Develop Bugs

help - I did something bad

I know I didn't brick my phone because I can still get into bootloader. I've tried to connect to Odin (several times following instructions to remove battery, restart pc, etc) and Odin won't recognize phone in bootloader. I was trying to update to gingerbread 2.3.5 using Odin and it got stuck. it said 'writing, wait 2 minutes' and I waited 8 mins and it never did anything. was I just inpatient? Now when I try to restart my phone it tells me manual files were installed and to hit the OK button. I have no OK button and I've tried all the screen buttons and the 3 hardware buttons to select 'reboot' as instructed per the phone and none work. So I pull the battery and start the vicious cycle all over again. I've been searching and searching (for the past 2hrs) trying to solve this on my own and I'm stuck. I need this phone as it's my work phone and I just got it Friday! (owned by me, not my company thankfully!) please help. thank you.

lol looks like u got urself a sweet paperweight haha. 1st of all make sure u have all the drivers installed, secondly it might be ur usb cable too

klyang88 said:
lol looks like u got urself a sweet paperweight haha. 1st of all make sure u have all the drivers installed, secondly it might be ur usb cable too
Click to expand...
Click to collapse
I could previously connect to Odin so I wouldn't think it was the drivers or the cable. I hope I didn't really brick it! I can't afford a new one! booo

nursemm05 said:
I could previously connect to Odin so I wouldn't think it was the drivers or the cable. I hope I didn't really brick it! I can't afford a new one! booo
Click to expand...
Click to collapse
have u tried a different usb plug in hole?

Pulling the cable on a Odin flash is the quickest way to ruin your phone. Should have left it plugged in and looked around real quick for an answer.

klyang88 said:
have u tried a different usb plug in hole?
Click to expand...
Click to collapse
I have and another computer. still no luck. Won't recognize it.
tenaciousj said:
Pulling the cable on a Odin flash is the quickest way to ruin your phone. Should have left it plugged in and looked around real quick for an answer.
Click to expand...
Click to collapse
doesn't help to tell me what I should've done. Is this fixable or not?

nursemm05 said:
I have and another computer. still no luck. Won't recognize it.
doesn't help to tell me what I should've done. Is this fixable or not?
Click to expand...
Click to collapse
if u can still get into odin mode, then yes it should still be fixable

The only thing I can think of as I have never seen this B4. try holding power down,it takes awhile but it should reboot. I will try to get ahold of more info for you. No promises though. But rule of thumb Be patient.
One last thing where did you get the update from? ie 2.3.5. It helps to know what you were trying to flash.

Indrid Cole said:
The only thing I can think of as I have never seen this B4. try holding power down,it takes awhile but it should reboot. I will try to get ahold of more info for you. No promises though. But rule of thumb Be patient.
One last thing where did you get the update from? ie 2.3.5. It helps to know what you were trying to flash.
Click to expand...
Click to collapse
just tried that and it gives me the same screen I was getting when I just pressed the power button to turn on. then it says to press OK to reboot and none of the buttons work to reboot.

nursemm05 said:
I know I didn't brick my phone because I can still get into bootloader. I've tried to connect to Odin (several times following instructions to remove battery, restart pc, etc) and Odin won't recognize phone in bootloader. I was trying to update to gingerbread 2.3.5 using Odin and it got stuck. it said 'writing, wait 2 minutes' and I waited 8 mins and it never did anything. was I just inpatient? Now when I try to restart my phone it tells me manual files were installed and to hit the OK button. I have no OK button and I've tried all the screen buttons and the 3 hardware buttons to select 'reboot' as instructed per the phone and none work. So I pull the battery and start the vicious cycle all over again. I've been searching and searching (for the past 2hrs) trying to solve this on my own and I'm stuck. I need this phone as it's my work phone and I just got it Friday! (owned by me, not my company thankfully!) please help. thank you.
Click to expand...
Click to collapse
Of the responses so far, I'd start with a new microUSB cable. Whether the current cable worked 30 seconds ago or not, that could certainly be a potential issue, might as well rule it out.
After that, a few things to consider:
1) Can you get into recovery? [Hold Vol. Up] + [Power] for as long as it takes to get to the recovery screen (anywhere from 15 seconds to two minutes of solid holding.) If you can get to recovery, you are going to be in business. If after 120 seconds it hasn't gone into recovery, move on.
2) In your post, you refer to "bootloader", technically correct, but want to make sure you are referring to Odin download mode. The whole "instructions to remove battery, restart pc, etc" throws me off, you shouldn't have to do any of that. Just to make sure, what you want to do is:
Start up Odin 1.85 on your PC
Power down phone
Wait for capacitative button lights to turn off
Simultaneously Press and Hold [Power] + [Vol. Dn] until confirmation screen appears
Press [Vol. Up] to enter Download mode
Connect USB cable to the phone and then to the PC
ODIN should show COM port in first slot
3) If you can successfully get into ODM and the COM port in the first slot lights up, you are golden. Follow the rest of the steps here and you are all set to move forward or hang out from that point.
4) "I was trying to update to gingerbread 2.3.5 using Odin and it got stuck. it said 'writing, wait 2 minutes' and I waited 8 mins" I'm thinking maybe you flashed with Bootloader, Phone or CSC selected rather than PDA in the Odin menu. If that is the case you should still be able to get into ODM as shown above.

Just_s said:
1) Can you get into recovery? [Hold Vol. Up] + [Power] for as long as it takes to get to the recovery screen (anywhere from 15 seconds to two minutes of solid holding.) If you can get to recovery, you are going to be in business. If after 120 seconds it hasn't gone into recovery, move on.
Click to expand...
Click to collapse
yes, that is where it tells me media files have been installed and to press OK to reboot the phone (and other options to wipe data, cache, etc). It is not CWM recovery.
2) In your post, you refer to "bootloader", technically correct, but want to make sure you are referring to Odin download mode. The whole "instructions to remove battery, restart pc, etc" throws me off, you shouldn't have to do any of that. Just to make sure, what you want to do is:
Start up Odin 1.85 on your PC
Power down phone
Wait for capacitative button lights to turn off
Simultaneously Press and Hold [Power] + [Vol. Dn] until confirmation screen appears
Press [Vol. Up] to enter Download mode
Connect USB cable to the phone and then to the PC
ODIN should show COM port in first slot
Click to expand...
Click to collapse
Yes, Odin mode by doing what you said. I was referring to what to do if Odin won't connect. Remove battery, restart PC and try to reconnect to Odin
3) If you can successfully get into ODM and the COM port in the first slot lights up, you are golden. Follow the rest of the steps here and you are all set to move forward or hang out from that point.
Click to expand...
Click to collapse
therein lies the problem, I can't get the first slot to show yellow to show it's connected.
4) "I was trying to update to gingerbread 2.3.5 using Odin and it got stuck. it said 'writing, wait 2 minutes' and I waited 8 mins" I'm thinking maybe you flashed with Bootloader, Phone or CSC selected rather than PDA in the Odin menu. If that is the case you should still be able to get into ODM as shown above.
Click to expand...
Click to collapse
yes. I followed these instructions -
Check only Re partition, Auto reboot & F. Reset time in option
Put the files like this in Odin:
PIT = u1_02_20110310_emmc_EXT4.pit,
PDA = CODE_I9100XXKI3_CL577579_REV02_user_low_ship.tar.md5,
PHONE= MODEM_I9100XXKI3_REV_02_CL1062028.tar.md5,
CSC = GT-I9100-CSC-MULTI-OXAKI3.tar.md5
Hit the start button and process will begin

just tried another cable, no joy.

nursemm05 said:
yes, that is where it tells me media files have been installed and to press OK to reboot the phone (and other options to wipe data, cache, etc). It is not CWM recovery.
Yes, Odin mode by doing what you said. I was referring to what to do if Odin won't connect. Remove battery, restart PC and try to reconnect to Odin
therein lies the problem, I can't get the first slot to show yellow to show it's connected.
yes. I followed these instructions -
Check only Re partition, Auto reboot & F. Reset time in option
Put the files like this in Odin:
PIT = u1_02_20110310_emmc_EXT4.pit,
PDA = CODE_I9100XXKI3_CL577579_REV02_user_low_ship.tar.md5,
PHONE= MODEM_I9100XXKI3_REV_02_CL1062028.tar.md5,
CSC = GT-I9100-CSC-MULTI-OXAKI3.tar.md5
Hit the start button and process will begin
Click to expand...
Click to collapse
"GT-I9100-CSC-MULTI-OXAKI3.tar.md5"? Aren't you on the E4GT? So flashing all of these files for an international SGSII would be the first issue. What forum did you get these from?
This might be a big issue afterall. Get back to me on where you got the files and I'll see if I can come up with something in the meantime.
EDIT: One thing that will work for sure, but you'd have to wait for it to come in is a $2 jig. Once you get it, you'll back in business in less than 2 seconds. Mine took 5 days via standard shipping. You could do expedited shipping if you need it faster. In lieu of that, I will keep thinking about what you can do tonight.
EDIT 2: I know you said that you have driver's installed an all, but if you downloaded them where you got those files, they might not be what you need for this phone. You might try going to the E4GT Auto Root thread and get everything you need to start fresh from there.
Then/or try this again:
Disconnect phone, and remove battery (wait 30 -60 seconds or so).
Re-insert the battery and power the phone as I noted before by simultaneously pressing and holding [Power] + [Vol. Dn] until confirmation screen appears
Press [Vol. Up] to enter Download mode
Make sure NPS and KIES are NOT running IMPORTANT
Start up Odin v1.85
Keep trying to connect the phone to get a COM port lit. If it's not working, try changing USB ports. Try every port on your PC.
Keep trying, I've seen odin fail to recognize phones over and over and then
suddenly recognize it out of nowhere.

Just_s said:
"GT-I9100-CSC-MULTI-OXAKI3.tar.md5"? Aren't you on the E4GT? So flashing all of these files for an international SGSII would be the first issue. What forum did you get these from?
This might be a big issue afterall. Get back to me on where you got the files and I'll see if I can come up with something in the meantime.
Click to expand...
Click to collapse
oh crap! I just saw the GT-I9100 and thought I was good. I don't remember when I got them originally but just found it again here

Just_s said:
EDIT: One thing that will work for sure, but you'd have to wait for it to come in is a $2 jig. Once you get it, you'll back in business in less than 2 seconds. Mine took 5 days via standard shipping. You could do expedited shipping if you need it faster. In lieu of that, I will keep thinking about what you can do tonight.
Click to expand...
Click to collapse
this will work even though I can get into odin download mode? I can wait a few days instead of buying a new phone if it will really work!

nursemm05 said:
this will work even though I can get into odin download mode? I can wait a few days instead of buying a new phone if it will really work!
Click to expand...
Click to collapse
Yes, the jig should definitely work and it is a good idea to have one around anyway, just in case you ever need to go back to stock to return the phone or something.
But I am certain you can fix it at home in the meantime. I just need to remember or find how.

Just_s said:
Yes, the jig should definitely work and it is a good idea to have one around anyway, just in case you ever need to go back to stock to return the phone or something.
But I am certain you can fix it at home in the meantime. I just need to remember or find how.
Click to expand...
Click to collapse
I am going to order one just in case but in the meantime, going to try one more time to get Odin to cooperate then I'm done for the night. Sadly work calls tomorrow and I can't do any of this on my work computer either thank you SOOO much for all your help!

nursemm05 said:
oh crap! I just saw the GT-I9100 and thought I was good. I don't remember when I got them originally but just found it again here
Click to expand...
Click to collapse
Yeah, definitely not the right files for our phone, but don't worry, yet, I think you can recover from this. The fear is that the radio is borked as those are GSM phones and we are a CDMA phone. I haven't really read much about this issue, but I know it has happened to others. If you have time, you might search around for something like "oops, flashed SGSII GSM files on my E4GT CDMA phone" or something like that and see if anyone else figured out the fix.

I did not think there was a update to 2.3.5 for the epic 4g touch. I thought only the European versions received that update. The only update I know of for our phones was 2.3.6.
Plz link or direct where you downloaded this update you flashed. If it is the European update you will need to install the drivers for that model for Odin to recognize your phone. Then reflash the proper update.
---------- Post added at 10:18 PM ---------- Previous post was at 10:14 PM ----------
Indrid Cole said:
I did not think there was a update to 2.3.5 for the epic 4g touch. I thought only the European versions received that update. The only update I know of for our phones was 2.3.6.
Plz link or direct where you downloaded this update you flashed. If it is the European update you will need to install the drivers for that model for Odin to recognize your phone. Then reflash the proper update.
Click to expand...
Click to collapse
Wow bythe time I typed this all is revealed. The 2.3.5 was the giveaway.
---------- Post added at 10:22 PM ---------- Previous post was at 10:18 PM ----------
Indrid Cole said:
I did not think there was a update to 2.3.5 for the epic 4g touch. I thought only the European versions received that update. The only update I know of for our phones was 2.3.6.
Plz link or direct where you downloaded this update you flashed. If it is the European update you will need to install the drivers for that model for Odin to recognize your phone. Then reflash the proper update.
---------- Post added at 10:18 PM ---------- Previous post was at 10:14 PM ----------
Wow bythe time I typed this all is revealed. The 2.3.5 was the giveaway.
Click to expand...
Click to collapse
It should not kill your radio. I fixed a buddys phone that kinda did the same thing. Main thing is get the drivers for the euro sgs 2. Then Odin should see your device. Then use just s's guide from there.
One last thing the jig is not be needed. You can already get into download mode. Your phone is ready for flashing. What you need are drivers for the the computer to recognize your phone.

Indrid Cole said:
...the European update you will need to install the drivers for that model for Odin to recognize your phone. Then reflash the proper update.
It should not kill your radio. I fixed a buddys phone that kinda did the same thing. Main thing is get the drivers for the euro sgs 2. Then Odin should see your device. Then use just s's guide from there.
Click to expand...
Click to collapse
Yep, this is exactly right.
@nursemm05 you need to find and install the drivers for the phone who's files you flashed. Make sure you know where you save the driver files and where they are installed. In fact, make a backup of your system so that you can restore your PC after you get your ET4G back to good.
Once you can get back into Odin, flash the tar file (singular) that I linked to and you will be back at stock. Then you can hit the other links and you will be very happy with your new setup.
Then do a system restore on your PC to before the i9000 driver's were installed and you should be back to good there as well.
Good luck!

[Q] boot loop after using mobile odin...please tell me not hard brick

Hey everyone, first time posting, but followed this forum for a while now.
Ok, so I had been running CM10 on my ICS S3 for a while, but wanted to start fresh and upgrade to JB, and see how I liked it. I followed this link:
androidrootz.c o m/2012/10/how-to-unroot-samsung-galaxy-s3-no.html
to flash my stock ROM back to the phone. (Hope linking is permitted, if not I apologize). I am on Mac and therefore used Mobile Odin Pro to help me achieve a fresh S3. I started at step 4, bc I didn't care to reset my flash counter. Everything was going smoothly until I hit step 15. It's here that the phone will flash the Samsung boot screen momentarily, then show the "blue droid" running script for less than a second, and repeat over and over again.
I've attempted to put it in recovery/download(is there a difference between the two) mode, but the phone repeatedly does what was just described. What options do I have to get this phone back in working order?
Please help me, King Newb, if there is actually any help that can be given. I really don't like using my old iPhone as my primary again. I just want my S3 back, preferably running JB and rooted. Please and thanks guys.
Out.

HungJury said:
Hey everyone, first time posting, but followed this forum for a while now.
Ok, so I had been running CM10 on my ICS S3 for a while, but wanted to start fresh and upgrade to JB, and see how I liked it. I followed this link:
androidrootz.c o m/2012/10/how-to-unroot-samsung-galaxy-s3-no.html
to flash my stock ROM back to the phone. (Hope linking is permitted, if not I apologize). I am on Mac and therefore used Mobile Odin Pro to help me achieve a fresh S3. I started at step 4, bc I didn't care to reset my flash counter. Everything was going smoothly until I hit step 15. It's here that the phone will flash the Samsung boot screen momentarily, then show the "blue droid" running script for less than a second, and repeat over and over again.
I've attempted to put it in recovery/download(is there a difference between the two) mode, but the phone repeatedly does what was just described. What options do I have to get this phone back in working order?
Please help me, King Newb, if there is actually any help that can be given. I really don't like using my old iPhone as my primary again. I just want my S3 back, preferably running JB and rooted. Please and thanks guys.
Out.
Click to expand...
Click to collapse
Actually, you can't post links cause you're a new user.
Here's what you should follow: http://forum.xda-developers.com/showthread.php?t=1822308
To get in download mode: Hold Vol down+Home + Power button
To get in recovery mode: Hold Vol up+Home + Power button
Instead of getting CWM, I would suggest getting TWRP, which can be done by downloading goomanager from the play store. (After you're done flashing stock rooted JB from the link above).

I am on Mac, is there an alternative to Odin, or a version that runs on OS X?
Thank you for putting me on the right track

HungJury said:
I am on Mac, is there an alternative to Odin, or a version that runs on OS X?
Thank you for putting me on the right track
Click to expand...
Click to collapse
Mobile Odin or Heimdall.

OK, I need a little more clarification. My phone doesn't boot, so are you saying that I can use Mobile Odin right on my Mac, and is it possible to link me to a proper copy of Heimdall? Also, is there perhaps a step by step instruction set for getting me back to a functioning phone? I clicked your link and found a ton of information, but still unsure which set of steps I need to follow.
Thanks again for your patience.

HungJury said:
OK, I need a little more clarification. My phone doesn't boot, so are you saying that I can use Mobile Odin right on my Mac, and is it possible to link me to a proper copy of Heimdall? Also, is there perhaps a step by step instruction set for getting me back to a functioning phone? I clicked your link and found a ton of information, but still unsure which set of steps I need to follow.
Thanks again for your patience.
Click to expand...
Click to collapse
Oh my bad, I replied fast (covering a lot of threads right now). Mobile Odin won't work.. And I haven't seen Heimdall around here. Sorry.
The easiest way would be to use a PC. I'll keep looking for what can be done on Macs (you should do the same )

I followed the steps to the link (used virtual machine) but when I get to the step where you press start, Odin just says "all threads completed. (succeeded 0/failed 0). So I think I'm getting close but not quite there yet.
Would it have something to do with the boot loader option? Just curious because of the boot loop I've been stuck in. Btw, I can't get my phone into recovery mode, however download mode still works fine, if that matters.

Another quick update. I've now been able to get into the phone by holding both volume buttons and the power button. Phone boots normally with cm boot logo. However the phone is completely wiped except for stock apps it comes with. This gives me a little more hope but still not sure where to go from here.

Bump. Can't anyone point me in the right direction? My situation is quite unique, as I have found another person explain it happening to them during my search. Want to get this fixed ASAP.
Thanks!

HungJury said:
Bump. Can't anyone point me in the right direction? My situation is quite unique, as I have found another person explain it happening to them during my search. Want to get this fixed ASAP.
Thanks!
Click to expand...
Click to collapse
Download this if you are us using AT&T and if not use the drop down menu on the top left and pick your device and download the latest jellybean update:
http://samsung-updates.com/device/?id=SGH-I747
Flash this download via mobile Odin. Read mobile Odin's directions carefully. You can so keep root of you wanted to through this app. This download will bring you back yo complete stock and will work for you.

HungJury said:
Hey everyone, first time posting, but followed this forum for a while now.
Ok, so I had been running CM10 on my ICS S3 for a while, but wanted to start fresh and upgrade to JB, and see how I liked it. I followed this link:
androidrootz.c o m/2012/10/how-to-unroot-samsung-galaxy-s3-no.html
to flash my stock ROM back to the phone. (Hope linking is permitted, if not I apologize). I am on Mac and therefore used Mobile Odin Pro to help me achieve a fresh S3. I started at step 4, bc I didn't care to reset my flash counter. Everything was going smoothly until I hit step 15. It's here that the phone will flash the Samsung boot screen momentarily, then show the "blue droid" running script for less than a second, and repeat over and over again.
I've attempted to put it in recovery/download(is there a difference between the two) mode, but the phone repeatedly does what was just described. What options do I have to get this phone back in working order?
Please help me, King Newb, if there is actually any help that can be given. I really don't like using my old iPhone as my primary again. I just want my S3 back, preferably running JB and rooted. Please and thanks guys.
Out.
Click to expand...
Click to collapse
I'm having the exact same problem. Is there a solution I need one so bad

I have the same problem as the OP.
I CAN NOT get it into recovery mode.
I CAN get it into download mode.
Is my only option to use ODIN on a windows PC? Does anyone have any clue of what software to download and from where?
Oli

Yeah, I would try that. I'm not to familiar with mobile Odin. I do know that after running certain roms, if you Odin to stock you need to do a factory reset from recovery after the Odin flash.

You're not going to be able to flash stock via odin if you can't get into download mode.
What OS did you come from? What did you do just before this all happened?
Try recovery mode again (vol up + home + power). Release only the power button when the phone vibrates and you see the blue script in the top left corner. Report back

He can get dl mode, not recovery

mrhaley30705 said:
He can get dl mode, not recovery
Click to expand...
Click to collapse
I stand corrected. I should wake up more before I hop on the boards. Cheers

Maybe you don't have cwm installed anymore since you wiped your phone. Try downloading rom manager and flashing cwm recovery then see if you can get into recovery mode.
Sent from my SAMSUNG-SGH-I747

Phone won't boot, can't use Rom manager to flash cwm. I stand by what I said. Flash to rooted stock, use goo manager (or Rom manager) to install custom recovery. Dl and flash Rom.

Mobile Odin works much like the desktop version. The Odin package usually has a recovery so CWM or TWRP will be replaced by stock recovery. Although mobile Odin does have the ability to exclude recovery from the flash. So you will have to get back into down load mode use the desktop version of Odin to stock then flash cfroot with Odin. Now you should be able to get into recovery as cfroot has CWM
Sent from my SAMSUNG-SGH-I747 using xda premium

enewman17 said:
Mobile Odin works much like the desktop version. The Odin package usually has a recovery so CWM or TWRP will be replaced by stock recovery. Although mobile Odin does have the ability to exclude recovery from the flash. So you will have to get back into down load mode use the desktop version of Odin to stock then flash cfroot with Odin. Now you should be able to get into recovery as cfroot has CWM
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
My way has one less Odin flash

my Lg pad wont boot up. pls help see Image

after I tried unsuccesfull to Install a custom rom I got this msg and my lg pad wont start anymore...
can any1 help me pls? see Image at attachments.

No attachment. Do you get LG logo and bootloop? If so, don't worry mate.

CuraeL said:
No attachment. Do you get LG logo and bootloop? If so, don't worry mate.
Click to expand...
Click to collapse
there Is now. pls help me mate

Aha, did you use the wrong recovery? I'm gonna take a blind-shot and think that you did. ;/ So maybe you cannot flash CM on it. It is common mistake. - What you are seeing right now is the stock LG charging pre-system. I think you have wiped the image from the system, so it shows you the RAW data instead.
Well, let it charge to 20-25%
Then do this:
1. Unplug the tablet from charger and let it turn fully off.
2. Press and HOLD Volume Down + Power Button.
3. On LG Logo appear, ONLY release Power key, still holding Volume Down. Then quickly press and hold Power and Volume UP also. So now you hold all three buttons. So you need three fingers.
This should take you to "Factory Reset", but when you have custom recovery, you can press Power and you will come to custom recovery. I think you can mount the external SD card and then flash a new recovery. Go find PhilZ recovery in the Original Android Development sub-forum here. You just flash the Zip inside of TWRP. When that is done, reboot and repeat the steps on the top of this post, then flash CM.
Keep on trying the key combo, it is a bit tricky, but it works. While you try and get to recovery, download PhilZ CWM touch and prepare the SD card on your computer, if you have the option.
Good luck.

CuraeL said:
Aha, did you use the wrong recovery? I'm gonna take a blind-shot and think that you did. ;/ So maybe you cannot flash CM on it. It is common mistake. - What you are seeing right now is the stock LG charging pre-system. I think you have wiped the image from the system, so it shows you the RAW data instead.
Well, let it charge to 20-25%
Then do this:
1. Unplug the tablet from charger and let it turn fully off.
2. Press and HOLD Volume Down + Power Button.
3. On LG Logo appear, ONLY release Power key, still holding Volume Down. Then quickly press and hold Power and Volume UP also. So now you hold all three buttons. So you need three fingers.
This should take you to "Factory Reset", but when you have custom recovery, you can press Power and you will come to custom recovery. I think you can mount the external SD card and then flash a new recovery. Go find PhilZ recovery in the Original Android Development sub-forum here. You just flash the Zip inside of TWRP. When that is done, reboot and repeat the steps on the top of this post, then flash CM.
Keep on trying the key combo, it is a bit tricky, but it works. While you try and get to recovery, download PhilZ CWM touch and prepare the SD card on your computer, if you have the option.
Good luck.
Click to expand...
Click to collapse
thanks for your reply.
yes I did use the wrong recovery, as a matter of fact I didnt know which one to use so I choose one randomly
the bad thing I did what u said. and nothing happened .. still stuck at the lg logo and Is not charging anymore...

Keep on trying the key combo. Hold power + volume down, when logo comes, release power, still hold volume down, then also hold power and volume up, so you hold all 3 buttons. But never release volume down.

CuraeL said:
Keep on trying the key combo. Hold power + volume down, when logo comes, release power, still hold volume down, then also hold power and volume up, so you hold all 3 buttons. But never release volume down.
Click to expand...
Click to collapse
hey man thanks for ur post.
I did what u said and It appears a factory reset mode and then I hit power to do a factory reset and then reset with the lg logo being stuck again :/ any luck?
thanks

ANTRIK said:
hey man thanks for ur post.
I did what u said and It appears a factory reset mode and then I hit power to do a factory reset and then reset with the lg logo being stuck again :/ any luck?
thanks
Click to expand...
Click to collapse
No custom recovery. Hn, we must do another thing then, wait a second. I must find a text and copy it to you from another post, brb. We must go to download mode instead when no recovery.

I did what u said and It appears a factory reset mode and then I hit power to do a factory reset and THEN A TEAM RECOVERY STARTS AGAIN AND LG LOGO STUCK AGAIN

ANTRIK said:
hey man thanks for ur post.
I did what u said and It appears a factory reset mode and then I hit power to do a factory reset and then reset with the lg logo being stuck again :/ any luck?
thanks
Click to expand...
Click to collapse
Here is quote from someone else I found in another place but shutdown the thread without thinking.
I use the download mode to install the original official rom.
1. Download the LG MOBILE SUPPORT TOOL by this link:http://www.lg.com/us/support-mobile/lg-V500-White
2. install the software in computer, Plug in USB cable with computer, Open the software LG MOBILE SUPPORT TOOL.
3. Turn off Pad and unplug.
4. press hold both volume up and volume down, Then plug in usb cable, And then pad is in downlaod mode
5. USB driver will be insatlled automatically
6. In LG MOBILE SUPPORT TOOL, click option---.country and language-OK, then click option--upgrade recovery
7. It will installe original official rom automatically.
8. After about 1.5 hours, The pad will be installed the last official room.
^ This is a quote and now I shut down the thread, sorry, don't know who said it, just got stoked when I saw it.
---------- Post added at 03:17 PM ---------- Previous post was at 03:13 PM ----------
ANTRIK said:
I did what u said and It appears a factory reset mode and then I hit power to do a factory reset and THEN A TEAM RECOVERY STARTS AGAIN AND LG LOGO STUCK AGAIN
Click to expand...
Click to collapse
What? You got recovery booted but it restarted itself again to LG screen? If you can, just stay in recovery.

CuraeL said:
No custom recovery. Hn, we must do another thing then, wait a second. I must find a text and copy it to you from another post, brb. We must go to download mode instead when no recovery.
Click to expand...
Click to collapse
lol I was there
download mode please do not uplug...
but I turned It off
dont know how do I get there ;p

ANTRIK said:
lol I was there
download mode please do not uplug...
but I turned It off
dont know how do I get there ;p
Click to expand...
Click to collapse
Click on PC SYNC and download the only file, PC Suite, it has program in it. Then follow guide.
http://imgur.com/kzHc2sa

CuraeL said:
Click on PC SYNC and download the only file, PC Suite, it has program in it. Then follow guide.
http://imgur.com/kzHc2sa
Click to expand...
Click to collapse
thank you so much man you saved my life
I did everything u said and Its working again .
In order to Install cm11 which recovery should I use? I used this one before twrp 2.6.3.0.img awifi

ANTRIK said:
thank you so much man you saved my life
I did everything u said and Its working again .
In order to Install cm11 which recovery should I use? I used this one before twrp 2.6.3.0.img awifi
Click to expand...
Click to collapse
Go into http://forum.xda-developers.com/showthread.php?t=2551499 and scroll down to downloads.
You are on stock ROM, meaning you wanna go and check in your system settings - about tablet for the software information. Choose one of the three: V50010a, V50010c or V500e. Download the right one for your device. Then a few lines lower, download "Loki" from the link.
Enable developer settings in your Tablet and follow the adb instructions in the thread. This is the TWRP you need to flash a KitKat rom. The older versions will fck up your device. - Remember to root before you begin!

CuraeL said:
Go into http://forum.xda-developers.com/showthread.php?t=2551499 and scroll down to downloads.
You are on stock ROM, meaning you wanna go and check in your system settings - about tablet for the software information. Choose one of the three: V50010a, V50010c or V500e. Download the right one for your device. Then a few lines lower, download "Loki" from the link.
Enable developer settings in your Tablet and follow the adb instructions in the thread. This is the TWRP you need to flash a KitKat rom. The older versions will fck up your device. - Remember to root before you begin!
Click to expand...
Click to collapse
hey man thanks for ur reply.
so far we are In the same page
I downloaded v50010a which Is my devIce then loki zip
but I have no Idea what Is cdm and adb I tried to open cmd and run thoose commands but I getting eroor adb not support something like that.
although I download adb.exe and fastbook and Installed It.
Is It any way to flash recovery though my tablet like goo apps or rom manager ?
thanks.

Go here, http://forum.xda-developers.com/showthread.php?t=2553192
Read first post, donwload and enable developer options on Tablet.
Then download and run the .bat file. Then you get root.
Then you go download the V50010a.lok file and you rename the file to V50010a.img instead.
Then you go to market on phone and search for "Flashify", and you flash the .img in there. (I don't use it, but many people does.)
I recommend you study a bit on adb and fastboot for another time, since if anything crashes, adb is the way to go. Not Flashify. But for now Flashify GUI should be fine. Just remember the root first.
This is the last question I will help you with since all of your questions has been in other threads and you should be able to find them in the forums.

CuraeL said:
Go here, http://forum.xda-developers.com/showthread.php?t=2553192
Read first post, donwload and enable developer options on Tablet.
Then download and run the .bat file. Then you get root.
Then you go download the V50010a.lok file and you rename the file to V50010a.img instead.
Then you go to market on phone and search for "Flashify", and you flash the .img in there. (I don't use it, but many people does.)
I recommend you study a bit on adb and fastboot for another time, since if anything crashes, adb is the way to go. Not Flashify. But for now Flashify GUI should be fine. Just remember the root first.
This is the last question I will help you with since all of your questions has been in other threads and you should be able to find them in the forums.
Click to expand...
Click to collapse
YES! YES! YES!
I did It Installed cm11
thanks man for your time!
u know good things happen to good people. and u re a good guy
god will reward you!
thanks.

ANTRIK said:
YES! YES! YES!
I did It Installed cm11
thanks man for your time!
u know good things happen to good people. and u re a good guy
god will reward you!
thanks.
Click to expand...
Click to collapse
Happy to help, see you on the forums.

[Q] s4 mini doesnt work

my phone dosn't turn on it just flashes the Samsung when i boot it up. i need help dont know what to do
help please

epiczsniperz said:
my phone dosn't turn on it just flashes the Samsung when i boot it up. i need help dont know what to do
help please
Click to expand...
Click to collapse
Boot it holding the volume up button. This should get you into so-called "recovery" where you can, among other things, restore it to defaults.
If recovery also doesn't work (which would be unusual), boot it holding volume DOWN button. This will get you into a "download" mode where you can use ODIN to flash new recovery (such as CWM recovery which is very nice and powerful), or even flash entire firmware from scratch.
Good luck, let us know how it goes ~
[edit] oh and do all that while having it connected to USB power, in case the battery is empty.

still doesnt work
sysKin said:
Boot it holding the volume up button. This should get you into so-called "recovery" where you can, among other things, restore it to defaults.
If recovery also doesn't work (which would be unusual), boot it holding volume DOWN button. This will get you into a "download" mode where you can use ODIN to flash new recovery (such as CWM recovery which is very nice and powerful), or even flash entire firmware from scratch.
Good luck, let us know how it goes ~
[edit] oh and do all that while having it connected to USB power, in case the battery is empty.
Click to expand...
Click to collapse
I tried both methods. Is my phone fixable. I messed it up somehow with Odin and I might have deleqted the software can I reinstall it onto my phone help please

Help!!!!
epiczsniperz said:
I tried both methods. Is my phone fixable. I messed it up somehow with Odin and I might have deleqted the software can I reinstall it onto my phone help please
Click to expand...
Click to collapse
I have the same problem , did you advance it? thx

help
cellsan said:
I have the same problem , did you advance it? thx
Click to expand...
Click to collapse
i couldnt fix it none of the steps worked. what about you?

epiczsniperz said:
I tried both methods
Click to expand...
Click to collapse
Could you clarify what happens when you do those methods exactly?
I think the download mode should basically always work...
[edit] oh wait, I think I mislead you by accident (sorry!). You should boot while holding HOME and volume up (recovery) or down (download).

stilll nothing
​
sysKin said:
Could you clarify what happens when you do those methods exactly?
I think the download mode should basically always work...
[edit] oh wait, I think I mislead you by accident (sorry!). You should boot while holding HOME and volume up (recovery) or down (download).
Click to expand...
Click to collapse
I notice no changes when I did them methods my phone still doesnt turn on

still nothing
I downloaded recovery clockwork and installed . On oden it said pasd but now I cant access recovery booting either

epiczsniperz said:
I downloaded recovery clockwork and installed . On oden it said pasd but now I cant access recovery booting either
Click to expand...
Click to collapse
Anything doesn't work , When I boot while holding HOME and volume up (recovery) appears the blue advice in the upper left corner and about 2 segs after the cellphone restart again, again and so on, When I boot with the down (download) the process on kies working good but when ends the cellphone restart again, again and so on. I'm start to think that something in the hardware is damage :crying:

looks like you messed something up there...
Anyway, if your phone is rooted, and/or you don't care about warranty you can get it in download mode (you said it works fine with kies until reset, so I suppose it means that download mode is at least accessible).
And after that use Odin to reinstall the stock rom completely.
Or, again with Odin install custom recovery, and then whatever ROM you like.
While working with odin, be sure to stick to the guides here on XDA. (for a custom recovery see: http://forum.xda-developers.com/showthread.php?t=2364980)

smartxdev said:
looks like you messed something up there...
Anyway, if your phone is rooted, and/or you don't care about warranty you can get it in download mode (you said it works fine with kies until reset, so I suppose it means that download mode is at least accessible).
And after that use Odin to reinstall the stock rom completely.
Or, again with Odin install custom recovery, and then whatever ROM you like.
While working with odin, be sure to stick to the guides here on XDA. (for a custom recovery see: http://forum.xda-developers.com/showthread.php?t=2364980)
Click to expand...
Click to collapse
I have the custom stock but it still wont boot up

epiczsniperz said:
I have the custom stock but it still wont boot up
Click to expand...
Click to collapse
If you're not entirely stock you'll have trouble using Kies.
I myself had trouble when tried to revert to stock ROM from CM.
It failed to restore NANDroid backup every time, and I also didn't succeed in flashing the stock image with Odin as well.
In the end, I succeeded with this ROM (which is modified stock TW), usin ODIN. You can try this, just read and understand the instructions in the thread before you do anything.
Ironically, after a couple of days after reverting to stock rom I was so annoyed by the speed decrease compared to CM, that I reinstalled CyanogenMod back, found TouchWiz stuff I missed via separate apps, and I'm pretty happy with it ever since.
Bottom Line: anyways, if you already on custom stuff with altered warranty, you must get custom recovery working first, then it will be simple.

P605 stuck at recovery booting...need help

So I just tried to flash 4.4 on my P605 (file being P605XXUCNE2_P605OXACNE2_NEE.zip).
Sadly, I forgot to tick 'phone bootloader update' in Odin, soooo....now I'm stuck on the Samsung logo with 'Recovery booting' written in blue on the top left edge.
I've searched the Net for a solution, but all the ones I've found require me to remove my battery, which is kinda impossible on the P605 without hardware modifications.
I really need some help here, as I'm sure there is another way to get to Download Mode.

Ilman said:
So I just tried to flash 4.4 on my P605 (file being P605XXUCNE2_P605OXACNE2_NEE.zip).
Sadly, I forgot to tick 'phone bootloader update' in Odin, soooo....now I'm stuck on the Samsung logo with 'Recovery booting' written in blue on the top left edge.
I've searched the Net for a solution, but all the ones I've found require me to remove my battery, which is kinda impossible on the P605 without hardware modifications.
I really need some help here, as I'm sure there is another way to get to Download Mode.
Click to expand...
Click to collapse
Flash stock JB rom,let it reboot then Flash Kitkat rom after... Flash TWRP 2.7.0.1 and let reboot, go into recovery, now should be TWRP, flash latest supersu.zip file(1.99r3). Now Kitkat, rooted and custom recovery.
If you don't want root and TWRP, skip those steps...
Just be aware you will have difficulty accessing external sd card with any but stock file manager and not all 3rd party apps will be allowed to use it (unless rooted)...

ultramag69 said:
Flash stock JB rom,let it reboot then Flash Kitkat rom after... Flash TWRP 2.7.0.1 and let reboot, go into recovery, now should be TWRP, flash latest supersu.zip file(1.99r3). Now Kitkat, rooted and custom recovery.
If you don't want root and TWRP, skip those steps...
Just be aware you will have difficulty accessing external sd card with any but stock file manager and not all 3rd party apps will be allowed to use it (unless rooted)...
Click to expand...
Click to collapse
The problem I'm currently facing is that I can't get to d/l mode, recovery or w/e. It's just stuck in a bootloop...
Thanks for the reply, tho.

Ilman said:
The problem I'm currently facing is that I can't get to d/l mode, recovery or w/e. It's just stuck in a bootloop...
Thanks for the reply, tho.
Click to expand...
Click to collapse
I had the same problem, just hold down power and down vol and get to into download mode so you can tick that bootloader update and it will work.
Took me a few goes to get it to go there... but it did work for me.. Hope that helps

I also found the flash jig for the S2 works to get to download mode...
Don't know what I mean, here's a youtube video demonstrating, just forget the bit with the battery, you just need to insert and power down - https://www.youtube.com/watch?v=V8yqWf6JU3o
Worth around $3 on ebay... Look for S2 usb jig...

jbm76 said:
I had the same problem, just hold down power and down vol and get to into download mode so you can tick that bootloader update and it will work.
Took me a few goes to get it to go there... but it did work for me.. Hope that helps
Click to expand...
Click to collapse
You must do it at the right moment between screen cycles. Took me 1 minute, but for some people here on forum it took 30.

jbm76 said:
I had the same problem, just hold down power and down vol and get to into download mode so you can tick that bootloader update and it will work.
Took me a few goes to get it to go there... but it did work for me.. Hope that helps
Click to expand...
Click to collapse
I've been trying that since yesterday, no dice.
ultramag69 said:
I also found the flash jig for the S2 works to get to download mode...
Don't know what I mean, here's a youtube video demonstrating, just forget the bit with the battery, you just need to insert and power down - https://www.youtube.com/watch?v=V8yqWf6JU3o
Worth around $3 on ebay... Look for S2 usb jig...
Click to expand...
Click to collapse
That looks like a nifty thing, minght look into one if I can't fix it the next couple of days.
xda_user_p600 said:
You must do it at the right moment between screen cycles. Took me 1 minute, but for some people here on forum it took 30.
Click to expand...
Click to collapse
What does a screen cycle mean exactly? Sorry if the question is dumb.
Edit: Just got into d/l mode.
I did that by holding Vol- and power. It restarted a couple of times but in the end it got there. Thanks for all the help.

Try Power + Volume Down + Home instead of just Power + Volume Down, there is a different if you are stuck.