hello all.
i just brought a second touch diamond unlocked but i'm having a few problems.
1. does not connect in windows 7 but however does connect to usb mode in bootloader.
now i tried flashing hard-spl onto the device, it goes to as far as the white progress bar, and does nothing.progress bar remains on 0%.
2. i did a hard rest and when the phone finally loaded it was in arabic, makes me wonder if the phone is imported. the s/n does work on the official website.
3. what i would like is help on connecting it to my computer and be able to slash a custom rom it.
please can sombebody please help me out of this pickle pls.
Try downgrading the radio to one below 1.02.xxxxx before flashing the HARDSpl
Also download Windows Mobile Device Centre from MS to get active sync running on the PC
ive done it
thanks all ive it,you guys are great.
thanks for all the advise.
I am using 64 bit windows 8 and cannot unlock my bootloader after trying many times and failing. Firstly the phone does not stay in fastboot mode for more than 5 seconds. Secondly I get error on installing drivers. I have key, pcc, seus and flashtool but still cant unlock it!
I am exasperated, Please help
u need to search first before asking
here's the guide:
http://forum.xda-developers.com/showthread.php?t=2095087
[QUOTE=m1st3r1;40953232]u need to search first before asking
here's the guide:
http://forum.xda-developers.com/showthread.php?t=2095087[/QUOTE]
Oh trust ne I searched a lot
Wrll while I was waiting for a reply, I thought of installing drivers once again and there I found that the drivers were unsigned, so I was gonna force unsigned drivers anyway by a guide.
I made this thread because at that time I didnt know that, I tried on xp but there was no cmd by shift+ right click, and on win 7, the 5 sec problem persisted and my phone was like dead and I had to try three button combo to revive it.
Anyways rightnow a download is going on, will ask solutions as and when problem appear
Thanks
On a sidenote hate microsoft for windows 8 hassles and sony for delaying jb further
Hi all,
heres my first post on xda and I just wanna to explain my problem.
I am in possession of a GT-N7105, just bought the USB connection worked perfectly but when I tried to install the CF-ROOT and CWM RECOVERY me no more, the PC recognized the phone.
I state that I had installed windows 8.
First of all I installed Samsung KIES and did not recognize him. I uninstalled Kies and installed the drivers using the NOTE 2 TOOLKIT. Even so, nothing to do. The computer can not find the driver for QUALCOMM CDMA TECHNOLOGIES MSM.
I thought it was an error of Windows 8, maybe a bug, so I formatted the system by installing Windows 7 Professional, downloaded NOTE 2 TOOLKIT and installed the drivers without having the phone connected to the PC. When the TOOLKIT required me to connect to the pc NOTE2, I did. But even here, unfortunately, can not find drivers for QUALCOMM CDMA TECHNOLOGIES MSM.
P.S. The phone in DOWNLOAD MODE is recognized by ODIN and I got it back to the SERVICE FIRMWARE but even so the problem is not resolved.
I also tried to change the usb port but nothing.
I tried to install other versions of firmware via odin but nothing. I do not know what to do. Google can not give me a solution and not XDA.
So I decided to write here publicly to expose my problem. I hope someone of you can help me solve this problem that prevents me from installing the CM10.1!
In advance thank you all.
usamasabir said:
Hi all,
heres my first post on xda and I just wanna to explain my problem.
I am in possession of a GT-N7105, just bought the USB connection worked perfectly but when I tried to install the CF-ROOT and CWM RECOVERY me no more, the PC recognized the phone.
I state that I had installed windows 8.
First of all I installed Samsung KIES and did not recognize him. I uninstalled Kies and installed the drivers using the NOTE 2 TOOLKIT. Even so, nothing to do. The computer can not find the driver for QUALCOMM CDMA TECHNOLOGIES MSM.
I thought it was an error of Windows 8, maybe a bug, so I formatted the system by installing Windows 7 Professional, downloaded NOTE 2 TOOLKIT and installed the drivers without having the phone connected to the PC. When the TOOLKIT required me to connect to the pc NOTE2, I did. But even here, unfortunately, can not find drivers for QUALCOMM CDMA TECHNOLOGIES MSM.
P.S. The phone in DOWNLOAD MODE is recognized by ODIN and I got it back to the SERVICE FIRMWARE but even so the problem is not resolved.
I also tried to change the usb port but nothing.
I tried to install other versions of firmware via odin but nothing. I do not know what to do. Google can not give me a solution and not XDA.
So I decided to write here publicly to expose my problem. I hope someone of you can help me solve this problem that prevents me from installing the CM10.1!
In advance thank you all.
Click to expand...
Click to collapse
Try and enable the USB debugging mode and check once .
I have the same pb My N7105 with Qualcomm CDMA...
hello
i have the same pb , Win 7 64 dont find qualcomm cdma technologies msm driver
where find it for WIN 7 X64?
thx by advance.
I have windows 8 as well and couldn't get my computer to recognize it no matter how much I updated the drivers and such. But I ended up going into control panel and clicking on devices and hardware or whatever it's called. Go to the note 2 icon (not sure exactly what it will be called but something like Samsung device), right click and hot troubleshoot. This actually solved the problem for me and hopefully helps you.
Sent from my SCH-I605 using xda app-developers app
Guys try this,
On your PC >Control Panel->Administrative Tools->Services
Start "Windows Installer" service
connect your device with USB
Kiss your girl, drink a beer, make a little jig and hit my thank button lol
Make sure that there is no other conflicting drivers installed if u hv delete those uninstall samsung drivers restart pc. Install samsung latest drivers restart connect the cable to phn thn to pc it will start installing drivers just cancel the updates and you r good to go it will detect fine
Hi guys
This is my first thread here, so I hope that it is in right place.
Yesterday I received my elephone p8000 but I noticed a problem which I tried to resolved by myself. When I tried to switch on the phone, there was only a dark screen with booting sound. Recovery mode doesn't work so I thought that sp flash tool help when I use format and root phone and go in some way to recovery mode. I put on memory of phone a supersu, a then I format my phone by sp flash tool. I want to upgrade it by sp flash tool but I can't because I have got some problems with usb drivers, I see some errors during processing upgrade.
I have read the topic bbs.elephone hk viewthread&tid=6616&page=5&authorid=12774#.VfDLzZfLJ6I ( I can't post a full link here as a new guy ) and I had a hope that when I install these drivers it will help me, but it doesn't work.
Probably I made a mistake because I don't know too much about android enviroment, but I have the feeling that I'm close to repair my phone by myself, I would like to try some mtk 6753 usb drivers and MediaTek PreLoader USB VCOM (Android) but I can't find any on windows 7. Is there anybody who could help me? I'm sorry for my english, I tried to explain everything as good as I can.
Regards.
androidxda dot com/download-elephone-usb-drivers
Hi,
so you basically flashed your phone even though you knew that your USB driver is unstable? Don't do that!
Does your phone still boot (in any mode)?
Check if you can at least get into the bootloader. Hold volume up and power at the same time. If you can't, you probably screwed your device. Oh, and fix your Windows setup! The driver needs to be stable in order to flash the phone again!
Same problem!
you have to instal the package you have download with the tool.
i tried it on my laptop and i had all errors with the drivers. i tried my desktop (win 10 ) and it worked very wel.
i hoop i helped you!:good:
use PDAnet driver!!! And use spflash-tool to reinstall the stock rom!
Hello folks, I'm developer for embedded and I see that many persons have a problem with the driver QHSUSB_BULK.
This is a RAW driver in the Lumia phones differently the reason to occur the Android phones, in android phones is indicate a usually problem in partitions, but the bootloader is intact, in windows mobile, this index indicate a series of extreme problems in the ROM and bootloader, but if the driver can be installed with the windows device recovery tool, its ok, your phone can be repared using the thor2 option in the WDRT, but if the phone dont recognized and the driver can't be installed, the driver stay QHSUSB_BULK, the phone is dead, just using JTAG to recovery the ROM and the bootloader together, bcz in windows phone the partitions are different that the present in android, in android the partitions are in stuff like a computer and the bootloader controls the boot (like a BIOS n POST in PC), but in windows mobile the bootloader is incremented in ROM, how the windows 8.1 boot in PC, it is an auto control inside the system.
Well guys, its a explanation why someone can recovery the phone and another cannot to do.
My lumia is full-bricked too, bcz the windows 10 was upgraded yesteday, just remember folks, who are using the W10M disable the auto-upgrade, its is brick a lot of lumias. The upgrade can be doing, but first give a rollback in cellphone using the WDRT.
Best regards friends.
rogjr8086 said:
Hello folks, I'm developer for embedded and I see that many persons have a problem with the driver QHSUSB_BULK.
This is a RAW driver in the Lumia phones differently the reason to occur the Android phones, in android phones is indicate a usually problem in partitions, but the bootloader is intact, in windows mobile, this index indicate a series of extreme problems in the ROM and bootloader, but if the driver can be installed with the windows device recovery tool, its ok, your phone can be repared using the thor2 option in the WDRT, but if the phone dont recognized and the driver can't be installed, the driver stay QHSUSB_BULK, the phone is dead, just using JTAG to recovery the ROM and the bootloader together, bcz in windows phone the partitions are different that the present in android, in android the partitions are in stuff like a computer and the bootloader controls the boot (like a BIOS n POST in PC), but in windows mobile the bootloader is incremented in ROM, how the windows 8.1 boot in PC, it is an auto control inside the system.
Well guys, its a explanation why someone can recovery the phone and another cannot to do.
My lumia is full-bricked too, bcz the windows 10 was upgraded yesteday, just remember folks, who are using the W10M disable the auto-upgrade, its is brick a lot of lumias. The upgrade can be doing, but first give a rollback in cellphone using the WDRT.
Best regards friends.
Click to expand...
Click to collapse
rogjr8086,
I have the exact same problem on my Lumia 640 LTE RM-1073. I have tried everything and nothing has worked. I have spent countless hours and days. I finally decided to call Microsoft and get warranty service, and what a pain even that was. First to get a hold of the right person/phone number was a royal pain, but finally got someone on the phone for Windows Phone support: (888)665-4228 and (800)246-6542. Turns out there is a 1 year warranty on all Windows phones. So they had me go to https://www.microsoft.com/en-us/mobile/support/warranty-checkers/. Only problem was when I would enter my IMEI number it said it was out of warranty, yet I bought it from the Microsoft store. So while on the phone the agent took my info, sent me an email and I had to take screen shots of my order email from November of last year and email the screen shots back to him. I now have to wait 2-4 days to get a result from the warranty dispute and supposedly a shipping label. If it was out of warranty, it would be about $45 to get repaired from what another agent had said. Either way, hope some of this info helps someone else as it truly was a pain to just get a hold of someone at MS. I would love to fix the phone in the meantime, but I just cannot get it to boot not matter what I try.
Thanks,
Jim
rogjr8086 said:
Hello folks, I'm developer for embedded and I see that many persons have a problem with the driver QHSUSB_BULK.
This is a RAW driver in the Lumia phones differently the reason to occur the Android phones, in android phones is indicate a usually problem in partitions, but the bootloader is intact, in windows mobile, this index indicate a series of extreme problems in the ROM and bootloader, but if the driver can be installed with the windows device recovery tool, its ok, your phone can be repared using the thor2 option in the WDRT, but if the phone dont recognized and the driver can't be installed, the driver stay QHSUSB_BULK, the phone is dead, just using JTAG to recovery the ROM and the bootloader together, bcz in windows phone the partitions are different that the present in android, in android the partitions are in stuff like a computer and the bootloader controls the boot (like a BIOS n POST in PC), but in windows mobile the bootloader is incremented in ROM, how the windows 8.1 boot in PC, it is an auto control inside the system.
Well guys, its a explanation why someone can recovery the phone and another cannot to do.
My lumia is full-bricked too, bcz the windows 10 was upgraded yesteday, just remember folks, who are using the W10M disable the auto-upgrade, its is brick a lot of lumias. The upgrade can be doing, but first give a rollback in cellphone using the WDRT.
Best regards friends.
Click to expand...
Click to collapse
Drivers should be perfectly installed, otherwise phone can't detect ,it will leads to brick phone ,when some thing goes wrong & driver not detect the device,thankfully dell drivers for usb 3.1 for 950/xl working perfectly, when other drivers not working,uninstall all usb drivers /portable device ,install dell drivers works perfectly .dell drivers usb 3.1 Link
vecdid said:
rogjr8086,
I have the exact same problem on my Lumia 640 LTE RM-1073. I have tried everything and nothing has worked. I have spent countless hours and days. I finally decided to call Microsoft and get warranty service, and what a pain even that was. First to get a hold of the right person/phone number was a royal pain, but finally got someone on the phone for Windows Phone support: (888)665-4228 and (800)246-6542. Turns out there is a 1 year warranty on all Windows phones. So they had me go to https://www.microsoft.com/en-us/mobile/support/warranty-checkers/. Only problem was when I would enter my IMEI number it said it was out of warranty, yet I bought it from the Microsoft store. So while on the phone the agent took my info, sent me an email and I had to take screen shots of my order email from November of last year and email the screen shots back to him. I now have to wait 2-4 days to get a result from the warranty dispute and supposedly a shipping label. If it was out of warranty, it would be about $45 to get repaired from what another agent had said. Either way, hope some of this info helps someone else as it truly was a pain to just get a hold of someone at MS. I would love to fix the phone in the meantime, but I just cannot get it to boot not matter what I try.
Thanks,
Jim
Click to expand...
Click to collapse
do you realize that phone is worth around that 45$ unlocked on ebay in almost new condition? heck I just bought a 830 unlocked for a friend at 60$ and it came with an almost invisible scratch on a corner
Guys..i quick question before i give up on my lumia 640 RM-1077. The device is completely dead and when connected to PC it reads as QHSUSB_BULK. Is there any which way to recover the device? I understand from your discussion here that there is no hope when a Lumia encounters that message.. but just wanted to confirm it before giving up on bringing it back to life.
lumia 640 RM-1075 QHSUSB_BULK
I have the same problem with my lumia 640 RM-1075.