Related
Hellow everyone,
I am really searching to find something good to protect my Htc One but in the same time to not make it double or triple of it;s original size.
I was seeing the Incipio Products Like Feather, Frequency And Carbon Fiber , also the Htc One Original Cases .Plus would be nice to buy these alluminiun cases??? What you would suggest me to buy. By the way along with the case i am planning to buy a screen protector like the Mime Ghost Glass for Htc one.
Your Opinions would be very helpfull.
I bought this case: http://www.amazon.com/Poetic-FlipBo...qid=1377379829&sr=8-3&keywords=htc+one+poetic
It's slim and looks good. Doesn't provide a crazy amount of protection but it's enough for me to not worry about it in my pocket or setting it down anywhere, and I like the flipbook style. You can also still use a screen protector with it.
bluetint said:
I bought this case: http://www.amazon.com/Poetic-FlipBo...qid=1377379829&sr=8-3&keywords=htc+one+poetic
It's slim and looks good. Doesn't provide a crazy amount of protection but it's enough for me to not worry about it in my pocket or setting it down anywhere, and I like the flipbook style. You can also still use a screen protector with it.
Click to expand...
Click to collapse
funny, on this link, with the phone in the case, it looks like there are cut-outs for the camera (and the noise cancellation mic), but there is on picture of the entire case without the phone in it, and there appears to be no cutouts for the camera. I would imagine that there ARE cutouts for the camera, no?
TheKaz said:
funny, on this link, with the phone in the case, it looks like there are cut-outs for the camera (and the noise cancellation mic), but there is on picture of the entire case without the phone in it, and there appears to be no cutouts for the camera. I would imagine that there ARE cutouts for the camera, no?
Click to expand...
Click to collapse
Yes, there are two cutouts on the back: one for the camera/flash and another for the mic. You're right though, the pics are misleading. I had seen this case in the wild before I bought it so I knew what I was getting. Also for that price you can't really go wrong.
Do not go incipio the design comes off and it looks like ****
Sent from my HTC One using ViperOne
SMJx said:
Do not go incipio the design comes off and it looks like ****
Sent from my HTC One using ViperOne
Click to expand...
Click to collapse
Well i was thinkinh the Incipio Dual Pro with Silicone...
Just tried a skin and bumper combo. Best compromise between protection and looks IMO. Nothing will top an otterbox for protection, but makes phone very bulky and it overheats too easily when using navigation.
http://forum.xda-developers.com/showthread.php?p=44946148
Sent from my HTC One using xda premium
http://www.amazon.de/URBAN-ARMOR-CO...377460215&sr=8-2&keywords=htc+one+hülle+urban
this one I got a few weeks back, and it is the best case I could imagine for the One! Protection all around, wrapping over the edgres where the screen is. All buttons covered solid, and these covers help to push the Power/Vol buttoms. I can only say, I am totally happy with this case! A bit pricey, but worth every penny. Gives the One a real trendy look, and is available in different colours- I got the black/black one
dreico33 said:
Well i was thinkinh the Incipio Dual Pro with Silicone...
Click to expand...
Click to collapse
I have that and the design on the back totally wears off. Do NOT NOT NOT go with those
SMJx said:
I have that and the design on the back totally wears off. Do NOT NOT NOT go with those
Click to expand...
Click to collapse
Men u got me scared now.. haha...
What you would suggest???
What about this one????
http://dx-box.com/new-htc-one-double-dip-hard-shell-case-back-cover-hc-c840.html
Or these ones???
http://tpu-cases.com/index.php?main...id=341&zenid=5f996086e5e55efe16801fe09f74e9fd
http://tpu-cases.com/index.php?main...id=338&zenid=5f996086e5e55efe16801fe09f74e9fd
dreico33 said:
Men u got me scared now.. haha...
What you would suggest???
What about this one????
http://dx-box.com/new-htc-one-double-dip-hard-shell-case-back-cover-hc-c840.html
Or these ones???
http://tpu-cases.com/index.php?main...id=341&zenid=5f996086e5e55efe16801fe09f74e9fd
http://tpu-cases.com/index.php?main...id=338&zenid=5f996086e5e55efe16801fe09f74e9fd
Click to expand...
Click to collapse
Those look much nicer, there is no design to wear off, check out UAG though.
dreico33 said:
Well i was thinkinh the Incipio Dual Pro with Silicone...
Click to expand...
Click to collapse
I had this case and I don't know if anyone else had this problem but whenever I took a picture with the flash there was a tinge around the picture from the silicone of the case.
Sent from my HTC One using XDA Premium 4 mobile app
Check this one : http://www.rockphone.cn/en/Html/Product/507.html
I really like it, slim, look good.
I have the orange and black.
I have tried these cases/covers
KLD Series ENLAND
http://www.youtube.com/watch?feature...&v=xggUZCcBcww
Diztronic
http://tpu-cases.com/index.php?main_...ex&cPath=48_86
Case Mate
http://www.case-mate.eu/smartphone/htc/htc-one.html
Rock
http://www.rockphone.cn/en/Plus/Sear...p?pID=12&bID=0
Spigen Ultra Thin Air
http://www.spigen.com/cell-phone/htc/htc-one.html
Poetic Atmosphere
http://www.yourpoetic.com/c/77/htc-one-m7
Meifeng Matte Hard Skin Cover Case
http://www.youtube.com/watch?v=A1G-Tc72ZvQ
You can get these in any size you want, Just send the measurements with the case/phone
Leather HTC One Wallet case
http://www.etsy.com/listing/12804165...e?ref=col_view
HTC ONE leather case - Italian leather
http://www.etsy.com/listing/15309752...r?ref=col_view
Simple black leather iPhone wallet case
http://www.etsy.com/listing/11499042...e?ref=col_view
Hip iphone wallet
http://www.etsy.com/listing/86702111...k?ref=col_view
Steampunk smart phone
http://www.etsy.com/listing/11228484...n?ref=col_view
Leather iPhone case
http://www.etsy.com/listing/15394704...4?ref=col_view
iPhone/iPod Case - Charcoal Wool Felt and Black Leather
http://www.etsy.com/listing/64894463...d?ref=col_view
Official Smoke Case
by OnePlus
Official Flip Case
by OnePlus
Official Clear Case
by OnePlus
InvisiCase
by Orzly
ExecArmour
by Orzly
Wallet Case
by Orzly
FlexiCase
by Orzly
FlexiSlim
by Orzly
FlexiCase Blue
by Orzly
Fusion Bumper
by Orzly
Lucion
by Tudia
Arch
by Tudia
I picked up the Ringke Fusion Clear case off Amazon. I am very disappointed by the whole thing. It does not fit the 1+2 in almost every detail. The case does not extend beyond the screen so if placed face down the screen will touch table or counters surface. I tried to show pictures off the main misalignments.
ghettopops said:
I picked up the Ringke Fusion Clear case off Amazon. I am very disappointed by the whole thing. It does not fit the 1+2 in almost every detail. The case does not extend beyond the screen so if placed face down the screen will touch table or counters surface. I tried to show pictures off the main misalignments.
Click to expand...
Click to collapse
Jeez, that's pretty bad. I had always thought Rinke was on point with its precision and stuff, thanks for posting!
Waterdroid said:
Jeez, that's pretty bad. I had always thought Rinke was on point with its precision and stuff, thanks for posting!
Click to expand...
Click to collapse
I sent them an email with the same photo's, they are refunding my money. Pretty stand up.
Now I need to find a bumper.
Here you go!
I ordered orzly fusion bumper case, its on the way.
Sent from my ONE A2003 using Tapatalk
ghettopops said:
I picked up the Ringke Fusion Clear case off Amazon. I am very disappointed by the whole thing. It does not fit the 1+2 in almost every detail. The case does not extend beyond the screen so if placed face down the screen will touch table or counters surface. I tried to show pictures off the main misalignments.
Click to expand...
Click to collapse
Thats a shame! I just got in the Orzly fusions and they fit way better than that
Space saver
Waterdroid said:
Jeez, that's pretty bad. I had always thought Rinke was on point with its precision and stuff, thanks for posting!
Click to expand...
Click to collapse
DustinDep said:
Thats a shame! I just got in the Orzly fusions and they fit way better than that
Click to expand...
Click to collapse
Last I looked didn't that case take like 3+ weeks for delivery?
I just got my OP2 and my accessories at the same time now! I have the Dual Layer Defender Protective Case Cover with Kickstand and damn it's bulky and hard to hold in my hand. I had a MI3 and OPO naked before (broke both phones and now I've learned my lesson) but I've been stuck with a 5C for a week. Hopefully I get used to the size and heft again of a 5.5", though this is the heaviest phone of all...
http://www.amazon.com/gp/product/B00YM3WQ12?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00'
I get One Plus's translucent gray case tomorrow.
https://oneplus.net/oneplus-2-translucent-gray-case
Mersine said:
I just got my OP2 and my accessories at the same time now! I have the Dual Layer Defender Protective Case Cover with Kickstand and damn it's bulky and hard to hold in my hand. I had a MI3 and OPO naked before (broke both phones and now I've learned my lesson) but I've been stuck with a 5C for a week. Hopefully I get used to the size and heft again of a 5.5", though this is the heaviest phone of all...
http://www.amazon.com/gp/product/B00YM3WQ12?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00'
I get One Plus's translucent gray case tomorrow.
https://oneplus.net/oneplus-2-translucent-gray-case
Click to expand...
Click to collapse
Why don't you look at tudia or better otterbox
Sent from my SM-G900H using XDA Free mobile app
I returned the Dual Layer Defender Protective Case Cover with Kickstand because it's too bulky and really like the One Plus's translucent gray case
Mersine said:
I get One Plus's translucent gray case tomorrow.
https://oneplus.net/oneplus-2-translucent-gray-case
Click to expand...
Click to collapse
Many reviews of the gray case put it over stylecover but webstie says "Please note that to use this case you will need to remove the device's StyleSwap Cover as it is designed to snugly contour the OnePlus 2 without adding extra bulk." could you put picture with this case as recommended by one plus ? I am interested in i=this one
cedric1918 said:
Many reviews of the gray case put it over stylecover but webstie says "Please note that to use this case you will need to remove the device's StyleSwap Cover as it is designed to snugly contour the OnePlus 2 without adding extra bulk." could you put picture with this case as recommended by one plus ? I am interested in i=this one
Click to expand...
Click to collapse
I've attached pictures of my phone and the case with my stock back cover and without (you can see my serial). It is very weird without. I can definitely feel the back as hollow and missing something. I'd advise to keep it on, it is as slim as can be. That's odd the website would say that if it fits without the back cover on.
I bought the Diztronic tpu case because I had it for the OnePlus and was very satisfied. Although it is roughly the same case as for the opo the finishing is not as good. There is a shiny edge where the camera is, which could have worked out great but just is not. The case is also not as tight as for the opo and corners will slip off the phone when getting it out of your pocket. On the other hand the case is still from a very durable shock absorbing material and the edge that stands out over the screen makes sure that the glass doesn't shatter when you drop it. The thing I like about it most is the fact that it simply makes the OnePlus look more humble. No thrills just a nice phone. All and all a good case but not as good as its predecessor.
im not happy with this at all..i have the black apricot..it is quite a bit thicker than the sandstone..im very disappointed in oneplus to sell styleswaps with different thicknesses..
I have both the orzly invisicase and fusion bumper..
with the invisicase..it loses the facedown protection..the screen comes out on top of the edges..because its too tight..the corners/edges will slipp off with a small touch..
with the fusion bumper..you clearly see it doesnt fit the contours of the device..especially at the cutouts and the top&bottom..
also the cutout for the usb port is too small for the standard oneplus cable (have to use some force) ..while its cut perfectly for the usb cables orzly is selling..
basically..these cases are only designed to use with the standard sandstone styleswap while intended for the other styleswaps..
Has anyone got the spigen rugged case?
rosswaa said:
Has anyone got the spigen rugged case?
Click to expand...
Click to collapse
I also want to know this...
Sent from my ONE A2005 using XDA Free mobile app
Talesofanobody said:
I also want to know this...
Sent from my ONE A2005 using XDA Free mobile app
Click to expand...
Click to collapse
I've just ordered it, so if no one else does I'll get a mini review type thing when it arrives sorted
rosswaa said:
I've just ordered it, so if no one else does I'll get a mini review type thing when it arrives sorted
Click to expand...
Click to collapse
Alright, thanks
Sent from my ONEPLUS A2005
I have this phone and I just recently bought dbrand skin, but would like a bumper case with no back on it. Meaning just the outside edges only. Anyone know of where there could be one?
I'm also looking for one... subscribing. I had one on my HTC 10 that I really liked (RhinoShield CrashGuard) - but they don't seem to make them for LG phones. Looking for something similar to that. Please update if you find one!
Im trying to find one too if not i might order a really flexible cristal clear case and put it on or maybe order one of the "bumper" cases that have a tranparent back and just cut the back
looking for it as well, no result till now
I have this one and love it. Could easily be cut with a sharp razor to be a bumper case with possibly leaving the back wire frame on it. Look at this on eBay http://www.ebay.com/itm/371888746421
lg3FTW said:
I have this one and love it. Could easily be cut with a sharp razor to be a bumper case with possibly leaving the back wire frame on it. Look at this on eBay http://www.ebay.com/itm/371888746421
Click to expand...
Click to collapse
I doubt the thin blue frame would be that secure without the case? I could be wrong. If anyone finds one update this thread, they can have my money in a heartbeat.
Hi guys
I've just found and ordered a bumper for our lg g6
https://www.macoque.com/lg-g6/11089...et-dos-brosse-amovibles.html#/couleur-argente
monkeydrufy said:
Hi guys
I've just found and ordered a bumper for our lg g6
https://www.macoque.com/lg-g6/11089...et-dos-brosse-amovibles.html#/couleur-argente
Click to expand...
Click to collapse
I'm not a fan of the clasp closing one's and I'd prefer a more robust silicone with a big lip but as it's all we have I may give it a go. Have you ordered one?
yep, ordered 2 differents colors
Please let us know with a few details on what they're like once you've received them, Monkeydrufy.
I've had that type of case on my honor 8 (the last one posted in silver and black).
It was terrible. Not a real bumper, and it's so deep I could hardly get my finger in the hole to unlock it.
Maybe this version will be better, I'm not sure, I haven't used it, but I certainly would not recommend it.
I would love to see a RhinoShield bumper even on G6, sadly they only make them for galaxy and iphone..
the_rooter said:
I have this phone and I just recently bought dbrand skin, but would like a bumper case with no back on it. Meaning just the outside edges only. Anyone know of where there could be one?
Click to expand...
Click to collapse
I actually found one with a back that feels and looks HELLA AMAZING, I also was looking for one with no back line the rhino sheild but I would easily give up the open back for the this case ( I-Balson bumper case for lg g6)
I'm also looking but can't find one even on aliexpress.
the fit was actually pretty good on the G6. I think it's because of the chamfered edges. The fit on my iPhone 7 Plus was horrible because of the rounded edges. I didn't like how the fit and finish wasn't quite as perfect as my OCD demands. I ripped that one off practically immediately. On my HTC 10 I had a Nude wrap that was terrible because the glue on it could be seen right thru the clear skin as well as all the slight imperfections. It just made a gorgeous device look pitted and ugly. So for the LG G6 I got a skin that wasn't see thru but had a design. I got the StormTrooper because I felt it complemented the platinum G6 well. I only wanted the back skin but unfortunately they only sell the set. This is probably the first SW skin I'm happy with. Check out my YT vid here:
https://youtu.be/LXDYSZcsEgQ
Sent from my LG-H872 using Tapatalk
Good write up man. Looks good [emoji108]
Sent from my iPhone using Tapatalk
Nice!
I'm a bit tempted by their real leather ones. They look pretty nice.
blaine07 said:
Good write up man. Looks good [emoji108]
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Thanks Blaine!
Obscure Reference said:
Nice!
I'm a bit tempted by their real leather ones. They look pretty nice.
Click to expand...
Click to collapse
Yup, the leather ones look good. I'm tempted to order one of those too but I'm hoping dbrand comes out with a few other colors in leather because theirs are less expensive and the quality is pretty good.
Sent from my LG-H872 using Tapatalk
jlczl said:
Thanks Blaine!
Yup, the leather ones look good. I'm tempted to order one of those too but I'm hoping dbrand comes out with a few other colors in leather because theirs are less expensive and the quality is pretty good.
Sent from my LG-H872 using Tapatalk
Click to expand...
Click to collapse
Dbrand is nice, but they don't have any real leather (or wood for that matter) skins, just leather textured ones.
Then again, you probably couldn't fit the phone in a case after sticking some leather on it's back either so both versions have their pros and cons.
Thanks for that video... I have actually ordered the slickwraps and waiting to be shipped to Canada...
Edit: I got mine and put it on... Looks real nice, and I credit myself for doing a good job
I got a Dbrand sticker for mine, just to cover the ugly fingerprint magnet shiny black back, because I don't use a case. It looks really great and it fits perfectly, without interfering at all with the fingerprint reader or camera.
I got a Carbon for mine from SW, it's pretty good. Usually go with DBrand but they don't offer any options for the sides.
Huge Thanks!
LG G6 = Indian Unit (870DS) || Skin = [MENTION]Slickwrap[/MENTION] - Dark Brown NATURAL SERIES WRAPS || Side Skin = GT-5000 Grip Tape || Launcher = Action Launcher
Just want to throw this out there for those who are considering a leather skin.
The leather skin is of great quality, but it is rather thick and will not be compatible with most cases. They are different from Dbrand leather skins in that respect. The quality, as i said, is great, but due to the thickness they dont fit with cases. I would estimate that the skin adds about 2 mm of thickness to the back.
mixxy said:
Just want to throw this out there for those who are considering a leather skin.
The leather skin is of great quality, but it is rather thick and will not be compatible with most cases. They are different from Dbrand leather skins in that respect. The quality, as i said, is great, but due to the thickness they dont fit with cases. I would estimate that the skin adds about 2 mm of thickness to the back.
Click to expand...
Click to collapse
You are right, I haven't been able to use any case with the leather skin. But man this phone feels so good without a case. The leather nails how it looks !!!!!!!!!!!!
So I have a clear case and I had a receipt in it...So a friend of mine thought I had the new Pixel phone What if there was a Pixel skin? Would you use it?
treezy26 said:
So I have a clear case and I had a receipt in it...So a friend of mine thought I had the new Pixel phone What if there was a Pixel skin? Would you use it?
Click to expand...
Click to collapse
No.
You can make any skin a pixel skin; cut the top off.
Just to let you guys know, Slickwraps currently has a 50% off sale!
And thanks for all the info in here. Since my G6's glass back is already pretty scratched after a few months of use and as it's the worst fingerprint magnet ever, those back wraps look like the perfect solution.
Just wanted to share my Ringke TPU Clear case with some Dbrand on top of it! Cause i want to take care of my pixel 2 xl!
fullmetal509 said:
Just wanted to share my Ringke TPU Clear case with some Dbrand on top of it! Cause i want to take care of my pixel 2 xl!
Click to expand...
Click to collapse
This is very nice, how do u actually do this? You just ordered a regular sized pixel 2 XL dbrand skin and stick it on ringke's tpu?
Sent from my Comm Badge from Starfleet in far away Galaxy...
That's actually pretty smart, I ruined a Slickwraps kit when removing my case from the phone. If I only had thought this before...
Elite said:
This is very nice, how do u actually do this? You just ordered a regular sized pixel 2 XL dbrand skin and stick it on ringke's tpu?
Sent from my Comm Badge from Starfleet in far away Galaxy...
Click to expand...
Click to collapse
Just used a normal skin followed this video https://www.youtube.com/watch?v=Hyim3wvqiiQ&t=248s&list=FL5KILDo_MVlEOhwgX-apDJw&index=8
allweknowisa said:
That's actually pretty smart, I ruined a Slickwraps kit when removing my case from the phone. If I only had thought this before...
Click to expand...
Click to collapse
same here, when i do want to use a case, and ruins the edge corners and sides. and my favorite case is the ringke case, since its slim and not too bulky, just the clear part gets alot fingerprint smudges which drive me crazy!
Looks awesome! Might have to try this out.
I wish these skin companies would make some kind of "easy application" system where they would make skins that can be put on/applied to a case like the MNML or PEEL ones so it would be easy to take on/off your device while still remaining relatively thin. This way you get coverage of the back and sides, unlike the way the OP did it for their case where it's only the back.