Stuck in bootloader, cant access recovery after cyanogen 10 snapshot update - Sprint Samsung Galaxy S III

I just accepted the cyanogen 10 snapshot update today for my d2spr; after the update finished it left me stuck in a bootloop, and Im unable to access recovery! I want to go back to the rom I was at before the update, which was the cm-10.1.3. Please help!!

Download mode and flash a custom recovery tar

CNexus said:
Download mode and flash a custom recovery tar
Click to expand...
Click to collapse
Thanks for the reply, I just downloaded a stock rom from samsung, and flashed via odin. It was successful, however even with the stock rom, I am still stuck in a boot load, and it still wont let me into recovery mode....

Solved!!
So I finally solved the issue. After I had flashed the stock rom via odin, I needed to find away to wipe cache's and do a factory reset. I finally accomplished this by downloading the .pit file, and re-flashing it together with the stock rom all through odin. After doing so, I was finally able to get into recovery, wipe, and do a factory reset. For anyone else having this issue, here is a link where I found the .pit file, and a thread with some basic instructions:
:laugh:
PIT Files: http://d2tehp.chickenkiller.com:22222/pits/
Basic Instructions: http://teamuscellular.com/Forum/topic/3882-pit-files-for-all-us-variants-of-sgsiii/

Related

[Q] Won't boot rom or cwm recovery - only download mode

Hi! I have encountered a problem, and really hope someone can help me!
Two days ago i flashed Omnirom Nightly on my n7105 to get Android 4.4. I was running cmw recovery but couldnt get the ota updates to work, so i was trying to flash open recovery instead. I used an apk that was supposed to install a script.
When i rebootet my phone, all i could get was the Note 2 boot image. It wont boot into recovery mode, or the rom. I am however able to boot into download mode.
Custom Binary download: Yes (4 counts).
Current binary: Custom
System Status: Custom.
How should i proceed? I've already tried to reflash cwm recovery, which did work, but didnt solve the problem. I am currently downloading stock firmware, but the file is 1.2 GB so it will take i while. Figured i should ask here in the meanwhile.
I'm not an expert at Android at all, im just a guy enjoying having custom roms and playing around a little. I do know that there are a lot of very talented people in this forum, and i really hope someone can help me find a solution. I've been googling for hours, but cant find anything that seems to work for me / or i dont fully understand and wont risk try before someone approves it.
Thank you, Vetle
EDIT: Is it correct that i cant flash any custom rom trough Odin? Or could i just flash omnirom again trough Odin?
If i manage to flash the stock rom and the bootloop goes away, will everything go back to normal, so i can flash cmw again and then a custom rom again?
No custom rom can be flashed through odin, as most of them are zip cwm/twrp base.
When u can only go to download mode, an official firmware only can help u through odin.
Sent from SM-N9005 with xda-app
Thanks for the answer!
Yup, i have flashed a stock rom now and i got the stock recovery. Everything was working fine.
Then i proceeded to do a factory reset in the stock recovery and flashed cwm trough Odin. When it was done, it wouldnt let me into recovery again! I can still boot up the phone tough.
I've also tried Open recovery. CWM via Rom manager. Open Recovery trough Goo Manager... Still cant get recovery to work, the stock rom works tough.
Any ideas?
Okay, i tried to flash the stock rom again and installed Rom Manger.
It still showes TWRP and CWM under installed recovery and i guess these its these two who makes the problem.
My plan now is to figure out how to completely remove them. I've never done anything related to adb before, so i hope it possible to remove them in another way?
This is so weird. Somehow i managed to install CWM Touch via Rom Manager and it booted. When i choose reboot /pull battery it will only boot straight into CWM again. I tried to flash TWRP via Odin, wich sucseeds, but then it reboots into CWM again!
I am soo lost its almost funny!
EDIT: Since i could get into cwm now, i tried to flash omnirom, but it aborts and all i get is status 7...?
EDIT2: Latest now is that i suddenly managed to install TWRP via Odin, but i still cant install the latest omnirom, all it says is "updating partition details".
vetle666 said:
This is so weird. Somehow i managed to install CWM Touch via Rom Manager and it booted. When i choose reboot /pull battery it will only boot straight into CWM again. I tried to flash TWRP via Odin, wich sucseeds, but then it reboots into CWM again!
I am soo lost its almost funny!
EDIT: Since i could get into cwm now, i tried to flash omnirom, but it aborts and all i get is status 7...?
EDIT2: Latest now is that i suddenly managed to install TWRP via Odin, but i still cant install the latest omnirom, all it says is "updating partition details".
Click to expand...
Click to collapse
I had recovery problems in the last few days also.
Installed DN3 rom using philz recovery, because its capable of prepare the phone to a new rom in a easy way.
It all went fine until first reboot.
I had a recovery boot loop. All I could see were some buttons and then reboot again.
Like you I had download access and flashed philz with Odin, but no luck.
Installed twrp via Odin and all was fine, and flashed philz new version.
Then I had to flash a new kernel (to be able to access wifi) and it all started again. Now I'm back on twrp.
Let's see what happens on my next flash.
My suggestion is to flash the recovery, and if that's OK flash the rom and use it
Next time you need recovery get Odin to help, but not all the way from an original rom. Just the custom recovery.
But if you want to get rid of your strange recovery configuration, and you are not already on new 4.3 recovery(which in your case could explain some of the problems you had) , with knox, install an older original rom, 4.1, and make all the steps, root it, install a custom recovery, and from there the room you want.
Reading your path sorting this problem, that was what would do next
Best regards

HELP.Bricked tab3 8 SM-T310?

Please help because I messed up my tab3 8.
I was using the BinDroid ROM and today I decided to flash this ROM [JB/KK][4.3.1/4.4.2] CyanogenMod unofficial builds.
I started flashing the Philz recovery via Odin. After that I have bootloop.
I tried to flash stock firmware via Odin and still have bootloop.
Is there any way to fix this?
I am able to enter recovery or download mode.
spirosoupia said:
Please help because I messed up my tab3 8.
I was using the BinDroid ROM and today I decided to flash this ROM [JB/KK][4.3.1/4.4.2] CyanogenMod unofficial builds.
I started flashing the Philz recovery via Odin. After that I have bootloop.
I tried to flash stock firmware via Odin and still have bootloop.
Is there any way to fix this?
I am able to enter recovery or download mode.
Click to expand...
Click to collapse
1.Do you boot into the Philz recovery or the one you had previous to Odin the recovery? If its philz try wiping data and cache and rebooting.
2.Next check if the md5 of your download matches and you have downloaded the correct zip for your device (lt01wifi). If so factory data reset and then flash again.
3.Make sure you are using ODIN correctly. A good guide can be found here http://forums.androidcentral.com/ambassador-guides-tips-how-tos/300296-guide-samsung-how-flash-stock-rom-via-odin.html
I flashed the stock firmware again and still bootloop.
Then I did a factory reset via the recovery and that was it!!!! My tablet is fixed!!!
I pass the Philz recovery then and root the tablet.
So now I am with the stock ROM and rooted. Thank you!!!
Is your data lost after flashed ?
Image, mp3, video etc..

[Q] already installed stock firmware, can't install stock kernels or recovery

I tried to unroot my phone after getting stuck in a cyanogen bootloop a while back. I managed to get into recovery and install stock firmware via Odin. I did not however install the stock kernel or stock recovery. I am now in a stock t-mobile bootloop. I'm not sure what to do, I have been unable to get into recovery thus far, but I can keep trying. What can I do?
lasabrjotur said:
I tried to unroot my phone after getting stuck in a cyanogen bootloop a while back. I managed to get into recovery and install stock firmware via Odin. I did not however install the stock kernel or stock recovery. I am now in a stock t-mobile bootloop. I'm not sure what to do, I have been unable to get into recovery thus far, but I can keep trying. What can I do?
Click to expand...
Click to collapse
Can you get in Download mode? To work with Odin you must be in Download mode, not recovery.
If you can get in Download mode, then start Odin and flash a TWRP Odin flashable recovery:
http://teamw.in/project/twrp2/101
Then at least you should have a functional recovery. From there you could either try to flash your stock ROM again, or any another ROM.
Are you 100% sure what you flashed was a good stock ROM for the T989 ?
Dont you have a nandroid you could restore?

[Q] Android 4.3 update via odin fail

Hello everyone,
I decided today to try and switch from aokp android 4.4.2 rom back to the official 4.3 update. I Factory reset and cleared cache, and then flashed the .tar file via odin, and it said it passed. Unfortunately, it gets to the flashing Samsung logo, and gets stuck there.. any suggestions on how to fix this?
deanfranks21 said:
Hello everyone,
I decided today to try and switch from aokp android 4.4.2 rom back to the official 4.3 update. I Factory reset and cleared cache, and then flashed the .tar file via odin, and it said it passed. Unfortunately, it gets to the flashing Samsung logo, and gets stuck there.. any suggestions on how to fix this?
Click to expand...
Click to collapse
What phone model and carrier do you use and where did you find an Odin flashable file for 4.3 JB? Do you have custom recovery installed on your phone?
Larry2999 said:
What phone model and carrier do you use and where did you find an Odin flashable file for 4.3 JB? Do you have custom recovery installed on your phone?
Click to expand...
Click to collapse
I have a bell SGH-I747M, I got the zip off of sam mobile, and I did, until I flashed the rom through Odin and it removed root and cwm
deanfranks21 said:
I have a bell SGH-I747M, I got the zip off of sam mobile, and I did, until I flashed the rom through Odin and it removed root and cwm
Click to expand...
Click to collapse
The 4.3 ROM would have been better flashed as a zip file via custom recovery than Odin. I would suggest you first try booting into recovery mode and doing a hard wipe/reset. If this does not work, then you may try reinstalling the zip. Boot into download mode and flash custom recovery (cwm or TWRP) via Odin. Also copy the zip file you earlier downloaded (unextracted) onto an SDHC card or you may try another download via this link <http://www.androidfilehost.com/?fid=23269279319199494>. If you are able to successfully flash custom recovery, don't allow the phone to reboot but remove the battery and insert the card. Then boot into custom recovery and flash the zip from the SDHC card. Clear the cache and reset and, hopefully, your phone will be back in business.

stuck on stock nb4 bootloader, unable to flash custom recovery

Trying to figure this out. Browsed forums for the last 24 hours, unable to come up with a way to figure it out. I was running Effortless rom, and older version that I can't remember, but it was on NF6 firmware. I wanted to play around with cm11 so I decided to flash back to stock NF6 then update to NF9 for the VOLTE update just to have it. So I triangled away, wiped then rooted and installed TWRP via ODIN, made a backup, everything went fine. Then I downloaded cm11 and gapps 4.4.4 and put them on my internal sd and went to flash in TWRP but cm11 was giving me errors. I figured it may have been TWRP so i decided to flash CWM but no go. It wouldn't stick. Tried again, no luck. Downloaded ROM Manager and this time I installed CWM through there. Tried rebooting in to recovery and ended up getting stuck in the "recovery booting" bootloop, so I flashed stock NF9(since I was on this firmware now) and tried installing CWM again, no luck. When I tried booting to recovery, it was stock NB4 recovery. I'm thinking that I'm stuck on an old bootloader and the recovery isn't NF9, which is the current stock recovery. I'm thinking that the reason why I'm unable to flash anything in TWRP/unable to install CWM at all is because of the stock recovery and possibly bootloader being NB4 for some reason while my baseband and build are both NF9. Any ideas/help would be appreciated. Thanks guys.
re: custom recovery
pyr0path said:
Trying to figure this out. Browsed forums for the last 24 hours, unable to come up with a way to figure it out. I was running Effortless rom, and older version that I can't remember, but it was on NF6 firmware. I wanted to play around with cm11 so I decided to flash back to stock NF6 then update to NF9 for the VOLTE update just to have it. So I triangled away, wiped then rooted and installed TWRP via ODIN, made a backup, everything went fine. Then I downloaded cm11 and gapps 4.4.4 and put them on my internal sd and went to flash in TWRP but cm11 was giving me errors. I figured it may have been TWRP so i decided to flash CWM but no go. It wouldn't stick. Tried again, no luck. Downloaded ROM Manager and this time I installed CWM through there. Tried rebooting in to recovery and ended up getting stuck in the "recovery booting" bootloop, so I flashed stock NF9(since I was on this firmware now) and tried installing CWM again, no luck. When I tried booting to recovery, it was stock NB4 recovery. I'm thinking that I'm stuck on an old bootloader and the recovery isn't NF9, which is the current stock recovery. I'm thinking that the reason why I'm unable to flash anything in TWRP/unable to install CWM at all is because of the stock recovery and possibly bootloader being NB4 for some reason while my baseband and build are both NF9. Any ideas/help would be appreciated. Thanks guys.
Click to expand...
Click to collapse
If I were you the first thing I would do is to ODIN flash TWRP recovery
and go from there.
Here is a direct download link for the latest odin flash twrp
custom recovery for the N900T Note 3:
https://app.box.com/AndroidShare
Once you get into twrp recovery do a complete wipe
which includes wipe data, system, cache, dalvik and
last but not least do a factory reset in twrp.
When that's done odin flash the official stock N900T NF9
firmware which can be found at http://SamMobile.com
After that's done you will need to odin flash cf-autoroot
and then odin flash twrp recovery again.
Here is the download link for cf-autoroot:
https://app.box.com/s/rgovggya5gkc51lc1uax
Then simply copy your favorite N900T zip file rom into
your internal sd and flash the N900T rom of your choice.
Be sure to do a full and complete wipe again before
flashing any custom roms.
Good luck!

Categories

Resources