Related
hi
i hard bricked my lg 930
how ?
i followed this step
http://www.androidauthority.com/lg-nitro-hd-clockworkmod-cwm-recovery-48447/
(do not follow)
i tried install ClockworkMod (CWM) since i installed the koereean rom and (no wi-fi to install tru rom manager)
is anything i can do for my phone like i'm not able to go in download mode, i can't see anything on screen. black
while i connect the usb cable i can hear a sound like connecting to computer
thanks a lot
We would need some more information to know if your phone is truly bricked.
does your device show up via ADB?
does it show up with B2CAppSetup program?
have you followed the unbricking solution?
http://forum.xda-developers.com/showthread.php?t=1597488
an important part of getting the phone into download mode is unplugging the usb at the right time during a hard reboot with the volume up held.
hope any of this helps but hopefully we will hear back with more info.
Maverick.Marq said:
We would need some more information to know if your phone is truly bricked.
does your device show up via ADB?
does it show up with B2CAppSetup program?
have you followed the unbricking solution?
http://forum.xda-developers.com/showthread.php?t=1597488
an important part of getting the phone into download mode is unplugging the usb at the right time during a hard reboot with the volume up held.
hope any of this helps but hopefully we will hear back with more info.
Click to expand...
Click to collapse
first of all thanks for response
no, it doesn't show up in adb (use command adb devices)
i can hear only the sound from computer (exactly like you connect true usb cable) but nothing on screen
yes, i tried the steps but ask to connect the phone, no usb connecting
@Maverick.Marq,
No, we don't really need more info to know his phone is hosed. Basically he has flashed a supposed CWM image on top of one of the bootloader partitions instead of the recovery partition. Everyone should contact these guys and tell them their guide is horribly, horribly wrong. They never responded to my email...but maybe if more people contact them about it, they'll remove their stupid guide.
Sent from my LG-P930 using Tapatalk 2
Malnilion said:
@Maverick.Marq,
No, we don't really need more info to know his phone is hosed. Basically he has flashed a supposed CWM image on top of one of the bootloader partitions instead of the recovery partition. Everyone should contact these guys and tell them their guide is horribly, horribly wrong. They never responded to my email...but maybe if more people contact them about it, they'll remove their stupid guide.
Sent from my LG-P930 using Tapatalk 2
Click to expand...
Click to collapse
thanks
anything i can do for my phone?
some update
some update
i have 2 computers
to the first one i never installed phone drivers other then lg drivers
1- in device manager with the phone conected (without or with battery) it's show "QHSUSB_DLOAD" with exclamation , see attachment
error 2 device manager lg p930 nitro.jpg
error device manager driver lg p930.jpg
2 - in USBVIEW20.exe when i open (phone still conected) i have this error (see attachment "error in usb view.jpg" and "usb view qualcomn.jpg")
some udate 2
in second computer i had many phone drivers like sony xperia play, htc evo 3d or htc desire
it's show zeus flash device with exclamation and now QHSUSB_DLOAD like the other computer - see " error desktop device manager zeus flash device"
i made 2 posts because i can't upload more then 4 images
i think to force to take driver for QHSUSB_DLOAD but how can i do that because i tried with propietes, update driver and don't want to take " android_winusb.inf" from lg drivers
i found in adb/adroid-sdk/extras/google a file android_winusb.inf and i have 3 choises (of course, i try to force to take the drivers,)
sorry for my english
if is some developer i can give access to my computer by remote
any ideas
thanks
update
i tried to burn the recovery image with nero and i have a error size
maybe this was the problem, the recovery image was incomplete?
nickmatine said:
i tried to burn the recovery image with nero and i have a error size
maybe this was the problem, the recovery image was incomplete?
Click to expand...
Click to collapse
LOL, I have no idea why you're trying to use Nero, but yes you are correct -- recovery images should be 16MB (16777216 bytes).
That's not the issue though. The issue is that you flashed something to the mmcblk0p6 partition, which is bad.
drumist said:
LOL, I have no idea why you're trying to use Nero, but yes you are correct -- recovery images should be 16MB (16777216 bytes).
That's not the issue though. The issue is that you flashed something to the mmcblk0p6 partition, which is bad.
Click to expand...
Click to collapse
i used nero just to see if is some error
mmcblk0p6 partition it's the bootloader partition?
Hi
Hi Nickmatine,
Could you please confirm if your phone (LG P930) got unbricked?
Regards
@allians2002,
Unless he sent it in to be hardware-flashed, it's probably pretty much hosed.
I think I have the same problem
http://forum.xda-developers.com/showthread.php?t=1569514
There is nothing you can do. I will sell mine, or if someone need a new screen or something, just so damn unlucky...
allians2002 said:
Hi Nickmatine,
Could you please confirm if your phone (LG P930) got unbricked?
Regards
Click to expand...
Click to collapse
not yet, but not abandoned the project
i think know where to solder wires to hard flash but it's a very small connector. Maybe 7-8 hours just to solder the wires. If someone know where can i buy the cable for this connector i can help you and other people
nickmatine said:
not yet, but not abandoned the project
i think know where to solder wires to hard flash but it's a very small connector. Maybe 7-8 hours just to solder the wires. If someone know where can i buy the cable for this connector i can help you and other people
Click to expand...
Click to collapse
i also have exactly the same problem. after unbricking . and coming to korean firmware i tried putting at&t firmware images and in the last step. it gave me an error "less in memory " for system.img.
the battery was at 2% when i did that. since then the screen wont light up.
i am trying to see if i can charge the battery with an external charger and then put back to phone and try if it boots.. i am pretty sad about it ..
i'll buy a jtag box next week and i'll let you know
or maybe someone know without jtag like this for optimus p930
http://forum.xda-developers.com/showthread.php?p=25501047
nickmatine said:
i'll buy a jtag box next week and i'll let you know
or maybe someone know without jtag like this for optimus p930
http://forum.xda-developers.com/showthread.php?p=25501047
Click to expand...
Click to collapse
i have given my phone for repair to nearby mobile repair shop. i have a very little hope from them .. which means its bricked
hem.acharya said:
i have given my phone for repair to nearby mobile repair shop. i have a very little hope from them .. which means its bricked
Click to expand...
Click to collapse
please tell as what happened
I'll let you next week after buy medusa box
finally, i bought the medusa box but i messed up my motherboard. Why?
In the schematic diagram for Jtag they give me the wrong pins (in mirror). Beacuse i tried many times with wrong configuration my motherboard died. After that i removed the JTAG conector and i so the wrong schematic
now,i still try to fix a lg p 930 so if anybody have a hard bricked phone for sell send a messege
Sorry for my english
SOLVED
greeting
After 6 months I'm back with feedback. I was Able to fix my LG P930 with Medusa box. Meanwhile I bought a professional microscope, Octopus Box, Z3X box and Riff box, so now i fix phones by JTAG. I managed to fix my P930 so is alive again after 6 months
Hello dear readers and great XDA members,
Last summer I unlocked the bootloader of my Xperia Play R800i with the testpoint method. Everything worked fine: I installed CWM and loaded a FreeXperia version of CyanogenMod 9.1.
A couple of days ago, I wanted to finally update my ROM to a newer version since there had been so many releases since last summer. I loaded the new ROM and everything worked fine. However, some of the problems I hoped would've been solved by the update, weren't solved at all, especially the video capturing and panorama pictures. So I decided it maybe would be better to flash a new kernel.
I searched for a kernel, but couldn't find anything I liked. Then, I can't remember where, someone posted the "boot.img" files included in the FreeXperia CM9 ROM zip packages were kernel releases. So I decided to use flashtool and flash the boot.img as a new kernel.
This obviously didn't work and I tried some others. By the way: I couldn't boot into ClockWorkMod anymore since I tried to flash a new kernel. Only fastboot and flashmode would work.
I couldn't remember which kernel I used last summer, so I wandered the internet and eventually found that an X10 kernel was included in Flashtool. I though I remembered something about X10 from last summer, so I decided to stupidly flash that kernel to my Xperia Play.
After this flash completed, my phone doesn't respond to anything anymore. Following a list of things I tried (everytime after I tried something, I removed the USB cable and the battery to make sure the Xperia Play was turned off):
- When I press and hold the power button, nothing happens, not even the small vibrate always felt when the phone starts.
- Getting into fastboot mode doesn't work anymore (I tried with holding the search button and connecting USB, as well as some other buttons, nothing worked.)
- Getting into flashmode doesn't work either.
- No matter what I do, the phone won't give me a sign it's still alive. (no LED, no vibrate, no screen, nothing.)
- I tried the Sony Update Service, but that obviously doesn't recognize the phone
- Flashtool doesn't recognize the phone either.
- ADB doesn't recognize the phone of course.
- s1tool (the tool I used for the TestPoint bootloader unlock) recognizes I plug something in, but then gives an error it can't get access to it.
- I charged the battery overnight and tried all of the above again... still nothing works...
- When I plug in the phone to the PC, my PC recognizes something plugged in, but with the name QHSUSB_DLOAD in Device Manager.
(by the way: I am using Windows 8 Pro x64)
Is this phone completely dead or is there any way it can be saved? I was planning on keeping this phone at least until the end of 2013 or begin of 2014 before upgrading... An immediate upgrade is not in my budget and for now I have returned to my Nokia 5530 on Symbian, but that's nothing compared to Android :'(
Thank you very much in advance... I really hope someone can save my poor phone. I know I have been stupid, but I think I somehow panicked when I couldn't get the phone back into CWM and stupidly flashed the X10... Stupid stupid me.
Well I always update to the latest working kernel when I flash a new rom. The one working currently for me is fxp152 kernel.
Have you tried with battery, holding the search button, plug it in, then hold the Power button while still holding search.
Contact Alejandrissimo, he can probably help you.
Sent from R800at
eksasol said:
Well I always update to the latest working kernel when I flash a new rom. The one working currently for me is fxp152 kernel.
Have you tried with battery, holding the search button, plug it in, then hold the Power button while still holding search.
Contact Alejandrissimo, he can probably help you.
Sent from R800at
Click to expand...
Click to collapse
Thank you for the response! Where do you find these kernels? Are those boot.img files included with fxp zip files the kernel images?
I hadn't tried to hold the power button after holding search button + plugging it in, but it doesn't work either
I will probably contact Alejandrissimo in a couple of days if I can't solve it myself or if nobody else can help me solve it...
Thank you!
same boat
ThirtyOne34 said:
Thank you for the response! Where do you find these kernels? Are those boot.img files included with fxp zip files the kernel images?
I hadn't tried to hold the power button after holding search button + plugging it in, but it doesn't work either
I will probably contact Alejandrissimo in a couple of days if I can't solve it myself or if nobody else can help me solve it...
Thank you!
Click to expand...
Click to collapse
Hi, i have the exact same problem. Is there anything that can be done ... phone is totally dead, and everything is the exact same as you mentioned..
thanks
Tommy
try this it works
tommyforest123 said:
Hi, i have the exact same problem. Is there anything that can be done ... phone is totally dead, and everything is the exact same as you mentioned..
thanks
Tommy
Click to expand...
Click to collapse
Pull the battery out put it in close the cover plug usb then hold power button and flashtool from androxide should detect it.
Qshusb error
Hi,
Can anyone help. Basically my phone is hard bricked. No logo, no flashmode or fastboot recovery. Totally dead. When i connect to pc - I get QSHUSB DLOAD error, the pc wont recognise my phone. I have tried flashtools but, I cant enter into flashmode ( holding down back while connecting usb...I know how to fix it if i can get my phone back into a softbrick.( getting the sony logo - being able to enter flashmode )..anybody have any ideas please. I have searched online for days with no answer. Xperia play 1 week old running 2.3.4. - i tried to install ics 4.0.4 gamer rom but pressed the flash x10 rom in flashtools by mistake ...
Rmontoya83 said:
Pull the battery out put it in close the cover plug usb then hold power button and flashtool from androxide should detect it.
Click to expand...
Click to collapse
You clearly have no idea what you are talking about. i have read you say this over and over again and yet it doesn't work. you need to press back not power.
tommyforest123 said:
Hi, i have the exact same problem. Is there anything that can be done ... phone is totally dead, and everything is the exact same as you mentioned..
thanks
Tommy
Click to expand...
Click to collapse
tommyforest123 said:
Hi,
Can anyone help. Basically my phone is hard bricked. No logo, no flashmode or fastboot recovery. Totally dead. When i connect to pc - I get QSHUSB DLOAD error, the pc wont recognise my phone. I have tried flashtools but, I cant enter into flashmode ( holding down back while connecting usb...I know how to fix it if i can get my phone back into a softbrick.( getting the sony logo - being able to enter flashmode )..anybody have any ideas please. I have searched online for days with no answer. Xperia play 1 week old running 2.3.4. - i tried to install ics 4.0.4 gamer rom but pressed the flash x10 rom in flashtools by mistake ...
Click to expand...
Click to collapse
Hi Tommy,
I am very sorry for my late response. I haven't fixed my phone yet, but I fear only a hardware flash would work... I think I am going to try to get my phone back to the store where I bought it and I hope they'll fix it. If they don't, I will try to find someone who can hardware flash or ask Allejandrissimo (an Xperia bricked devices expert, it seems...)
I hope you will get your phone to work again! (And please let me know how you did it if you succeed). I will keep you updated if there is any progress. I am very busy at the moment though, so I don't know when I can get my phone back to the store. In the meantime, I have also bought a used Galaxy Nexus...
Greetings,
Sven
EDIT: I think I also accidentally flashed the X10 rom or kernel in the flashtool...
Could be easily fixed by flashtool, tried the same (flashing x10) and phone looked dead. The I toke the battery out and placed it back. Then I could enter flashmode and flash a stock ftf.
Sent from my LT22i using xda app-developers app
nickholtus said:
Could be easily fixed by flashtool, tried the same (flashing x10) and phone looked dead. The I toke the battery out and placed it back. Then I could enter flashmode and flash a stock ftf.
Sent from my LT22i using xda app-developers app
Click to expand...
Click to collapse
Well, the problem is we can't enter flashmode or fastboot... Really no life to it...
But thanks for the input!
hi guys, ive rooted n unlock boot loader for my friend xperia PLAY with android 2.3.3 stok, after 2days he update his phone to 2.3.4..... now his phone did not reboot.. i can not set the phone to fastboot, only flashboot... then i try to falsh ftf.. when i try to reboot, only vibrate but no screen boot n green LED on the start button...can anybody help??.. sorry for my english..
ThirtyOne34 said:
Hello dear readers and great XDA members,
Last summer I unlocked the bootloader of my Xperia Play R800i with the testpoint method. Everything worked fine: I installed CWM and loaded a FreeXperia version of CyanogenMod 9.1.
A couple of days ago, I wanted to finally update my ROM to a newer version since there had been so many releases since last summer. I loaded the new ROM and everything worked fine. However, some of the problems I hoped would've been solved by the update, weren't solved at all, especially the video capturing and panorama pictures. So I decided it maybe would be better to flash a new kernel.
I searched for a kernel, but couldn't find anything I liked. Then, I can't remember where, someone posted the "boot.img" files included in the FreeXperia CM9 ROM zip packages were kernel releases. So I decided to use flashtool and flash the boot.img as a new kernel.
This obviously didn't work and I tried some others. By the way: I couldn't boot into ClockWorkMod anymore since I tried to flash a new kernel. Only fastboot and flashmode would work.
I couldn't remember which kernel I used last summer, so I wandered the internet and eventually found that an X10 kernel was included in Flashtool. I though I remembered something about X10 from last summer, so I decided to stupidly flash that kernel to my Xperia Play.
After this flash completed, my phone doesn't respond to anything anymore. Following a list of things I tried (everytime after I tried something, I removed the USB cable and the battery to make sure the Xperia Play was turned off):
- When I press and hold the power button, nothing happens, not even the small vibrate always felt when the phone starts.
- Getting into fastboot mode doesn't work anymore (I tried with holding the search button and connecting USB, as well as some other buttons, nothing worked.)
- Getting into flashmode doesn't work either.
- No matter what I do, the phone won't give me a sign it's still alive. (no LED, no vibrate, no screen, nothing.)
- I tried the Sony Update Service, but that obviously doesn't recognize the phone
- Flashtool doesn't recognize the phone either.
- ADB doesn't recognize the phone of course.
- s1tool (the tool I used for the TestPoint bootloader unlock) recognizes I plug something in, but then gives an error it can't get access to it.
- I charged the battery overnight and tried all of the above again... still nothing works...
- When I plug in the phone to the PC, my PC recognizes something plugged in, but with the name QHSUSB_DLOAD in Device Manager.
(by the way: I am using Windows 8 Pro x64)
Is this phone completely dead or is there any way it can be saved? I was planning on keeping this phone at least until the end of 2013 or begin of 2014 before upgrading... An immediate upgrade is not in my budget and for now I have returned to my Nokia 5530 on Symbian, but that's nothing compared to Android :'(
Thank you very much in advance... I really hope someone can save my poor phone. I know I have been stupid, but I think I somehow panicked when I couldn't get the phone back into CWM and stupidly flashed the X10... Stupid stupid me.
Click to expand...
Click to collapse
Maybe you still have a chance! Bcoz I think you have completely damaged ta files+ semcboot which can only be repaired by se toolbox 3 which requires credits(money)( I m assuming it'll detect phone bcoz s1 tool recognized it with error ) if you have it than you can repair it or you can contact alejandressimo on gtalk.
Sent from my R800i using xda premium
creative_md said:
Maybe you still have a chance! Bcoz I think you have completely damaged ta files+ semcboot which can only be repaired by se toolbox 3 which requires credits(money)( I m assuming it'll detect phone bcoz s1 tool recognized it with error ) if you have it than you can repair it or you can contact alejandressimo on gtalk.
Sent from my R800i using xda premium
Click to expand...
Click to collapse
Really?! I really hope it'll work. I have a Galaxy Nexus now, but I desperately need a Gingerbread for testing my apps again...
Thank you!
Finally some one who has fixed a bricked phone
nickholtus said:
Could be easily fixed by flashtool, tried the same (flashing x10) and phone looked dead. The I toke the battery out and placed it back. Then I could enter flashmode and flash a stock ftf.
Sent from my LT22i using xda app-developers app
Click to expand...
Click to collapse
When you phone was dead after you put the battery in did you hold the power button then it went in to fast boot instead of holding thback button CORRECT? ²
---------- Post added at 05:19 PM ---------- Previous post was at 05:08 PM ----------
ThirtyOne34;38604501 01 said:
Really?! I really hope it'll work. I have a Galaxy Nexus now, but I desperately need a Gingerbread for testing my apps again...
Thank you![/QUOTE
Message me in myinbox and I will give you # so I can walk you through it. I have bricked my phone many time and a lot of people will tell you I'm wrong. But I'm right all I ask is that you reply to this tread and post that I know how to fix bricked phones.
Click to expand...
Click to collapse
Hello I have the same your problem, are you by any chance managed to solve it? I have sent you to the sony center and have called irreparable ._. If it is true that Alejandro can fix it I wonder what may be the relevant industry professionals sony
Arbiterandrea said:
Hello I have the same your problem, are you by any chance managed to solve it? I have sent you to the sony center and have called irreparable ._. If it is true that Alejandro can fix it I wonder what may be the relevant industry professionals sony
Click to expand...
Click to collapse
Hello Arbiterandrea,
I am very sorry tot report that I wasn't able to fix my Xperia Play. I sent my phone back to the online store I bought it from and it arrived there 1 day before my guarantee expired. When I got my phone back, it was a brand new one with a different serial number, no screen protector, not a scratch. And it was for free thanks to my guarantee, even though I bricked it myself. (I just told them "it suddenly stopped working")
If you've got any guarantee left, you could try that, but if I understand correctly you already tried that... Then I think you should contact Allejandrissimo, I've heard many good things about him. I didn't contact him myself, though.
Good luck! And let me know if you have fixed it?
Greetings
ThirtyOne34
I received an SGH-T989 that wouldn't boot. It had TWRP on it, so I was able to flash latest stable CWM. Upon reboot, it apparently became hard-bricked.
Currently, I'm unable to enter download or recovery modes. USB Jig does not work. There is no output on the screen, even when charging the battery. When connected in Windows (32 or 64), I get a usb error message: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)"
My question: Is the motherboard dead, or could a jtag repair fix it?
What I've tried:
multiple micro usb cables
usb jig
odin
keis
heimdall
Thanks xda!
Dostoevsky said:
I received an SGH-T989 that wouldn't boot. It had TWRP on it, so I was able to flash latest stable CWM. Upon reboot, it apparently became hard-bricked.
Currently, I'm unable to enter download or recovery modes. USB Jig does not work. There is no output on the screen, even when charging the battery. When connected in Windows (32 or 64), I get a usb error message: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)"
My question: Is the motherboard dead, or could a jtag repair fix it?
What I've tried:
multiple micro usb cables
usb jig
odin
keis
heimdall
Thanks xda!
Click to expand...
Click to collapse
so the qhsusb_dload does not apear when your device is plugged into the computer? if so please hold on a little longer, somebody found a method of unhard bricking S3's and eventually Note 3's and the galaxy megas and im getting closer to being able to do this aswell im going to try to fix mine when i get home so hold on
Trozzul said:
so the qhsusb_dload does not apear when your device is plugged into the computer? if so please hold on a little longer, somebody found a method of unhard bricking S3's and eventually Note 3's and the galaxy megas and im getting closer to being able to do this aswell im going to try to fix mine when i get home so hold on
Click to expand...
Click to collapse
That would be great! I did see the S3 fix that loads a debrick.img from sdcard - would that work with hardbricked? Windows wouldn't load the usb drive for my phone, complaining that the firmware didn't give the "required resources". So if the firmware is borked, I'm not sure it would be able to load an external img.
I couldn't wait, though. Sent it out for jtag repair :fingers-crossed:
Dostoevsky said:
That would be great! I did see the S3 fix that loads a debrick.img from sdcard - would that work with hardbricked? Windows wouldn't load the usb drive for my phone, complaining that the firmware didn't give the "required resources". So if the firmware is borked, I'm not sure it would be able to load an external img.
I couldn't wait, though. Sent it out for jtag repair :fingers-crossed:
Click to expand...
Click to collapse
Hello I was wondering if the Jtag did its job?
sirsmokey said:
Hello I was wondering if the Jtag did its job?
Click to expand...
Click to collapse
Jtag should always do the job, unless there was physical damage done to the motherboard.
Dostoevsky said:
That would be great! I did see the S3 fix that loads a debrick.img from sdcard - would that work with hardbricked? Windows wouldn't load the usb drive for my phone, complaining that the firmware didn't give the "required resources". So if the firmware is borked, I'm not sure it would be able to load an external img.
I couldn't wait, though. Sent it out for jtag repair :fingers-crossed:
Click to expand...
Click to collapse
Trozzul said:
Jtag should always do the job, unless there was physical damage done to the motherboard.
Click to expand...
Click to collapse
Thanks for the quick reply , i guess the next question i should ask , is it really worth the 100 bux for the j tag service or to put the money towards a newer phone ?,hmmm rhetorical i guess
sirsmokey said:
Thanks for the quick reply , i guess the next question i should ask , is it really worth the 100 bux for the j tag service or to put the money towards a newer phone ?,hmmm rhetorical i guess
Click to expand...
Click to collapse
The t989 has great specs, only downside is its PPI (really low) if you still love it, I would wait if you want to send it into JTAG repairs, we are on the verge of unbricking our t989 without JTAG! Looks like we need someone with a working t989D though
I have been studying the other 'unbrick' methods, its definatly mind expanding, the amount of knowledge absorbed can seriously make you forget time n space.
If there is anything I can do / contribute holler at me.
Now ill tell you something weird so I flashed a rom not meant for T989D plus I did it all without being rooted. (if it matters) since Since the flash the phone doesn't boot into recovery or show a bootanimation, just darkness.Yet it felt operational in hand.
Once I plugged it back into the PC all I got was a constant notification of drivers that cannot be identified Also it keeps connecting and disconnecting the device.
None of this is weird until I installed OMAP flash and the T.I. drivers for which was used to fix my friends nexus. After he left I plugged my s2 to the PC still nothing. I looked away for a brief moment . Then i noticed MobileGo for Android popped on screen. Visually showing my s2 as an Alcatel rom.
just bizzare.....
The unbrick method on the S2 is a little different, but in General, at http://forum.xda-developers.com/showthread.php?t=2646310 after a little work, I resurrected a QHSUSB_DLOAD 9025 T989D to the point of ODIN and fully working Android OS working, just missing recovery.. Soon to follow in a day or so.
Lord Zog said:
The unbrick method on the S2 is a little different, but in General, at http://forum.xda-developers.com/showthread.php?t=2646310 after a little work, I resurrected a QHSUSB_DLOAD 9025 T989D to the point of ODIN and fully working Android OS working, just missing recovery.. Soon to follow in a day or so.
Click to expand...
Click to collapse
:goodude I could kiss you, thank you so much!!!! that is exactly where my phone was (QHSUSB_DLOAD):good:
Thanks to the devs behind the unbrick , all of your hard work is deeply appreciated, One Luv :laugh:
Now my 989 is working again, ive had it stuck for the past half year. Life saver you are sir
sirsmokey said:
:goodude I could kiss you, thank you so much!!!! that is exactly where my phone was (QHSUSB_DLOAD):good:
Thanks to the devs behind the unbrick , all of your hard work is deeply appreciated, One Luv :laugh:
Now my 989 is working again, ive had it stuck for the past half year. Life saver you are sir
Click to expand...
Click to collapse
glad to hear its working again! might i ask how you went about this?
sirsmokey said:
:goodude I could kiss you, thank you so much!!!! that is exactly where my phone was (QHSUSB_DLOAD):good:
Thanks to the devs behind the unbrick , all of your hard work is deeply appreciated, One Luv :laugh:
Now my 989 is working again, ive had it stuck for the past half year. Life saver you are sir
Click to expand...
Click to collapse
Lord Zog said:
The unbrick method on the S2 is a little different, but in General, at http://forum.xda-developers.com/showthread.php?t=2646310 after a little work, I resurrected a QHSUSB_DLOAD 9025 T989D to the point of ODIN and fully working Android OS working, just missing recovery.. Soon to follow in a day or so.
Click to expand...
Click to collapse
Hi, so I also have a hard bricked t989 galaxy s2 (tmobile variant) and I'm attempting to understand the instructions. However my phone has another issue...usb connection to the computer does not work, it hasn't worked since the micro usb port on the phone was replaced because the old one broke. So really the phone could charge but never connect to my pc as it cant be detected...so what are my options? If i create the sd card with the image, will i still need to connect it to a pc in order to force the phone into download mode? Please help...
hello people today have inadvertently p880 flashed a kernel of 4x HD on my Optimus G E975. (I had had it for my wife on my phone saved)
Unfortunately, since then nothing works.
I no longer get the recovery I'm no longer in the fastboot and not even in the download mode.
Only when I connect the phone to the PC, the status lamp lights red briefly
The phone will be visible to a Windows XP PC as QHSUSB_Dload unknown device.
I Have found a Link on XDA but this is in chinese.
Does not come with the instructions further unfortunately.
Has anyone had experience with it?
Can I save the phone yet? Urgently need your help.
Sorry for my Bad Englisch.
Did you only flashed a kernel? Can you still get to the bootloader to flash kdz? If not you probably have an hard brick translate this page with google translate
http://bbs.gfan.com/android-6269182-1-1.html
It has an way what could work.
Do you still have guarantee to return the phone to lg? Cause it might get fixed i dont want to let broke parts or what to get new one i think that is wrong but this is fixable you justneed the knowledge and the tools.
Verstuurd vanaf mijn Nexus 4 met Tapatalk
Hard Bricked E975 totally
babo84 said:
hello people today have inadvertently p880 flashed a kernel of 4x HD on my Optimus G E975. (I had had it for my wife on my phone saved)
Unfortunately, since then nothing works.
I no longer get the recovery I'm no longer in the fastboot and not even in the download mode.
Only when I connect the phone to the PC, the status lamp lights red briefly
The phone will be visible to a Windows XP PC as QHSUSB_Dload unknown device.
I Have found a Link on XDA but this is in chinese.
Does not come with the instructions further unfortunately.
Has anyone had experience with it?
Can I save the phone yet? Urgently need your help.
Sorry for my Bad Englisch.
Click to expand...
Click to collapse
I got same case of yours, please help us xdas :crying:
babo84 said:
hello people today have inadvertently p880 flashed a kernel of 4x HD on my Optimus G E975. (I had had it for my wife on my phone saved)
Unfortunately, since then nothing works.
I no longer get the recovery I'm no longer in the fastboot and not even in the download mode.
Only when I connect the phone to the PC, the status lamp lights red briefly
The phone will be visible to a Windows XP PC as QHSUSB_Dload unknown device.
I Have found a Link on XDA but this is in chinese.
Does not come with the instructions further unfortunately.
Has anyone had experience with it?
Can I save the phone yet? Urgently need your help.
Sorry for my Bad Englisch.
Click to expand...
Click to collapse
i'm in the same situation -.-
i think we can't do nothing by ourself only cervice centre can help us...
igli83 said:
i'm in the same situation -.-
i think we can't do nothing by ourself only cervice centre can help us...
Click to expand...
Click to collapse
Yeah, need to bring mine to where i bought it. Have you tried to search alternative way same as Jtag service?
systembuilder said:
Yeah, need to bring mine to where i bought it. Have you tried to search alternative way same as Jtag service?
Click to expand...
Click to collapse
jtag riff is the way ... but i don't own it ...
now i just have to try to find a cetner that use this way to repair smartphones. surfing on the net i realized that is the only way that can save us.
http://hi.baidu.com/ch_ff/item/c5baa02910fbbe110975082c
only way its jtag repair ;/
Dear all. I have a note II that has gone wild. The phone was working fine but then I received a note 4 and put the note 2 aside. Then I was trying to install root and was able to do so by installing TWRP V2.8.3 and everything went smooth and the phone was rooted. I then used the phone for a while but switched to the note 4 after. Now, 5 months after, I wanted to check something on my olde note II. I charged the phone and switched it on but it was stuck on the Galaxy note II screen I rebooted then rebooted but still the same. I went in the TWRP recovery to try to do something but I was not able to because it says that it cant mount storage, cant mount efs, cant mount data, cant mount cache and cant mount system.
Then I have decided to install the firmware image from zipped file but that did not work as it sees that the internal and external storags are 0 and cant mount them.
Then I opted to try and install the firmware PDA through Odin but that also did not work as Odin was not able to detect the phone. Now I'm clueless and not sure what to do the only thing I'm able to do is boot in TWRP recovery and that is all. Can any one help.
My phone had the latest official rom from samsung the 4.4.2
Please help
classic, just search. there is a thread with tutorial how to get your n2 back to life. you could also have sds, but try different odin and flash with pit
Ok now I'm in a worse situation. I have managed to get to the download mode and connected it to ODIN and tried to flash with the stock rom but at the end of the writing process it failed and started to get a message on the phone to connect my device to kies and try again. I tried that but did not do anything. Then I tried Odin again but this time I unticked the auto reboot. then clicked start. The same thing happened as before and writing failed now though my phone is blank it does not show anything and it does not want to turn on and no LED that is turning on nor the charging icon. I searched the net and someone suggested that the battery is damaged. I replaced the battery but still no go. Please I really need to get that phone back alive. I think I bricked it. any ideas or directions to help me with this annoying case. I cant even boot to recovery nor download please help
No one can help
sambosat said:
No one can help
Click to expand...
Click to collapse
Odin dont detect Phone in Download mode, right?
So test another USB hub or an other or Official Samsung USB connector.. When nothing work try another PC and Flash the Firmware in PDA.
Christopher11 said:
Odin dont detect Phone in Download mode, right?
So test another USB hub or an other or Official Samsung USB connector.. When nothing work try another PC and Flash the Firmware in PDA.
Click to expand...
Click to collapse
Finally someone gave me an advise. Thank you Chris. The problem is the phone is blank and cant go to download mode. It looks like that I have bricked it and not sure how to get back
sambosat said:
No one can help
Click to expand...
Click to collapse
sambosat said:
Finally someone gave me an advise. Thank you Chris. The problem is the phone is blank and cant go to download mode. It looks like that I have bricked it and not sure how to get back
Click to expand...
Click to collapse
Can you make a Video what exactly happens when you :Remove battery and Restart phone, Restart phone into Download Mode and/or Recovery? Thx :good:
Christopher11 said:
Odin dont detect Phone in Download mode, right?
So test another USB hub or an other or Official Samsung USB connector.. When nothing work try another PC and Flash the Firmware in PDA.
Click to expand...
Click to collapse
Christopher11 said:
Can you make a Video what exactly happens when you :Remove battery and Restart phone, Restart phone into Download Mode and/or Recovery? Thx :good:
Click to expand...
Click to collapse
As I said when I remove the battery and insert it back the phone remains blank no response to any button pressed.
What I did is that my phone was stuck on opening screen samsung screen. Then someone suggested to flash it with the stock rom. So I went to Sammobile site and downloaded the latest firmware. I tried to install it to my phone using ODIN and just before the end. ODIN failed. I tried it the second time and the same happened. then the third time I read that I have to untick auto reboot. I did and tried ODIN for the 3rd time and on the third trial I got the same fail message and then I wanted to boot into download mode for the forth time but this time the phone went dead and not responding to any button press. I hope that this explains the situation
Hmmm.. That Sounds really tricky.. Never saw a Device before thats so bricked.. When really nothing worked from this Forum may you let an expert give a look on your Phone, i know some official Samsung shops, maybe they can help.. Sry that i cant hell you like you want it and sry for my Bad English.. Good Luck with your Note 2
Christopher11 said:
Hmmm.. That Sounds really tricky.. Never saw a Device before thats so bricked.. When really nothing worked from this Forum may you let an expert give a look on your Phone, i know some official Samsung shops, maybe they can help.. Sry that i cant hell you like you want it and sry for my Bad English.. Good Luck with your Note 2
Click to expand...
Click to collapse
No worries bro. At least you are trying. I have never seen this before either and I'm stumped and where I'm I dont think I can find any samsung pro shop. All what they are going to say is the motherboard is dead and you need to change it. I do have another phone but I hate it when a devise does this to me