Hello,
I've been using ViperX 2.7.1 for an year, almost. I want to install the latest ViperX ROM, the JB version but unfortunately the hboot I have is not compatible with the JB versions of ViperX, my phone is slow now because of excess of apps and ****, I wanna reset the phone with a new ROM, how can I upgrade my hboot version to install the latest ROM? Please help.
Bijwa
Bijwa said:
Hello,
I've been using ViperX 2.7.1 for an year, almost. I want to install the latest ViperX ROM, the JB version but unfortunately the hboot I have is not compatible with the JB versions of ViperX, my phone is slow now because of excess of apps and ****, I wanna reset the phone with a new ROM, how can I upgrade my hboot version to install the latest ROM? Please help.
Bijwa
Click to expand...
Click to collapse
post the result from command fastboot getvar all and delete the IMEI and S/N
Thant said:
post the result from command fastboot getvar all and delete the IMEI and S/N
Click to expand...
Click to collapse
I don't understand :S
I'm not an expert or anything, please guide step by step
Bijwa said:
I don't understand :S
I'm not an expert or anything, please guide step by step
Click to expand...
Click to collapse
OK Download this unzip in folder fastboot and enter in the folder pres SHIFT + right mouse button choice Open command window here Shutdown your phone press volume down button + power button to go in bootloader connest the phone to computer you will see on your phone Fastboot USB in the CMD runt the command fastboot getvar all and post the resulte here and delete your IMEI and S/N information.
I hope you are with the windows
Thant said:
OK Download unzip in folder fastboot and enter in the folder pres SHIFT + right mouse button choice Open command window here Shutdown your phone press volume down button + power button to go in bootloader connest the phone to computer you will see on your phone Fastboot USB in the CMD runt the command fastboot getvar all and post the resulte here and delete your IMEI and S/N information.
I hope you are with the windows
Click to expand...
Click to collapse
INFOversion: 0.5a
INFOversion-bootloader: 1.12.000
INFOversion-baseband: 1.1204.105
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 2.17.720.2
INFOserialno: ***********************
INFOimei: ***********************
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: HTC__038
INFObattery-status: good
INFObattery-voltage: 4151mV
INFOdevpower: 100
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
Bijwa said:
INFOversion: 0.5a
INFOversion-bootloader: 1.12.000
INFOversion-baseband: 1.1204.105
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 2.17.720.2
INFOserialno: ***********************
INFOimei: ***********************
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: HTC__038
INFObattery-status: good
INFObattery-voltage: 4151mV
INFOdevpower: 100
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
Click to expand...
Click to collapse
It is better for you to install nandroid backup for 2.17.720.2 and receive the all ota to hboot1.72 or if you can find the firmware from latest ot and flash it manualy
Do you know how to flash manually the firmware?
Thant said:
OK Download unzip in folder fastboot and enter in the folder pres SHIFT + right mouse button choice Open command window here Shutdown your phone press volume down button + power button to go in bootloader connest the phone to computer you will see on your phone Fastboot USB in the CMD runt the command fastboot getvar all and post the resulte here and delete your IMEI and S/N information.
I hope you are with the windows
Click to expand...
Click to collapse
Thant said:
It is better for you to install nandroid backup for 2.17.720.2 and receive the all ota to hboot1.72 or if you can find the firmware from latest ot and flash it manualy
Click to expand...
Click to collapse
I have ClockWorkMod, is it possible to do it with this? Where can I find this nandroid backup? Will I have to unroot my phone again?
If I use an RUU will it work?
Bijwa said:
I have ClockWorkMod, is it possible to do it with this? Where can I find this nandroid backup? Will I have to unroot my phone again?
If I use an RUU will it work?
Click to expand...
Click to collapse
The RUU it will work but you must to find 2.17.720.2 RUU I can find this RUU. If you update manualy the firmaware you must to install again Custom recovery after flash the firmware and it will be to be Philz recovery. After this you can flash the Viper X
This is for advanced USer only if you not feel advanced don't try please
CHARGE YOUR PHONE TO 100%
Download the rom and copy to your SD Card
The firmware.zip you can download from HERE.
1) Make sure you have your Unlock_code.bin file.
Relock your device using fastboot: fastboot oem lock
Enter OEM flash mode using fastboot: fastboot oem rebootRUU
On your phone you will see a black screen with silver HTC written in the middle
Flash firmware: fastboot flash zip firmware.zip must be in your fastboot directory
(You need to do this immediately twice)
When you see a full green bar below, you are done.
3) Manually boot into fastboot on your device. Power off -> Power+ volume down
4) Unlock device: fastboot flash unlocktoken Unlock_code.bin must be in your fastboot directory
5) Flash Philz recovery: fastboot flash recovery recovery.img the recovery.img is inside the arhive you must to place it in your fastboot folder
6) fastboot erase cache
7) Get the boot.img from inside the ROM and flash: fastboot flash boot boot.img take form ROM arhive and place in your fastboot directory
8) Enter recovery and flash ROM
Thant said:
The RUU it will work but you must to find 2.17.720.2 RUU I can find this RUU. If you update manualy the firmaware you must to install again Custom recovery after flash the firmware and it will be to be Philz recovery. After this you can flash the Viper X
This is for advanced USer only if you not feel advanced don't try please
CHARGE YOUR PHONE TO 100%
Download the rom and c
1) Make sure you have your Unlock_code.bin file.
Relock your device using fastboot: fastboot oem lock
Enter OEM flash mode using fastboot: fastboot oem rebootRUU
On your phone you will see a black screen with silver HTC written in the middle
Flash firmware: fastboot flash zip firmware.zip must be in your fastboot directory
(You need to do this immediately twice)
When you see a full green bar below, you are done.
3) Manually boot into fastboot on your device. Power off -> Power+ volume down
4) Unlock device: fastboot flash unlocktoken Unlock_code.bin must be in your fastboot directory
5) Flash Philz recovery[/URL]: fastboot flash recovery recovery.img the recovery.img is inside the arhive you must to place it in your fastboot folder
6) fastboot erase cache
7) Get the boot.img from inside the ROM and flash: fastboot flash boot boot.img take form ROM arhive and place in your fastboot directory
8) Enter recovery and flash ROM
Click to expand...
Click to collapse
Awesome guidance, if I find that RUU, everything goes back to stock? I will be able to download and install OTA updates? My phone becomes like.. a new one again? No need to unroot and everything?
Bijwa said:
Awesome guidance, if I find that RUU, everything goes back to stock? I will be able to download and install OTA updates? My phone becomes like.. a new one again? No need to unroot and everything?
Click to expand...
Click to collapse
yes if you find RUU everything will be stock but you can install nandroid backup with stock recovery and again you can receive the update. Read a little bit more before to start do anything to your phone. I see you are not advanced user and for this reason I write in RED the importhant line. Read more one two days and after this if you feal advanced start with flashing. The best way will be if you find the RUU for 2.17.720.2
Thant said:
yes if you find RUU everything will be stock but you can install nandroid backup with stock recovery and again you can receive the update. Read a little bit more before to start do anything to your phone. I see you are not advanced user and for this reason I write in RED the importhant line. Read more one two days and after this if you feal advanced start with flashing. The best way will be if you find the RUU for 2.17.720.2
Click to expand...
Click to collapse
Thank you so much, I'm already looking for the RUU but I can't find this sad! I will rep you, thanks for help.
Related
I hope that this post is in the correct forum section - apologies if not and apologies if there is already a thread on this subject (I did try searching but nothing that provided a link to a RUU).
Here's what I've done:
Flashed a custom ROM to my UK O2 HTC One X
Then tried to restore it to stock without taking a Clockwork recovery backup (deleted all caches and storage in the process)
Tried to flash with stock RUU found online (1.26.206.2) but RUU software throws an error as the exisiting f/w is 1.29.206.11 and this is what it is expecting
I can access the HOX through fastboot to lock and unlock the device but I cannot see the "SD card" to copy over a custom ROM to at least get some life into the thing (it just sits at the white HTC loading screen until the battery dies).
Ideally I want to return the thing to stock (if anyone has a O2 UK 1.29.206.11 RUU) but failing that is there anyway to get a custom ROM on there (for installation with CWM) without my PC (Windows 7 or Mac available) seeing the HOX storage?
Thanks for reading and any help you can pass on.
brlauk_HOX said:
I hope that this post is in the correct forum section - apologies if not and apologies if there is already a thread on this subject (I did try searching but nothing that provided a link to a RUU).
Here's what I've done:
Flashed a custom ROM to my UK O2 HTC One X
Then tried to restore it to stock without taking a Clockwork recovery backup (deleted all caches and storage in the process)
Tried to flash with stock RUU found online (1.26.206.2) but RUU software throws an error as the exisiting f/w is 1.29.206.11 and this is what it is expecting
I can access the HOX through fastboot to lock and unlock the device but I cannot see the "SD card" to copy over a custom ROM to at least get some life into the thing (it just sits at the white HTC loading screen until the battery dies).
Ideally I want to return the thing to stock (if anyone has a O2 UK 1.29.206.11 RUU) but failing that is there anyway to get a custom ROM on there (for installation with CWM) without my PC (Windows 7 or Mac available) seeing the HOX storage?
Thanks for reading and any help you can pass on.
Click to expand...
Click to collapse
if you can get into to CWM there is an option to mount sd in there somewhere, if you can't get into it maybe try re-flashing it
seanicca said:
if you can get into to CWM there is an option to mount sd in there somewhere, if you can't get into it maybe try re-flashing it
Click to expand...
Click to collapse
Thanks for the reply - I tried that but CWM returns an error when trying to mount the SD card.
Tried flashing 1.26.206.2 through fast boot?
brlauk_HOX said:
Thanks for the reply - I tried that but CWM returns an error when trying to mount the SD card.
Click to expand...
Click to collapse
Cwm 5.8.4.0 allows sd mounting in recovery, try flashing that
sent from my One X using xda venom premium
xmoo said:
Tried flashing 1.26.206.2 through fast boot?
Click to expand...
Click to collapse
DO you mean extracting the 2 img files from the RUU zip and running from fastboot command prompt? If so, the second img file returns a [0000006] error.
brlauk_HOX said:
DO you mean extracting the 2 img files from the RUU zip and running from fastboot command prompt? If so, the second img file returns a [0000006] error.
Click to expand...
Click to collapse
Get the rom.zip and
adb reboot oem-78
fastboot flash zip rom.zip
http://forum.xda-developers.com/showthread.php?p=28665193
Sent from my HTC One X
I'm looking for this Nandroid too but all the links I've found are broken. Can anyone help out? Preferably a CWM backup if at all possible.
brlauk_HOX said:
I hope that this post is in the correct forum section - apologies if not and apologies if there is already a thread on this subject (I did try searching but nothing that provided a link to a RUU).
Here's what I've done:
Flashed a custom ROM to my UK O2 HTC One X
Then tried to restore it to stock without taking a Clockwork recovery backup (deleted all caches and storage in the process)
Tried to flash with stock RUU found online (1.26.206.2) but RUU software throws an error as the exisiting f/w is 1.29.206.11 and this is what it is expecting
I can access the HOX through fastboot to lock and unlock the device but I cannot see the "SD card" to copy over a custom ROM to at least get some life into the thing (it just sits at the white HTC loading screen until the battery dies).
Ideally I want to return the thing to stock (if anyone has a O2 UK 1.29.206.11 RUU) but failing that is there anyway to get a custom ROM on there (for installation with CWM) without my PC (Windows 7 or Mac available) seeing the HOX storage?
Thanks for reading and any help you can pass on.
Click to expand...
Click to collapse
blocka said:
I'm looking for this Nandroid too but all the links I've found are broken. Can anyone help out? Preferably a CWM backup if at all possible.
Click to expand...
Click to collapse
Install directly the RUU 1.26.206.2
Thant said:
Install directly the RUU 1.26.206.2
Click to expand...
Click to collapse
thank you appreciate the link
Thant said:
Install directly the RUU 1.26.206.2
Click to expand...
Click to collapse
BTW my HBOOT version is 0.96, this won't cause any issues will it when it comes to running the RUU?
blocka said:
BTW my HBOOT version is 0.96, this won't cause any issues will it when it comes to running the RUU?
Click to expand...
Click to collapse
Please post the result from command fastboot getvar all and delete IMEI and S/N
Thant said:
Please post the result from command fastboot getvar all and delete IMEI and S/N
Click to expand...
Click to collapse
fastboot getvar all
INFOversion: 0.5a
INFOversion-bootloader: 0.96.0000
INFOversion-baseband: None
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.29.206.11
INFOserialno: xxxxxxxxxxxxx
INFOimei: xxxxxxxxxxxxxxx
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: None
INFObattery-status: good
INFObattery-voltage: 4148mV
INFOdevpower: 100
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
finished. total time: 1.172s
fastboot oem readcid
... INFODEBUG: cid: O2___001
blocka said:
fastboot getvar all
INFOversion: 0.5a
INFOversion-bootloader: 0.96.0000
INFOversion-baseband: None
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.29.206.11
INFOserialno: xxxxxxxxxxxxx
INFOimei: xxxxxxxxxxxxxxx
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: None
INFObattery-status: good
INFObattery-voltage: 4148mV
INFOdevpower: 100
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
finished. total time: 1.172s
fastboot oem readcid
... INFODEBUG: cid: O2___001
Click to expand...
Click to collapse
Ok in this case Download RUU 2.17.206.2 and run the RUU the RUU 1.26.206.2 will not work for you. Lock the bootloader and run the RUU
Thant said:
Ok in this case Download RUU 2.17.207.2 and run the RUU the RUU 1.267.206.2 will not work for you.
Click to expand...
Click to collapse
Cheers! can you explain to a noob why this is the case? BTW the file in the link is only 15MB, is this the correct file size?
blocka said:
Cheers! can you explain to a noob why this is the case? BTW the file in the link is only 15MB, is this the correct file size?
Click to expand...
Click to collapse
Ok this is bad this RUU is not full must be 500-600 Mb= Surch from google to download the RUU 2.17.206.2 for HTC one X and install this in Android RUU files store is not the full. The case is you have 1.29.206.11 witch is newer vrom 1.26.206.2 and if you try to install it you will receive error wrong RUU.
EDIT: I think you will not find this RUU surch here in xda for nandroid backup for 1.29.206.11 and restor it and dont forget to restor the stock recovery too.
Thant said:
Ok this is bad this RUU is not full must be 500-600 Mb= Surch from google to download the RUU 2.17.206.2 for HTC one X and install this in Android RUU files store is not the full. The case is you have 1.29.206.11 witch is newer vrom 1.26.206.2 and if you try to install it you will receive error wrong RUU.
EDIT: I think you will not find this RUU surch here in xda for nandroid backup for 1.29.206.11 and restor it and dont forget to restor the stock recovery too.
Click to expand...
Click to collapse
Thanks for your help, appreciate it!
I've got the RUU you suggested from HERE
Now to apply this RUU all I need to do is run the file (exe) and follow the bouncing ball?
Then once flashed (back to stock), to install a custom recovery (so I can do a nandroid) is unlock the bootloader, install the recovery, and take the nandroid backup. To get the OTA Update(s), I'll need to relock the bootloader, do the automated system updater, redo nandroid, then onto a custom recovery once HBOOT has been updated via the OTA process?
EDIT: Take a nandroid backup first of course
blocka said:
Thanks for your help, appreciate it!
I've got the RUU you suggested from HERE
Now to apply this RUU all I need to do is run the file (exe) and follow the bouncing ball?
Then once flashed (back to stock), to install a custom recovery (so I can do a nandroid) is unlock the bootloader, install the recovery, and take the nandroid backup. To get the OTA Update(s), I'll need to relock the bootloader, do the automated system updater, redo nandroid, then onto a custom recovery once HBOOT has been updated via the OTA process?
EDIT: Take a nandroid backup first of course
Click to expand...
Click to collapse
NO You can't receive the OTA via custom recovery you need ctock recovery and stock rom unrooted
1) Lock your bootloader
2) Run the RUU
3) Apllay all update to 4.x.206.x 4.2.2 JB
4) Unlock your Bootloader
5) Install Philz custom recovery
6) Do a Nandroid Backup on 4.2.2.JB . Save on secure plase it is better to have 2 copies on nandroid on different place
7) If you wont Install custom rom or root the stock it is your decision and don't forget to flash the boot.img if you install custom rom
Thant said:
Ok in this case Download RUU 2.17.207.2 and run the RUU the RUU 1.26.206.2 will not work for you. Lock the bootloader and run the RUU
Click to expand...
Click to collapse
Hi - was just about to go through the process of reverting to stock when I noticed the RUU and link you suggested
Download RUU 2.17.207.2
Click to expand...
Click to collapse
actually is linked to RUU_ENDEAVOR_U_ICS_40_S_O2_UK_2.17.206.2_Radio_2.1204.135.20_release_275038_signed.exe.
So before I start I need to find out exactly what RUU I need, either 2.17.206.2 or 2.17.207.2.
Thanks for ya help .
Hi guys,
Please help !
I've bought a new phone, htc one x, from someone. barely had time to install few apps, and got this OTA update message.
Without thinking twice - i did it. But it seems that the phone was rooted ! and as I understand now - it's a big no-no .
I've tried to figure out from the forum what to do , but - all the answers seems to include fastboot and ADB, which in turn require
the drivers of the phone to be installed. But my phone is dead ! so I can' t do it.
I'm new to roms and all, and I really need your help .
How can I make my phone work again ? I don't care which ROM , custom or stock , just to make it work .
Any help will be appreciated.
Gena
You can access Fastboot? Hold POWER and VOLUMEN - (down)..?
Sent from my HTC One X using Tapatalk 2
big noob said:
You can access Fastboot? Hold POWER and VOLUMEN - (down)..?
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
Hi , yes, I can access the fast boot, but even trying to restore to factory defaults didn't help.
And I can't istall the fastboot on my pc since it needs to connect to a working phone in debug mode (if I understand correctly)
Google Fastboot files
And place them on your pc..for example
On desktop..
C:\Users\Name\Desktop\
and next step go in that directory via CMD typr this
cd C:\Users\Name\Desktop\Fastboot\
And type this
Fastboot getvar cid
Then you will se your CID
go this thread and follow steps to recover your phone
http://forum.xda-developers.com/showthread.php?t=1975140
Sent from my HTC One X using Tapatalk 2
big noob said:
Google Fastboot files
And place them on your pc..for example
On desktop..
C:\Users\Name\Desktop\
and next step go in that directory via CMD typr this
cd C:\Users\Name\Desktop\Fastboot\
And type this
Fastboot getvar cid
Then you will se your CID
go this thread and follow steps to recover your phone
http://forum.xda-developers.com/showthread.php?t=1975140
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
Thank you very much for your help.
I've did the steps as you say, and finally was able to "see" my phone in fastboot from PC.
but the CID I am getting is 11111111 , and there is no backup that matches it.
Can I overwrite it with some kind of rom ? I don't care to loose all the data, just to get a working phone.
Download clockwordmod recovery img file And flash it via Fastboot..
Fastboot flash recovery recoveryname.img
And then download this file:
Link!
And then access in recovery mount storage and copy that .zip file on your phone Clear and wipe everything except battery stats..And then flash that .zip file
genaddiy said:
Thank you very much for your help.
I've did the steps as you say, and finally was able to "see" my phone in fastboot from PC.
but the CID I am getting is 11111111 , and there is no backup that matches it.
Can I overwrite it with some kind of rom ? I don't care to loose all the data, just to get a working phone.
Click to expand...
Click to collapse
You are S-OFF you can install any RUU try with THIS ONE lock the bootloader and run the RUU as Administrator
post result from command fastboot getvar all and delete your S/N and IMEI from the info for any case
---------- Post added at 02:33 PM ---------- Previous post was at 02:32 PM ----------
big noob said:
Download clockwordmod recovery img file And flash it via Fastboot..
Fastboot flash recovery recoveryname.img
And then download this file:
Link!
And then access in recovery mount storage and copy that .zip file on your phone Clear and wipe everything except battery stats..And then flash that .zip file And try to flash it
Click to expand...
Click to collapse
He can't install OTA from recovery and you can't install OTA from recovery!!!!
Hi Thant, thank you for your help.
So you are saying that big noob's method won't work ?
I've downloaded the RUU, but I did not understand what you've meant by : "lock the bootloader" and when should I post the results of "fastboot getvar all" ? after I run the RUU , or before ?
You should post it before RUU..Well i tryed my method before and .zip flashed successfully..
And you can relock it with this command:
fastboot oem lock
Here's what I've got, no what should I do with it ?
>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.12.0000
(bootloader) version-baseband: 2.1204.135.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.17.401.2
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ461****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3821mV
(bootloader) devpower: 47
(bootloader) partition-layout: None
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.830s
You can relock your bootloader download RUU and run it as administrator
I tried to relock , but it said phone is already locked.
Then I ran RUU and got the following error :
ERROR [159] - The ROM update utility cannot update your Android phone. Please get the correct ROM Update Utility and try again .
But what is the correct for me ? and where do I get it ?
genaddiy said:
I tried to relock , but it said phone is already locked.
Then I ran RUU and got the following error :
ERROR [159] - The ROM update utility cannot update your Android phone. Please get the correct ROM Update Utility and try again .
But what is the correct for me ? and where do I get it ?
Click to expand...
Click to collapse
Try this one
And when you in bootloader what is writen up RELOCKED and ENDEAVORU XE or ENDEAVORU PVT
98552432 231
In the bootloader it says :
*** LOCKED *****
ENDEAVORU XE SHIP S-OFF RL
genaddiy said:
In the bootloader it says :
*** LOCKED *****
ENDEAVORU XE SHIP S-OFF RL
Click to expand...
Click to collapse
ENDEAVORU XE have problems with update you must manually update the firmware and after this to install RUU or custom rom.
Download THIS OTA open the zip and extract firmware.zip to your fastboot folder after this do this
Type: fastboot oem rebootRUU and wait for device to reboot you will see HTC logo
Type: fastboot flash zip firmware.zip and wait for process to complete
Sometimes flashing for the first time doesn't work, so flash firmware.zip again just to make sure.
Type: fastboot flash zip firmware.zip and wait for process to complete
Type: fastboot reboot
Unlock your bootloader and flash custom recovery if you are going to use custom ROM.
I want to thank you for your patience with a noob like me
I did everything till the last line.
After flashboot reboot, my phone passed the first htc logo that it was stuck on , but now it's stuck on htc one screen (the one with beats audio logo at the bottom) .
Do I need to do the flash custom rom recovery ?
genaddiy said:
I want to thank you for your patience with a noob like me
I did everything till the last line.
After flashboot reboot, my phone passed the first htc logo that it was stuck on , but now it's stuck on htc one screen (the one with beats audio logo at the bottom) .
Do I need to do the flash custom rom recovery ?
Click to expand...
Click to collapse
yes now flash custom recovery philz 5.15.x mount usb storage copy custom rom to the phone install and flash the boot.img and you will have working rom sense or no sense. Now after flash the firmware what is your hboot version 1.39? If yes you are ready to go
ok , just to make sure I understand before I do it a screw something up :
"yes now flash custom recovery philz 5.15.x mount usb storage copy custom rom to the phone install and flash the boot.img and you will have working rom sense or no sense. Now after flash the firmware what is your hboot version 1.39? If yes you are ready to go"
my hboot version is indeed 1.39
so I d/l philz custom recovery .
no I should :
fastboot flash zip philz_touch_6.07.9-endeavoru.zip
then go to the custom recovery ? (how ? ? ? )
then d/l some custom rom (any recomendations ? just a good stable one, possibly stock)
then copy it to phone using fastboot
and then , from custom recovery flash it ?
I'm sorry for all these questions, but I'm afraid to touch the damn thing already ))))
Flash the recovery (its a img file NOT a zip, take out the img if its in the zip)
Fastboot flash recovery recoveryname.img
Fastboot erase cache
Enter the recovery by selecting FASTBOOT in the bootloader and then RECOVERY (navigate with the volume buttons and confirm with the power button)
Go to the mounts and storage menu and mount the sdcard as a mass storage disk (wait a few minutes until it pops up on the pc)
Copy the rom.zip to the sdcard. Take out the boot.img and flash it via fastboot
Fastboot flash boot boot.img
Fastboot erase cache
Enter recovery again and perform a full wipe
Factory reset
Wipe cache partition
Advanced-wipe dalvik cache
Mounts and storage-format cache, data and system
Install the rom.zip
Done !
Roms....just check the android dev section. Many roms to choose and read up for yourself. It's not that difficult ...maximus and arhd are very close to stock.
Thank you for the detailed reply !
When doing Fastboot flash recovery recoveryname.img I got the messege :
FAILED <remote : not allowed>
Is the problem that my phone is locked ? (written locked at the top of fastboot screen) tried to do fastboot oem unlock but getting "Command error !" .
I saw this solution : http://forum.cyanogenmod.com/topic/74316-a-solution-to-fastboot-flash-recovery-not-allowed-error/ , but I'm not sure it will fit my phone (as it talkes about a different one) and what is a PD98IMG.zip file ?
My goal: Get CM 11 on my One X
What I've done so far: (using simplified filenames)
Unlocked bootloader via HTCdev
adb push cm11.zip /sdcard/
adb push gapp.zip /sdcard/
adb reboot bootloader
fastboot flash recovery clockwork.img
disconnect USB
selected "Recovery" from HBOOT menu.
Result: Stuck on white screen with HTC logo when accessing recovery.
(I can boot into stock ROM and use the phone, but not access custom recovery)
Might or might not be relevant:
I flashed boot.img from CDM11.zip first, that caused the device to hang at normal boot as well.
After quite a lot of googling, I found what I believe is the correct boot.img for my device, as it boots normally now (as long as I don't try to boot recovery)
If I flash (what I believe to be) stock recovery, I get the black screen with a red triangle on it.
Results from fastboot getvar all:
Code:
version: 0.5a
version-bootloader: 1.72.0000
version-baseband: 3.1204.171.33
version-cpld: None
version-microp: None
version-main: 2.18.401.2
serialno: FA2Cxxxxxxxx
imei: 3535670xxxxxx
product: enrc2b_u
platform: HBOOT-T30S
modelid: PM3511000
cidnum: HTC__Y13
battery-status: good
battery-voltage: 4101mV
devpower: 82
partition-layout: None
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: None
hbootpreupdate: 2
gencheckpt: 0
So, I think I've done enough searching to say that not many people have this exact problem.
Care to help me out by nudging me in the right direction?
Flash this recovery
https://www.dropbox.com/s/7zxfzbwewzq6hmq/twrp-recovery2.img
And also do the command after flashing :
Fastboot erase cache
Then try to enter it again.
Mr Hofs said:
Flash this recovery
https://www.dropbox.com/s/7zxfzbwewzq6hmq/twrp-recovery2.img
And also do the command after flashing :
Fastboot erase cache
Then try to enter it again.
Click to expand...
Click to collapse
Same result...
And I'm sorry that I didn't mention it earlier; I have tried a few different versions of CWM and TWRP all without success.
And now that I see the command, I also remember trying that one as well.
But for the record;
Code:
adb reboot bootloader
fastboot flash recovery OneX\twrp-recovery2.img
fastboot erase cache
disconnected USB
selected HBOOT
selected Recovery
Stuck on white screen with green HTC logo.
Rename the recovery name to just recovery.img and try
Fastboot flash recovery recovery.img
Fastboot erase cache
And make sure to use the original HTC usb cable and a 2.0 usb port (directly ....not via any hub or extension chord)
Mr Hofs said:
Rename the recovery name to just recovery.img and try
Fastboot flash recovery recovery.img
Fastboot erase cache
And make sure to use the original HTC usb cable and a 2.0 usb port (directly ....not via any hub or extension chord)
Click to expand...
Click to collapse
Still stuck on white screen with HTC logo when trying to access Recovery.
Ah CRAP !!!!!!! you have the HOX +......STOP flashing stuff from here immediately !!!!
Get the recoveries and roms from the hox+ section asap. That will help you
Mr Hofs said:
Ah CRAP !!!!!!! you have the HOX +......STOP flashing stuff from here immediately !!!!
Get the recoveries and roms from the hox+ section asap. That will help you
Click to expand...
Click to collapse
Holy crap! You're right!
When I look at the "About" section; it's a One X+ !
Good thing I didn't get the recovery in then, because then I'd be flashing ROMS in a minute!
THANKS for noticing!
Yeah just rechecked the posts, i firstly stopped reading at the hboot of 1.72 sorry ....should have seen it faster than this !
Its been a while since flashing roms and I was going to sell my one x but needed stock software and unrooting. But I have ended up with my phone stuck in fast boot with it saying re locked at the top. I think i know where I went wrong but its too late. I dont have any backup because it was ages ago and I have tried various stock roms all returning errors. This is what I was following:
"fastboot oem Lock"
2) "fastboot oem rebootRUU"
3) "fastboot flash zip firmware.zip"
4) "fastboot reboot-bootloader"
5) "fastboot flash "unlocktoken Unlocktoken.bin"
6 "fastboot flash recovery openrecovery-twrp-2.6.3.0-4.18.401.2-endeavoru-JB.img
7) fastboot flash boot ( the boot.img from the custom rom)
8) go in to recovery and install the custom rom.
I got stuck at 6 giving me an error, I presume it was the wrong file.
Do I actually have to do fastboot oem Lock, because its relocked?
Could anybody help me out with what stock roms and file I need please? I know there are a lot of posts but each one is idividual and with different firmware.
Thanks Guys
This is some of my info:
c:\fastboot>fastboot getvar all
INFOversion: 0.5a
INFOversion-bootloader: 1.39.0000
INFOversion-baseband: 5.1204.164.30H
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.14.771.34
INFOserialno: ***********************
INFOimei: ********************
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: H3G__001
INFObattery-status: good
INFObattery-voltage: 3759mV
INFOdevpower: 27
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
Will it unlock if I send a new unlock ticket through htc dev website?
si_d_2003 said:
Its been a while since flashing roms and I was going to sell my one x but needed stock software and unrooting. But I have ended up with my phone stuck in fast boot with it saying re locked at the top. I think i know where I went wrong but its too late. I dont have any backup because it was ages ago and I have tried various stock roms all returning errors. This is what I was following:
"fastboot oem Lock"
2) "fastboot oem rebootRUU"
3) "fastboot flash zip firmware.zip"
4) "fastboot reboot-bootloader"
5) "fastboot flash "unlocktoken Unlocktoken.bin"
6 "fastboot flash recovery openrecovery-twrp-2.6.3.0-4.18.401.2-endeavoru-JB.img
7) fastboot flash boot ( the boot.img from the custom rom)
8) go in to recovery and install the custom rom.
I got stuck at 6 giving me an error, I presume it was the wrong file.
Do I actually have to do fastboot oem Lock, because its relocked?
Could anybody help me out with what stock roms and file I need please? I know there are a lot of posts but each one is idividual and with different firmware.
Thanks Guys
This is some of my info:
c:\fastboot>fastboot getvar all
INFOversion: 0.5a
INFOversion-bootloader: 1.39.0000
INFOversion-baseband: 5.1204.164.30H
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.14.771.34
INFOserialno: ***********************
INFOimei: ********************
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: H3G__001
INFObattery-status: good
INFObattery-voltage: 3759mV
INFOdevpower: 27
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
Will it unlock if I send a new unlock ticket through htc dev website?
Click to expand...
Click to collapse
I've got the same phone as you, i'll upload my H3G_001 backup of Jelly Bean
You will need to use Phillz Recovery or Clockwork Mod Recovery
---------- Post added at 03:23 PM ---------- Previous post was at 02:49 PM ----------
wigankev said:
I've got the same phone as you, i'll upload my H3G_001 backup of Jelly Bean
You will need to use Phillz Recovery or Clockwork Mod Recovery
Click to expand...
Click to collapse
https://dl.dropboxusercontent.com/u/92848413/H3G_001%20JellyBean.zip just unzip it flash Phillz or Clockwork Mod Recovery.
wigankev said:
I've got the same phone as you, i'll upload my H3G_001 backup of Jelly Bean
You will need to use Phillz Recovery or Clockwork Mod Recovery
Click to expand...
Click to collapse
Awesome mate, your a legend!
When you say to use phillz or cmr, can I use these because all I can do is access the fastboot screen? Even if I select recovery in fastboot the htc quietly brilliant screen pops up then goes back to fast boot menu.
si_d_2003 said:
Awesome mate, your a legend!
When you say to use phillz or cmr, can I use these because all I can do is access the fastboot screen? Even if I select recovery in fastboot the htc quietly brilliant screen pops up then goes back to fast boot menu.
Click to expand...
Click to collapse
Go on to HTC Dev and get another unlock token, and proceed to unlock again, then flash CWM or Phillz, then recover your phone with the backup i provided. I have also provided the stock htc recovery in the folder seperately.
wigankev said:
Go on to HTC Dev and get another unlock token, and proceed to unlock again, then flash CWM or Phillz, then recover your phone with the backup i provided. I have also provided the stock htc recovery in the folder seperately.
Click to expand...
Click to collapse
Ok Cheers dude, I will give them a while and let you know. Thanks for the help:good:
wigankev said:
Go on to HTC Dev and get another unlock token, and proceed to unlock again, then flash CWM or Phillz, then recover your phone with the backup i provided. I have also provided the stock htc recovery in the folder seperately.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1604439 i recommend using this to unlock bootloader with the token you received from HTC Dev.
Ok, so got it unlocked again, my viper rom was still installed so the phone boots up. Now to get your jelly bean on correct me if Im wrong, your jellybean zip, shall i unzip it? what shall i do with .img file and the others?
si_d_2003 said:
Ok, so got it unlocked again, my viper rom was still installed so the phone boots up. Now to get your jelly bean on correct me if Im wrong, all i do is put the zip on the phones hd the boot into recovery and then select restore? Just tried it and it says no file found, does your back up go into a specific folder? or just select install from zip?
Click to expand...
Click to collapse
No, on Clockword Mod or Phillz recovery you use Backup and Restore option, you don't flash the zip file, i zipped it up so i could upload to dropbox, just flash the 2013-02-05.20.39.08 folder under restore, there should be a folder called Clockword Mod on your SD Card or something like that.
Sorry for being an idiot im just concerned because I was up till 4.30 this morning trying to sort this out. in cwm folder is one called downloads which goes into recoveries folder, does the folder 2013....go in there? Then by flash do you mean going to fast boot- backup/restore - restore? because it says no file found still.
si_d_2003 said:
Sorry for being an idiot im just concerned because I was up till 4.30 this morning trying to sort this out. in cwm folder is one called downloads which goes into recoveries folder, does the folder 2013....go in there? Then by flash do you mean going to fast boot- backup/restore - restore? because it says no file found still.
Click to expand...
Click to collapse
On your storage you should have a file called clockworkmod and inside that you should have another folder in there called backup, so your 2013-02-05.20.39.08 file should be in that backup folder.
wigankev said:
On your storage you should have a file called clockworkmod and inside that you should have another folder in there called backup, so your 2013-02-05.20.39.08 file should be in that backup folder.
Click to expand...
Click to collapse
Sorry there is no back up folder in there. Ive tried installing phillz over cwm it says complete but after flashing and when i reboot its still cwm. and in rom manager when I try to update cwm it gives me an error.
wigankev said:
On your storage you should have a file called clockworkmod and inside that you should have another folder in there called backup, so your 2013-02-05.20.39.08 file should be in that backup folder.
Click to expand...
Click to collapse
So then go into CWM or Phillz recovery then go to Backup and Restore and restore that 2013-02-05.20.39.08 file, then you should be back on stock H3G rom, then just flash the recovery i put in the folder separately, then you should be fully stock, then relock your Hboot/bootloader then you should be able to update your rom OTA to 4.2.2 and hboot to 1.72
Ok, so finally got there in the end. Hopefully. I have one more question and i will leave you alone.....ive sent the lock message and the bootloader now says relocked again. Is this different from locked? Can i get it to say locked instead of relocked as this looks like its been rooted before?
Thanks
si_d_2003 said:
Ok, so finally got there in the end. Hopefully. I have one more question and i will leave you alone.....ive sent the lock message and the bootloader now says relocked again. Is this different from locked? Can i get it to say locked instead of relocked as this looks like its been rooted before?
Thanks
Click to expand...
Click to collapse
Relocked is correct, did you remember to flash the original htc recovery before relocking?
I did, but.....F### its stuck in bootloader loop now. The bloody phone booted and everything then when I restarted it its now stuck looping.
ok after unlocking the phone boots up fine. Is there something wrong when i go to lock it the it wont boot up?
Cheers dude
si_d_2003 said:
Whats the problem do you think? does that mean I have to:
unroot and install the the files you gave me then lock again. I cant even access recovery in the bootloader
Click to expand...
Click to collapse
are you flash the boot.img from your nand backup via fastboot?
Thant said:
are you flash the boot.img from your nand backup via fastboot?
Click to expand...
Click to collapse
No i didnt do that, I just recovered the nand via cwm, then I flashed recovery.img then locked it. It was stuck in loop then as soon as I unlocked it booted.
si_d_2003 said:
No i didnt do that, I just recovered the nand via cwm, then I flashed recovery.img then locked it. It was stuck in loop then as soon as I unlocked it booted.
Click to expand...
Click to collapse
now take the boot.img from nand backup and flash it via fastboot with the command fastboot flash boot nameofboot.img but you must unlock it again and after this relock it again
Ok cool, that looks like its worked. Thanks for that buddy! Do you know if there is any way to change the ****relocked*** back to ***locked***
My HTC one M8 system UI keeps crashing every time i boot up the phone
How i got to this position
For some reason i was not able to download anything to the phone (yes, there was space available), so i decided to factory reset the phone. unfortunately that was no help. From there i decided to use twrp recovery to wipe everything, Me being a smart guy wiped everything, including the system ( and no i did not make a back up anything ). After got a hold of a mirco sd card and flashed a version of a htc one system file i found at http://forum.xda-developers.com/showthread.php?t=2694994 . I got the phone to boot up ( not booting up from before without a system), but the system UI keeps crashing every time i boot up the phone. Found a thread in xda with the same problem, http://forum.xda-developers.com/showthread.php?t=2694994, and the solution is to get a hold of the stock recovery (not sure if it will work for me). Finally i jump over to an other thead, http://forum.xda-developers.com/showthread.php?t=2701376, saying i need to find out my cidnum. I used fast boot to get it and my version of cidnum is BS_US001 which i could not find on the list.
Long story short
Couldnt download on my phone
wiped my system by mistake (no backs)
flash android revolution hd version of kitkat
system ui keeps crashing
think stock recovery will fix it
getting a random cidnum is BS_US001 and am not sure which stock recovery to flash
Please help !!!!
thank you
Post your fastboot getvar all minus serial no. & imei no.
This will help to find the right ROM for you
ckpv5 said:
Post your fastboot getvar all minus serial no. & imei no.
This will help to find the right ROM for you
Click to expand...
Click to collapse
Please see below.
I found that there is a nandroid back up, on the below thread but how can i flash it. cannot really do anything to the phone.
looking to go stock, if possible
http://forum.xda-developers.com/showthread.php?t=2701376
version: 0.5
version-bootloader: 3.19.0.0000
version-baseband: 1.24.21331147A1.09G
version-cpld: None
version-microp: None
version-main: 4.16.1540.8
version-misc: PVT SHIP S-ON
imei2: Not Support
meid: 00000000000000
product: m8_ul_ca
platform: hTCBmsm8974
modelid: 0P6B12000
cidnum: BS_US001
battery-status: good
battery-voltage: 0mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 3aa067db
hbootpreupdate: 11
gencheckpt: 0
Just run RUU to have everything back to stock.
Download RUU : http://dl3.htc.com/application/RUU_...G_20.68.4196.01_F_release_411207_signed_2.exe
1. put your device in bootloader/fastboot mode and connect to PC
2. relock bootloader - command fastboot oem lock
2. Right click the RUU exe that you downloaded, select "run as administrator" .. wait for it to run, later there is a dialog box, accept, next, next, update, blablabla until it finish and your device rebooted... done.
Note : this will wipe everything on your internal storage. Make a backup of important files before you proceed
ckpv5 said:
Just run RUU to have everything back to stock.
Download RUU : http://dl3.htc.com/application/RUU_...G_20.68.4196.01_F_release_411207_signed_2.exe
1. put your device in bootloader/fastboot mode and connect to PC
2. relock bootloader - command fastboot oem lock
2. Right click the RUU exe that you downloaded, select "run as administrator" .. wait for it to run, later there is a dialog box, accept, next, next, update, blablabla until it finish and your device rebooted... done.
Note : this will wipe everything on your internal storage. Make a backup of important files before you proceed
Click to expand...
Click to collapse
I will give this a try in the morning
I will let you know how it goes, thanks for the help
ckpv5 said:
Just run RUU to have everything back to stock.
Download RUU : http://dl3.htc.com/application/RUU_...G_20.68.4196.01_F_release_411207_signed_2.exe
1. put your device in bootloader/fastboot mode and connect to PC
2. relock bootloader - command fastboot oem lock
2. Right click the RUU exe that you downloaded, select "run as administrator" .. wait for it to run, later there is a dialog box, accept, next, next, update, blablabla until it finish and your device rebooted... done.
Note : this will wipe everything on your internal storage. Make a backup of important files before you proceed
Click to expand...
Click to collapse
I tried running the program twice, but it failed both times.
it couldnt update the system after erasing eveyrthing.
What error ?
If RUU is not an option for you
you also can fastboot flash the RUU in zip format.
Download the RUU_M8_UL_L50_SENSE60_MR_BrightstarUS_WWE_4.16.1540.8_Radio_1.24.21331147A1.09G_20.68.4196.01_F_release_411207_signed_2-decrypted.zip from here : https://www.androidfilehost.com/?fid=95897840722644595
Rename it to RUU.zip
Download the htc_fastboot.exe here : http://forum.xda-developers.com/showthread.php?t=2735235
Put device in bootloader mode, then run command:
fastboot oem rebootRUU
htc_fastboot flash zip RUU.zip[/COLOR]
ckpv5 said:
What error ?
If RUU is not an option for you
you also can fastboot flash the RUU in zip format.
Download the RUU_M8_UL_L50_SENSE60_MR_BrightstarUS_WWE_4.16.1540.8_Radio_1.24.21331147A1.09G_20.68.4196.01_F_release_411207_signed_2-decrypted.zip from here : https://www.androidfilehost.com/?fid=95897840722644595
Rename it to RUU.zip
Download the htc_fastboot.exe here : http://forum.xda-developers.com/showthread.php?t=2735235
Put device in bootloader mode, then run command:
fastboot oem rebootRUU
htc_fastboot flash zip RUU.zip[/COLOR]
Click to expand...
Click to collapse
"what error?" ------ not sure to be honest, it just failed while it was trying to write the system.
Tried your new suggestion and got this error
sending 'zip'... (1494067 KB) OKAY
sending time = 42.386 secs
writing 'zip'... (bootloader) zip header checking...
(bootloader) zip info parsing...
FAIL99 unknown fail
FAILED (remote: 99 unknown fail)
Execution time is 42(s)