all the steps like it is written in the thread. After i used the wipe function my phone is always starting in twrp and i cant install a new rom and i also can't update my twrp.
Is my phone now ****ed up or can i do anything to save?
Thx
Click to expand...
Click to collapse
You should be able to boot to bootloader if it's the same problem I have. You can then either flash the stock recovery or this version of TWRP which should fix the problem; https://forum.xda-developers.com/showpost.php?p=70296158&postcount=79
tiklmypikl said:
You should be able to boot to bootloader if it's the same problem I have. You can then either flash the stock recovery or this version of TWRP which should fix the problem; https://forum.xda-developers.com/showpost.php?p=70296158&postcount=79
Click to expand...
Click to collapse
thank you but its not working. i can't install the new version twrp and i also tried to install cm13 again and it is not working
dg89 said:
thank you but its not working. i can't install the new version twrp and i also tried to install cm13 again and it is not working
Click to expand...
Click to collapse
What verison of TWRP are you on?
tiklmypikl said:
What verison of TWRP are you on?
Click to expand...
Click to collapse
right now it is on v2.8.7.0 and i tried to install the new version but it's not working